/* Update sr_strerror()/sr_strerror_name() (error.c) upon changes! */
};
+/** Ternary return type for DMM/LCR/etc packet parser validity checks. */
+enum sr_valid_code {
+ SR_PACKET_INVALID = -1, /**< Certainly invalid. */
+ SR_PACKET_VALID = 0, /**< Certainly valid. */
+ SR_PACKET_NEED_RX = +1, /**< Need more RX data. */
+};
+
#define SR_MAX_CHANNELNAME_LEN 32
/* Handy little macros */
SR_T_DOUBLE_RANGE,
SR_T_INT32,
SR_T_MQ,
+ SR_T_UINT32,
/* Update sr_variant_type_get() (hwdriver.c) upon changes! */
};
gboolean is_float;
gboolean is_bigendian;
/**
- * Number of significant digits after the decimal point if positive,
- * or number of non-significant digits before the decimal point if
- * negative (refers to the value we actually read on the wire).
+ * Number of significant digits after the decimal point, if positive.
+ * When negative, exponent with reversed polarity that is necessary to
+ * express the value with all digits without a decimal point.
+ * Refers to the value we actually read on the wire.
+ *
+ * Examples:
+ *
+ * | Disp. value | Exp. notation | Exp. not. normalized | digits |
+ * |-------------|---------------------|----------------------|--------|
+ * | 12.34 MOhm | 1.234 * 10^7 Ohm | 1234 * 10^4 Ohm | -4 |
+ * | 1.2345 MOhm | 1.2345 * 10^6 Ohm | 12345 * 10^2 Ohm | -2 |
+ * | 123.4 kOhm | 1.234 * 10^5 Ohm | 1234 * 10^2 Ohm | -2 |
+ * | 1234 Ohm | 1.234 * 10^3 Ohm | 1234 * 10^0 Ohm | 0 |
+ * | 12.34 Ohm | 1.234 * 10^1 Ohm | 1234 * 10^-2 Ohm | 2 |
+ * | 0.0123 Ohm | 1.23 * 10^-2 Ohm | 123 * 10^-4 Ohm | 4 |
+ * | 1.234 pF | 1.234 * 10^-12 F | 1234 * 10^-15 F | 15 |
*/
int8_t digits;
gboolean is_digits_decimal;
struct sr_analog_spec {
/**
- * Number of significant digits after the decimal point if positive,
- * or number of non-significant digits before the decimal point if
- * negative (refers to vendor specifications/datasheet or actual
- * device display).
+ * Number of significant digits after the decimal point, if positive.
+ * When negative, exponent with reversed polarity that is necessary to
+ * express the value with all digits without a decimal point.
+ * Refers to vendor specifications/datasheet or actual device display.
+ *
+ * Examples:
+ *
+ * | On the wire | Exp. notation | Exp. not. normalized | spec_digits |
+ * |-------------|---------------------|----------------------|-------------|
+ * | 12.34 MOhm | 1.234 * 10^7 Ohm | 1234 * 10^4 Ohm | -4 |
+ * | 1.2345 MOhm | 1.2345 * 10^6 Ohm | 12345 * 10^2 Ohm | -2 |
+ * | 123.4 kOhm | 1.234 * 10^5 Ohm | 1234 * 10^2 Ohm | -2 |
+ * | 1234 Ohm | 1.234 * 10^3 Ohm | 1234 * 10^0 Ohm | 0 |
+ * | 12.34 Ohm | 1.234 * 10^1 Ohm | 1234 * 10^-2 Ohm | 2 |
+ * | 0.0123 Ohm | 1.23 * 10^-2 Ohm | 123 * 10^-4 Ohm | 4 |
+ * | 1.234 pF | 1.234 * 10^-12 F | 1234 * 10^-15 F | 15 |
*/
int8_t spec_digits;
};
/** The device can measure power. */
SR_CONF_POWERMETER,
+ /**
+ * The device can switch between multiple sources, e.g. a relay actuator
+ * or multiplexer.
+ */
+ SR_CONF_MULTIPLEXER,
+
/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
/*--- Driver scan options -------------------------------------------*/
*/
SR_CONF_FORCE_DETECT,
+ /**
+ * Override builtin probe names from user specs.
+ *
+ * Users may want to override the names which are assigned to
+ * probes during scan (these usually match the vendor's labels
+ * on the device). This avoids the interactive tedium of
+ * changing channel names after device creation and before
+ * protocol decoder attachment. Think of IEEE488 recorders or
+ * parallel computer bus loggers. The scan option eliminates
+ * the issue of looking up previously assigned names before
+ * renaming a channel (see sigrok-cli -C), which depends on
+ * the device as well as the application, and is undesirable.
+ * The scan option is limited to those drivers which implement
+ * support for it, but works identically across those drivers.
+ *
+ * The value is a string, either a comma separated list of
+ * probe names, or an alias for a typical set of names.
+ */
+ SR_CONF_PROBE_NAMES,
+
/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
/*--- Device (or channel group) configuration -----------------------*/
/** The number of digits (e.g. for a DMM). */
SR_CONF_DIGITS,
+ /** Phase of a source signal. */
+ SR_CONF_PHASE,
+
+ /** Duty cycle of a source signal. */
+ SR_CONF_DUTY_CYCLE,
+
+ /**
+ * Current power.
+ * @arg type: double
+ * @arg get: get measured power
+ */
+ SR_CONF_POWER,
+
+ /**
+ * Power target.
+ * @arg type: double
+ * @arg get: get power target
+ * @arg set: change power target
+ */
+ SR_CONF_POWER_TARGET,
+
+ /**
+ * Resistance target.
+ * @arg type: double
+ * @arg get: get resistance target
+ * @arg set: change resistance target
+ */
+ SR_CONF_RESISTANCE_TARGET,
+
/* Update sr_key_info_config[] (hwdriver.c) upon changes! */
/*--- Special stuff -------------------------------------------------*/