/** Status/error codes returned by libsigrok functions. */
enum sr_error_code {
+ SR_OK_CONTINUE = 1, /**< Keep going. */
SR_OK = 0, /**< No error. */
SR_ERR = -1, /**< Generic/unspecified error. */
SR_ERR_MALLOC = -2, /**< Malloc/calloc/realloc error. */
SR_ERR_DEV_CLOSED = -7, /**< Device is closed, but must be open. */
SR_ERR_TIMEOUT = -8, /**< A timeout occurred. */
SR_ERR_CHANNEL_GROUP = -9, /**< A channel group must be specified. */
+ SR_ERR_DATA =-10, /**< Data is invalid. */
/*
* Note: When adding entries here, don't forget to also update the
GSList *values;
};
-/** Input (file) format struct. */
-struct sr_input {
- /**
- * A pointer to this input format's 'struct sr_input_format'.
- * The frontend can use this to call the module's callbacks.
- */
- struct sr_input_format *format;
-
- GHashTable *param;
-
- struct sr_dev_inst *sdi;
-
- void *internal;
-};
-
-/** Input (file) format driver. */
-struct sr_input_format {
- /** The unique ID for this input format. Must not be NULL. */
- char *id;
-
- /**
- * A short description of the input format, which can (for example)
- * be displayed to the user by frontends. Must not be NULL.
- */
- char *description;
-
- /**
- * Check if this input module can load and parse the specified file.
- *
- * @param[in] filename The name (and path) of the file to check.
- *
- * @retval TRUE This module knows the format.
- * @retval FALSE This module does not know the format.
- */
- int (*format_match) (const char *filename);
-
- /**
- * Initialize the input module.
- *
- * @param in A pointer to a valid 'struct sr_input' that the caller
- * has to allocate and provide to this function. It is also
- * the responsibility of the caller to free it later.
- * @param[in] filename The name (and path) of the file to use.
- *
- * @retval SR_OK Success
- * @retval other Negative error code.
- */
- int (*init) (struct sr_input *in, const char *filename);
-
- /**
- * Load a file, parsing the input according to the file's format.
- *
- * This function will send datafeed packets to the session bus, so
- * the calling frontend must have registered its session callbacks
- * beforehand.
- *
- * The packet types sent across the session bus by this function must
- * include at least SR_DF_HEADER, SR_DF_END, and an appropriate data
- * type such as SR_DF_LOGIC. It may also send a SR_DF_TRIGGER packet
- * if appropriate.
- *
- * @param in A pointer to a valid 'struct sr_input' that the caller
- * has to allocate and provide to this function. It is also
- * the responsibility of the caller to free it later.
- * @param filename The name (and path) of the file to use.
- *
- * @retval SR_OK Success
- * @retval other Negative error code.
- */
- int (*loadfile) (struct sr_input *in, const char *filename);
-};
-
+struct sr_input;
+struct sr_input_module;
struct sr_output;
struct sr_output_module;
gboolean enabled;
/** Name of channel. */
char *name;
+ /** Private data for driver use. */
+ void *priv;
};
/** Structure for groups of channels that have common properties. */
/** The device supports setting the number of analog channels. */
SR_CONF_NUM_ANALOG_CHANNELS,
- /** Output voltage. */
+ /**
+ * Output voltage.
+ * @arg type: double
+ * @arg get: get output voltage
+ */
SR_CONF_OUTPUT_VOLTAGE,
- /** Maximum output voltage. */
+ /**
+ * Maximum output voltage.
+ * @arg type: double
+ * @arg get: get maximum output voltage limit
+ * @arg set: change output voltage limit
+ */
SR_CONF_OUTPUT_VOLTAGE_MAX,
- /** Output current. */
+ /**
+ * Output current.
+ * @arg type: double
+ * @arg get: get output current
+ */
SR_CONF_OUTPUT_CURRENT,
- /** Maximum output current. */
+ /**
+ * Maximum output current.
+ * @arg type: double
+ * @arg get: get maximum output voltage limit
+ * @arg set: change output voltage limit
+ */
SR_CONF_OUTPUT_CURRENT_MAX,
- /** Enabling/disabling output. */
+ /**
+ * Enabling/disabling output.
+ * @arg type: boolean
+ * @arg get: @b true if currently enabled
+ * @arg set: enable/disable
+ */
SR_CONF_OUTPUT_ENABLED,
- /** Channel output configuration. */
- SR_CONF_OUTPUT_CHANNEL,
+ /**
+ * Output channel configuration.
+ * @arg type: string
+ * @arg get: get current setting
+ * @arg set: change current setting
+ * @arg list: array of possible values
+ */
+ SR_CONF_OUTPUT_CHANNEL_CONFIG,
- /** Over-voltage protection (OVP) */
- SR_CONF_OVER_VOLTAGE_PROTECTION,
+ /**
+ * Over-voltage protection (OVP) feature
+ * @arg type: boolean
+ * @arg get: @b true if currently enabled
+ * @arg set: enable/disable
+ */
+ SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED,
- /** Over-current protection (OCP) */
- SR_CONF_OVER_CURRENT_PROTECTION,
+ /**
+ * Over-voltage protection (OVP) active
+ * @arg type: boolean
+ * @arg get: @b true if device has activated OVP, i.e. the output voltage
+ * exceeds the over-voltage protection threshold.
+ */
+ SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE,
+
+ /**
+ * Over-voltage protection (OVP) threshold
+ * @arg type: double (voltage)
+ * @arg get: get current threshold
+ * @arg set: set new threshold
+ */
+ SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD,
+
+ /**
+ * Over-current protection (OCP) feature
+ * @arg type: boolean
+ * @arg get: @b true if currently enabled
+ * @arg set: enable/disable
+ */
+ SR_CONF_OVER_CURRENT_PROTECTION_ENABLED,
+
+ /**
+ * Over-current protection (OCP) active
+ * @arg type: boolean
+ * @arg get: @b true if device has activated OCP, i.e. the output current
+ * exceeds the over-current protection threshold.
+ */
+ SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE,
+
+ /**
+ * Over-current protection (OCP) threshold
+ * @arg type: double (current)
+ * @arg get: get current threshold
+ * @arg set: set new threshold
+ */
+ SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD,
/** Choice of clock edge for external clock ("r" or "f"). */
SR_CONF_CLOCK_EDGE,
+ /** Amplitude of a source without strictly-defined MQ. */
+ SR_CONF_AMPLITUDE,
+
+ /**
+ * Output channel regulation
+ * get: "CV", "CC" or "UR", denoting constant voltage, constant current
+ * or unregulated.
+ */
+ SR_CONF_OUTPUT_REGULATION,
+
+ /** Over-temperature protection (OTP) */
+ SR_CONF_OVER_TEMPERATURE_PROTECTION,
+
/*--- Special stuff -------------------------------------------------*/
/** Scan options supported by the driver. */