/** Status/error codes returned by libsigrok functions. */
enum sr_error_code {
+ SR_OK_CONTINUE = 1, /**< Keep going. */
SR_OK = 0, /**< No error. */
SR_ERR = -1, /**< Generic/unspecified error. */
SR_ERR_MALLOC = -2, /**< Malloc/calloc/realloc error. */
SR_ERR_DEV_CLOSED = -7, /**< Device is closed, but must be open. */
SR_ERR_TIMEOUT = -8, /**< A timeout occurred. */
SR_ERR_CHANNEL_GROUP = -9, /**< A channel group must be specified. */
+ SR_ERR_DATA =-10, /**< Data is invalid. */
/*
* Note: When adding entries here, don't forget to also update the
float *data;
};
-/** Input (file) format struct. */
-struct sr_input {
- /**
- * A pointer to this input format's 'struct sr_input_format'.
- * The frontend can use this to call the module's callbacks.
- */
- struct sr_input_format *format;
-
- GHashTable *param;
-
- struct sr_dev_inst *sdi;
-
- void *internal;
-};
-
-/** Input (file) format driver. */
-struct sr_input_format {
- /** The unique ID for this input format. Must not be NULL. */
+/** Generic option struct used by various subsystems. */
+struct sr_option {
+ /* Short name suitable for commandline usage, [a-z0-9-]. */
char *id;
-
- /**
- * A short description of the input format, which can (for example)
- * be displayed to the user by frontends. Must not be NULL.
- */
- char *description;
-
- /**
- * Check if this input module can load and parse the specified file.
- *
- * @param[in] filename The name (and path) of the file to check.
- *
- * @retval TRUE This module knows the format.
- * @retval FALSE This module does not know the format.
- */
- int (*format_match) (const char *filename);
-
- /**
- * Initialize the input module.
- *
- * @param in A pointer to a valid 'struct sr_input' that the caller
- * has to allocate and provide to this function. It is also
- * the responsibility of the caller to free it later.
- * @param[in] filename The name (and path) of the file to use.
- *
- * @retval SR_OK Success
- * @retval other Negative error code.
- */
- int (*init) (struct sr_input *in, const char *filename);
-
- /**
- * Load a file, parsing the input according to the file's format.
- *
- * This function will send datafeed packets to the session bus, so
- * the calling frontend must have registered its session callbacks
- * beforehand.
- *
- * The packet types sent across the session bus by this function must
- * include at least SR_DF_HEADER, SR_DF_END, and an appropriate data
- * type such as SR_DF_LOGIC. It may also send a SR_DF_TRIGGER packet
- * if appropriate.
- *
- * @param in A pointer to a valid 'struct sr_input' that the caller
- * has to allocate and provide to this function. It is also
- * the responsibility of the caller to free it later.
- * @param filename The name (and path) of the file to use.
- *
- * @retval SR_OK Success
- * @retval other Negative error code.
- */
- int (*loadfile) (struct sr_input *in, const char *filename);
-};
-
-/** Output (file) format struct. */
-struct sr_output {
- /** A pointer to this output's format. */
- struct sr_output_format *format;
-
- /**
- * The device for which this output module is creating output. This
- * can be used by the module to find out channel names and numbers.
- */
- const struct sr_dev_inst *sdi;
-
- /**
- * An optional parameter which the frontend can pass in to the
- * output module. How the string is interpreted is entirely up to
- * the module.
- */
- GHashTable *params;
-
- /**
- * A generic pointer which can be used by the module to keep internal
- * state between calls into its callback functions.
- *
- * For example, the module might store a pointer to a chunk of output
- * there, and only flush it when it reaches a certain size.
- */
- void *internal;
+ /* Short name suitable for GUI usage, can contain UTF-8. */
+ char *name;
+ /* Description of the option, in a sentence. */
+ char *desc;
+ /* Default value for this option. */
+ GVariant *def;
+ /* List of possible values, if this is an option with few values. */
+ GSList *values;
};
-/** Output (file) format driver. */
-struct sr_output_format {
- /**
- * A unique ID for this output format. Must not be NULL.
- *
- * It can be used by frontends to select this output format for use.
- *
- * For example, calling sigrok-cli with <code>-O hex</code> will
- * select the hexadecimal text output format.
- */
- char *id;
-
- /**
- * A short description of the output format. Must not be NULL.
- *
- * This can be displayed by frontends, e.g. when selecting the output
- * format for saving a file.
- */
- char *description;
-
- /**
- * This function is called once, at the beginning of an output stream.
- *
- * The device struct will be available in the output struct passed in,
- * as well as the param field -- which may be NULL or an empty string,
- * if no parameter was passed.
- *
- * The module can use this to initialize itself, create a struct for
- * keeping state and storing it in the <code>internal</code> field.
- *
- * @param o Pointer to the respective 'struct sr_output'.
- *
- * @retval SR_OK Success
- * @retval other Negative error code.
- */
- int (*init) (struct sr_output *o);
-
- /**
- * This function is passed a copy of every packed in the data feed.
- * Any output generated by the output module in response to the
- * packet should be returned in a newly allocated GString
- * <code>out</code>, which will be freed by the caller.
- *
- * Packets not of interest to the output module can just be ignored,
- * and the <code>out</code> parameter set to NULL.
- *
- * @param o Pointer to the respective 'struct sr_output'.
- * @param sdi The device instance that generated the packet.
- * @param packet The complete packet.
- * @param out A pointer where a GString * should be stored if
- * the module generates output, or NULL if not.
- *
- * @retval SR_OK Success
- * @retval other Negative error code.
- */
- int (*receive) (struct sr_output *o,
- const struct sr_datafeed_packet *packet, GString **out);
-
- /**
- * This function is called after the caller is finished using
- * the output module, and can be used to free any internal
- * resources the module may keep.
- *
- * @retval SR_OK Success
- * @retval other Negative error code.
- */
- int (*cleanup) (struct sr_output *o);
-};
+struct sr_input;
+struct sr_input_module;
+struct sr_output;
+struct sr_output_module;
/** Constants for channel type. */
enum sr_channeltype {
gboolean enabled;
/** Name of channel. */
char *name;
+ /** Private data for driver use. */
+ void *priv;
};
/** Structure for groups of channels that have common properties. */
/** The device supports setting the number of analog channels. */
SR_CONF_NUM_ANALOG_CHANNELS,
- /** Output voltage. */
+ /**
+ * Output voltage.
+ * @arg type: double
+ * @arg get: get output voltage
+ */
SR_CONF_OUTPUT_VOLTAGE,
- /** Maximum output voltage. */
+ /**
+ * Maximum output voltage.
+ * @arg type: double
+ * @arg get: get maximum output voltage limit
+ * @arg set: change output voltage limit
+ */
SR_CONF_OUTPUT_VOLTAGE_MAX,
- /** Output current. */
+ /**
+ * Output current.
+ * @arg type: double
+ * @arg get: get output current
+ */
SR_CONF_OUTPUT_CURRENT,
- /** Maximum output current. */
+ /**
+ * Maximum output current.
+ * @arg type: double
+ * @arg get: get maximum output voltage limit
+ * @arg set: change output voltage limit
+ */
SR_CONF_OUTPUT_CURRENT_MAX,
- /** Enabling/disabling output. */
+ /**
+ * Enabling/disabling output.
+ * @arg type: boolean
+ * @arg get: @b true if currently enabled
+ * @arg set: enable/disable
+ */
SR_CONF_OUTPUT_ENABLED,
- /** Channel output configuration. */
- SR_CONF_OUTPUT_CHANNEL,
+ /**
+ * Output channel configuration.
+ * @arg type: string
+ * @arg get: get current setting
+ * @arg set: change current setting
+ * @arg list: array of possible values
+ */
+ SR_CONF_OUTPUT_CHANNEL_CONFIG,
+
+ /**
+ * Over-voltage protection (OVP) feature
+ * @arg type: boolean
+ * @arg get: @b true if currently enabled
+ * @arg set: enable/disable
+ */
+ SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED,
+
+ /**
+ * Over-voltage protection (OVP) active
+ * @arg type: boolean
+ * @arg get: @b true if device has activated OVP, i.e. the output voltage
+ * exceeds the over-voltage protection threshold.
+ */
+ SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE,
+
+ /**
+ * Over-voltage protection (OVP) threshold
+ * @arg type: double (voltage)
+ * @arg get: get current threshold
+ * @arg set: set new threshold
+ */
+ SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD,
+
+ /**
+ * Over-current protection (OCP) feature
+ * @arg type: boolean
+ * @arg get: @b true if currently enabled
+ * @arg set: enable/disable
+ */
+ SR_CONF_OVER_CURRENT_PROTECTION_ENABLED,
- /** Over-voltage protection (OVP) */
- SR_CONF_OVER_VOLTAGE_PROTECTION,
+ /**
+ * Over-current protection (OCP) active
+ * @arg type: boolean
+ * @arg get: @b true if device has activated OCP, i.e. the output current
+ * exceeds the over-current protection threshold.
+ */
+ SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE,
- /** Over-current protection (OCP) */
- SR_CONF_OVER_CURRENT_PROTECTION,
+ /**
+ * Over-current protection (OCP) threshold
+ * @arg type: double (current)
+ * @arg get: get current threshold
+ * @arg set: set new threshold
+ */
+ SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD,
/** Choice of clock edge for external clock ("r" or "f"). */
SR_CONF_CLOCK_EDGE,
+ /** Amplitude of a source without strictly-defined MQ. */
+ SR_CONF_AMPLITUDE,
+
+ /**
+ * Output channel regulation
+ * get: "CV", "CC" or "UR", denoting constant voltage, constant current
+ * or unregulated.
+ */
+ SR_CONF_OUTPUT_REGULATION,
+
+ /** Over-temperature protection (OTP) */
+ SR_CONF_OVER_TEMPERATURE_PROTECTION,
+
/*--- Special stuff -------------------------------------------------*/
/** Scan options supported by the driver. */