/*
- * This file is part of the sigrok project.
+ * This file is part of the libsigrok project.
*
- * Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
+ * Copyright (C) 2012-2013 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "libsigrok-internal.h"
#include "protocol.h"
+extern struct dmm_info udmms[];
+
/*
* Driver for various UNI-T multimeters (and rebranded ones).
*
* Most UNI-T DMMs can be used with two (three) different PC interface cables:
* - The UT-D04 USB/HID cable, old version with Hoitek HE2325U chip.
* - The UT-D04 USB/HID cable, new version with WCH CH9325 chip.
- * - The UT-D01 RS232 cable.
+ * - The UT-D02 RS232 cable.
*
- * This driver is meant to support all three cables, and various DMMs that
+ * This driver is meant to support all USB/HID cables, and various DMMs that
* can be attached to a PC via these cables. Currently only the UT-D04 cable
- * (new version) is supported.
+ * (new version) is supported/tested.
+ * The UT-D02 RS232 cable is handled by the 'serial-dmm' driver.
*
* The data for one DMM packet (e.g. 14 bytes if the respective DMM uses a
* Fortune Semiconductor FS9922-DMM4 chip) is spread across multiple
* f0 00 00 00 00 00 00 00 (no data bytes)
* f2 55 77 00 00 00 00 00 (2 data bytes, 0x55 and 0x77)
* f1 d1 00 00 00 00 00 00 (1 data byte, 0xd1)
- *
- * Chips and serial settings used in UNI-T DMMs (and rebranded ones):
- * - UNI-T UT108: ?
- * - UNI-T UT109: ?
- * - UNI-T UT30A: ?
- * - UNI-T UT30E: ?
- * - UNI-T UT60E: Fortune Semiconductor FS9721_LP3
- * - UNI-T UT60G: ?
- * - UNI-T UT61B: ?
- * - UNI-T UT61C: ?
- * - UNI-T UT61D: Fortune Semiconductor FS9922-DMM4
- * - UNI-T UT61E: Cyrustek ES51922
- * - UNI-T UT70B: ?
- * - Voltcraft VC-820: Fortune Semiconductor FS9721_LP3
- * - Voltcraft VC-840: Fortune Semiconductor FS9721_LP3
- * - ...
*/
-static void decode_packet(struct dev_context *devc, int dmm, const uint8_t *buf)
+static void decode_packet(struct sr_dev_inst *sdi, int dmm, const uint8_t *buf,
+ void *info)
{
+ struct dev_context *devc;
struct sr_datafeed_packet packet;
struct sr_datafeed_analog analog;
float floatval;
int ret;
+ devc = sdi->priv;
memset(&analog, 0, sizeof(struct sr_datafeed_analog));
/* Parse the protocol packet. */
- if (dmm == UNI_T_UT61D)
- ret = sr_dmm_parse_fs9922(buf, &floatval, &analog);
- else if (dmm == VOLTCRAFT_VC820)
- ret = sr_dmm_parse_fs9721(buf, &floatval, &analog);
+ ret = udmms[dmm].packet_parse(buf, &floatval, &analog, info);
if (ret != SR_OK) {
- sr_err("Invalid DMM packet, ignoring.");
+ sr_dbg("Invalid DMM packet, ignoring.");
return;
}
+ /* If this DMM needs additional handling, call the resp. function. */
+ if (udmms[dmm].dmm_details)
+ udmms[dmm].dmm_details(&analog, info);
+
/* Send a sample packet with one analog value. */
+ analog.channels = sdi->channels;
analog.num_samples = 1;
analog.data = &floatval;
packet.type = SR_DF_ANALOG;
devc->num_samples++;
}
-static int hid_chip_init(struct dev_context *devc, uint16_t baudrate)
+static int hid_chip_init(struct sr_dev_inst *sdi, uint16_t baudrate)
{
int ret;
uint8_t buf[5];
+ struct sr_usb_dev_inst *usb;
+ usb = sdi->conn;
+
/* Detach kernel drivers which grabbed this device (if any). */
- if (libusb_kernel_driver_active(devc->usb->devhdl, 0) == 1) {
- ret = libusb_detach_kernel_driver(devc->usb->devhdl, 0);
+ if (libusb_kernel_driver_active(usb->devhdl, 0) == 1) {
+ ret = libusb_detach_kernel_driver(usb->devhdl, 0);
if (ret < 0) {
- sr_err("Failed to detach kernel driver: %d.", ret);
+ sr_err("Failed to detach kernel driver: %s.",
+ libusb_error_name(ret));
return SR_ERR;
}
sr_dbg("Successfully detached kernel driver.");
}
/* Claim interface 0. */
- if ((ret = libusb_claim_interface(devc->usb->devhdl, 0)) < 0) {
- sr_err("Failed to claim interface 0: %d.", ret);
+ if ((ret = libusb_claim_interface(usb->devhdl, 0)) < 0) {
+ sr_err("Failed to claim interface 0: %s.",
+ libusb_error_name(ret));
return SR_ERR;
}
sr_dbg("Successfully claimed interface 0.");
- /* Baudrate example: 19230 baud -> HEX(19230) == 0x4b1e */
+ /* Set data for the HID feature report (e.g. baudrate). */
buf[0] = baudrate & 0xff; /* Baudrate, LSB */
buf[1] = (baudrate >> 8) & 0xff; /* Baudrate, MSB */
buf[2] = 0x00; /* Unknown/unused (?) */
sr_spew("HID init = 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x (%d baud)",
buf[0], buf[1], buf[2], buf[3], buf[4], baudrate);
ret = libusb_control_transfer(
- devc->usb->devhdl, /* libusb device handle */
+ usb->devhdl, /* libusb device handle */
LIBUSB_REQUEST_TYPE_CLASS |
LIBUSB_RECIPIENT_INTERFACE |
LIBUSB_ENDPOINT_OUT,
1000 /* timeout (ms) */);
if (ret < 0) {
- sr_err("HID feature report error: %d.", ret);
+ sr_err("HID feature report error: %s.", libusb_error_name(ret));
return SR_ERR;
}
buf[7], buf[8], buf[9], buf[10], buf[11], buf[12], buf[13]);
}
-static int uni_t_dmm_receive_data(int fd, int revents, int dmm, void *cb_data)
+static int get_and_handle_data(struct sr_dev_inst *sdi, int dmm, void *info)
{
- struct sr_dev_inst *sdi;
struct dev_context *devc;
+ uint8_t buf[CHUNK_SIZE], *pbuf;
int i, ret, len, num_databytes_in_chunk;
- uint8_t buf[CHUNK_SIZE];
- uint8_t *pbuf;
- static gboolean first_run = TRUE, synced_on_first_packet = FALSE;
- static uint64_t data_byte_counter = 0;
+ struct sr_usb_dev_inst *usb;
- (void)fd;
- (void)revents;
-
- sdi = cb_data;
devc = sdi->priv;
-
+ usb = sdi->conn;
pbuf = devc->protocol_buf;
/* On the first run, we need to init the HID chip. */
- if (first_run) {
- /* TODO: The baudrate is DMM-specific (UT61D: 19230). */
- if ((ret = hid_chip_init(devc, 19230)) != SR_OK) {
+ if (devc->first_run) {
+ if ((ret = hid_chip_init(sdi, udmms[dmm].baudrate)) != SR_OK) {
sr_err("HID chip init failed: %d.", ret);
- return FALSE;
+ return SR_ERR;
}
- memset(pbuf, 0x00, NUM_DATA_BYTES);
- first_run = FALSE;
+ memset(pbuf, 0x00, DMM_BUFSIZE);
+ devc->first_run = FALSE;
}
memset(&buf, 0x00, CHUNK_SIZE);
/* Get data from EP2 using an interrupt transfer. */
ret = libusb_interrupt_transfer(
- devc->usb->devhdl, /* libusb device handle */
+ usb->devhdl, /* libusb device handle */
LIBUSB_ENDPOINT_IN | 2, /* EP2, IN */
(unsigned char *)&buf, /* receive buffer */
CHUNK_SIZE, /* wLength */
1000 /* timeout (ms) */);
if (ret < 0) {
- sr_err("USB receive error: %d.", ret);
- return FALSE;
+ sr_err("USB receive error: %s.", libusb_error_name(ret));
+ return SR_ERR;
}
if (len != CHUNK_SIZE) {
sr_err("Short packet: received %d/%d bytes.", len, CHUNK_SIZE);
/* TODO: Print the bytes? */
- return FALSE;
+ return SR_ERR;
}
log_8byte_chunk((const uint8_t *)&buf);
- if (buf[0] != 0xf0) {
- /* First time: Synchronize to the start of a packet. */
- if (!synced_on_first_packet) {
- if (dmm == UNI_T_UT61D) {
- /* Valid packets start with '+' or '-'. */
- if ((buf[1] != '+') && buf[1] != '-')
- return TRUE;
- } else if (dmm == VOLTCRAFT_VC820) {
- /* Valid packets have 0x1 as high nibble. */
- if ((buf[1] & 0xf0) != 0x10)
- return TRUE;
- }
- synced_on_first_packet = TRUE;
- sr_spew("Successfully synchronized on first packet.");
- }
-
- num_databytes_in_chunk = buf[0] & 0x0f;
- for (i = 0; i < num_databytes_in_chunk; i++)
- pbuf[data_byte_counter++] = buf[1 + i];
+ /* If there are no data bytes just return (without error). */
+ if (buf[0] == 0xf0)
+ return SR_OK;
+
+ devc->bufoffset = 0;
+
+ /*
+ * Append the 1-7 data bytes of this chunk to pbuf.
+ *
+ * Special case:
+ * DMMs with Cyrustek ES51922 chip need serial settings of
+ * 19230/7o1. The WCH CH9325 UART to USB/HID chip used in (some
+ * versions of) the UNI-T UT-D04 cable however, will also send
+ * the parity bit to the host in the 8-byte data chunks. This bit
+ * is encoded in bit 7 of each of the 1-7 data bytes and must thus
+ * be removed in order for the actual ES51922 protocol parser to
+ * work properly.
+ */
+ num_databytes_in_chunk = buf[0] & 0x0f;
+ for (i = 0; i < num_databytes_in_chunk; i++, devc->buflen++) {
+ pbuf[devc->buflen] = buf[1 + i];
+ if (udmms[dmm].packet_parse == sr_es519xx_19200_14b_parse)
+ pbuf[devc->buflen] &= ~(1 << 7);
+ }
- /* TODO: Handle > 14 bytes in pbuf? Can this happen? */
- if (data_byte_counter == NUM_DATA_BYTES) {
- log_dmm_packet(pbuf);
- data_byte_counter = 0;
- decode_packet(devc, dmm, pbuf);
- memset(pbuf, 0x00, NUM_DATA_BYTES);
+ /* Now look for packets in that data. */
+ while ((devc->buflen - devc->bufoffset) >= udmms[dmm].packet_size) {
+ if (udmms[dmm].packet_valid(pbuf + devc->bufoffset)) {
+ log_dmm_packet(pbuf + devc->bufoffset);
+ decode_packet(sdi, dmm, pbuf + devc->bufoffset, info);
+ devc->bufoffset += udmms[dmm].packet_size;
+ } else {
+ devc->bufoffset++;
}
}
+ /* Move remaining bytes to beginning of buffer. */
+ for (i = 0; i < devc->buflen - devc->bufoffset; i++)
+ pbuf[i] = pbuf[devc->bufoffset + i];
+ devc->buflen -= devc->bufoffset;
+
+ return SR_OK;
+}
+
+static int receive_data(int fd, int revents, int dmm, void *info, void *cb_data)
+{
+ int ret;
+ struct sr_dev_inst *sdi;
+ struct dev_context *devc;
+ int64_t time_ms;
+
+ (void)fd;
+ (void)revents;
+
+ sdi = cb_data;
+ devc = sdi->priv;
+
+ if ((ret = get_and_handle_data(sdi, dmm, info)) != SR_OK)
+ return FALSE;
+
/* Abort acquisition if we acquired enough samples. */
- if (devc->num_samples >= devc->limit_samples && devc->limit_samples > 0) {
+ if (devc->limit_samples && devc->num_samples >= devc->limit_samples) {
sr_info("Requested number of samples reached.");
sdi->driver->dev_acquisition_stop(sdi, cb_data);
}
- return TRUE;
-}
+ if (devc->limit_msec) {
+ time_ms = (g_get_monotonic_time() - devc->starttime) / 1000;
+ if (time_ms > (int64_t)devc->limit_msec) {
+ sr_info("Requested time limit reached.");
+ sdi->driver->dev_acquisition_stop(sdi, cb_data);
+ return TRUE;
+ }
+ }
-SR_PRIV int uni_t_ut61d_receive_data(int fd, int revents, void *cb_data)
-{
- return uni_t_dmm_receive_data(fd, revents, UNI_T_UT61D, cb_data);
+ return TRUE;
}
-SR_PRIV int voltcraft_vc820_receive_data(int fd, int revents, void *cb_data)
-{
- return uni_t_dmm_receive_data(fd, revents, VOLTCRAFT_VC820, cb_data);
-}
+#define RECEIVE_DATA(ID_UPPER, DMM_DRIVER) \
+SR_PRIV int receive_data_##ID_UPPER(int fd, int revents, void *cb_data) { \
+ struct DMM_DRIVER##_info info; \
+ return receive_data(fd, revents, ID_UPPER, &info, cb_data); }
+
+/* Driver-specific receive_data() wrappers */
+RECEIVE_DATA(TECPEL_DMM_8061, fs9721)
+RECEIVE_DATA(UNI_T_UT60A, fs9721)
+RECEIVE_DATA(UNI_T_UT60E, fs9721)
+RECEIVE_DATA(UNI_T_UT60G, es519xx)
+RECEIVE_DATA(UNI_T_UT61B, fs9922)
+RECEIVE_DATA(UNI_T_UT61C, fs9922)
+RECEIVE_DATA(UNI_T_UT61D, fs9922)
+RECEIVE_DATA(UNI_T_UT61E, es519xx)
+RECEIVE_DATA(VOLTCRAFT_VC820, fs9721)
+RECEIVE_DATA(VOLTCRAFT_VC830, fs9922)
+RECEIVE_DATA(VOLTCRAFT_VC840, fs9721)
+RECEIVE_DATA(TENMA_72_7745, es519xx)
+RECEIVE_DATA(TENMA_72_7750, es519xx)