SR_PRIV struct sr_dev_driver tecpel_dmm_8061_driver_info;
SR_PRIV struct sr_dev_driver uni_t_ut60a_driver_info;
SR_PRIV struct sr_dev_driver uni_t_ut60e_driver_info;
+SR_PRIV struct sr_dev_driver uni_t_ut60g_driver_info;
SR_PRIV struct sr_dev_driver uni_t_ut61b_driver_info;
SR_PRIV struct sr_dev_driver uni_t_ut61c_driver_info;
SR_PRIV struct sr_dev_driver uni_t_ut61d_driver_info;
SR_PRIV struct sr_dev_driver voltcraft_vc830_driver_info;
SR_PRIV struct sr_dev_driver voltcraft_vc840_driver_info;
SR_PRIV struct sr_dev_driver tenma_72_7745_driver_info;
+SR_PRIV struct sr_dev_driver tenma_72_7750_driver_info;
SR_PRIV struct dmm_info udmms[] = {
{
&uni_t_ut60e_driver_info, receive_data_UNI_T_UT60E,
},
{
- "UNI-T", "UT61C", 2400,
- FS9922_PACKET_SIZE,
- sr_fs9922_packet_valid, sr_fs9922_parse,
+ /* The baudrate is actually 19230, see "Note 1" below. */
+ "UNI-T", "UT60G", 19200,
+ ES519XX_11B_PACKET_SIZE,
+ sr_es519xx_19200_11b_packet_valid, sr_es519xx_19200_11b_parse,
NULL,
- &uni_t_ut61c_driver_info, receive_data_UNI_T_UT61C,
+ &uni_t_ut60g_driver_info, receive_data_UNI_T_UT60G,
},
{
"UNI-T", "UT61B", 2400,
NULL,
&uni_t_ut61b_driver_info, receive_data_UNI_T_UT61B,
},
+ {
+ "UNI-T", "UT61C", 2400,
+ FS9922_PACKET_SIZE,
+ sr_fs9922_packet_valid, sr_fs9922_parse,
+ NULL,
+ &uni_t_ut61c_driver_info, receive_data_UNI_T_UT61C,
+ },
{
"UNI-T", "UT61D", 2400,
FS9922_PACKET_SIZE,
&uni_t_ut61d_driver_info, receive_data_UNI_T_UT61D,
},
{
- /*
- * Important: The actual baudrate of the Cyrustek ES51922 chip
- * used in this DMM is 19230. However, the WCH CH9325 chip
- * (UART to USB/HID) used in (some versions of) the UNI-T
- * UT-D04 cable doesn't support 19230 baud. It only supports
- * 19200, and setting an unsupported baudrate will result in
- * the default of 2400 being used (which will not work with
- * this DMM, of course).
- */
+ /* The baudrate is actually 19230, see "Note 1" below. */
"UNI-T", "UT61E", 19200,
ES519XX_14B_PACKET_SIZE,
sr_es519xx_19200_14b_packet_valid, sr_es519xx_19200_14b_parse,
FS9721_PACKET_SIZE,
sr_fs9721_packet_valid, sr_fs9721_parse,
sr_fs9721_00_temp_c,
- &tenma_72_7745_driver_info,
- /* This is a basic rebadge of the UT60E. */
- receive_data_UNI_T_UT60E,
+ &tenma_72_7745_driver_info, receive_data_TENMA_72_7745,
+ },
+ {
+ /* The baudrate is actually 19230, see "Note 1" below. */
+ "Tenma", "72-7750", 19200,
+ ES519XX_11B_PACKET_SIZE,
+ sr_es519xx_19200_11b_packet_valid, sr_es519xx_19200_11b_parse,
+ NULL,
+ &tenma_72_7750_driver_info, receive_data_TENMA_72_7750,
},
};
+/*
+ * Note 1: The actual baudrate of the Cyrustek ES519xx chip used in this DMM
+ * is 19230. However, the WCH CH9325 chip (UART to USB/HID) used in (some
+ * versions of) the UNI-T UT-D04 cable doesn't support 19230 baud. It only
+ * supports 19200, and setting an unsupported baudrate will result in the
+ * default of 2400 being used (which will not work with this DMM, of course).
+ */
+
static int dev_clear(int dmm)
{
return std_dev_clear(udmms[dmm].di, NULL);
DRV(tecpel_dmm_8061, TECPEL_DMM_8061, "tecpel-dmm-8061", "Tecpel DMM-8061")
DRV(uni_t_ut60a, UNI_T_UT60A, "uni-t-ut60a", "UNI-T UT60A")
DRV(uni_t_ut60e, UNI_T_UT60E, "uni-t-ut60e", "UNI-T UT60E")
+DRV(uni_t_ut60g, UNI_T_UT60G, "uni-t-ut60g", "UNI-T UT60G")
DRV(uni_t_ut61b, UNI_T_UT61B, "uni-t-ut61b", "UNI-T UT61B")
DRV(uni_t_ut61c, UNI_T_UT61C, "uni-t-ut61c", "UNI-T UT61C")
DRV(uni_t_ut61d, UNI_T_UT61D, "uni-t-ut61d", "UNI-T UT61D")
DRV(voltcraft_vc830, VOLTCRAFT_VC830, "voltcraft-vc830", "Voltcraft VC-830")
DRV(voltcraft_vc840, VOLTCRAFT_VC840, "voltcraft-vc840", "Voltcraft VC-840")
DRV(tenma_72_7745, TENMA_72_7745, "tenma-72-7745", "Tenma 72-7745")
+DRV(tenma_72_7750, TENMA_72_7750, "tenma-72-7750", "Tenma 72-7750")