#define MAX_EMPTY_TRANSFERS 64
-
static void encrypt(uint8_t *dest, const uint8_t *src, uint8_t cnt)
{
uint8_t state1 = 0x9b, state2 = 0x54;
+ uint8_t t, v;
int i;
- for (i=0; i<cnt; i++) {
- uint8_t t, v = src[i];
+ for (i = 0; i < cnt; i++) {
+ v = src[i];
t = (((v ^ state2 ^ 0x2b) - 0x05) ^ 0x35) - 0x39;
t = (((t ^ state1 ^ 0x5a) - 0xb0) ^ 0x38) - 0x45;
dest[i] = state2 = t;
static void decrypt(uint8_t *dest, const uint8_t *src, uint8_t cnt)
{
uint8_t state1 = 0x9b, state2 = 0x54;
+ uint8_t t, v;
int i;
- for (i=0; i<cnt; i++) {
- uint8_t t, v = src[i];
+
+ for (i = 0; i < cnt; i++) {
+ v = src[i];
t = (((v + 0x45) ^ 0x38) + 0xb0) ^ 0x5a ^ state1;
t = (((t + 0x39) ^ 0x35) + 0x05) ^ 0x2b ^ state2;
dest[i] = state1 = t;
ret = libusb_bulk_transfer(usb->devhdl, 1, buf, cmd_len, &xfer, 1000);
if (ret != 0) {
- sr_dbg("Failed to send EP1 command 0x%02x: %s",
+ sr_dbg("Failed to send EP1 command 0x%02x: %s.",
command[0], libusb_error_name(ret));
return SR_ERR;
}
if (xfer != cmd_len) {
- sr_dbg("Failed to send EP1 command 0x%02x: incorrect length %d != %d",
- xfer, cmd_len);
+ sr_dbg("Failed to send EP1 command 0x%02x: incorrect length "
+ "%d != %d.", xfer, cmd_len);
return SR_ERR;
}
if (reply_len == 0)
return SR_OK;
- ret = libusb_bulk_transfer(usb->devhdl, 0x80 | 1, buf, reply_len, &xfer, 1000);
+ ret = libusb_bulk_transfer(usb->devhdl, 0x80 | 1, buf, reply_len,
+ &xfer, 1000);
if (ret != 0) {
- sr_dbg("Failed to receive reply to EP1 command 0x%02x: %s",
+ sr_dbg("Failed to receive reply to EP1 command 0x%02x: %s.",
command[0], libusb_error_name(ret));
return SR_ERR;
}
if (xfer != reply_len) {
- sr_dbg("Failed to receive reply to EP1 command 0x%02x: incorrect length %d != %d",
- xfer, reply_len);
+ sr_dbg("Failed to receive reply to EP1 command 0x%02x: "
+ "incorrect length %d != %d.", xfer, reply_len);
return SR_ERR;
}
static int upload_led_table(const struct sr_dev_inst *sdi,
const uint8_t *table, uint8_t offset, uint8_t cnt)
{
- uint8_t command[64];
+ uint8_t chunk, command[64];
int ret;
- if (cnt < 1 || cnt+offset > 64 || table == NULL)
+ if (cnt < 1 || cnt + offset > 64 || table == NULL)
return SR_ERR_ARG;
while (cnt > 0) {
- uint8_t chunk = (cnt > 32? 32 : cnt);
+ chunk = (cnt > 32 ? 32 : cnt);
command[0] = COMMAND_WRITE_LED_TABLE;
command[1] = offset;
command[2] = chunk;
- memcpy(command+3, table, chunk);
+ memcpy(command + 3, table, chunk);
- if ((ret = do_ep1_command(sdi, command, 3+chunk, NULL, 0)) != SR_OK)
+ ret = do_ep1_command(sdi, command, 3 + chunk, NULL, 0);
+ if (ret != SR_OK)
return ret;
table += chunk;
uint8_t command[6] = {
COMMAND_SET_LED_MODE,
animate,
- t2reload&0xff,
- t2reload>>8,
+ t2reload & 0xff,
+ t2reload >> 8,
div,
repeat,
};
command[0] = COMMAND_FPGA_WRITE_REGISTER;
command[1] = cnt;
- for (i=0; i<cnt; i++) {
- command[2+2*i] = regs[i][0];
- command[3+2*i] = regs[i][1];
+ for (i = 0; i < cnt; i++) {
+ command[2 + 2 * i] = regs[i][0];
+ command[3 + 2 * i] = regs[i][1];
}
- return do_ep1_command(sdi, command, 2*(cnt+1), NULL, 0);
+ return do_ep1_command(sdi, command, 2 * (cnt + 1), NULL, 0);
}
static int write_fpga_register(const struct sr_dev_inst *sdi,
uint8_t address, uint8_t value)
{
uint8_t regs[2] = { address, value };
+
return write_fpga_registers(sdi, ®s, 1);
}
-
static uint8_t map_eeprom_data(uint8_t v)
{
- /* ??? */
- switch (v) {
- case 0x00: return 0x7a;
- case 0x01: return 0x79;
- case 0x05: return 0x85;
- case 0x10: return 0x6a;
- case 0x11: return 0x69;
- case 0x14: return 0x76;
- case 0x15: return 0x75;
- case 0x41: return 0x39;
- case 0x50: return 0x2a;
- case 0x51: return 0x29;
- case 0x55: return 0x35;
- default:
- sr_err("No mapping of 0x%02x defined", v);
- return 0xff;
- }
+ return (((v ^ 0x80) + 0x44) ^ 0xd5) + 0x69;
}
static int prime_fpga(const struct sr_dev_inst *sdi)
{
uint8_t eeprom_data[16];
- uint8_t old_reg_10, status;
+ uint8_t old_reg_10, version;
uint8_t regs[8][2] = {
{10, 0x00},
{10, 0x40},
{12, 0},
{10, 0xc0},
{10, 0x40},
- { 6, 0},
- { 7, 1},
- { 7, 0}
+ {6, 0},
+ {7, 1},
+ {7, 0}
};
int i, ret;
if ((ret = read_fpga_register(sdi, 10, &old_reg_10)) != SR_OK)
return ret;
- for (i=0; i<16; i++) {
+ regs[0][1] = (old_reg_10 &= 0x7f);
+ regs[1][1] |= old_reg_10;
+ regs[3][1] |= old_reg_10;
+ regs[4][1] |= old_reg_10;
+
+ for (i = 0; i < 16; i++) {
regs[2][1] = eeprom_data[i];
regs[5][1] = map_eeprom_data(eeprom_data[i]);
if (i)
if ((ret = write_fpga_register(sdi, 10, old_reg_10)) != SR_OK)
return ret;
- if ((ret = read_fpga_register(sdi, 0, &status)) != SR_OK)
+ if ((ret = read_fpga_register(sdi, 0, &version)) != SR_OK)
return ret;
- if (status != 0x10) {
- sr_err("Invalid FPGA status: 0x%02x != 0x10", status);
+ if (version != 0x10) {
+ sr_err("Invalid FPGA bitstream version: 0x%02x != 0x10.", version);
return SR_ERR;
}
memset(table, 0, len);
len >>= 3;
- for (i=0; i<2; i++)
- for (j=0; j<len; j++)
- *table++ = sin(j*M_PI/len)*255;
+ for (i = 0; i < 2; i++)
+ for (j = 0; j < len; j++)
+ *table++ = sin(j * M_PI / len) * 255;
}
static int configure_led(const struct sr_dev_inst *sdi)
struct dev_context *devc;
int offset, chunksize, ret;
const char *filename;
+ uint8_t len, buf[256 * 62], command[64];
FILE *fw;
- unsigned char buf[256*62];
devc = sdi->priv;
filename = FPGA_FIRMWARE_33;
break;
default:
- sr_err("Unsupported voltage range");
+ sr_err("Unsupported voltage range.");
return SR_ERR;
}
- sr_info("Uploading FPGA bitstream at %s", filename);
+ sr_info("Uploading FPGA bitstream at %s.", filename);
if ((fw = g_fopen(filename, "rb")) == NULL) {
- sr_err("Unable to open bitstream file %s for reading: %s",
+ sr_err("Unable to open bitstream file %s for reading: %s.",
filename, strerror(errno));
return SR_ERR;
}
break;
for (offset = 0; offset < chunksize; offset += 62) {
- uint8_t command[64];
- uint8_t len = (offset + 62 > chunksize?
- chunksize - offset : 62);
+ len = (offset + 62 > chunksize ?
+ chunksize - offset : 62);
command[0] = COMMAND_FPGA_UPLOAD_SEND_DATA;
command[1] = len;
- memcpy(command+2, buf+offset, len);
- if ((ret = do_ep1_command(sdi, command, len+2, NULL, 0)) != SR_OK) {
+ memcpy(command + 2, buf + offset, len);
+ ret = do_ep1_command(sdi, command, len + 2, NULL, 0);
+ if (ret != SR_OK) {
fclose(fw);
return ret;
}
}
- sr_info("Uploaded %d bytes", chunksize);
+ sr_info("Uploaded %d bytes.", chunksize);
}
fclose(fw);
- sr_info("FPGA bitstream upload done");
+ sr_info("FPGA bitstream upload done.");
if ((ret = prime_fpga(sdi)) != SR_OK)
return ret;
expected_reply = ~command[1];
if (reply != expected_reply) {
sr_err("Invalid response for abort acquisition command: "
- "0x%02x != 0x%02x", reply, expected_reply);
+ "0x%02x != 0x%02x.", reply, expected_reply);
return SR_ERR;
}
return SR_OK;
}
-SR_PRIV int saleae_logic16_setup_acquisition(const struct sr_dev_inst *sdi,
- uint64_t samplerate,
- uint16_t channels)
+SR_PRIV int logic16_setup_acquisition(const struct sr_dev_inst *sdi,
+ uint64_t samplerate, uint16_t channels)
{
uint8_t clock_select, reg1, reg10;
uint64_t div;
return SR_ERR;
}
- for (i=0; i<16; i++)
- if (channels & (1U<<i))
+ for (i = 0; i < 16; i++)
+ if (channels & (1U << i))
nchan++;
if ((nchan >= 13 && samplerate > MAX_13CH_SAMPLE_RATE) ||
return SR_ERR;
}
- if ((ret = upload_fpga_bitstream(sdi, devc->selected_voltage_range)) != SR_OK)
+ ret = upload_fpga_bitstream(sdi, devc->selected_voltage_range);
+ if (ret != SR_OK)
return ret;
if ((ret = read_fpga_register(sdi, 1, ®1)) != SR_OK)
return ret;
if (reg1 != 0x08) {
- sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x08", reg1);
+ sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x08.", reg1);
return SR_ERR;
}
if ((ret = write_fpga_register(sdi, 10, clock_select)) != SR_OK)
return ret;
- if ((ret = write_fpga_register(sdi, 4, (uint8_t)(div-1))) != SR_OK)
+ if ((ret = write_fpga_register(sdi, 4, (uint8_t)(div - 1))) != SR_OK)
return ret;
if ((ret = write_fpga_register(sdi, 2, (uint8_t)(channels & 0xff))) != SR_OK)
return ret;
if (reg1 != 0x48) {
- sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x48", reg1);
+ sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x48.", reg1);
return SR_ERR;
}
return ret;
if (reg10 != clock_select) {
- sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x%02x",
- reg10, (unsigned)clock_select);
+ sr_dbg("Invalid state at acquisition setup: 0x%02x != 0x%02x.",
+ reg10, clock_select);
return SR_ERR;
}
return SR_OK;
}
-SR_PRIV int saleae_logic16_start_acquisition(const struct sr_dev_inst *sdi)
+SR_PRIV int logic16_start_acquisition(const struct sr_dev_inst *sdi)
{
static const uint8_t command[1] = {
COMMAND_START_ACQUISITION,
return write_fpga_register(sdi, 1, 0x41);
}
-SR_PRIV int saleae_logic16_abort_acquisition(const struct sr_dev_inst *sdi)
+SR_PRIV int logic16_abort_acquisition(const struct sr_dev_inst *sdi)
{
static const uint8_t command[1] = {
COMMAND_ABORT_ACQUISITION_ASYNC,
return ret;
if (reg1 != 0x08) {
- sr_dbg("Invalid state at acquisition stop: 0x%02x != 0x08", reg1);
+ sr_dbg("Invalid state at acquisition stop: 0x%02x != 0x08.", reg1);
return SR_ERR;
}
return SR_OK;
}
-SR_PRIV int saleae_logic16_init_device(const struct sr_dev_inst *sdi)
+SR_PRIV int logic16_init_device(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
int ret;
if ((ret = read_eeprom(sdi, 8, 8, devc->eeprom_data)) != SR_OK)
return ret;
- if ((ret = upload_fpga_bitstream(sdi, devc->selected_voltage_range)) != SR_OK)
+ ret = upload_fpga_bitstream(sdi, devc->selected_voltage_range);
+ if (ret != SR_OK)
return ret;
return SR_OK;
uint16_t *channel_data;
int i, cur_channel;
size_t ret = 0;
+ uint16_t sample, channel_mask;
srccnt /= 2;
channel_data = devc->channel_data;
cur_channel = devc->cur_channel;
- while(srccnt--) {
- uint16_t sample, channel_mask;
-
+ while (srccnt--) {
sample = src[0] | (src[1] << 8);
src += 2;
channel_mask = devc->channel_masks[cur_channel];
- for (i=15; i>=0; --i, sample >>= 1)
+ for (i = 15; i >= 0; --i, sample >>= 1)
if (sample & 1)
channel_data[i] |= channel_mask;
if (++cur_channel == devc->num_channels) {
cur_channel = 0;
- if (destcnt < 16*2) {
+ if (destcnt < 16 * 2) {
sr_err("Conversion buffer too small!");
break;
}
- memcpy(dest, channel_data, 16*2);
- memset(channel_data, 0, 16*2);
- dest += 16*2;
- ret += 16*2;
- destcnt -= 16*2;
+ memcpy(dest, channel_data, 16 * 2);
+ memset(channel_data, 0, 16 * 2);
+ dest += 16 * 2;
+ ret += 16 * 2;
+ destcnt -= 16 * 2;
}
}
return ret;
}
-SR_PRIV void saleae_logic16_receive_transfer(struct libusb_transfer *transfer)
+SR_PRIV void logic16_receive_transfer(struct libusb_transfer *transfer)
{
gboolean packet_has_error = FALSE;
struct sr_datafeed_packet packet;
}
if (transfer->actual_length & 1) {
- sr_err("Got an odd number of bytes from the device. This should not happen.");
- /* Bail out right away */
+ sr_err("Got an odd number of bytes from the device. "
+ "This should not happen.");
+ /* Bail out right away. */
packet_has_error = TRUE;
devc->empty_transfer_count = MAX_EMPTY_TRANSFERS;
}
devc->empty_transfer_count = 0;
}
- converted_length =
- convert_sample_data(devc,
- devc->convbuffer, devc->convbuffer_size,
- transfer->buffer, transfer->actual_length);
+ converted_length = convert_sample_data(devc, devc->convbuffer,
+ devc->convbuffer_size, transfer->buffer,
+ transfer->actual_length);
if (converted_length > 0) {
/* Send the incoming transfer to the session bus. */