* This file is part of the libsigrok project.
*
* Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se>
+ * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
+ * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <libusb.h>
#include <stdlib.h>
#include <string.h>
+#include <math.h>
#include "libsigrok.h"
#include "libsigrok-internal.h"
#include "protocol.h"
-#define LOGIC16_VID 0x21a9
-#define LOGIC16_PID 0x1001
-#define NUM_PROBES 16
+#define LOGIC16_VID 0x21a9
+#define LOGIC16_PID 0x1001
#define USB_INTERFACE 0
#define USB_CONFIGURATION 1
#define FX2_FIRMWARE FIRMWARE_DIR "/saleae-logic16-fx2.fw"
#define MAX_RENUM_DELAY_MS 3000
-
+#define NUM_SIMUL_TRANSFERS 32
SR_PRIV struct sr_dev_driver saleae_logic16_driver_info;
static struct sr_dev_driver *di = &saleae_logic16_driver_info;
-static const char *probe_names[NUM_PROBES + 1] = {
+static const int32_t hwopts[] = {
+ SR_CONF_CONN,
+};
+
+static const int32_t hwcaps[] = {
+ SR_CONF_LOGIC_ANALYZER,
+ SR_CONF_SAMPLERATE,
+ SR_CONF_VOLTAGE_THRESHOLD,
+
+ /* These are really implemented in the driver, not the hardware. */
+ SR_CONF_LIMIT_SAMPLES,
+ SR_CONF_CONTINUOUS,
+};
+
+static const char *probe_names[] = {
"0", "1", "2", "3", "4", "5", "6", "7", "8",
"9", "10", "11", "12", "13", "14", "15",
NULL,
};
+static const struct {
+ enum voltage_range range;
+ gdouble low;
+ gdouble high;
+} volt_thresholds[] = {
+ { VOLTAGE_RANGE_18_33_V, 0.7, 1.4 },
+ { VOLTAGE_RANGE_5_V, 1.4, 3.6 },
+};
+
+static const uint64_t samplerates[] = {
+ SR_KHZ(500),
+ SR_MHZ(1),
+ SR_MHZ(2),
+ SR_MHZ(4),
+ SR_MHZ(5),
+ SR_MHZ(8),
+ SR_MHZ(10),
+ SR_KHZ(12500),
+ SR_MHZ(16),
+ SR_MHZ(25),
+ SR_MHZ(32),
+ SR_MHZ(40),
+ SR_MHZ(80),
+ SR_MHZ(100),
+};
+
static int init(struct sr_context *sr_ctx)
{
return std_init(sr_ctx, di, LOG_PREFIX);
break;
if (libusb_get_string_descriptor_ascii(hdl,
- des.iProduct, strdesc, sizeof(strdesc)) < 0)
+ des.iProduct, strdesc, sizeof(strdesc)) < 0)
break;
if (strcmp((const char *)strdesc, "Logic S/16"))
break;
continue;
}
- if ((ret = libusb_get_device_descriptor( devlist[i], &des)) != 0) {
+ if ((ret = libusb_get_device_descriptor(devlist[i], &des)) != 0) {
sr_warn("Failed to get device descriptor: %s.",
libusb_error_name(ret));
continue;
if (!(devc = g_try_malloc0(sizeof(struct dev_context))))
return NULL;
+ devc->selected_voltage_range = VOLTAGE_RANGE_18_33_V;
sdi->priv = devc;
drvc->instances = g_slist_append(drvc->instances, sdi);
devices = g_slist_append(devices, sdi);
sr_dbg("Found a Logic16 device.");
sdi->status = SR_ST_INACTIVE;
sdi->inst_type = SR_INST_USB;
- sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
- libusb_get_device_address(devlist[i]), NULL);
+ sdi->conn = sr_usb_dev_inst_new(
+ libusb_get_bus_number(devlist[i]),
+ libusb_get_device_address(devlist[i]), NULL);
} else {
if (ezusb_upload_firmware(devlist[i], USB_CONFIGURATION,
FX2_FIRMWARE) == SR_OK)
sr_err("Firmware upload failed for "
"device %d.", devcnt);
sdi->inst_type = SR_INST_USB;
- sdi->conn = sr_usb_dev_inst_new (libusb_get_bus_number(devlist[i]),
- 0xff, NULL);
+ sdi->conn = sr_usb_dev_inst_new(
+ libusb_get_bus_number(devlist[i]), 0xff, NULL);
}
}
libusb_free_device_list(devlist, 1);
static GSList *dev_list(void)
{
- struct drv_context *drvc;
-
- drvc = di->priv;
-
- return drvc->instances;
+ return ((struct drv_context *)(di->priv))->instances;
}
static int dev_clear(void)
libusb_device **devlist;
struct sr_usb_dev_inst *usb;
struct libusb_device_descriptor des;
- struct dev_context *devc;
struct drv_context *drvc;
int ret, skip, i, device_count;
drvc = di->priv;
- devc = sdi->priv;
usb = sdi->conn;
if (sdi->status == SR_ST_ACTIVE)
continue;
}
- if (des.idVendor != LOGIC16_VID
- || des.idProduct != LOGIC16_PID)
+ if (des.idVendor != LOGIC16_VID || des.idProduct != LOGIC16_PID)
continue;
if (sdi->status == SR_ST_INITIALIZING) {
* this device by vendor, product, bus and address.
*/
if (libusb_get_bus_number(devlist[i]) != usb->bus
- || libusb_get_device_address(devlist[i]) != usb->address)
+ || libusb_get_device_address(devlist[i]) != usb->address)
/* This is not the one. */
continue;
}
break;
}
+ ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE);
+ if (ret == LIBUSB_ERROR_BUSY) {
+ sr_err("Unable to claim USB interface. Another "
+ "program or driver has already claimed it.");
+ break;
+ } else if (ret == LIBUSB_ERROR_NO_DEVICE) {
+ sr_err("Device has been disconnected.");
+ break;
+ } else if (ret != 0) {
+ sr_err("Unable to claim interface: %s.",
+ libusb_error_name(ret));
+ break;
+ }
+
+ if ((ret = logic16_init_device(sdi)) != SR_OK) {
+ sr_err("Failed to init device.");
+ break;
+ }
+
sdi->status = SR_ST_ACTIVE;
- sr_info("Opened device %d on %d.%d, "
- "interface %d.",
- sdi->index, usb->bus, usb->address,
- USB_INTERFACE);
+ sr_info("Opened device %d on %d.%d, interface %d.",
+ sdi->index, usb->bus, usb->address, USB_INTERFACE);
break;
}
libusb_free_device_list(devlist, 1);
- if (sdi->status != SR_ST_ACTIVE)
+ if (sdi->status != SR_ST_ACTIVE) {
+ if (usb->devhdl) {
+ libusb_release_interface(usb->devhdl, USB_INTERFACE);
+ libusb_close(usb->devhdl);
+ usb->devhdl = NULL;
+ }
return SR_ERR;
+ }
return SR_OK;
}
static int dev_open(struct sr_dev_inst *sdi)
{
- struct sr_usb_dev_inst *usb;
struct dev_context *devc;
int ret;
int64_t timediff_us, timediff_ms;
devc = sdi->priv;
- usb = sdi->conn;
/*
* If the firmware was recently uploaded, wait up to MAX_RENUM_DELAY_MS
return SR_ERR;
}
- ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE);
- if (ret != 0) {
- switch(ret) {
- case LIBUSB_ERROR_BUSY:
- sr_err("Unable to claim USB interface. Another "
- "program or driver has already claimed it.");
- break;
- case LIBUSB_ERROR_NO_DEVICE:
- sr_err("Device has been disconnected.");
- break;
- default:
- sr_err("Unable to claim interface: %s.",
- libusb_error_name(ret));
- break;
- }
-
- return SR_ERR;
- }
-
if (devc->cur_samplerate == 0) {
/* Samplerate hasn't been set; default to the slowest one. */
- devc->cur_samplerate = 500000;
+ devc->cur_samplerate = samplerates[0];
}
return SR_OK;
return ret;
}
-static int config_get(int key, GVariant **data, const struct sr_dev_inst *sdi)
+static int config_get(int key, GVariant **data, const struct sr_dev_inst *sdi,
+ const struct sr_probe_group *probe_group)
{
+ struct dev_context *devc;
+ struct sr_usb_dev_inst *usb;
+ GVariant *range[2];
+ char str[128];
int ret;
+ unsigned int i;
- (void)sdi;
- (void)data;
+ (void)probe_group;
ret = SR_OK;
switch (key) {
- /* TODO */
+ case SR_CONF_CONN:
+ if (!sdi || !sdi->conn)
+ return SR_ERR_ARG;
+ usb = sdi->conn;
+ if (usb->address == 255)
+ /* Device still needs to re-enumerate after firmware
+ * upload, so we don't know its (future) address. */
+ return SR_ERR;
+ snprintf(str, 128, "%d.%d", usb->bus, usb->address);
+ *data = g_variant_new_string(str);
+ break;
+ case SR_CONF_SAMPLERATE:
+ if (!sdi)
+ return SR_ERR;
+ devc = sdi->priv;
+ *data = g_variant_new_uint64(devc->cur_samplerate);
+ break;
+ case SR_CONF_VOLTAGE_THRESHOLD:
+ if (!sdi)
+ return SR_ERR;
+ devc = sdi->priv;
+ ret = SR_ERR;
+ for (i = 0; i < ARRAY_SIZE(volt_thresholds); i++) {
+ if (devc->selected_voltage_range !=
+ volt_thresholds[i].range)
+ continue;
+ range[0] = g_variant_new_double(volt_thresholds[i].low);
+ range[1] = g_variant_new_double(volt_thresholds[i].high);
+ *data = g_variant_new_tuple(range, 2);
+ ret = SR_OK;
+ break;
+ }
+ break;
default:
return SR_ERR_NA;
}
return ret;
}
-static int config_set(int key, GVariant *data, const struct sr_dev_inst *sdi)
+static int config_set(int key, GVariant *data, const struct sr_dev_inst *sdi,
+ const struct sr_probe_group *probe_group)
{
+ struct dev_context *devc;
+ gdouble low, high;
int ret;
+ unsigned int i;
- (void)data;
+ (void)probe_group;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
+ devc = sdi->priv;
+
ret = SR_OK;
switch (key) {
- /* TODO */
+ case SR_CONF_SAMPLERATE:
+ devc->cur_samplerate = g_variant_get_uint64(data);
+ break;
+ case SR_CONF_LIMIT_SAMPLES:
+ devc->limit_samples = g_variant_get_uint64(data);
+ break;
+ case SR_CONF_VOLTAGE_THRESHOLD:
+ g_variant_get(data, "(dd)", &low, &high);
+ ret = SR_ERR_ARG;
+ for (i = 0; i < ARRAY_SIZE(volt_thresholds); i++) {
+ if (fabs(volt_thresholds[i].low - low) < 0.1 &&
+ fabs(volt_thresholds[i].high - high) < 0.1) {
+ devc->selected_voltage_range =
+ volt_thresholds[i].range;
+ ret = SR_OK;
+ break;
+ }
+ }
+ break;
default:
ret = SR_ERR_NA;
}
return ret;
}
-static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi)
+static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
+ const struct sr_probe_group *probe_group)
{
+ GVariant *gvar, *range[2];
+ GVariantBuilder gvb;
int ret;
+ unsigned int i;
(void)sdi;
- (void)data;
+ (void)probe_group;
ret = SR_OK;
switch (key) {
- /* TODO */
+ case SR_CONF_SCAN_OPTIONS:
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+ hwopts, ARRAY_SIZE(hwopts), sizeof(int32_t));
+ break;
+ case SR_CONF_DEVICE_OPTIONS:
+ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+ hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t));
+ break;
+ case SR_CONF_SAMPLERATE:
+ g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
+ gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"),
+ samplerates, ARRAY_SIZE(samplerates), sizeof(uint64_t));
+ g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
+ *data = g_variant_builder_end(&gvb);
+ break;
+ case SR_CONF_VOLTAGE_THRESHOLD:
+ g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
+ for (i = 0; i < ARRAY_SIZE(volt_thresholds); i++) {
+ range[0] = g_variant_new_double(volt_thresholds[i].low);
+ range[1] = g_variant_new_double(volt_thresholds[i].high);
+ gvar = g_variant_new_tuple(range, 2);
+ g_variant_builder_add_value(&gvb, gvar);
+ }
+ *data = g_variant_builder_end(&gvb);
+ break;
default:
return SR_ERR_NA;
}
return ret;
}
-static int dev_acquisition_start(const struct sr_dev_inst *sdi,
- void *cb_data)
+static void abort_acquisition(struct dev_context *devc)
{
- (void)sdi;
- (void)cb_data;
+ int i;
+
+ devc->num_samples = -1;
+
+ for (i = devc->num_transfers - 1; i >= 0; i--) {
+ if (devc->transfers[i])
+ libusb_cancel_transfer(devc->transfers[i]);
+ }
+}
+
+static unsigned int bytes_per_ms(struct dev_context *devc)
+{
+ return devc->cur_samplerate * devc->num_channels / 8000;
+}
+
+static size_t get_buffer_size(struct dev_context *devc)
+{
+ size_t s;
+
+ /*
+ * The buffer should be large enough to hold 10ms of data and
+ * a multiple of 512.
+ */
+ s = 10 * bytes_per_ms(devc);
+ return (s + 511) & ~511;
+}
+
+static unsigned int get_number_of_transfers(struct dev_context *devc)
+{
+ unsigned int n;
+
+ /* Total buffer size should be able to hold about 500ms of data. */
+ n = 500 * bytes_per_ms(devc) / get_buffer_size(devc);
+
+ if (n > NUM_SIMUL_TRANSFERS)
+ return NUM_SIMUL_TRANSFERS;
+
+ return n;
+}
+
+static unsigned int get_timeout(struct dev_context *devc)
+{
+ size_t total_size;
+ unsigned int timeout;
+
+ total_size = get_buffer_size(devc) * get_number_of_transfers(devc);
+ timeout = total_size / bytes_per_ms(devc);
+ return timeout + timeout / 4; /* Leave a headroom of 25% percent. */
+}
+
+static int configure_probes(const struct sr_dev_inst *sdi)
+{
+ struct dev_context *devc;
+ struct sr_probe *probe;
+ GSList *l;
+ uint16_t probe_bit;
+
+ devc = sdi->priv;
+
+ devc->cur_channels = 0;
+ devc->num_channels = 0;
+ for (l = sdi->probes; l; l = l->next) {
+ probe = (struct sr_probe *)l->data;
+ if (probe->enabled == FALSE)
+ continue;
+
+ probe_bit = 1 << (probe->index);
+
+ devc->cur_channels |= probe_bit;
+
+#ifdef WORDS_BIGENDIAN
+ /*
+ * Output logic data should be stored in little endian format.
+ * To speed things up during conversion, do the switcharoo
+ * here instead.
+ */
+ probe_bit = 1 << (probe->index ^ 8);
+#endif
+
+ devc->channel_masks[devc->num_channels++] = probe_bit;
+ }
+
+ return SR_OK;
+}
+
+static int receive_data(int fd, int revents, void *cb_data)
+{
+ struct timeval tv;
+ struct dev_context *devc;
+ struct drv_context *drvc;
+ const struct sr_dev_inst *sdi;
+
+ (void)fd;
+ (void)revents;
+
+ sdi = cb_data;
+ drvc = di->priv;
+ devc = sdi->priv;
+
+ tv.tv_sec = tv.tv_usec = 0;
+ libusb_handle_events_timeout(drvc->sr_ctx->libusb_ctx, &tv);
+
+ if (devc->num_samples == -2) {
+ logic16_abort_acquisition(sdi);
+ abort_acquisition(devc);
+ }
+
+ return TRUE;
+}
+
+static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
+{
+ struct dev_context *devc;
+ struct drv_context *drvc;
+ struct sr_usb_dev_inst *usb;
+ struct libusb_transfer *transfer;
+ const struct libusb_pollfd **lupfd;
+ unsigned int i, timeout, num_transfers;
+ int ret;
+ unsigned char *buf;
+ size_t size, convsize;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
- /* TODO: configure hardware, reset acquisition state, set up
- * callbacks and send header packet. */
+ drvc = di->priv;
+ devc = sdi->priv;
+ usb = sdi->conn;
+
+ /* Configures devc->cur_channels. */
+ if (configure_probes(sdi) != SR_OK) {
+ sr_err("Failed to configure probes.");
+ return SR_ERR;
+ }
+
+ devc->cb_data = cb_data;
+ devc->num_samples = 0;
+ devc->empty_transfer_count = 0;
+ devc->cur_channel = 0;
+ memset(devc->channel_data, 0, sizeof(devc->channel_data));
+
+ timeout = get_timeout(devc);
+ num_transfers = get_number_of_transfers(devc);
+ size = get_buffer_size(devc);
+ convsize = (size / devc->num_channels + 2) * 16;
+ devc->submitted_transfers = 0;
+ devc->usbfd = NULL;
+
+ devc->convbuffer_size = convsize;
+ if (!(devc->convbuffer = g_try_malloc(convsize))) {
+ sr_err("Conversion buffer malloc failed.");
+ return SR_ERR_MALLOC;
+ }
+
+ devc->transfers = g_try_malloc0(sizeof(*devc->transfers) * num_transfers);
+ if (!devc->transfers) {
+ sr_err("USB transfers malloc failed.");
+ g_free(devc->convbuffer);
+ return SR_ERR_MALLOC;
+ }
+
+ if ((ret = logic16_setup_acquisition(sdi, devc->cur_samplerate,
+ devc->cur_channels)) != SR_OK) {
+ g_free(devc->transfers);
+ g_free(devc->convbuffer);
+ return ret;
+ }
+
+ devc->num_transfers = num_transfers;
+ for (i = 0; i < num_transfers; i++) {
+ if (!(buf = g_try_malloc(size))) {
+ sr_err("USB transfer buffer malloc failed.");
+ if (devc->submitted_transfers)
+ abort_acquisition(devc);
+ else {
+ g_free(devc->transfers);
+ g_free(devc->convbuffer);
+ }
+ return SR_ERR_MALLOC;
+ }
+ transfer = libusb_alloc_transfer(0);
+ libusb_fill_bulk_transfer(transfer, usb->devhdl,
+ 2 | LIBUSB_ENDPOINT_IN, buf, size,
+ logic16_receive_transfer, devc, timeout);
+ if ((ret = libusb_submit_transfer(transfer)) != 0) {
+ sr_err("Failed to submit transfer: %s.",
+ libusb_error_name(ret));
+ libusb_free_transfer(transfer);
+ g_free(buf);
+ abort_acquisition(devc);
+ return SR_ERR;
+ }
+ devc->transfers[i] = transfer;
+ devc->submitted_transfers++;
+ }
+
+ lupfd = libusb_get_pollfds(drvc->sr_ctx->libusb_ctx);
+ for (i = 0; lupfd[i]; i++);
+ devc->usbfd = g_try_malloc(sizeof(struct libusb_pollfd) * (i + 1));
+ if (!devc->usbfd) {
+ abort_acquisition(devc);
+ free(lupfd);
+ return SR_ERR;
+ }
+ for (i = 0; lupfd[i]; i++) {
+ sr_source_add(lupfd[i]->fd, lupfd[i]->events,
+ timeout, receive_data, (void *)sdi);
+ devc->usbfd[i] = lupfd[i]->fd;
+ }
+ devc->usbfd[i] = -1;
+ free(lupfd);
+
+ /* Send header packet to the session bus. */
+ std_session_send_df_header(cb_data, LOG_PREFIX);
+
+ if ((ret = logic16_start_acquisition(sdi)) != SR_OK) {
+ abort_acquisition(devc);
+ return ret;
+ }
return SR_OK;
}
static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
{
+ int ret;
+
(void)cb_data;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
- /* TODO: stop acquisition. */
+ ret = logic16_abort_acquisition(sdi);
- return SR_OK;
+ abort_acquisition(sdi->priv);
+
+ return ret;
}
SR_PRIV struct sr_dev_driver saleae_logic16_driver_info = {