/*
* This file is part of the sigrok project.
*
- * Copyright (C) 2010 Bert Vermeulen <bert@biot.com>
+ * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
+#ifdef _WIN32
+#include <windows.h>
+#else
#include <termios.h>
+#endif
#include <string.h>
#include <sys/time.h>
#include <inttypes.h>
+#ifdef _WIN32
+/* TODO */
+#else
#include <arpa/inet.h>
+#endif
#include <glib.h>
#include "sigrok.h"
-
-#define NUM_PROBES 32
-#define NUM_TRIGGER_STAGES 4
-#define TRIGGER_TYPES "01"
-#define SERIAL_SPEED B115200
-/* TODO: SERIAL_ bits, parity, stop bit */
-#define CLOCK_RATE 100000000
-
-
-/* command opcodes */
-#define CMD_RESET 0x00
-#define CMD_ID 0x02
-#define CMD_SET_FLAGS 0x82
-#define CMD_SET_DIVIDER 0x80
-#define CMD_RUN 0x01
-#define CMD_CAPTURE_SIZE 0x81
-#define CMD_SET_TRIGGER_MASK_0 0xc0
-#define CMD_SET_TRIGGER_MASK_1 0xc4
-#define CMD_SET_TRIGGER_MASK_2 0xc8
-#define CMD_SET_TRIGGER_MASK_3 0xcc
-#define CMD_SET_TRIGGER_VALUE_0 0xc1
-#define CMD_SET_TRIGGER_VALUE_1 0xc5
-#define CMD_SET_TRIGGER_VALUE_2 0xc9
-#define CMD_SET_TRIGGER_VALUE_3 0xcd
-#define CMD_SET_TRIGGER_CONFIG_0 0xc2
-#define CMD_SET_TRIGGER_CONFIG_1 0xc6
-#define CMD_SET_TRIGGER_CONFIG_2 0xca
-#define CMD_SET_TRIGGER_CONFIG_3 0xce
-
-/* bitmasks for CMD_FLAGS */
-#define FLAG_DEMUX 0x01
-#define FLAG_FILTER 0x02
-#define FLAG_CHANNELGROUP_1 0x04
-#define FLAG_CHANNELGROUP_2 0x08
-#define FLAG_CHANNELGROUP_3 0x10
-#define FLAG_CHANNELGROUP_4 0x20
-#define FLAG_CLOCK_EXTERNAL 0x40
-#define FLAG_CLOCK_INVERTED 0x80
-#define FLAG_RLE 0x0100
-
-
-static int capabilities[] = {
- HWCAP_LOGIC_ANALYZER,
- HWCAP_SAMPLERATE,
- HWCAP_CAPTURE_RATIO,
- HWCAP_LIMIT_SAMPLES,
- 0
+#include "sigrok-internal.h"
+#include "ols.h"
+
+#ifdef _WIN32
+#define O_NONBLOCK FIONBIO
+#endif
+
+static const int hwcaps[] = {
+ SR_HWCAP_LOGIC_ANALYZER,
+ SR_HWCAP_SAMPLERATE,
+ SR_HWCAP_CAPTURE_RATIO,
+ SR_HWCAP_LIMIT_SAMPLES,
+ SR_HWCAP_RLE,
+ 0,
};
-static struct samplerates samplerates = {
- 10,
- MHZ(200),
- 1,
- 0
+/* Probes are numbered 0-31 (on the PCB silkscreen). */
+static const char *probe_names[NUM_PROBES + 1] = {
+ "0",
+ "1",
+ "2",
+ "3",
+ "4",
+ "5",
+ "6",
+ "7",
+ "8",
+ "9",
+ "10",
+ "11",
+ "12",
+ "13",
+ "14",
+ "15",
+ "16",
+ "17",
+ "18",
+ "19",
+ "20",
+ "21",
+ "22",
+ "23",
+ "24",
+ "25",
+ "26",
+ "27",
+ "28",
+ "29",
+ "30",
+ "31",
+ NULL,
};
-/* list of struct serial_device_instance */
-static GSList *device_instances = NULL;
-
-/* current state of the flag register */
-static uint32_t flag_reg = 0;
-
-static uint64_t cur_samplerate = 0;
-static uint64_t limit_samples = 0;
-/* pre/post trigger capture ratio, in percentage. 0 means no pre-trigger data. */
-static int capture_ratio = 0;
-static uint32_t probe_mask = 0xffffffff, trigger_mask[4] = {0}, trigger_value[4] = {0};
-
+/* default supported samplerates, can be overridden by device metadata */
+static const struct sr_samplerates samplerates = {
+ SR_HZ(10),
+ SR_MHZ(200),
+ SR_HZ(1),
+ NULL,
+};
+/* List of struct sr_dev_inst. */
+static GSList *dev_insts = NULL;
static int send_shortcommand(int fd, uint8_t command)
{
char buf[1];
- g_message("ols: sending cmd 0x%.2x", command);
+ sr_dbg("ols: sending cmd 0x%.2x", command);
buf[0] = command;
- if(write(fd, buf, 1) != 1)
- return SIGROK_ERR;
+ if (serial_write(fd, buf, 1) != 1)
+ return SR_ERR;
- return SIGROK_OK;
+ return SR_OK;
}
-
static int send_longcommand(int fd, uint8_t command, uint32_t data)
{
char buf[5];
- g_message("ols: sending cmd 0x%.2x data 0x%.8x", command, data);
+ sr_dbg("ols: sending cmd 0x%.2x data 0x%.8x", command, data);
buf[0] = command;
buf[1] = (data & 0xff000000) >> 24;
buf[2] = (data & 0xff0000) >> 16;
buf[3] = (data & 0xff00) >> 8;
buf[4] = data & 0xff;
- if(write(fd, buf, 5) != 5)
- return SIGROK_ERR;
+ if (serial_write(fd, buf, 5) != 5)
+ return SR_ERR;
- return SIGROK_OK;
+ return SR_OK;
}
-static int configure_probes(GSList *probes)
+static int configure_probes(struct context *ctx, const GSList *probes)
{
- struct probe *probe;
- GSList *l;
+ const struct sr_probe *probe;
+ const GSList *l;
int probe_bit, stage, i;
char *tc;
- probe_mask = 0;
- for(i = 0; i < NUM_TRIGGER_STAGES; i++) {
- trigger_mask[i] = 0;
- trigger_value[i] = 0;
+ ctx->probe_mask = 0;
+ for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
+ ctx->trigger_mask[i] = 0;
+ ctx->trigger_value[i] = 0;
}
- for(l = probes; l; l = l->next) {
- probe = (struct probe *) l->data;
- if(!probe->enabled)
+ ctx->num_stages = 0;
+ for (l = probes; l; l = l->next) {
+ probe = (const struct sr_probe *)l->data;
+ if (!probe->enabled)
continue;
- /* set up the probe mask for later configuration into the flag register */
+ /*
+ * Set up the probe mask for later configuration into the
+ * flag register.
+ */
probe_bit = 1 << (probe->index - 1);
- probe_mask |= probe_bit;
+ ctx->probe_mask |= probe_bit;
- if(probe->trigger)
+ if (!probe->trigger)
continue;
- /* configure trigger mask and value */
+ /* Configure trigger mask and value. */
stage = 0;
- for(tc = probe->trigger; tc && *tc; tc++) {
- trigger_mask[stage] |= probe_bit;
- if(*tc == '1')
- trigger_value[stage] |= probe_bit;
+ for (tc = probe->trigger; tc && *tc; tc++) {
+ ctx->trigger_mask[stage] |= probe_bit;
+ if (*tc == '1')
+ ctx->trigger_value[stage] |= probe_bit;
stage++;
- if(stage > 3)
- /* TODO: only supporting parallel mode, with up to 4 stages */
- return SIGROK_NOK;
+ if (stage > 3)
+ /*
+ * TODO: Only supporting parallel mode, with
+ * up to 4 stages.
+ */
+ return SR_ERR;
}
+ if (stage > ctx->num_stages)
+ ctx->num_stages = stage;
}
- return SIGROK_OK;
+ return SR_OK;
}
+static uint32_t reverse16(uint32_t in)
+{
+ uint32_t out;
+
+ out = (in & 0xff) << 8;
+ out |= (in & 0xff00) >> 8;
+ out |= (in & 0xff0000) << 8;
+ out |= (in & 0xff000000) >> 8;
+
+ return out;
+}
-static void byteswap(uint32_t *in)
+static uint32_t reverse32(uint32_t in)
{
uint32_t out;
- out = (*in & 0xff) << 8;
- out |= (*in & 0xff00) >> 8;
- out |= (*in & 0xff0000) << 8;
- out |= (*in & 0xff000000) >> 8;
- *in = out;
+ out = (in & 0xff) << 24;
+ out |= (in & 0xff00) << 8;
+ out |= (in & 0xff0000) >> 8;
+ out |= (in & 0xff000000) >> 24;
+
+ return out;
+}
+
+static struct context *ols_dev_new(void)
+{
+ struct context *ctx;
+
+ /* TODO: Is 'ctx' ever g_free()'d? */
+ if (!(ctx = g_try_malloc0(sizeof(struct context)))) {
+ sr_err("ols: %s: ctx malloc failed", __func__);
+ return NULL;
+ }
+
+ ctx->trigger_at = -1;
+ ctx->probe_mask = 0xffffffff;
+ ctx->cur_samplerate = SR_KHZ(200);
+ ctx->serial = NULL;
+ return ctx;
}
+static struct sr_dev_inst *get_metadata(int fd)
+{
+ struct sr_dev_inst *sdi;
+ struct context *ctx;
+ uint32_t tmp_int;
+ uint8_t key, type, token;
+ GString *tmp_str, *devname, *version;
+ gchar tmp_c;
+
+ sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, NULL, NULL, NULL);
+ ctx = ols_dev_new();
+ sdi->priv = ctx;
+
+ devname = g_string_new("");
+ version = g_string_new("");
+
+ key = 0xff;
+ while (key) {
+ if (serial_read(fd, &key, 1) != 1 || key == 0x00)
+ break;
+ type = key >> 5;
+ token = key & 0x1f;
+ switch (type) {
+ case 0:
+ /* NULL-terminated string */
+ tmp_str = g_string_new("");
+ while (serial_read(fd, &tmp_c, 1) == 1 && tmp_c != '\0')
+ g_string_append_c(tmp_str, tmp_c);
+ sr_dbg("ols: got metadata key 0x%.2x value '%s'",
+ key, tmp_str->str);
+ switch (token) {
+ case 0x01:
+ /* Device name */
+ devname = g_string_append(devname, tmp_str->str);
+ break;
+ case 0x02:
+ /* FPGA firmware version */
+ if (version->len)
+ g_string_append(version, ", ");
+ g_string_append(version, "FPGA version ");
+ g_string_append(version, tmp_str->str);
+ break;
+ case 0x03:
+ /* Ancillary version */
+ if (version->len)
+ g_string_append(version, ", ");
+ g_string_append(version, "Ancillary version ");
+ g_string_append(version, tmp_str->str);
+ break;
+ default:
+ sr_info("ols: unknown token 0x%.2x: '%s'",
+ token, tmp_str->str);
+ break;
+ }
+ g_string_free(tmp_str, TRUE);
+ break;
+ case 1:
+ /* 32-bit unsigned integer */
+ if (serial_read(fd, &tmp_int, 4) != 4)
+ break;
+ tmp_int = reverse32(tmp_int);
+ sr_dbg("ols: got metadata key 0x%.2x value 0x%.8x",
+ key, tmp_int);
+ switch (token) {
+ case 0x00:
+ /* Number of usable probes */
+ ctx->num_probes = tmp_int;
+ break;
+ case 0x01:
+ /* Amount of sample memory available (bytes) */
+ ctx->max_samples = tmp_int;
+ break;
+ case 0x02:
+ /* Amount of dynamic memory available (bytes) */
+ /* what is this for? */
+ break;
+ case 0x03:
+ /* Maximum sample rate (hz) */
+ ctx->max_samplerate = tmp_int;
+ break;
+ case 0x04:
+ /* protocol version */
+ ctx->protocol_version = tmp_int;
+ break;
+ default:
+ sr_info("ols: unknown token 0x%.2x: 0x%.8x",
+ token, tmp_int);
+ break;
+ }
+ break;
+ case 2:
+ /* 8-bit unsigned integer */
+ if (serial_read(fd, &tmp_c, 1) != 1)
+ break;
+ sr_dbg("ols: got metadata key 0x%.2x value 0x%.2x",
+ key, tmp_c);
+ switch (token) {
+ case 0x00:
+ /* Number of usable probes */
+ ctx->num_probes = tmp_c;
+ break;
+ case 0x01:
+ /* protocol version */
+ ctx->protocol_version = tmp_c;
+ break;
+ default:
+ sr_info("ols: unknown token 0x%.2x: 0x%.2x",
+ token, tmp_c);
+ break;
+ }
+ break;
+ default:
+ /* unknown type */
+ break;
+ }
+ }
+
+ sdi->model = devname->str;
+ sdi->version = version->str;
+ g_string_free(devname, FALSE);
+ g_string_free(version, FALSE);
+
+ return sdi;
+}
-static int hw_init(char *deviceinfo)
+static int hw_init(const char *devinfo)
{
- struct sigrok_device_instance *sdi;
+ struct sr_dev_inst *sdi;
+ struct context *ctx;
GSList *ports, *l;
- GPollFD *fds;
- struct termios term, *prev_termios;
+ GPollFD *fds, probefd;
int devcnt, final_devcnt, num_ports, fd, ret, i;
- char buf[8], **device_names;
+ char buf[8], **dev_names, **serial_params;
+
+ final_devcnt = 0;
- if(deviceinfo)
- ports = g_slist_append(NULL, strdup(deviceinfo));
+ if (devinfo)
+ ports = g_slist_append(NULL, g_strdup(devinfo));
else
- /* no specific device given, so scan all serial ports */
+ /* No specific device given, so scan all serial ports. */
ports = list_serial_ports();
num_ports = g_slist_length(ports);
- fds = calloc(1, num_ports * sizeof(GPollFD));
- device_names = malloc(num_ports * (sizeof(char *)));
- prev_termios = malloc(num_ports * sizeof(struct termios));
+
+ if (!(fds = g_try_malloc0(num_ports * sizeof(GPollFD)))) {
+ sr_err("ols: %s: fds malloc failed", __func__);
+ goto hw_init_free_ports; /* TODO: SR_ERR_MALLOC. */
+ }
+
+ if (!(dev_names = g_try_malloc(num_ports * sizeof(char *)))) {
+ sr_err("ols: %s: dev_names malloc failed", __func__);
+ goto hw_init_free_fds; /* TODO: SR_ERR_MALLOC. */
+ }
+
+ if (!(serial_params = g_try_malloc(num_ports * sizeof(char *)))) {
+ sr_err("ols: %s: serial_params malloc failed", __func__);
+ goto hw_init_free_dev_names; /* TODO: SR_ERR_MALLOC. */
+ }
+
devcnt = 0;
- for(l = ports; l; l = l->next) {
- /* The discovery procedure is like this: first send the Reset command (0x00) 5 times,
- * since the device could be anywhere in a 5-byte command. Then send the ID command
- * (0x02). If the device responds with 4 bytes ("OLS1" or "SLA1"), we have a match.
- * Since it may take the device a while to respond at 115Kb/s, we do all the sending
- * first, then wait for all of them to respond with g_poll().
+ for (l = ports; l; l = l->next) {
+ /* The discovery procedure is like this: first send the Reset
+ * command (0x00) 5 times, since the device could be anywhere
+ * in a 5-byte command. Then send the ID command (0x02).
+ * If the device responds with 4 bytes ("OLS1" or "SLA1"), we
+ * have a match.
+ *
+ * Since it may take the device a while to respond at 115Kb/s,
+ * we do all the sending first, then wait for all of them to
+ * respond with g_poll().
*/
- g_message("probing %s...", (char *) l->data);
- fd = open(l->data, O_RDWR | O_NONBLOCK);
- if(fd != -1) {
- tcgetattr(fd, &prev_termios[devcnt]);
- tcgetattr(fd, &term);
- cfsetispeed(&term, SERIAL_SPEED);
- term.c_cflag &= ~CSIZE;
- term.c_cflag |= CS8;
- term.c_cflag &= ~CSTOPB;
- term.c_cflag |= IXON | IXOFF;
- term.c_iflag |= IGNPAR;
- tcsetattr(fd, TCSADRAIN, &term);
- ret = SIGROK_OK;
- for(i = 0; i < 5; i++) {
- if( (ret = send_shortcommand(fd, CMD_RESET)) != SIGROK_OK) {
- /* serial port is not writable... restore port settings */
- tcsetattr(fd, TCSADRAIN, &prev_termios[devcnt]);
- close(fd);
+ sr_info("ols: probing %s...", (char *)l->data);
+ fd = serial_open(l->data, O_RDWR | O_NONBLOCK);
+ if (fd != -1) {
+ serial_params[devcnt] = serial_backup_params(fd);
+ serial_set_params(fd, 115200, 8, 0, 1, 2);
+ ret = SR_OK;
+ for (i = 0; i < 5; i++) {
+ if ((ret = send_shortcommand(fd,
+ CMD_RESET)) != SR_OK) {
+ /* Serial port is not writable. */
break;
}
}
- if(ret != SIGROK_OK)
+ if (ret != SR_OK) {
+ serial_restore_params(fd,
+ serial_params[devcnt]);
+ serial_close(fd);
continue;
+ }
send_shortcommand(fd, CMD_ID);
fds[devcnt].fd = fd;
fds[devcnt].events = G_IO_IN;
- device_names[devcnt] = strdup(l->data);
+ dev_names[devcnt] = g_strdup(l->data);
devcnt++;
}
- free(l->data);
+ g_free(l->data);
}
- /* 2ms should do it, that's enough time for 28 bytes to go over the bus */
- usleep(2000);
+ /* 2ms isn't enough for reliable transfer with pl2303, let's try 10 */
+ usleep(10000);
- final_devcnt = 0;
g_poll(fds, devcnt, 1);
- for(i = 0; i < devcnt; i++) {
- if(fds[i].revents == G_IO_IN) {
- if(read(fds[i].fd, buf, 4) == 4) {
- if(!strncmp(buf, "1SLO", 4) || !strncmp(buf, "1ALS", 4)) {
- if(!strncmp(buf, "1SLO", 4))
- sdi = sigrok_device_instance_new(final_devcnt, ST_INACTIVE,
- "Openbench", "Logic Sniffer", "v1.0");
- else
- sdi = sigrok_device_instance_new(final_devcnt, ST_INACTIVE,
- "Sump", "Logic Analyzer", "v1.0");
- sdi->serial = serial_device_instance_new(device_names[i], -1);
- device_instances = g_slist_append(device_instances, sdi);
- final_devcnt++;
- close(fds[i].fd);
- fds[i].fd = 0;
- }
- }
- free(device_names[i]);
+
+ for (i = 0; i < devcnt; i++) {
+ if (fds[i].revents != G_IO_IN)
+ continue;
+ if (serial_read(fds[i].fd, buf, 4) != 4)
+ continue;
+ if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
+ continue;
+
+ /* definitely using the OLS protocol, check if it supports
+ * the metadata command
+ */
+ send_shortcommand(fds[i].fd, CMD_METADATA);
+ probefd.fd = fds[i].fd;
+ probefd.events = G_IO_IN;
+ if (g_poll(&probefd, 1, 10) > 0) {
+ /* got metadata */
+ sdi = get_metadata(fds[i].fd);
+ sdi->index = final_devcnt;
+ ctx = sdi->priv;
+ } else {
+ /* not an OLS -- some other board that uses the sump protocol */
+ sdi = sr_dev_inst_new(final_devcnt, SR_ST_INACTIVE,
+ "Sump", "Logic Analyzer", "v1.0");
+ ctx = ols_dev_new();
+ ctx->num_probes = 32;
+ sdi->priv = ctx;
}
+ ctx->serial = sr_serial_dev_inst_new(dev_names[i], -1);
+ dev_insts = g_slist_append(dev_insts, sdi);
+ final_devcnt++;
+ serial_close(fds[i].fd);
+ fds[i].fd = 0;
+ }
- if(fds[i].fd != 0) {
- tcsetattr(fds[i].fd, TCSADRAIN, &prev_termios[i]);
- close(fds[i].fd);
+ /* clean up after all the probing */
+ for (i = 0; i < devcnt; i++) {
+ if (fds[i].fd != 0) {
+ serial_restore_params(fds[i].fd, serial_params[i]);
+ serial_close(fds[i].fd);
}
+ g_free(serial_params[i]);
+ g_free(dev_names[i]);
}
- free(fds);
- free(device_names);
- free(prev_termios);
+ g_free(serial_params);
+hw_init_free_dev_names:
+ g_free(dev_names);
+hw_init_free_fds:
+ g_free(fds);
+hw_init_free_ports:
g_slist_free(ports);
- cur_samplerate = samplerates.low;
-
return final_devcnt;
}
-
-static int hw_opendev(int device_index)
+static int hw_dev_open(int dev_index)
{
- struct sigrok_device_instance *sdi;
+ struct sr_dev_inst *sdi;
+ struct context *ctx;
- if(!(sdi = get_sigrok_device_instance(device_instances, device_index)))
- return SIGROK_ERR;
+ if (!(sdi = sr_dev_inst_get(dev_insts, dev_index)))
+ return SR_ERR;
- sdi->serial->fd = open(sdi->serial->port, O_RDWR);
- if(sdi->serial->fd == -1)
- return SIGROK_ERR;
+ ctx = sdi->priv;
- sdi->status = ST_ACTIVE;
+ ctx->serial->fd = serial_open(ctx->serial->port, O_RDWR);
+ if (ctx->serial->fd == -1)
+ return SR_ERR;
- return SIGROK_OK;
-}
+ sdi->status = SR_ST_ACTIVE;
+ return SR_OK;
+}
-static void hw_closedev(int device_index)
+static int hw_dev_close(int dev_index)
{
- struct sigrok_device_instance *sdi;
+ struct sr_dev_inst *sdi;
+ struct context *ctx;
- if(!(sdi = get_sigrok_device_instance(device_instances, device_index)))
- return;
+ if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) {
+ sr_err("ols: %s: sdi was NULL", __func__);
+ return SR_ERR_BUG;
+ }
+
+ ctx = sdi->priv;
- if(sdi->serial->fd != -1) {
- close(sdi->serial->fd);
- sdi->serial->fd = -1;
- sdi->status = ST_INACTIVE;
+ /* TODO */
+ if (ctx->serial->fd != -1) {
+ serial_close(ctx->serial->fd);
+ ctx->serial->fd = -1;
+ sdi->status = SR_ST_INACTIVE;
}
+ return SR_OK;
}
-
-static void hw_cleanup(void)
+static int hw_cleanup(void)
{
GSList *l;
- struct sigrok_device_instance *sdi;
-
- /* properly close all devices */
- for(l = device_instances; l; l = l->next) {
- sdi = l->data;
- if(sdi->serial->fd != -1)
- close(sdi->serial->fd);
- sigrok_device_instance_free(sdi);
+ struct sr_dev_inst *sdi;
+ struct context *ctx;
+ int ret = SR_OK;
+
+ /* Properly close and free all devices. */
+ for (l = dev_insts; l; l = l->next) {
+ if (!(sdi = l->data)) {
+ /* Log error, but continue cleaning up the rest. */
+ sr_err("ols: %s: sdi was NULL, continuing", __func__);
+ ret = SR_ERR_BUG;
+ continue;
+ }
+ if (!(ctx = sdi->priv)) {
+ /* Log error, but continue cleaning up the rest. */
+ sr_err("ols: %s: sdi->priv was NULL, continuing",
+ __func__);
+ ret = SR_ERR_BUG;
+ continue;
+ }
+ /* TODO: Check for serial != NULL. */
+ if (ctx->serial->fd != -1)
+ serial_close(ctx->serial->fd);
+ sr_serial_dev_inst_free(ctx->serial);
+ sr_dev_inst_free(sdi);
}
- g_slist_free(device_instances);
- device_instances = NULL;
+ g_slist_free(dev_insts);
+ dev_insts = NULL;
+ return ret;
}
-
-static void *hw_get_device_info(int device_index, int device_info_id)
+static const void *hw_dev_info_get(int dev_index, int dev_info_id)
{
- struct sigrok_device_instance *sdi;
- void *info;
+ struct sr_dev_inst *sdi;
+ struct context *ctx;
+ const void *info;
- if( !(sdi = get_sigrok_device_instance(device_instances, device_index)) )
+ if (!(sdi = sr_dev_inst_get(dev_insts, dev_index)))
return NULL;
+ ctx = sdi->priv;
info = NULL;
- switch(device_info_id)
- {
- case DI_INSTANCE:
+ switch (dev_info_id) {
+ case SR_DI_INST:
info = sdi;
break;
- case DI_NUM_PROBES:
+ case SR_DI_NUM_PROBES:
info = GINT_TO_POINTER(NUM_PROBES);
break;
- case DI_SAMPLERATES:
+ case SR_DI_PROBE_NAMES:
+ info = probe_names;
+ break;
+ case SR_DI_SAMPLERATES:
info = &samplerates;
break;
- case DI_TRIGGER_TYPES:
- info = (char *) TRIGGER_TYPES;
+ case SR_DI_TRIGGER_TYPES:
+ info = (char *)TRIGGER_TYPES;
break;
- case DI_CUR_SAMPLERATE:
- info = &cur_samplerate;
+ case SR_DI_CUR_SAMPLERATE:
+ info = &ctx->cur_samplerate;
break;
}
return info;
}
-
-static int hw_get_status(int device_index)
+static int hw_dev_status_get(int dev_index)
{
- struct sigrok_device_instance *sdi;
+ struct sr_dev_inst *sdi;
- if(!(sdi = get_sigrok_device_instance(device_instances, device_index)))
- return ST_NOT_FOUND;
+ if (!(sdi = sr_dev_inst_get(dev_insts, dev_index)))
+ return SR_ST_NOT_FOUND;
return sdi->status;
}
-
-static int *hw_get_capabilities(void)
+static const int *hw_hwcap_get_all(void)
{
-
- return capabilities;
+ return hwcaps;
}
-
-static int set_configuration_samplerate(struct sigrok_device_instance *sdi, uint64_t samplerate)
+static int set_samplerate(struct sr_dev_inst *sdi, uint64_t samplerate)
{
- uint32_t divider;
-
- if(samplerate < samplerates.low || samplerate > samplerates.high)
- return SIGROK_ERR_SAMPLERATE;
-
- if(samplerate > CLOCK_RATE) {
- flag_reg |= FLAG_DEMUX;
- divider = (CLOCK_RATE * 2 / samplerate) - 1;
- }
- else {
- flag_reg &= ~FLAG_DEMUX;
- divider = (CLOCK_RATE / samplerate) - 1;
+ struct context *ctx;
+
+ ctx = sdi->priv;
+ if (ctx->max_samplerate) {
+ if (samplerate > ctx->max_samplerate)
+ return SR_ERR_SAMPLERATE;
+ } else if (samplerate < samplerates.low || samplerate > samplerates.high)
+ return SR_ERR_SAMPLERATE;
+
+ if (samplerate > CLOCK_RATE) {
+ ctx->flag_reg |= FLAG_DEMUX;
+ ctx->cur_samplerate_divider = (CLOCK_RATE * 2 / samplerate) - 1;
+ } else {
+ ctx->flag_reg &= ~FLAG_DEMUX;
+ ctx->cur_samplerate_divider = (CLOCK_RATE / samplerate) - 1;
}
- divider = htonl(divider);
-
- g_message("setting samplerate to %"PRIu64" Hz (divider %u, demux %s)", samplerate, divider,
- flag_reg & FLAG_DEMUX ? "on" : "off");
- if(send_longcommand(sdi->serial->fd, CMD_SET_DIVIDER, divider) != SIGROK_OK)
- return SIGROK_ERR;
- cur_samplerate = samplerate;
- return SIGROK_OK;
+ /* Calculate actual samplerate used and complain if it is different
+ * from the requested.
+ */
+ ctx->cur_samplerate = CLOCK_RATE / (ctx->cur_samplerate_divider + 1);
+ if (ctx->flag_reg & FLAG_DEMUX)
+ ctx->cur_samplerate *= 2;
+ if (ctx->cur_samplerate != samplerate)
+ sr_err("ols: can't match samplerate %" PRIu64 ", using %"
+ PRIu64, samplerate, ctx->cur_samplerate);
+
+ return SR_OK;
}
-
-static int hw_set_configuration(int device_index, int capability, void *value)
+static int hw_dev_config_set(int dev_index, int hwcap, const void *value)
{
- struct sigrok_device_instance *sdi;
+ struct sr_dev_inst *sdi;
+ struct context *ctx;
int ret;
- uint64_t *tmp_u64;
+ const uint64_t *tmp_u64;
- if(!(sdi = get_sigrok_device_instance(device_instances, device_index)))
- return SIGROK_ERR;
+ if (!(sdi = sr_dev_inst_get(dev_insts, dev_index)))
+ return SR_ERR;
+ ctx = sdi->priv;
- if(sdi->status != ST_ACTIVE)
- return SIGROK_ERR;
+ if (sdi->status != SR_ST_ACTIVE)
+ return SR_ERR;
- if(capability == HWCAP_SAMPLERATE) {
+ switch (hwcap) {
+ case SR_HWCAP_SAMPLERATE:
+ ret = set_samplerate(sdi, *(const uint64_t *)value);
+ break;
+ case SR_HWCAP_PROBECONFIG:
+ ret = configure_probes(ctx, (const GSList *)value);
+ break;
+ case SR_HWCAP_LIMIT_SAMPLES:
tmp_u64 = value;
- ret = set_configuration_samplerate(sdi, *tmp_u64);
- }
- else if(capability == HWCAP_PROBECONFIG)
- ret = configure_probes( (GSList *) value);
- else if(capability == HWCAP_LIMIT_SAMPLES) {
- limit_samples = strtoull(value, NULL, 10);
- ret = SIGROK_OK;
- }
- else if(capability == HWCAP_CAPTURE_RATIO) {
- capture_ratio = strtol(value, NULL, 10);
- if(capture_ratio < 0 || capture_ratio > 100) {
- capture_ratio = 0;
- ret = SIGROK_ERR;
+ if (*tmp_u64 < MIN_NUM_SAMPLES)
+ return SR_ERR;
+ if (*tmp_u64 > ctx->max_samples)
+ sr_err("ols: sample limit exceeds hw max");
+ ctx->limit_samples = *tmp_u64;
+ sr_info("ols: sample limit %" PRIu64, ctx->limit_samples);
+ ret = SR_OK;
+ break;
+ case SR_HWCAP_CAPTURE_RATIO:
+ ctx->capture_ratio = *(const uint64_t *)value;
+ if (ctx->capture_ratio < 0 || ctx->capture_ratio > 100) {
+ ctx->capture_ratio = 0;
+ ret = SR_ERR;
+ } else
+ ret = SR_OK;
+ break;
+ case SR_HWCAP_RLE:
+ if (GPOINTER_TO_INT(value)) {
+ sr_info("ols: enabling RLE");
+ ctx->flag_reg |= FLAG_RLE;
}
- else
- ret = SIGROK_OK;
+ ret = SR_OK;
+ break;
+ default:
+ ret = SR_ERR;
}
- else
- ret = SIGROK_ERR;
return ret;
}
-
-static int receive_data(int fd, int revents, void *user_data)
+static int receive_data(int fd, int revents, void *cb_data)
{
- static int num_transfers = 0;
- static int num_bytes = 0;
- static char last_sample[4] = {0xff};
- static unsigned char sample[4] = {0}, tmp_sample[4];
- int count, buflen, num_channels, i, j;
- struct datafeed_packet packet;
- unsigned char byte, *buffer;
-
- if(num_transfers++ == 0) {
- /* first time round, means the device started sending data, and will not
- * stop until done. if it stops sending for longer than it takes to send
- * a byte, that means it's finished. we'll double that to 30ms to be sure...
+ struct sr_datafeed_packet packet;
+ struct sr_datafeed_logic logic;
+ struct sr_dev_inst *sdi;
+ struct context *ctx;
+ GSList *l;
+ int num_channels, offset, i, j;
+ unsigned char byte;
+
+ /* Find this device's ctx struct by its fd. */
+ ctx = NULL;
+ for (l = dev_insts; l; l = l->next) {
+ sdi = l->data;
+ ctx = sdi->priv;
+ if (ctx->serial->fd == fd) {
+ break;
+ }
+ ctx = NULL;
+ }
+ if (!ctx)
+ /* Shouldn't happen. */
+ return TRUE;
+
+ if (ctx->num_transfers++ == 0) {
+ /*
+ * First time round, means the device started sending data,
+ * and will not stop until done. If it stops sending for
+ * longer than it takes to send a byte, that means it's
+ * finished. We'll double that to 30ms to be sure...
*/
- source_remove(fd);
- source_add(fd, G_IO_IN, 100, receive_data, user_data);
+ sr_source_remove(fd);
+ sr_source_add(fd, G_IO_IN, 30, receive_data, cb_data);
+ ctx->raw_sample_buf = g_try_malloc(ctx->limit_samples * 4);
+ if (!ctx->raw_sample_buf) {
+ sr_err("ols: %s: ctx->raw_sample_buf malloc failed",
+ __func__);
+ return FALSE;
+ }
+ /* fill with 1010... for debugging */
+ memset(ctx->raw_sample_buf, 0x82, ctx->limit_samples * 4);
}
num_channels = 0;
- for(i = 0x20; i > 0x02; i /= 2)
- if((flag_reg & i) == 0)
+ for (i = 0x20; i > 0x02; i /= 2) {
+ if ((ctx->flag_reg & i) == 0)
num_channels++;
+ }
- if(revents == G_IO_IN && num_transfers / num_channels <= limit_samples) {
- if(read(fd, &byte, 1) != 1)
+ if (revents == G_IO_IN) {
+ if (serial_read(fd, &byte, 1) != 1)
return FALSE;
- sample[num_bytes++] = byte;
- if(num_bytes == num_channels) {
- /* got a full sample */
- if(flag_reg & FLAG_RLE) {
- /* in RLE mode -1 should never come in as a sample, because
- * bit 31 is the "count" flag */
- /* TODO: endianness may be wrong here, could be sample[3] */
- if(sample[0] & 0x80 && !(last_sample[0] & 0x80)) {
- count = (int) (*sample) & 0x7fffffff;
- buffer = g_malloc(count);
- buflen = 0;
- for(i = 0; i < count; i++)
- {
- memcpy(buffer + buflen , last_sample, 4);
- buflen += 4;
- }
- }
- else {
- /* just a single sample, next sample will probably be a count
- * referring to this -- but this one is still a part of the stream
+ /* Ignore it if we've read enough. */
+ if (ctx->num_samples >= ctx->limit_samples)
+ return TRUE;
+
+ ctx->sample[ctx->num_bytes++] = byte;
+ sr_dbg("ols: received byte 0x%.2x", byte);
+ if (ctx->num_bytes == num_channels) {
+ /* Got a full sample. */
+ sr_dbg("ols: received sample 0x%.*x",
+ ctx->num_bytes * 2, *(int *)ctx->sample);
+ if (ctx->flag_reg & FLAG_RLE) {
+ /*
+ * In RLE mode -1 should never come in as a
+ * sample, because bit 31 is the "count" flag.
+ */
+ if (ctx->sample[ctx->num_bytes - 1] & 0x80) {
+ ctx->sample[ctx->num_bytes - 1] &= 0x7f;
+ /*
+ * FIXME: This will only work on
+ * little-endian systems.
*/
- buffer = sample;
- buflen = 4;
+ ctx->rle_count = *(int *)(ctx->sample);
+ sr_dbg("ols: RLE count = %d", ctx->rle_count);
+ ctx->num_bytes = 0;
+ return TRUE;
}
}
- else {
- /* no compression */
- buffer = sample;
- buflen = 4;
+ ctx->num_samples += ctx->rle_count + 1;
+ if (ctx->num_samples > ctx->limit_samples) {
+ /* Save us from overrunning the buffer. */
+ ctx->rle_count -= ctx->num_samples - ctx->limit_samples;
+ ctx->num_samples = ctx->limit_samples;
}
- if(num_channels < 4) {
- /* some channel groups may have been turned off, to speed up transfer
- * between the hardware and the PC. expand that here before submitting
- * it over the session bus -- whatever is listening on the bus will be
- * expecting a full 32-bit sample, based on the number of probes.
+ if (num_channels < 4) {
+ /*
+ * Some channel groups may have been turned
+ * off, to speed up transfer between the
+ * hardware and the PC. Expand that here before
+ * submitting it over the session bus --
+ * whatever is listening on the bus will be
+ * expecting a full 32-bit sample, based on
+ * the number of probes.
*/
j = 0;
- memset(tmp_sample, 0, 4);
- for(i = 0; i < 4; i++) {
- if((flag_reg & (8 >> i)) == 0) {
- /* this channel group was enabled, copy from received sample */
- tmp_sample[i] = sample[j++];
+ memset(ctx->tmp_sample, 0, 4);
+ for (i = 0; i < 4; i++) {
+ if (((ctx->flag_reg >> 2) & (1 << i)) == 0) {
+ /*
+ * This channel group was
+ * enabled, copy from received
+ * sample.
+ */
+ ctx->tmp_sample[i] = ctx->sample[j++];
}
}
- memcpy(sample, tmp_sample, 4);
+ memcpy(ctx->sample, ctx->tmp_sample, 4);
+ sr_dbg("ols: full sample 0x%.8x", *(int *)ctx->sample);
}
- /* send it all to the session bus */
- packet.type = DF_LOGIC32;
- packet.length = buflen;
- packet.payload = buffer;
- session_bus(user_data, &packet);
- if(buffer == sample)
- memcpy(last_sample, buffer, num_channels);
- else
- g_free(buffer);
-
- memset(sample, 0, 4);
- num_bytes = 0;
+ /* the OLS sends its sample buffer backwards.
+ * store it in reverse order here, so we can dump
+ * this on the session bus later.
+ */
+ offset = (ctx->limit_samples - ctx->num_samples) * 4;
+ for (i = 0; i <= ctx->rle_count; i++) {
+ memcpy(ctx->raw_sample_buf + offset + (i * 4),
+ ctx->sample, 4);
+ }
+ memset(ctx->sample, 0, 4);
+ ctx->num_bytes = 0;
+ ctx->rle_count = 0;
}
- }
- else {
- /* this is the main loop telling us a timeout was reached, or we've
- * acquired all the samples we asked for -- we're done */
- tcflush(fd, TCIOFLUSH);
- close(fd);
- packet.type = DF_END;
- packet.length = 0;
- session_bus(user_data, &packet);
+ } else {
+ /*
+ * This is the main loop telling us a timeout was reached, or
+ * we've acquired all the samples we asked for -- we're done.
+ * Send the (properly-ordered) buffer to the frontend.
+ */
+ if (ctx->trigger_at != -1) {
+ /* a trigger was set up, so we need to tell the frontend
+ * about it.
+ */
+ if (ctx->trigger_at > 0) {
+ /* there are pre-trigger samples, send those first */
+ packet.type = SR_DF_LOGIC;
+ packet.payload = &logic;
+ logic.length = ctx->trigger_at * 4;
+ logic.unitsize = 4;
+ logic.data = ctx->raw_sample_buf +
+ (ctx->limit_samples - ctx->num_samples) * 4;
+ sr_session_send(cb_data, &packet);
+ }
+
+ /* send the trigger */
+ packet.type = SR_DF_TRIGGER;
+ sr_session_send(cb_data, &packet);
+
+ /* send post-trigger samples */
+ packet.type = SR_DF_LOGIC;
+ packet.payload = &logic;
+ logic.length = (ctx->num_samples * 4) - (ctx->trigger_at * 4);
+ logic.unitsize = 4;
+ logic.data = ctx->raw_sample_buf + ctx->trigger_at * 4 +
+ (ctx->limit_samples - ctx->num_samples) * 4;
+ sr_session_send(cb_data, &packet);
+ } else {
+ /* no trigger was used */
+ packet.type = SR_DF_LOGIC;
+ packet.payload = &logic;
+ logic.length = ctx->num_samples * 4;
+ logic.unitsize = 4;
+ logic.data = ctx->raw_sample_buf +
+ (ctx->limit_samples - ctx->num_samples) * 4;
+ sr_session_send(cb_data, &packet);
+ }
+ g_free(ctx->raw_sample_buf);
+
+ serial_flush(fd);
+ serial_close(fd);
+ packet.type = SR_DF_END;
+ sr_session_send(cb_data, &packet);
}
return TRUE;
}
-
-static int hw_start_acquisition(int device_index, gpointer session_device_id)
+static int hw_dev_acquisition_start(int dev_index, void *cb_data)
{
- struct datafeed_packet *packet;
- struct datafeed_header *header;
- struct sigrok_device_instance *sdi;
- int i;
+ struct sr_datafeed_packet *packet;
+ struct sr_datafeed_header *header;
+ struct sr_datafeed_meta_logic meta;
+ struct sr_dev_inst *sdi;
+ struct context *ctx;
+ uint32_t trigger_config[4];
uint32_t data;
uint16_t readcount, delaycount;
uint8_t changrp_mask;
+ int num_channels;
+ int i;
- if(!(sdi = get_sigrok_device_instance(device_instances, device_index)))
- return SIGROK_ERR;
-
- if(sdi->status != ST_ACTIVE)
- return SIGROK_ERR;
-
- if(trigger_mask[0]) {
- /* trigger masks */
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, trigger_mask[0]) != SIGROK_OK)
- return SIGROK_NOK;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_1, trigger_mask[1]) != SIGROK_OK)
- return SIGROK_NOK;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_2, trigger_mask[2]) != SIGROK_OK)
- return SIGROK_NOK;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_3, trigger_mask[3]) != SIGROK_OK)
- return SIGROK_NOK;
-
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, trigger_value[0]) != SIGROK_OK)
- return SIGROK_NOK;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_1, trigger_value[1]) != SIGROK_OK)
- return SIGROK_NOK;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_2, trigger_value[2]) != SIGROK_OK)
- return SIGROK_NOK;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_3, trigger_value[3]) != SIGROK_OK)
- return SIGROK_NOK;
-
- /* trigger configuration */
- /* TODO: the start flag should only be on the last used stage I think... */
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, 0x00000008) != SIGROK_OK)
- return SIGROK_NOK;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_1, 0x00000000) != SIGROK_OK)
- return SIGROK_NOK;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_2, 0x00000000) != SIGROK_OK)
- return SIGROK_NOK;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_3, 0x00000000) != SIGROK_OK)
- return SIGROK_NOK;
- delaycount = limit_samples / 4 * (capture_ratio / 100);
- } else {
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_MASK_0, trigger_mask[0]) != SIGROK_OK)
- return SIGROK_NOK;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_VALUE_0, trigger_value[0]) != SIGROK_OK)
- return SIGROK_NOK;
- if(send_longcommand(sdi->serial->fd, CMD_SET_TRIGGER_CONFIG_0, 0x00000008) != SIGROK_OK)
- return SIGROK_NOK;
- delaycount = limit_samples / 4;
- }
+ if (!(sdi = sr_dev_inst_get(dev_insts, dev_index)))
+ return SR_ERR;
- set_configuration_samplerate(sdi, cur_samplerate);
+ ctx = sdi->priv;
- /* send sample limit and pre/post-trigger capture ratio */
- readcount = limit_samples / 4;
- if(flag_reg & FLAG_DEMUX) {
- data = (delaycount - 8) & 0xfff8 << 13;
- data |= (readcount - 4) & 0xffff;
- } else {
- flag_reg |= FLAG_FILTER;
- data = (readcount - 1) << 16;
- data |= (delaycount - 1);
- }
- /* TODO: htonl()? */
- byteswap(&data);
- if(send_longcommand(sdi->serial->fd, CMD_CAPTURE_SIZE, data) != SIGROK_OK)
- return SIGROK_ERR;
-
- /* flag register */
- /* enable/disable channel groups in the flag register according to the
- * probe mask. The register stores them backwards, hence shift right from 1000.
+ if (sdi->status != SR_ST_ACTIVE)
+ return SR_ERR;
+
+ /*
+ * Enable/disable channel groups in the flag register according to the
+ * probe mask. Calculate this here, because num_channels is needed
+ * to limit readcount.
*/
changrp_mask = 0;
- for(i = 0; i < 4; i++)
- {
- if(probe_mask & (0xff << (i * 8)))
- changrp_mask |= (8 >> i);
+ num_channels = 0;
+ for (i = 0; i < 4; i++) {
+ if (ctx->probe_mask & (0xff << (i * 8))) {
+ changrp_mask |= (1 << i);
+ num_channels++;
+ }
}
- /* but the flag register wants them here, with 1 meaning "disable channel" */
- flag_reg |= ~(changrp_mask << 2) & 0x3c;
-
- data = flag_reg << 24;
- if(send_longcommand(sdi->serial->fd, CMD_SET_FLAGS, data) != SIGROK_OK)
- return SIGROK_NOK;
-
- /* start acquisition on the device */
- if(send_shortcommand(sdi->serial->fd, CMD_RUN) != SIGROK_OK)
- return SIGROK_ERR;
-
- source_add(sdi->serial->fd, G_IO_IN, -1, receive_data, session_device_id);
-
- /* send header packet to the session bus */
- packet = g_malloc(sizeof(struct datafeed_packet));
- header = g_malloc(sizeof(struct datafeed_header));
- if(!packet || !header)
- return SIGROK_ERR;
- packet->type = DF_HEADER;
- packet->length = sizeof(struct datafeed_header);
- packet->payload = (unsigned char *) header;
+
+ /*
+ * Limit readcount to prevent reading past the end of the hardware
+ * buffer.
+ */
+ readcount = MIN(ctx->max_samples / num_channels, ctx->limit_samples) / 4;
+
+ memset(trigger_config, 0, 16);
+ trigger_config[ctx->num_stages - 1] |= 0x08;
+ if (ctx->trigger_mask[0]) {
+ delaycount = readcount * (1 - ctx->capture_ratio / 100.0);
+ ctx->trigger_at = (readcount - delaycount) * 4 - ctx->num_stages;
+
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_MASK_0,
+ reverse32(ctx->trigger_mask[0])) != SR_OK)
+ return SR_ERR;
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_VALUE_0,
+ reverse32(ctx->trigger_value[0])) != SR_OK)
+ return SR_ERR;
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_CONFIG_0,
+ trigger_config[0]) != SR_OK)
+ return SR_ERR;
+
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_MASK_1,
+ reverse32(ctx->trigger_mask[1])) != SR_OK)
+ return SR_ERR;
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_VALUE_1,
+ reverse32(ctx->trigger_value[1])) != SR_OK)
+ return SR_ERR;
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_CONFIG_1,
+ trigger_config[1]) != SR_OK)
+ return SR_ERR;
+
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_MASK_2,
+ reverse32(ctx->trigger_mask[2])) != SR_OK)
+ return SR_ERR;
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_VALUE_2,
+ reverse32(ctx->trigger_value[2])) != SR_OK)
+ return SR_ERR;
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_CONFIG_2,
+ trigger_config[2]) != SR_OK)
+ return SR_ERR;
+
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_MASK_3,
+ reverse32(ctx->trigger_mask[3])) != SR_OK)
+ return SR_ERR;
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_VALUE_3,
+ reverse32(ctx->trigger_value[3])) != SR_OK)
+ return SR_ERR;
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_CONFIG_3,
+ trigger_config[3]) != SR_OK)
+ return SR_ERR;
+ } else {
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_MASK_0,
+ ctx->trigger_mask[0]) != SR_OK)
+ return SR_ERR;
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_VALUE_0,
+ ctx->trigger_value[0]) != SR_OK)
+ return SR_ERR;
+ if (send_longcommand(ctx->serial->fd, CMD_SET_TRIGGER_CONFIG_0,
+ 0x00000008) != SR_OK)
+ return SR_ERR;
+ delaycount = readcount;
+ }
+
+ sr_info("ols: setting samplerate to %" PRIu64 " Hz (divider %u, "
+ "demux %s)", ctx->cur_samplerate, ctx->cur_samplerate_divider,
+ ctx->flag_reg & FLAG_DEMUX ? "on" : "off");
+ if (send_longcommand(ctx->serial->fd, CMD_SET_DIVIDER,
+ reverse32(ctx->cur_samplerate_divider)) != SR_OK)
+ return SR_ERR;
+
+ /* Send sample limit and pre/post-trigger capture ratio. */
+ data = ((readcount - 1) & 0xffff) << 16;
+ data |= (delaycount - 1) & 0xffff;
+ if (send_longcommand(ctx->serial->fd, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK)
+ return SR_ERR;
+
+ /* The flag register wants them here, and 1 means "disable channel". */
+ ctx->flag_reg |= ~(changrp_mask << 2) & 0x3c;
+ ctx->flag_reg |= FLAG_FILTER;
+ ctx->rle_count = 0;
+ data = (ctx->flag_reg << 24) | ((ctx->flag_reg << 8) & 0xff0000);
+ if (send_longcommand(ctx->serial->fd, CMD_SET_FLAGS, data) != SR_OK)
+ return SR_ERR;
+
+ /* Start acquisition on the device. */
+ if (send_shortcommand(ctx->serial->fd, CMD_RUN) != SR_OK)
+ return SR_ERR;
+
+ sr_source_add(ctx->serial->fd, G_IO_IN, -1, receive_data,
+ cb_data);
+
+ if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) {
+ sr_err("ols: %s: packet malloc failed", __func__);
+ return SR_ERR_MALLOC;
+ }
+
+ if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) {
+ sr_err("ols: %s: header malloc failed", __func__);
+ g_free(packet);
+ return SR_ERR_MALLOC;
+ }
+
+ /* Send header packet to the session bus. */
+ packet->type = SR_DF_HEADER;
+ packet->payload = (unsigned char *)header;
header->feed_version = 1;
gettimeofday(&header->starttime, NULL);
- header->samplerate = cur_samplerate;
- header->protocol_id = PROTO_RAW;
- header->num_probes = NUM_PROBES;
- session_bus(session_device_id, packet);
+ sr_session_send(cb_data, packet);
+
+ /* Send metadata about the SR_DF_LOGIC packets to come. */
+ packet->type = SR_DF_META_LOGIC;
+ packet->payload = &meta;
+ meta.samplerate = ctx->cur_samplerate;
+ meta.num_probes = NUM_PROBES;
+ sr_session_send(cb_data, packet);
+
g_free(header);
g_free(packet);
- return SIGROK_OK;
+ return SR_OK;
}
-
-static void hw_stop_acquisition(int device_index, gpointer session_device_id)
+/* TODO: This stops acquisition on ALL devices, ignoring dev_index. */
+static int hw_dev_acquisition_stop(int dev_index, void *cb_data)
{
- struct datafeed_packet packet;
-
- packet.type = DF_END;
- packet.length = 0;
- session_bus(session_device_id, &packet);
-
-}
+ struct sr_datafeed_packet packet;
+ /* Avoid compiler warnings. */
+ (void)dev_index;
+ packet.type = SR_DF_END;
+ sr_session_send(cb_data, &packet);
-struct device_plugin ols_plugin_info = {
- "sump",
- 1,
- hw_init,
- hw_cleanup,
+ return SR_OK;
+}
- hw_opendev,
- hw_closedev,
- hw_get_device_info,
- hw_get_status,
- hw_get_capabilities,
- hw_set_configuration,
- hw_start_acquisition,
- hw_stop_acquisition
+SR_PRIV struct sr_dev_driver ols_driver_info = {
+ .name = "ols",
+ .longname = "Openbench Logic Sniffer",
+ .api_version = 1,
+ .init = hw_init,
+ .cleanup = hw_cleanup,
+ .dev_open = hw_dev_open,
+ .dev_close = hw_dev_close,
+ .dev_info_get = hw_dev_info_get,
+ .dev_status_get = hw_dev_status_get,
+ .hwcap_get_all = hw_hwcap_get_all,
+ .dev_config_set = hw_dev_config_set,
+ .dev_acquisition_start = hw_dev_acquisition_start,
+ .dev_acquisition_stop = hw_dev_acquisition_stop,
};
-