* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include "protocol.h"
#include "libsigrok.h"
#include "libsigrok-internal.h"
+#include "protocol.h"
+
+/*
+ * There is no way to get a list of supported samplerates from ALSA. We could
+ * use the 'plughw' interface of ALSA, in which case any format and/or
+ * samplerate conversion would be performed by ALSA. However, we are interested
+ * in the hardware capabilities, and have the infrastructure in sigrok to do so.
+ * We therefore use the 'hw' interface. The downside is that the code gets a
+ * little bulkier, as we have to keep track of the hardware capabilities, and
+ * only use those that the hardware supports. Case in point, ALSA will not give
+ * us a list of capabilities; we have to test for each one individually. Hence,
+ * we keep lists of the capabilities we are interested in.
+ */
+static const unsigned int rates[] = {
+ 5512,
+ 8000,
+ 11025,
+ 12000,
+ 16000,
+ 22050,
+ 24000,
+ 32000,
+ 44100,
+ 48000,
+ 64000,
+ 88200,
+ 96000,
+ 176400,
+ 192000,
+ 384000,
+ 768000, /* Yes, there are sound cards that go this high. */
+};
static void alsa_scan_handle_dev(GSList **devices,
const char *cardname, const char *alsaname,
struct dev_context *devc = NULL;
struct sr_probe *probe;
int ret;
- unsigned int i, channels;
+ unsigned int i, offset, channels, minrate, maxrate, rate;
+ uint64_t hwrates[ARRAY_SIZE(rates)];
+ uint64_t *devrates = NULL;
snd_pcm_t *temp_handle = NULL;
snd_pcm_hw_params_t *hw_params = NULL;
+ char p_name[32];
drvc = di->priv;
/*
- * Get the number of input channels. Those are our sigrok probes.
- * Getting this information needs a detour. We need to open the device,
- * then query it for the number of channels. A side-effect of is that we
- * create a snd_pcm_hw_params_t object. We take advantage of the
+ * Get hardware parameters:
+ * The number of channels, for example, are our sigrok probes. Getting
+ * this information needs a detour. We need to open the device, then
+ * query it and/or test different parameters. A side-effect of is that
+ * we create a snd_pcm_hw_params_t object. We take advantage of the
* situation, and pass this object in our dev_context->hw_params,
* eliminating the need to free() it and malloc() it later.
*/
snd_pcm_hw_params_get_channels_max(hw_params, &channels);
- snd_pcm_close(temp_handle);
+ /*
+ * We need to test if each samplerate between min and max is supported.
+ * Unfortunately, ALSA won't just throw a list at us.
+ */
+ snd_pcm_hw_params_get_rate_min(hw_params, &minrate, 0);
+ snd_pcm_hw_params_get_rate_max(hw_params, &maxrate, 0);
+ for (i = 0, offset = 0; i < ARRAY_SIZE(rates); i++) {
+ rate = rates[i];
+ if (rate < minrate)
+ continue;
+ if (rate > maxrate)
+ break;
+ ret = snd_pcm_hw_params_test_rate(temp_handle, hw_params,
+ rate, 0);
+ if (ret >= 0)
+ hwrates[offset++] = rate;
+ }
+ hwrates[offset++] = 0;
+
+ if ((ret = snd_pcm_close(temp_handle)) < 0)
+ sr_err("Failed to close device: %s.", snd_strerror(ret));
temp_handle = NULL;
/*
- * Now we are done querying the number of channels
- * If we made it here, then it's time to create our sigrok device.
+ * Now we are done querying the hardware parameters.
+ * If we made it here, we know everything we want to know, and it's
+ * time to create our sigrok device.
*/
sr_info("Device %s has %d channels.", alsaname, channels);
if (!(sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, "ALSA:",
cardname, snd_pcm_info_get_name(pcminfo)))) {
- sr_err("Device instance malloc failed.");
+ sr_err("Failed to create device instance.");
goto scan_error_cleanup;
}
if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
sr_err("Device context malloc failed.");
goto scan_error_cleanup;
}
+ if (!(devrates = g_try_malloc(offset * sizeof(uint64_t)))) {
+ sr_err("Samplerate list malloc failed.");
+ goto scan_error_cleanup;
+ }
devc->hwdev = g_strdup(alsaname);
devc->num_probes = channels;
devc->hw_params = hw_params;
+ memcpy(devrates, hwrates, offset * sizeof(uint64_t));
+ devc->samplerates = devrates;
+
sdi->priv = devc;
sdi->driver = di;
for (i = 0; i < devc->num_probes; i++) {
- char p_name[32];
snprintf(p_name, sizeof(p_name), "Ch_%d", i);
- if (!(probe = sr_probe_new(0, SR_PROBE_ANALOG, TRUE, p_name)))
+ if (!(probe = sr_probe_new(i, SR_PROBE_ANALOG, TRUE, p_name)))
goto scan_error_cleanup;
sdi->probes = g_slist_append(sdi->probes, probe);
}
scan_error_cleanup:
if (devc) {
if (devc->hwdev)
- g_free((void*)devc->hwdev);
+ g_free(devc->hwdev);
g_free(devc);
}
+ if (devrates)
+ g_free(devrates);
if (sdi)
sr_dev_inst_free(sdi);
if (hw_params)
snd_pcm_hw_params_free(hw_params);
if (temp_handle)
- snd_pcm_close(temp_handle);
- return;
+ if ((ret = snd_pcm_close(temp_handle)) < 0) {
+ sr_err("Failed to close device: %s.",
+ snd_strerror(ret));
+ }
}
/**
- * \brief Scan all alsa devices, and translate them to sigrok devices
+ * Scan all alsa devices, and translate them to sigrok devices.
+ *
+ * Each alsa device (not alsa card) gets its own sigrok device.
*
- * Each alsa device (not alsa card) gets its own sigrok device
* For example,
* hw:1,0 == sigrok device 0
* hw:1,1 == sigrok device 1
* hw:2,1 == sigrok device 3
* hw:2,2 == sigrok device 4
* [...]
- * \n
+ *
* We don't currently look at alsa subdevices. We only use subdevice 0.
- * Every input device will have a its own channels (Left, Right, etc). Each of
+ * Every input device will have its own channels (left, right, etc). Each of
* those channels gets mapped to a different sigrok probe. A device with 4
* channels will have 4 probes from sigrok's perspective.
*/
int card, ret, dev;
snd_ctl_card_info_t *info;
snd_pcm_info_t *pcminfo;
- const char* cardname;
+ const char *cardname;
+ char hwcard[32], hwdev[32];
+
/* TODO */
(void)options;
- if (snd_ctl_card_info_malloc(&info) < 0) {
- sr_err("Cannot malloc card info.");
+ if ((ret = snd_ctl_card_info_malloc(&info)) < 0) {
+ sr_dbg("Failed to malloc card info: %s.", snd_strerror(ret));
return NULL;
}
- if (snd_pcm_info_malloc(&pcminfo) < 0) {
- sr_err("Cannot malloc pcm info.");
+ if ((ret = snd_pcm_info_malloc(&pcminfo) < 0)) {
+ sr_dbg("Cannot malloc pcm info: %s.", snd_strerror(ret));
return NULL;
}
card = -1;
while (snd_card_next(&card) >= 0 && card >= 0) {
- char hwcard[32];
snprintf(hwcard, sizeof(hwcard), "hw:%d", card);
if ((ret = snd_ctl_open(&handle, hwcard, 0)) < 0) {
- sr_err("Cannot open (%i): %s", card, snd_strerror(ret));
+ sr_dbg("Cannot open (%d): %s.", card, snd_strerror(ret));
continue;
}
if ((ret = snd_ctl_card_info(handle, info)) < 0) {
- sr_err("Cannot get hardware info (%i): %s",
+ sr_dbg("Cannot get hardware info (%d): %s.",
card, snd_strerror(ret));
- snd_ctl_close(handle);
+ if ((ret = snd_ctl_close(handle)) < 0) {
+ sr_dbg("Cannot close device (%d): %s.",
+ card, snd_strerror(ret));
+ }
continue;
}
dev = -1;
while (snd_ctl_pcm_next_device(handle, &dev) >= 0 && dev >= 0) {
- char hwdev[32];
snprintf(hwdev, sizeof(hwdev), "%s,%d", hwcard, dev);
/*
* TODO: We always use subdevice 0, but we have yet to
snd_pcm_info_set_stream(pcminfo,
SND_PCM_STREAM_CAPTURE);
if ((ret = snd_ctl_pcm_info(handle, pcminfo)) < 0) {
- sr_err("Cannot get device info: %s",
- snd_strerror(ret));
+ sr_dbg("Cannot get device info (%s): %s.",
+ hwdev, snd_strerror(ret));
continue;
}
cardname = snd_ctl_card_info_get_name(info);
- sr_info("card %i: %s [%s], device %i: %s [%s]",
+ sr_info("card %d: %s [%s], device %d: %s [%s]",
card, snd_ctl_card_info_get_id(info), cardname,
dev, snd_pcm_info_get_id(pcminfo),
snd_pcm_info_get_name(pcminfo));
alsa_scan_handle_dev(&devices, cardname, hwdev,
di, pcminfo);
}
- snd_ctl_close(handle);
+ if ((ret = snd_ctl_close(handle)) < 0) {
+ sr_dbg("Cannot close device (%d): %s.",
+ card, snd_strerror(ret));
+ }
}
snd_pcm_info_free(pcminfo);
return;
snd_pcm_hw_params_free(devc->hw_params);
+ g_free((void*)devc->samplerates);
sr_dev_inst_free(sdi);
}
+/**
+ * Set the samplerate of the ALSA device.
+ *
+ * Changes the samplerate of the given ALSA device if the specified samplerate
+ * is supported by the hardware.
+ *
+ * The new samplerate is recorded, but it is not applied to the hardware. The
+ * samplerate is applied to the hardware only when acquisition is started via
+ * dev_acquisition_start(), and cannot be changed during acquisition. To change
+ * the samplerate, several steps are needed:
+ *
+ * 1) If acquisition is running, it must first be stopped.
+ * 2) dev_config_set() must be called with the new samplerate.
+ * 3) When starting a new acquisition, the new samplerate is applied.
+ *
+ */
+SR_PRIV int alsa_set_samplerate(const struct sr_dev_inst *sdi,
+ uint64_t newrate)
+{
+ struct dev_context *devc;
+ size_t i;
+ uint64_t rate = 0;
+
+ if (!(devc = sdi->priv))
+ return SR_ERR_ARG;
+
+ i = 0;
+ do {
+ if (newrate == devc->samplerates[i]) {
+ rate = newrate;
+ break;
+ }
+ } while (devc->samplerates[i++] != 0);
+
+ if (!rate) {
+ sr_err("Sample rate %" PRIu64 " not supported.", newrate);
+ return SR_ERR_ARG;
+ }
+
+ devc->cur_samplerate = rate;
+ return SR_OK;
+}
+
SR_PRIV int alsa_receive_data(int fd, int revents, void *cb_data)
{
struct sr_dev_inst *sdi;
struct dev_context *devc;
struct sr_datafeed_packet packet;
struct sr_datafeed_analog analog;
- char inbuf[4096];
+ int16_t inbuf[4096];
int i, x, count, offset, samples_to_get;
- uint16_t tmp16;
+ int16_t tmp16;
+ const float s16norm = 1 / (float)(1 << 15);
(void)fd;
(void)revents;
}
offset = 0;
-
- for (i = 0; i < count; i++) {
+ /*
+ * It's impossible to know what voltage levels the soundcard handles.
+ * Some handle 0 dBV rms, some 0dBV peak-to-peak, +4dbmW (600 ohm), etc
+ * Each of these corresponds to a different voltage, and there is no
+ * mechanism to determine this voltage. The best solution is to send all
+ * audio data as a normalized float, and let the frontend or user worry
+ * about the calibration.
+ */
+ for (i = 0; i < count; i += devc->num_probes) {
for (x = 0; x < devc->num_probes; x++) {
- tmp16 = *(uint16_t *)(inbuf + (i * 4) + (x * 2));
- analog.data[offset++] = (float)tmp16;
+ tmp16 = inbuf[i + x];
+ analog.data[offset++] = tmp16 * s16norm;
}
}
/* Send a sample packet with the analog values. */
+ analog.probes = sdi->probes;
analog.num_samples = count;
analog.mq = SR_MQ_VOLTAGE; /* FIXME */
analog.unit = SR_UNIT_VOLT; /* FIXME */
return TRUE;
}
-