These can be extracted from the vendor's Windows drivers using a tool
from our 'sigrok-util' repository/project.
+ - nexus-osciprime: The Nexus Computing OsciPrime PC oscilloscope needs
+ firmware files. These are available from the vendor website.
+
The following drivers/devices do not need any firmware upload:
- agilent-dmm
- demo
- fluke-dmm
- lascar-el-usb
+ - link-mso19
- mic-985xx
- openbench-logic-sniffer
- rigol-ds1xx2
- brymen-dmm
- colead-slm
- fluke-dmm
+ - link-mso19
- mic-985xx
+ - nexus-osciprime
- openbench-logic-sniffer
- serial-dmm
- tondaj-sl-814
done
+Enabling multimeter / data logger measurement output
+----------------------------------------------------
+
+Some multimeters or data loggers will not start outputting measurement data
+unless a certain action has been performed by the user beforehand. This is
+usually mentioned in the vendor manual of the respective device, but here's
+a short list for convenience:
+
+ - Digitek DT4000ZC: Briefly press the "RS232" button.
+ - PCE PCE-DM32: Briefly press the "RS232" button.
+ - RadioShack 22-812: Press and hold "SELECT" and "RANGE" together.
+ - TekPower TP4000ZC: Briefly press the "RS232" button.
+ - UNI-T UT61D: Press the "REL/RS232/USB" button for roughly 1 second.
+ - V&A VA18B: Keep the "Hz/DUTY" key pressed while powering on the device.
+ - Victor 70C: Press the "REL/RS232" button for roughly 1 second.
+ - Victor 86C: Press the "REL/RS232" button for roughly 1 second.
+
+
ALSA driver
-----------
on other OSes at some point.
+Link Instruments MSO-19
+-----------------------
+
+The driver for the Link Instruments MSO-19 mixed-signal oscilloscope (MSO)
+is currently using libudev (which is a library for the Linux-specific udev
+system). Thus, this driver can currently only compile and work on Linux.
+
+We plan to fix this though, so that it'll work on all other OSes, too.
+
+
ChronoVu LA8 USB VID/PIDs
-------------------------