2 * This file is part of the libsigrok project.
4 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
22 #include <sys/types.h>
26 #include "config.h" /* Needed for HAVE_LIBUSB_1_0 and others. */
27 #include "libsigrok.h"
28 #include "libsigrok-internal.h"
31 #define LOG_PREFIX "hwdriver"
34 extern SR_PRIV struct sr_dev_driver *drivers_list[];
39 * Hardware driver handling in libsigrok.
43 * @defgroup grp_driver Hardware drivers
45 * Hardware driver handling in libsigrok.
50 /* Same key order/grouping as in enum sr_configkey (libsigrok.h). */
51 static struct sr_config_info sr_config_info_data[] = {
53 {SR_CONF_LOGIC_ANALYZER, SR_T_STRING, NULL, "Logic analyzer", NULL},
54 {SR_CONF_OSCILLOSCOPE, SR_T_STRING, NULL, "Oscilloscope", NULL},
55 {SR_CONF_MULTIMETER, SR_T_STRING, NULL, "Multimeter", NULL},
56 {SR_CONF_DEMO_DEV, SR_T_STRING, NULL, "Demo device", NULL},
57 {SR_CONF_SOUNDLEVELMETER, SR_T_STRING, NULL, "Sound level meter", NULL},
58 {SR_CONF_THERMOMETER, SR_T_STRING, NULL, "Thermometer", NULL},
59 {SR_CONF_HYGROMETER, SR_T_STRING, NULL, "Hygrometer", NULL},
60 {SR_CONF_ENERGYMETER, SR_T_STRING, NULL, "Energy meter", NULL},
61 {SR_CONF_DEMODULATOR, SR_T_STRING, NULL, "Demodulator", NULL},
62 {SR_CONF_POWER_SUPPLY, SR_T_STRING, NULL, "Power supply", NULL},
63 {SR_CONF_LCRMETER, SR_T_STRING, NULL, "LCR meter", NULL},
65 /* Driver scan options */
66 {SR_CONF_CONN, SR_T_STRING, "conn",
68 {SR_CONF_SERIALCOMM, SR_T_STRING, "serialcomm",
69 "Serial communication", NULL},
71 /* Device (or channel group) configuration */
72 {SR_CONF_SAMPLERATE, SR_T_UINT64, "samplerate",
74 {SR_CONF_CAPTURE_RATIO, SR_T_UINT64, "captureratio",
75 "Pre-trigger capture ratio", NULL},
76 {SR_CONF_PATTERN_MODE, SR_T_STRING, "pattern",
78 {SR_CONF_RLE, SR_T_BOOL, "rle",
79 "Run length encoding", NULL},
80 {SR_CONF_TRIGGER_SLOPE, SR_T_STRING, "triggerslope",
81 "Trigger slope", NULL},
82 {SR_CONF_TRIGGER_SOURCE, SR_T_STRING, "triggersource",
83 "Trigger source", NULL},
84 {SR_CONF_HORIZ_TRIGGERPOS, SR_T_FLOAT, "horiz_triggerpos",
85 "Horizontal trigger position", NULL},
86 {SR_CONF_BUFFERSIZE, SR_T_UINT64, "buffersize",
88 {SR_CONF_TIMEBASE, SR_T_RATIONAL_PERIOD, "timebase",
90 {SR_CONF_FILTER, SR_T_BOOL, "filter",
92 {SR_CONF_VDIV, SR_T_RATIONAL_VOLT, "vdiv",
94 {SR_CONF_COUPLING, SR_T_STRING, "coupling",
96 {SR_CONF_TRIGGER_MATCH, SR_T_INT32, "triggermatch",
97 "Trigger matches", NULL},
98 {SR_CONF_SAMPLE_INTERVAL, SR_T_UINT64, "sample_interval",
99 "Sample interval", NULL},
100 {SR_CONF_NUM_TIMEBASE, SR_T_INT32, "num_timebase",
101 "Number of time bases", NULL},
102 {SR_CONF_NUM_VDIV, SR_T_INT32, "num_vdiv",
103 "Number of vertical divisions", NULL},
104 {SR_CONF_SPL_WEIGHT_FREQ, SR_T_STRING, "spl_weight_freq",
105 "Sound pressure level frequency weighting", NULL},
106 {SR_CONF_SPL_WEIGHT_TIME, SR_T_STRING, "spl_weight_time",
107 "Sound pressure level time weighting", NULL},
108 {SR_CONF_SPL_MEASUREMENT_RANGE, SR_T_UINT64_RANGE, "spl_meas_range",
109 "Sound pressure level measurement range", NULL},
110 {SR_CONF_HOLD_MAX, SR_T_BOOL, "hold_max",
112 {SR_CONF_HOLD_MIN, SR_T_BOOL, "hold_min",
114 {SR_CONF_VOLTAGE_THRESHOLD, SR_T_DOUBLE_RANGE, "voltage_threshold",
115 "Voltage threshold", NULL },
116 {SR_CONF_EXTERNAL_CLOCK, SR_T_BOOL, "external_clock",
117 "External clock mode", NULL},
118 {SR_CONF_SWAP, SR_T_BOOL, "swap",
119 "Swap channel order", NULL},
120 {SR_CONF_CENTER_FREQUENCY, SR_T_UINT64, "center_frequency",
121 "Center frequency", NULL},
122 {SR_CONF_NUM_LOGIC_CHANNELS, SR_T_INT32, "logic_channels",
123 "Number of logic channels", NULL},
124 {SR_CONF_NUM_ANALOG_CHANNELS, SR_T_INT32, "analog_channels",
125 "Number of analog channels", NULL},
126 {SR_CONF_OUTPUT_VOLTAGE, SR_T_FLOAT, "output_voltage",
127 "Current output voltage", NULL},
128 {SR_CONF_OUTPUT_VOLTAGE_TARGET, SR_T_FLOAT, "output_voltage_target",
129 "Output voltage target", NULL},
130 {SR_CONF_OUTPUT_CURRENT, SR_T_FLOAT, "output_current",
131 "Current output current", NULL},
132 {SR_CONF_OUTPUT_CURRENT_LIMIT, SR_T_FLOAT, "output_current_limit",
133 "Output current limit", NULL},
134 {SR_CONF_OUTPUT_ENABLED, SR_T_BOOL, "output_enabled",
135 "Output enabled", NULL},
136 {SR_CONF_OUTPUT_CHANNEL_CONFIG, SR_T_STRING, "output_channel_config",
137 "Output channel modes", NULL},
138 {SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED, SR_T_BOOL, "ovp_enabled",
139 "Over-voltage protection enabled", NULL},
140 {SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE, SR_T_BOOL, "ovp_active",
141 "Over-voltage protection active", NULL},
142 {SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD, SR_T_FLOAT, "ovp_threshold",
143 "Over-voltage protection threshold", NULL},
144 {SR_CONF_OVER_CURRENT_PROTECTION_ENABLED, SR_T_BOOL, "ocp_enabled",
145 "Over-current protection enabled", NULL},
146 {SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE, SR_T_BOOL, "ocp_active",
147 "Over-current protection active", NULL},
148 {SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD, SR_T_FLOAT, "ocp_threshold",
149 "Over-current protection threshold", NULL},
150 {SR_CONF_CLOCK_EDGE, SR_T_STRING, "clock_edge",
152 {SR_CONF_AMPLITUDE, SR_T_FLOAT, "amplitude",
154 {SR_CONF_OUTPUT_REGULATION, SR_T_STRING, "output_regulation",
155 "Output channel regulation", NULL},
156 {SR_CONF_OVER_TEMPERATURE_PROTECTION, SR_T_BOOL, "otp",
157 "Over-temperature protection", NULL},
158 {SR_CONF_OUTPUT_FREQUENCY, SR_T_UINT64, "output_frequency",
159 "Output frequency", NULL},
160 {SR_CONF_MEASURED_QUANTITY, SR_T_STRING, "measured_quantity",
161 "Measured quantity", NULL},
162 {SR_CONF_MEASURED_2ND_QUANTITY, SR_T_STRING, "measured_2nd_quantity",
163 "Measured secondary quantity", NULL},
164 {SR_CONF_EQUIV_CIRCUIT_MODEL, SR_T_STRING, "equiv_circuit_model",
165 "Equivalent circuit model", NULL},
168 {SR_CONF_SCAN_OPTIONS, SR_T_STRING, "scan_options",
169 "Scan options", NULL},
170 {SR_CONF_DEVICE_OPTIONS, SR_T_STRING, "device_options",
171 "Device options", NULL},
172 {SR_CONF_SESSIONFILE, SR_T_STRING, "sessionfile",
173 "Session file", NULL},
174 {SR_CONF_CAPTUREFILE, SR_T_STRING, "capturefile",
175 "Capture file", NULL},
176 {SR_CONF_CAPTURE_UNITSIZE, SR_T_UINT64, "capture_unitsize",
177 "Capture unitsize", NULL},
178 {SR_CONF_POWER_OFF, SR_T_BOOL, "power_off",
180 {SR_CONF_DATA_SOURCE, SR_T_STRING, "data_source",
181 "Data source", NULL},
183 /* Acquisition modes, sample limiting */
184 {SR_CONF_LIMIT_MSEC, SR_T_UINT64, "limit_time",
186 {SR_CONF_LIMIT_SAMPLES, SR_T_UINT64, "limit_samples",
187 "Sample limit", NULL},
188 {SR_CONF_LIMIT_FRAMES, SR_T_UINT64, "limit_frames",
189 "Frame limit", NULL},
190 {SR_CONF_CONTINUOUS, SR_T_UINT64, "continuous",
191 "Continuous sampling", NULL},
192 {SR_CONF_DATALOG, SR_T_BOOL, "datalog",
194 {SR_CONF_DEVICE_MODE, SR_T_STRING, "device_mode",
195 "Device mode", NULL},
196 {SR_CONF_TEST_MODE, SR_T_STRING, "test_mode",
199 {0, 0, NULL, NULL, NULL},
202 SR_PRIV const GVariantType *sr_variant_type_get(int datatype)
206 return G_VARIANT_TYPE_INT32;
208 return G_VARIANT_TYPE_UINT64;
210 return G_VARIANT_TYPE_STRING;
212 return G_VARIANT_TYPE_BOOLEAN;
214 return G_VARIANT_TYPE_DOUBLE;
215 case SR_T_RATIONAL_PERIOD:
216 case SR_T_RATIONAL_VOLT:
217 case SR_T_UINT64_RANGE:
218 case SR_T_DOUBLE_RANGE:
219 return G_VARIANT_TYPE_TUPLE;
221 return G_VARIANT_TYPE_DICTIONARY;
227 SR_PRIV int sr_variant_type_check(uint32_t key, GVariant *value)
229 const struct sr_config_info *info;
230 const GVariantType *type, *expected;
231 char *expected_string, *type_string;
233 info = sr_config_info_get(key);
237 expected = sr_variant_type_get(info->datatype);
238 type = g_variant_get_type(value);
239 if (!g_variant_type_equal(type, expected)
240 && !g_variant_type_is_subtype_of(type, expected)) {
241 expected_string = g_variant_type_dup_string(expected);
242 type_string = g_variant_type_dup_string(type);
243 sr_err("Wrong variant type for key '%s': expected '%s', got '%s'",
244 info->name, expected_string, type_string);
245 g_free(expected_string);
254 * Return the list of supported hardware drivers.
256 * @return Pointer to the NULL-terminated list of hardware driver pointers.
260 SR_API struct sr_dev_driver **sr_driver_list(void)
267 * Initialize a hardware driver.
269 * This usually involves memory allocations and variable initializations
270 * within the driver, but _not_ scanning for attached devices.
271 * The API call sr_driver_scan() is used for that.
273 * @param ctx A libsigrok context object allocated by a previous call to
274 * sr_init(). Must not be NULL.
275 * @param driver The driver to initialize. This must be a pointer to one of
276 * the entries returned by sr_driver_list(). Must not be NULL.
278 * @retval SR_OK Success
279 * @retval SR_ERR_ARG Invalid parameter(s).
280 * @retval SR_ERR_BUG Internal errors.
281 * @retval other Another negative error code upon other errors.
285 SR_API int sr_driver_init(struct sr_context *ctx, struct sr_dev_driver *driver)
290 sr_err("Invalid libsigrok context, can't initialize.");
295 sr_err("Invalid driver, can't initialize.");
299 sr_spew("Initializing driver '%s'.", driver->name);
300 if ((ret = driver->init(ctx)) < 0)
301 sr_err("Failed to initialize the driver: %d.", ret);
306 static int check_options(struct sr_dev_driver *driver, GSList *options,
307 uint32_t optlist_key, struct sr_dev_inst *sdi,
308 struct sr_channel_group *cg)
310 struct sr_config *src;
311 const struct sr_config_info *srci;
314 const uint32_t *opts;
318 if (sr_config_list(driver, sdi, cg, optlist_key, &gvar_opts) != SR_OK) {
319 /* Driver publishes no options for this optlist. */
324 opts = g_variant_get_fixed_array(gvar_opts, &num_opts, sizeof(uint32_t));
325 for (l = options; l; l = l->next) {
327 for (i = 0; i < num_opts; i++) {
328 if (opts[i] == src->key)
332 if (!(srci = sr_config_info_get(src->key)))
333 /* Shouldn't happen. */
334 sr_err("Invalid option %d.", src->key);
336 sr_err("Invalid option '%s'.", srci->id);
340 if (sr_variant_type_check(src->key, src->data) != SR_OK) {
345 g_variant_unref(gvar_opts);
351 * Tell a hardware driver to scan for devices.
353 * In addition to the detection, the devices that are found are also
354 * initialized automatically. On some devices, this involves a firmware upload,
355 * or other such measures.
357 * The order in which the system is scanned for devices is not specified. The
358 * caller should not assume or rely on any specific order.
360 * Before calling sr_driver_scan(), the user must have previously initialized
361 * the driver by calling sr_driver_init().
363 * @param driver The driver that should scan. This must be a pointer to one of
364 * the entries returned by sr_driver_list(). Must not be NULL.
365 * @param options A list of 'struct sr_hwopt' options to pass to the driver's
366 * scanner. Can be NULL/empty.
368 * @return A GSList * of 'struct sr_dev_inst', or NULL if no devices were
369 * found (or errors were encountered). This list must be freed by the
370 * caller using g_slist_free(), but without freeing the data pointed
375 SR_API GSList *sr_driver_scan(struct sr_dev_driver *driver, GSList *options)
380 sr_err("Invalid driver, can't scan for devices.");
385 sr_err("Driver not initialized, can't scan for devices.");
390 if (check_options(driver, options, SR_CONF_SCAN_OPTIONS, NULL, NULL) != SR_OK)
394 l = driver->scan(options);
396 sr_spew("Scan of '%s' found %d devices.", driver->name,
402 /** Call driver cleanup function for all drivers.
404 SR_PRIV void sr_hw_cleanup_all(void)
407 struct sr_dev_driver **drivers;
409 drivers = sr_driver_list();
410 for (i = 0; drivers[i]; i++) {
411 if (drivers[i]->cleanup)
412 drivers[i]->cleanup();
416 /** Allocate struct sr_config.
417 * A floating reference can be passed in for data.
420 SR_PRIV struct sr_config *sr_config_new(uint32_t key, GVariant *data)
422 struct sr_config *src;
424 src = g_malloc0(sizeof(struct sr_config));
426 src->data = g_variant_ref_sink(data);
431 /** Free struct sr_config.
434 SR_PRIV void sr_config_free(struct sr_config *src)
437 if (!src || !src->data) {
438 sr_err("%s: invalid data!", __func__);
442 g_variant_unref(src->data);
447 static int check_key(const struct sr_dev_driver *driver,
448 const struct sr_dev_inst *sdi, const struct sr_channel_group *cg,
449 uint32_t key, int op)
451 const struct sr_config_info *srci;
454 const uint32_t *opts;
456 char *suffix, *opstr;
459 suffix = " for this device and channel group";
461 suffix = " for this device";
465 if (!(srci = sr_config_info_get(key))) {
466 sr_err("Invalid key %d.", key);
469 opstr = op == SR_CONF_GET ? "get" : op == SR_CONF_SET ? "set" : "list";
470 sr_spew("sr_config_%s(): key %d (%s) sdi %p cg %s", opstr, key,
471 srci->id, sdi, cg ? cg->name : "NULL");
473 if (sr_config_list(driver, sdi, cg, SR_CONF_DEVICE_OPTIONS, &gvar_opts) != SR_OK) {
474 /* Driver publishes no options. */
475 sr_err("No options available%s.", srci->id, suffix);
478 opts = g_variant_get_fixed_array(gvar_opts, &num_opts, sizeof(uint32_t));
480 for (i = 0; i < num_opts; i++) {
481 if ((opts[i] & SR_CONF_MASK) == key) {
486 g_variant_unref(gvar_opts);
488 sr_err("Option '%s' not available%s.", srci->id, suffix);
492 if (!(pub_opt & op)) {
493 sr_err("Option '%s' not available to %s%s.", srci->id, opstr, suffix);
501 * Query value of a configuration key at the given driver or device instance.
503 * @param[in] driver The sr_dev_driver struct to query.
504 * @param[in] sdi (optional) If the key is specific to a device, this must
505 * contain a pointer to the struct sr_dev_inst to be checked.
506 * Otherwise it must be NULL.
507 * @param[in] cg The channel group on the device for which to list the
509 * @param[in] key The configuration key (SR_CONF_*).
510 * @param[in,out] data Pointer to a GVariant where the value will be stored.
511 * Must not be NULL. The caller is given ownership of the GVariant
512 * and must thus decrease the refcount after use. However if
513 * this function returns an error code, the field should be
514 * considered unused, and should not be unreferenced.
516 * @retval SR_OK Success.
517 * @retval SR_ERR Error.
518 * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
519 * interpreted as an error by the caller; merely as an indication
520 * that it's not applicable.
524 SR_API int sr_config_get(const struct sr_dev_driver *driver,
525 const struct sr_dev_inst *sdi,
526 const struct sr_channel_group *cg,
527 uint32_t key, GVariant **data)
531 if (!driver || !data)
534 if (!driver->config_get)
537 if (check_key(driver, sdi, cg, key, SR_CONF_GET) != SR_OK)
540 if ((ret = driver->config_get(key, data, sdi, cg)) == SR_OK) {
541 /* Got a floating reference from the driver. Sink it here,
542 * caller will need to unref when done with it. */
543 g_variant_ref_sink(*data);
550 * Set value of a configuration key in a device instance.
552 * @param[in] sdi The device instance.
553 * @param[in] cg The channel group on the device for which to list the
555 * @param[in] key The configuration key (SR_CONF_*).
556 * @param data The new value for the key, as a GVariant with GVariantType
557 * appropriate to that key. A floating reference can be passed
558 * in; its refcount will be sunk and unreferenced after use.
560 * @retval SR_OK Success.
561 * @retval SR_ERR Error.
562 * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
563 * interpreted as an error by the caller; merely as an indication
564 * that it's not applicable.
568 SR_API int sr_config_set(const struct sr_dev_inst *sdi,
569 const struct sr_channel_group *cg,
570 uint32_t key, GVariant *data)
574 g_variant_ref_sink(data);
576 if (!sdi || !sdi->driver || !data)
578 else if (!sdi->driver->config_set)
580 else if (check_key(sdi->driver, sdi, cg, key, SR_CONF_SET) != SR_OK)
582 else if ((ret = sr_variant_type_check(key, data)) == SR_OK)
583 ret = sdi->driver->config_set(key, data, sdi, cg);
585 g_variant_unref(data);
591 * Apply configuration settings to the device hardware.
593 * @param sdi The device instance.
595 * @return SR_OK upon success or SR_ERR in case of error.
599 SR_API int sr_config_commit(const struct sr_dev_inst *sdi)
603 if (!sdi || !sdi->driver)
605 else if (!sdi->driver->config_commit)
608 ret = sdi->driver->config_commit(sdi);
614 * List all possible values for a configuration key.
616 * @param[in] driver The sr_dev_driver struct to query.
617 * @param[in] sdi (optional) If the key is specific to a device, this must
618 * contain a pointer to the struct sr_dev_inst to be checked.
619 * @param[in] cg The channel group on the device for which to list the
621 * @param[in] key The configuration key (SR_CONF_*).
622 * @param[in,out] data A pointer to a GVariant where the list will be stored.
623 * The caller is given ownership of the GVariant and must thus
624 * unref the GVariant after use. However if this function
625 * returns an error code, the field should be considered
626 * unused, and should not be unreferenced.
628 * @retval SR_OK Success.
629 * @retval SR_ERR Error.
630 * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be
631 * interpreted as an error by the caller; merely as an indication
632 * that it's not applicable.
636 SR_API int sr_config_list(const struct sr_dev_driver *driver,
637 const struct sr_dev_inst *sdi,
638 const struct sr_channel_group *cg,
639 uint32_t key, GVariant **data)
643 if (!driver || !data)
645 else if (!driver->config_list)
647 else if (key != SR_CONF_SCAN_OPTIONS && key != SR_CONF_DEVICE_OPTIONS) {
648 if (check_key(driver, sdi, cg, key, SR_CONF_LIST) != SR_OK)
651 if ((ret = driver->config_list(key, data, sdi, cg)) == SR_OK)
652 g_variant_ref_sink(*data);
658 * Get information about a configuration key, by key.
660 * @param[in] key The configuration key.
662 * @return A pointer to a struct sr_config_info, or NULL if the key
667 SR_API const struct sr_config_info *sr_config_info_get(uint32_t key)
671 for (i = 0; sr_config_info_data[i].key; i++) {
672 if (sr_config_info_data[i].key == key)
673 return &sr_config_info_data[i];
680 * Get information about a configuration key, by name.
682 * @param[in] optname The configuration key.
684 * @return A pointer to a struct sr_config_info, or NULL if the key
689 SR_API const struct sr_config_info *sr_config_info_name_get(const char *optname)
693 for (i = 0; sr_config_info_data[i].key; i++) {
694 if (!sr_config_info_data[i].id)
696 if (!strcmp(sr_config_info_data[i].id, optname))
697 return &sr_config_info_data[i];