2 * This file is part of the libsigrok project.
4 * Copyright (C) 2014 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
25 * The default serial communication settings on the device are 9600
26 * baud, 9 data bits. The 9th bit isn't actually used, and the vendor
27 * software uses Mark parity to absorb the extra bit.
29 * Since 9 data bits is not a standard available in POSIX, we use two
30 * stop bits to skip over the extra bit instead.
32 #define SERIALCOMM "9600/8n2"
34 static const uint32_t scanopts[] = {
39 static const uint32_t drvopts[] = {
43 static const uint32_t devopts[] = {
45 SR_CONF_CHANNEL_CONFIG | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
46 SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET,
49 static const uint32_t devopts_cg[] = {
50 SR_CONF_VOLTAGE | SR_CONF_GET,
51 SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
52 SR_CONF_CURRENT | SR_CONF_GET,
53 SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST,
54 SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET,
57 static const char *channel_modes[] = {
63 static const struct pps_model models[] = {
64 { PPS_3203T_3S, "PPS3203T-3S",
65 CHANMODE_INDEPENDENT | CHANMODE_SERIES | CHANMODE_PARALLEL,
69 { { 0, 32, 0.01 }, { 0, 3, 0.001 } },
71 { { 0, 32, 0.01 }, { 0, 3, 0.001 } },
73 { { 0, 6, 0.01 }, { 0, 3, 0.001 } },
78 static GSList *scan(struct sr_dev_driver *di, GSList *options, int modelid)
80 struct sr_dev_inst *sdi;
81 struct drv_context *drvc;
82 struct dev_context *devc;
83 struct sr_config *src;
84 struct sr_channel *ch;
85 struct sr_channel_group *cg;
86 struct sr_serial_dev_inst *serial;
88 const struct pps_model *model;
89 uint8_t packet[PACKET_SIZE];
92 const char *conn, *serialcomm;
98 conn = serialcomm = NULL;
99 for (l = options; l; l = l->next) {
103 conn = g_variant_get_string(src->data, NULL);
105 case SR_CONF_SERIALCOMM:
106 serialcomm = g_variant_get_string(src->data, NULL);
113 serialcomm = SERIALCOMM;
115 serial = sr_serial_dev_inst_new(conn, serialcomm);
117 if (serial_open(serial, SERIAL_RDWR) != SR_OK)
120 serial_flush(serial);
122 /* This is how the vendor software scans for hardware. */
123 memset(packet, 0, PACKET_SIZE);
126 delay_ms = serial_timeout(serial, PACKET_SIZE);
127 if (serial_write_blocking(serial, packet, PACKET_SIZE, delay_ms) < PACKET_SIZE) {
128 sr_err("Unable to write while probing for hardware.");
131 /* The device responds with a 24-byte packet when it receives a packet.
132 * At 9600 baud, 300ms is long enough for it to have arrived. */
133 g_usleep(300 * 1000);
134 memset(packet, 0, PACKET_SIZE);
135 if ((ret = serial_read_nonblocking(serial, packet, PACKET_SIZE)) < 0) {
136 sr_err("Unable to read while probing for hardware: %s",
140 if (ret != PACKET_SIZE || packet[0] != 0xaa || packet[1] != 0xaa) {
141 /* Doesn't look like an Atten PPS. */
146 for (i = 0; i < ARRAY_SIZE(models); i++) {
147 if (models[i].modelid == modelid) {
153 sr_err("Unknown modelid %d", modelid);
157 sdi = g_malloc0(sizeof(struct sr_dev_inst));
158 sdi->status = SR_ST_INACTIVE;
159 sdi->vendor = g_strdup("Atten");
160 sdi->model = g_strdup(model->name);
161 sdi->inst_type = SR_INST_SERIAL;
163 for (i = 0; i < MAX_CHANNELS; i++) {
164 snprintf(channel, 10, "CH%d", i + 1);
165 ch = sr_channel_new(sdi, i, SR_CHANNEL_ANALOG, TRUE, channel);
166 cg = g_malloc(sizeof(struct sr_channel_group));
167 cg->name = g_strdup(channel);
168 cg->channels = g_slist_append(NULL, ch);
170 sdi->channel_groups = g_slist_append(sdi->channel_groups, cg);
173 devc = g_malloc0(sizeof(struct dev_context));
175 devc->config = g_malloc0(sizeof(struct per_channel_config) * model->num_channels);
176 devc->delay_ms = delay_ms;
178 devices = g_slist_append(devices, sdi);
180 serial_close(serial);
182 sr_serial_dev_inst_free(serial);
184 return std_scan_complete(di, devices);
187 static GSList *scan_3203(struct sr_dev_driver *di, GSList *options)
189 return scan(di, options, PPS_3203T_3S);
192 static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
193 const struct sr_channel_group *cg)
195 struct dev_context *devc;
196 struct sr_channel *ch;
206 /* No channel group: global options. */
208 case SR_CONF_CHANNEL_CONFIG:
209 *data = g_variant_new_string(channel_modes[devc->channel_mode]);
211 case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
212 *data = g_variant_new_boolean(devc->over_current_protection);
218 /* We only ever have one channel per channel group in this driver. */
219 ch = cg->channels->data;
223 case SR_CONF_VOLTAGE:
224 *data = g_variant_new_double(devc->config[channel].output_voltage_last);
226 case SR_CONF_VOLTAGE_TARGET:
227 *data = g_variant_new_double(devc->config[channel].output_voltage_max);
229 case SR_CONF_CURRENT:
230 *data = g_variant_new_double(devc->config[channel].output_current_last);
232 case SR_CONF_CURRENT_LIMIT:
233 *data = g_variant_new_double(devc->config[channel].output_current_max);
235 case SR_CONF_ENABLED:
236 *data = g_variant_new_boolean(devc->config[channel].output_enabled);
246 static int find_str(const char *str, const char **strings, int array_size)
251 for (i = 0; i < array_size; i++) {
252 if (!strcmp(str, strings[i])) {
261 static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
262 const struct sr_channel_group *cg)
264 struct dev_context *devc;
265 struct sr_channel *ch;
267 int channel, ret, ival;
271 if (sdi->status != SR_ST_ACTIVE)
272 return SR_ERR_DEV_CLOSED;
277 /* No channel group: global options. */
279 case SR_CONF_CHANNEL_CONFIG:
280 sval = g_variant_get_string(data, NULL);
281 if ((ival = find_str(sval, channel_modes,
282 ARRAY_SIZE(channel_modes))) == -1) {
286 if (devc->model->channel_modes && (1 << ival) == 0) {
287 /* Not supported on this model. */
290 if (ival == devc->channel_mode_set)
293 devc->channel_mode_set = ival;
294 devc->config_dirty = TRUE;
296 case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
297 bval = g_variant_get_boolean(data);
298 if (bval == devc->over_current_protection_set)
301 devc->over_current_protection_set = bval;
302 devc->config_dirty = TRUE;
308 /* Channel group specified: per-channel options. */
309 /* We only ever have one channel per channel group in this driver. */
310 ch = cg->channels->data;
314 case SR_CONF_VOLTAGE_TARGET:
315 dval = g_variant_get_double(data);
316 if (dval < 0 || dval > devc->model->channels[channel].voltage[1])
318 devc->config[channel].output_voltage_max = dval;
319 devc->config_dirty = TRUE;
321 case SR_CONF_CURRENT_LIMIT:
322 dval = g_variant_get_double(data);
323 if (dval < 0 || dval > devc->model->channels[channel].current[1])
325 devc->config[channel].output_current_max = dval;
326 devc->config_dirty = TRUE;
328 case SR_CONF_ENABLED:
329 bval = g_variant_get_boolean(data);
330 if (bval == devc->config[channel].output_enabled_set)
333 devc->config[channel].output_enabled_set = bval;
334 devc->config_dirty = TRUE;
344 static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
345 const struct sr_channel_group *cg)
347 struct dev_context *devc;
348 struct sr_channel *ch;
353 /* Always available. */
354 if (key == SR_CONF_SCAN_OPTIONS) {
355 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
356 scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
360 if (key == SR_CONF_DEVICE_OPTIONS && !sdi) {
361 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
362 drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t));
372 /* No channel group: global options. */
374 case SR_CONF_DEVICE_OPTIONS:
375 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
376 devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
378 case SR_CONF_CHANNEL_CONFIG:
379 if (devc->model->channel_modes == CHANMODE_INDEPENDENT) {
380 /* The 1-channel models. */
381 *data = g_variant_new_strv(channel_modes, 1);
383 /* The other models support all modes. */
384 *data = g_variant_new_strv(channel_modes, ARRAY_SIZE(channel_modes));
391 /* Channel group specified: per-channel options. */
394 /* We only ever have one channel per channel group in this driver. */
395 ch = cg->channels->data;
399 case SR_CONF_DEVICE_OPTIONS:
400 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
401 devopts_cg, ARRAY_SIZE(devopts_cg), sizeof(uint32_t));
403 case SR_CONF_VOLTAGE_TARGET:
404 g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
405 /* Min, max, step. */
406 for (i = 0; i < 3; i++) {
407 gvar = g_variant_new_double(devc->model->channels[channel].voltage[i]);
408 g_variant_builder_add_value(&gvb, gvar);
410 *data = g_variant_builder_end(&gvb);
412 case SR_CONF_CURRENT_LIMIT:
413 g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
414 /* Min, max, step. */
415 for (i = 0; i < 3; i++) {
416 gvar = g_variant_new_double(devc->model->channels[channel].current[i]);
417 g_variant_builder_add_value(&gvb, gvar);
419 *data = g_variant_builder_end(&gvb);
429 static int dev_close(struct sr_dev_inst *sdi)
431 struct dev_context *devc;
434 if (devc->config_dirty)
435 /* Some configuration changes were queued up but didn't
436 * get sent to the device, likely because we were never
437 * in acquisition mode. Send them out now. */
440 return std_serial_dev_close(sdi);
443 static int dev_acquisition_start(const struct sr_dev_inst *sdi)
445 struct dev_context *devc;
446 struct sr_serial_dev_inst *serial;
447 uint8_t packet[PACKET_SIZE];
449 if (sdi->status != SR_ST_ACTIVE)
450 return SR_ERR_DEV_CLOSED;
453 memset(devc->packet, 0x44, PACKET_SIZE);
454 devc->packet_size = 0;
456 devc->acquisition_running = TRUE;
459 serial_source_add(sdi->session, serial, G_IO_IN, 50,
460 atten_pps3xxx_receive_data, (void *)sdi);
461 std_session_send_df_header(sdi, LOG_PREFIX);
463 /* Send a "channel" configuration packet now. */
464 memset(packet, 0, PACKET_SIZE);
467 send_packet(sdi, packet);
472 static int dev_acquisition_stop(struct sr_dev_inst *sdi)
474 struct dev_context *devc;
476 if (sdi->status != SR_ST_ACTIVE)
477 return SR_ERR_DEV_CLOSED;
480 devc->acquisition_running = FALSE;
485 static struct sr_dev_driver atten_pps3203_driver_info = {
486 .name = "atten-pps3203",
487 .longname = "Atten PPS3203T-3S",
490 .cleanup = std_cleanup,
492 .dev_list = std_dev_list,
494 .config_get = config_get,
495 .config_set = config_set,
496 .config_list = config_list,
497 .dev_open = std_serial_dev_open,
498 .dev_close = dev_close,
499 .dev_acquisition_start = dev_acquisition_start,
500 .dev_acquisition_stop = dev_acquisition_stop,
503 SR_REGISTER_DEV_DRIVER(atten_pps3203_driver_info);