2 * This file is part of the sigrok-firmware-fx2lafw project.
4 * Copyright (C) 2009 Ubixum, Inc.
5 * Copyright (C) 2015 Jochen Hoenicke
7 * This library is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU Lesser General Public
9 * License as published by the Free Software Foundation; either
10 * version 2.1 of the License, or (at your option) any later version.
12 * This library is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * Lesser General Public License for more details.
17 * You should have received a copy of the GNU Lesser General Public
18 * License along with this library; if not, see <http://www.gnu.org/licenses/>.
21 #include <fx2macros.h>
23 #include <autovector.h>
27 /* Change to support as many interfaces as you need. */
28 static BYTE altiface = 0;
30 static volatile __bit dosud = FALSE;
31 static volatile __bit dosuspend = FALSE;
33 extern __code BYTE highspd_dscr;
34 extern __code BYTE fullspd_dscr;
36 void resume_isr(void) __interrupt RESUME_ISR
41 void sudav_isr(void) __interrupt SUDAV_ISR
47 void usbreset_isr(void) __interrupt USBRESET_ISR
49 handle_hispeed(FALSE);
53 void hispeed_isr(void) __interrupt HISPEED_ISR
59 void suspend_isr(void) __interrupt SUSPEND_ISR
65 void timer2_isr(void) __interrupt TF2_ISR
67 /* Toggle the 1kHz pin, only accurate up to ca 8MHz */
73 * The gain stage is 2 stage approach. -6dB and -20dB on the first stage (attentuator). The second stage is then doing the gain by 3 different resistor values switched into the feedback loop.
75 * PC1=1; PC2=0; PC3= 0 -> Gain x0.1 = -20dB
76 * PC1=1; PC2=0; PC3= 1 -> Gain x0.2 = -14dB
77 * PC1=1; PC2=1; PC3= 0 -> Gain x0.4 = -8dB
78 * PC1=0; PC2=0; PC3= 0 -> Gain x0.5 = -6dB
79 * PC1=0; PC2=0; PC3= 1 -> Gain x1 = 0dB
80 * PC1=0; PC2=1; PC3= 0 -> Gain x2 = +6dB
82 * PE1=1; PC4=0; PC5= 0 -> Gain x0.1 = -20dB
83 * PE1=1; PC4=0; PC5= 1 -> Gain x0.2 = -14dB
84 * PE1=1; PC4=1; PC5= 0 -> Gain x0.4 = -8dB
85 * PE1=0; PC4=0; PC5= 0 -> Gain x0.5 = -6dB
86 * PE1=0; PC4=0; PC5= 1 -> Gain x1 = 0dB
87 * PE1=0; PC4=1; PC5= 0 -> Gain x2 = +6dB
89 static BOOL set_voltage(BYTE channel, BYTE val)
91 BYTE bits_C, bit_E, mask_C, mask_E;
116 } else if (channel == 1) {
146 IOC = (IOC & ~mask_C) | (bits_C & mask_C);
147 IOE = (IOE & ~mask_E) | (bit_E & mask_E);
154 * Each LSB in the nibble of the byte controls the coupling per channel.
156 * Setting PE3 disables AC coupling capacitor on CH0.
157 * Setting PE0 disables AC coupling capacitor on CH1.
159 static void set_coupling(BYTE coupling_cfg)
161 if (coupling_cfg & 0x01)
166 if (coupling_cfg & 0x10)
172 static BOOL set_numchannels(BYTE numchannels)
174 if (numchannels == 1 || numchannels == 2) {
175 BYTE fifocfg = 7 + numchannels;
176 EP2FIFOCFG = fifocfg;
177 EP6FIFOCFG = fifocfg;
184 static void clear_fifo(void)
197 static void stop_sampling(void)
201 INPKTEND = (altiface == 0) ? 6 : 2;
204 static void start_sampling(void)
210 for (i = 0; i < 1000; i++);
212 while (!(GPIFTRIG & 0x80))
219 GPIFTRIG = (altiface == 0) ? 6 : 4;
223 static void select_interface(BYTE alt)
225 const BYTE *pPacketSize = \
226 ((USBCS & bmHSM) ? &highspd_dscr : &fullspd_dscr)
227 + (9 + (16 * alt) + 9 + 4);
236 EP6AUTOINLENL = pPacketSize[0];
237 EP6AUTOINLENH = pPacketSize[1];
243 EP2AUTOINLENL = pPacketSize[0];
244 EP2AUTOINLENH = pPacketSize[1] & 0x7;
245 EP2ISOINPKTS = (pPacketSize[1] >> 3) + 1;
249 static const struct samplerate_info {
258 { 48, 0x80, 0, 3, 0, 0x00, 0xea },
259 { 30, 0x80, 0, 3, 0, 0x00, 0xaa },
260 { 24, 1, 0, 2, 1, 0x40, 0xea },
261 { 16, 1, 1, 2, 0, 0x40, 0xea },
262 { 15, 1, 0, 2, 1, 0x40, 0xaa },
263 { 12, 2, 1, 2, 0, 0x40, 0xea },
264 { 11, 1, 1, 2, 0, 0x40, 0xaa },
265 { 8, 3, 2, 2, 0, 0x40, 0xea },
266 { 6, 2, 2, 2, 0, 0x40, 0xaa },
267 { 5, 3, 2, 2, 0, 0x40, 0xaa },
268 { 4, 6, 5, 2, 0, 0x40, 0xea },
269 { 3, 5, 4, 2, 0, 0x40, 0xaa },
270 { 2, 12, 11, 2, 0, 0x40, 0xea },
271 { 1, 24, 23, 2, 0, 0x40, 0xea },
272 { 50, 48, 47, 2, 0, 0x40, 0xea },
273 { 20, 120, 119, 2, 0, 0x40, 0xea },
274 { 10, 240, 239, 2, 0, 0x40, 0xea },
277 static BOOL set_samplerate(BYTE rate)
281 while (samplerates[i].rate != rate) {
283 if (i == sizeof(samplerates) / sizeof(samplerates[0]))
287 IFCONFIG = samplerates[i].ifcfg;
290 AUTOPTRH2 = 0xE4; /* 0xE400: GPIF waveform descriptor 0. */
294 * The program for low-speed, e.g. 1 MHz, is:
295 * wait 24, CTL2=0, FIFO
299 * The program for 24 MHz is:
300 * wait 1, CTL2=0, FIFO
303 * The program for 30/48 MHz is:
304 * jump 0, CTL2=Z, FIFO, LOOP
307 /* LENGTH / BRANCH 0-7 */
308 EXTAUTODAT2 = samplerates[i].wait0;
309 EXTAUTODAT2 = samplerates[i].wait1;
318 EXTAUTODAT2 = samplerates[i].opc0;
319 EXTAUTODAT2 = samplerates[i].opc1;
320 EXTAUTODAT2 = 1; /* DATA=0 DP=1 */
328 EXTAUTODAT2 = samplerates[i].out0;
329 EXTAUTODAT2 = 0x44; /* OE0=1, CTL0=1 */
330 EXTAUTODAT2 = 0x44; /* OE0=1, CTL0=1 */
337 /* LOGIC FUNCTION 0-7 */
347 for (i = 0; i < 96; i++)
353 static BOOL set_calibration_pulse(BYTE fs)
357 RCAP2L = -10000 & 0xff;
358 RCAP2H = (-10000 & 0xff00) >> 8;
361 RCAP2L = -1000 & 0xff;
362 RCAP2H = (-1000 & 0xff00) >> 8;
365 RCAP2L = (BYTE)(-100 & 0xff);
369 RCAP2L = (BYTE)(-20 & 0xff);
377 /* Set *alt_ifc to the current alt interface for ifc. */
378 BOOL handle_get_interface(BYTE ifc, BYTE *alt_ifc)
388 * Return TRUE if you set the interface requested.
390 * Note: This function should reconfigure and reset the endpoints
391 * according to the interface descriptors you provided.
393 BOOL handle_set_interface(BYTE ifc,BYTE alt_ifc)
396 select_interface(alt_ifc);
401 BYTE handle_get_configuration(void)
403 /* We only support configuration 0. */
407 BOOL handle_set_configuration(BYTE cfg)
409 /* We only support configuration 0. */
415 BOOL handle_vendorcommand(BYTE cmd)
419 /* Clear EP0BCH/L for each valid command. */
420 if (cmd >= 0xe0 && cmd <= 0xe6) {
423 while (EP0CS & bmEPBUSY);
429 set_voltage(cmd - 0xe0, EP0BUF[0]);
432 set_samplerate(EP0BUF[0]);
439 set_numchannels(EP0BUF[0]);
442 set_coupling(EP0BUF[0]);
445 set_calibration_pulse(EP0BUF[0]);
449 return FALSE; /* Not handled by handlers. */
452 static void init(void)
457 /* In idle mode tristate all outputs. */
458 GPIFIDLECTL = 0x00; /* Don't enable CTL0-5 outputs. */
459 GPIFCTLCFG = 0x80; /* TRICTL=1. CTL0-2: CMOS outputs, tri-statable. */
461 GPIFREADYSTAT = 0x00;
472 static void main(void)
479 /* Set up interrupts. */
488 /* Global (8051) interrupt enable. */
492 RCAP2L = -1000 & 0xff;
493 RCAP2H = (-1000 & 0xff00) >> 8;
518 /* Make sure ext wakeups are cleared. */
519 WAKEUPCS |= bmWU|bmWU2;
531 } while (!remote_wakeup_allowed && REMOTE_WAKEUP());
533 /* Resume (TRM 6.4). */
534 if (REMOTE_WAKEUP()) {
536 USBCS |= bmSIGRESUME;
538 USBCS &= ~bmSIGRESUME;