1 -------------------------------------------------------------------------------
3 -------------------------------------------------------------------------------
5 This is a capture of data output to a LED universe of 50 RGB LEDs.
7 Every universe at full capacity has a frame size of 768 bytes and can clock
8 out at roughly 100 frames per second.
11 - Koen Kooi's evil vendor tree: https://github.com/koenkooi/kernel
12 - PRU WS28xx firmware: https://github.com/mranostay/ws28xx-lighting-pru
13 - WS2801 datasheet: http://www.adafruit.com/datasheets/WS2801.pdf
16 WS2801 protocol overview
17 ------------------------
19 Each LED receives and then stores the first 24-bits of RGB ordered data then
20 passes any more out the Data Output pin to the next LED in the chain.
22 There is no CS line but latching is done when CLK is held low for >500 uS.
24 This functions as a "reverse" shift register and allows the strip length not
25 to be defined in the protocol.
31 The logic analyzer used was a Saleae Logic16 (at 5MHz):
33 Probe WS2801 LED strip
34 ----------------------------
42 The data contains various RGB values and frames.
44 The sigrok command line used was:
46 sigrok-cli --driver saleae-logic16 --samples 10M --config samplerate=5mhz \
47 -p 0=UNI1,1=CLK -o ws2801_2ch_5mhz.sr