2 * This file is part of the libsigrok project.
4 * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
22 #define VENDOR_NAME "ZEROPLUS"
23 #define USB_INTERFACE 0
24 #define USB_CONFIGURATION 1
25 #define NUM_TRIGGER_STAGES 4
26 #define TRIGGER_TYPE "01"
27 #define PACKET_SIZE 2048 /* ?? */
29 //#define ZP_EXPERIMENTAL
35 unsigned int channels;
36 unsigned int sample_depth; /* In Ksamples/channel */
37 unsigned int max_sampling_freq;
41 * Note -- 16032, 16064 and 16128 *usually* -- but not always -- have the
42 * same 128K sample depth.
44 static const struct zp_model zeroplus_models[] = {
45 {0x0c12, 0x7002, "LAP-16128U", 16, 128, 200},
46 {0x0c12, 0x7009, "LAP-C(16064)", 16, 64, 100},
47 {0x0c12, 0x700a, "LAP-C(16128)", 16, 128, 200},
48 /* TODO: We don't know anything about these.
49 {0x0c12, 0x700b, "LAP-C(32128)", 32, 128, 200},
50 {0x0c12, 0x700c, "LAP-C(321000)", 32, 1024, 200},
51 {0x0c12, 0x700d, "LAP-C(322000)", 32, 2048, 200},
53 {0x0c12, 0x700e, "LAP-C(16032)", 16, 32, 100},
54 {0x0c12, 0x7016, "LAP-C(162000)", 16, 2048, 200},
58 static const int32_t hwcaps[] = {
59 SR_CONF_LOGIC_ANALYZER,
61 SR_CONF_CAPTURE_RATIO,
62 SR_CONF_LIMIT_SAMPLES,
66 * ZEROPLUS LAP-C (16032) numbers the 16 probes A0-A7 and B0-B7.
67 * We currently ignore other untested/unsupported devices here.
69 static const char *probe_names[] = {
70 "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7",
71 "B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7",
75 SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info;
76 static struct sr_dev_driver *di = &zeroplus_logic_cube_driver_info;
79 * The hardware supports more samplerates than these, but these are the
80 * options hardcoded into the vendor's Windows GUI.
83 static const uint64_t samplerates_100[] = {
102 const uint64_t samplerates_200[] = {
123 static int dev_close(struct sr_dev_inst *sdi);
126 static int configure_probes(const struct sr_dev_inst *sdi)
128 struct dev_context *devc;
129 const struct sr_probe *probe;
131 int probe_bit, stage, i;
134 /* Note: sdi and sdi->priv are non-NULL, the caller checked this. */
137 devc->probe_mask = 0;
138 for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
139 devc->trigger_mask[i] = 0;
140 devc->trigger_value[i] = 0;
144 for (l = sdi->probes; l; l = l->next) {
145 probe = (struct sr_probe *)l->data;
146 if (probe->enabled == FALSE)
148 probe_bit = 1 << (probe->index);
149 devc->probe_mask |= probe_bit;
151 if (probe->trigger) {
153 for (tc = probe->trigger; *tc; tc++) {
154 devc->trigger_mask[stage] |= probe_bit;
156 devc->trigger_value[stage] |= probe_bit;
158 if (stage > NUM_TRIGGER_STAGES)
168 static int configure_probes(const struct sr_dev_inst *sdi)
170 struct dev_context *devc;
172 const struct sr_probe *probe;
176 /* Note: sdi and sdi->priv are non-NULL, the caller checked this. */
179 for (l = sdi->probes; l; l = l->next) {
180 probe = (struct sr_probe *)l->data;
181 if (probe->enabled == FALSE)
184 if ((tc = probe->trigger)) {
194 type = TRIGGER_POSEDGE;
197 type = TRIGGER_NEGEDGE;
200 type = TRIGGER_ANYEDGE;
206 analyzer_add_trigger(probe->index, type);
214 SR_PRIV int zp_set_samplerate(struct dev_context *devc, uint64_t samplerate)
218 for (i = 0; ARRAY_SIZE(samplerates_200); i++)
219 if (samplerate == samplerates_200[i])
222 if (i == ARRAY_SIZE(samplerates_200) || samplerate > devc->max_samplerate) {
223 sr_err("Unsupported samplerate: %" PRIu64 "Hz.", samplerate);
227 sr_info("Setting samplerate to %" PRIu64 "Hz.", samplerate);
229 if (samplerate >= SR_MHZ(1))
230 analyzer_set_freq(samplerate / SR_MHZ(1), FREQ_SCALE_MHZ);
231 else if (samplerate >= SR_KHZ(1))
232 analyzer_set_freq(samplerate / SR_KHZ(1), FREQ_SCALE_KHZ);
234 analyzer_set_freq(samplerate, FREQ_SCALE_HZ);
236 devc->cur_samplerate = samplerate;
241 static int dev_clear(void)
243 return std_dev_clear(di, NULL);
246 static int init(struct sr_context *sr_ctx)
248 return std_init(sr_ctx, di, LOG_PREFIX);
251 static GSList *scan(GSList *options)
253 struct sr_dev_inst *sdi;
254 struct sr_probe *probe;
255 struct drv_context *drvc;
256 struct dev_context *devc;
257 const struct zp_model *prof;
258 struct libusb_device_descriptor des;
259 libusb_device **devlist;
261 int ret, devcnt, i, j;
269 /* Find all ZEROPLUS analyzers and add them to device list. */
271 libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); /* TODO: Errors. */
273 for (i = 0; devlist[i]; i++) {
274 ret = libusb_get_device_descriptor(devlist[i], &des);
276 sr_err("Failed to get device descriptor: %s.",
277 libusb_error_name(ret));
282 for (j = 0; j < zeroplus_models[j].vid; j++) {
283 if (des.idVendor == zeroplus_models[j].vid &&
284 des.idProduct == zeroplus_models[j].pid) {
285 prof = &zeroplus_models[j];
288 /* Skip if the device was not found. */
291 sr_info("Found ZEROPLUS %s.", prof->model_name);
293 /* Register the device with libsigrok. */
294 if (!(sdi = sr_dev_inst_new(devcnt, SR_ST_INACTIVE,
295 VENDOR_NAME, prof->model_name, NULL))) {
296 sr_err("%s: sr_dev_inst_new failed", __func__);
301 /* Allocate memory for our private driver context. */
302 if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
303 sr_err("Device context malloc failed.");
309 devc->num_channels = prof->channels;
310 #ifdef ZP_EXPERIMENTAL
311 devc->max_memory_size = 128 * 1024;
312 devc->max_samplerate = 200;
314 devc->max_memory_size = prof->sample_depth * 1024;
315 devc->max_samplerate = prof->max_sampling_freq;
317 devc->max_samplerate *= SR_MHZ(1);
318 devc->memory_size = MEMORY_SIZE_8K;
319 // memset(devc->trigger_buffer, 0, NUM_TRIGGER_STAGES);
321 /* Fill in probelist according to this device's profile. */
322 for (j = 0; j < devc->num_channels; j++) {
323 if (!(probe = sr_probe_new(j, SR_PROBE_LOGIC, TRUE,
326 sdi->probes = g_slist_append(sdi->probes, probe);
329 devices = g_slist_append(devices, sdi);
330 drvc->instances = g_slist_append(drvc->instances, sdi);
331 sdi->inst_type = SR_INST_USB;
332 sdi->conn = sr_usb_dev_inst_new(
333 libusb_get_bus_number(devlist[i]),
334 libusb_get_device_address(devlist[i]), NULL);
338 libusb_free_device_list(devlist, 1);
343 static GSList *dev_list(void)
345 return ((struct drv_context *)(di->priv))->instances;
348 static int dev_open(struct sr_dev_inst *sdi)
350 struct dev_context *devc;
351 struct drv_context *drvc;
352 struct sr_usb_dev_inst *usb;
353 libusb_device **devlist, *dev;
354 struct libusb_device_descriptor des;
355 int device_count, ret, i;
360 if (!(devc = sdi->priv)) {
361 sr_err("%s: sdi->priv was NULL", __func__);
365 device_count = libusb_get_device_list(drvc->sr_ctx->libusb_ctx,
367 if (device_count < 0) {
368 sr_err("Failed to retrieve device list.");
373 for (i = 0; i < device_count; i++) {
374 if ((ret = libusb_get_device_descriptor(devlist[i], &des))) {
375 sr_err("Failed to get device descriptor: %s.",
376 libusb_error_name(ret));
379 if (libusb_get_bus_number(devlist[i]) == usb->bus
380 && libusb_get_device_address(devlist[i]) == usb->address) {
386 sr_err("Device on bus %d address %d disappeared!",
387 usb->bus, usb->address);
391 if (!(ret = libusb_open(dev, &(usb->devhdl)))) {
392 sdi->status = SR_ST_ACTIVE;
393 sr_info("Opened device %d on %d.%d interface %d.",
394 sdi->index, usb->bus, usb->address, USB_INTERFACE);
396 sr_err("Failed to open device: %s.", libusb_error_name(ret));
400 ret = libusb_set_configuration(usb->devhdl, USB_CONFIGURATION);
402 sr_err("Unable to set USB configuration %d: %s.",
403 USB_CONFIGURATION, libusb_error_name(ret));
407 ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE);
409 sr_err("Unable to claim interface: %s.",
410 libusb_error_name(ret));
414 /* Set default configuration after power on. */
415 if (analyzer_read_status(usb->devhdl) == 0)
416 analyzer_configure(usb->devhdl);
418 analyzer_reset(usb->devhdl);
419 analyzer_initialize(usb->devhdl);
421 //analyzer_set_memory_size(MEMORY_SIZE_512K);
422 // analyzer_set_freq(g_freq, g_freq_scale);
423 analyzer_set_trigger_count(1);
424 // analyzer_set_ramsize_trigger_address((((100 - g_pre_trigger)
425 // * get_memory_size(g_memory_size)) / 100) >> 2);
428 if (g_double_mode == 1)
429 analyzer_set_compression(COMPRESSION_DOUBLE);
430 else if (g_compression == 1)
431 analyzer_set_compression(COMPRESSION_ENABLE);
434 analyzer_set_compression(COMPRESSION_NONE);
436 if (devc->cur_samplerate == 0) {
437 /* Samplerate hasn't been set. Default to 1MHz. */
438 analyzer_set_freq(1, FREQ_SCALE_MHZ);
439 devc->cur_samplerate = SR_MHZ(1);
445 static int dev_close(struct sr_dev_inst *sdi)
447 struct sr_usb_dev_inst *usb;
454 sr_info("Closing device %d on %d.%d interface %d.", sdi->index,
455 usb->bus, usb->address, USB_INTERFACE);
456 libusb_release_interface(usb->devhdl, USB_INTERFACE);
457 libusb_reset_device(usb->devhdl);
458 libusb_close(usb->devhdl);
460 sdi->status = SR_ST_INACTIVE;
465 static int cleanup(void)
470 static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi)
472 struct dev_context *devc;
475 case SR_CONF_SAMPLERATE:
478 *data = g_variant_new_uint64(devc->cur_samplerate);
479 sr_spew("Returning samplerate: %" PRIu64 "Hz.",
480 devc->cur_samplerate);
491 static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi)
493 struct dev_context *devc;
495 if (sdi->status != SR_ST_ACTIVE)
496 return SR_ERR_DEV_CLOSED;
498 if (!(devc = sdi->priv)) {
499 sr_err("%s: sdi->priv was NULL", __func__);
504 case SR_CONF_SAMPLERATE:
505 return zp_set_samplerate(devc, g_variant_get_uint64(data));
506 case SR_CONF_LIMIT_SAMPLES:
507 return set_limit_samples(devc, g_variant_get_uint64(data));
508 case SR_CONF_CAPTURE_RATIO:
509 return set_capture_ratio(devc, g_variant_get_uint64(data));
517 static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi)
519 struct dev_context *devc;
524 case SR_CONF_DEVICE_OPTIONS:
525 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
526 hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t));
528 case SR_CONF_SAMPLERATE:
530 g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
531 if (devc->prof->max_sampling_freq == 100) {
532 gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"),
533 samplerates_100, ARRAY_SIZE(samplerates_100),
535 } else if (devc->prof->max_sampling_freq == 200) {
536 gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"),
537 samplerates_200, ARRAY_SIZE(samplerates_200),
540 sr_err("Internal error: Unknown max. samplerate: %d.",
541 devc->prof->max_sampling_freq);
544 g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
545 *data = g_variant_builder_end(&gvb);
547 case SR_CONF_TRIGGER_TYPE:
548 *data = g_variant_new_string(TRIGGER_TYPE);
557 static int dev_acquisition_start(const struct sr_dev_inst *sdi,
560 struct dev_context *devc;
561 struct sr_usb_dev_inst *usb;
562 struct sr_datafeed_packet packet;
563 struct sr_datafeed_logic logic;
564 //uint64_t samples_read;
566 unsigned int packet_num, n;
569 if (sdi->status != SR_ST_ACTIVE)
570 return SR_ERR_DEV_CLOSED;
572 if (!(devc = sdi->priv)) {
573 sr_err("%s: sdi->priv was NULL", __func__);
577 if (configure_probes(sdi) != SR_OK) {
578 sr_err("Failed to configure probes.");
584 set_triggerbar(devc);
586 /* Push configured settings to device. */
587 analyzer_configure(usb->devhdl);
589 analyzer_start(usb->devhdl);
590 sr_info("Waiting for data.");
591 analyzer_wait_data(usb->devhdl);
593 sr_info("Stop address = 0x%x.",
594 analyzer_get_stop_address(usb->devhdl));
595 sr_info("Now address = 0x%x.",
596 analyzer_get_now_address(usb->devhdl));
597 sr_info("Trigger address = 0x%x.",
598 analyzer_get_trigger_address(usb->devhdl));
600 /* Send header packet to the session bus. */
601 std_session_send_df_header(cb_data, LOG_PREFIX);
603 if (!(buf = g_try_malloc(PACKET_SIZE))) {
604 sr_err("Packet buffer malloc failed.");
605 return SR_ERR_MALLOC;
609 analyzer_read_start(usb->devhdl);
610 /* Send the incoming transfer to the session bus. */
611 n = get_memory_size(devc->memory_size);
612 if (devc->max_memory_size * 4 < n)
613 n = devc->max_memory_size * 4;
614 for (packet_num = 0; packet_num < n / PACKET_SIZE; packet_num++) {
615 res = analyzer_read_data(usb->devhdl, buf, PACKET_SIZE);
616 sr_info("Tried to read %d bytes, actually read %d bytes.",
619 packet.type = SR_DF_LOGIC;
620 packet.payload = &logic;
621 logic.length = PACKET_SIZE;
624 sr_session_send(cb_data, &packet);
625 //samples_read += res / 4;
627 analyzer_read_stop(usb->devhdl);
630 packet.type = SR_DF_END;
631 sr_session_send(cb_data, &packet);
636 /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */
637 static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
639 struct dev_context *devc;
640 struct sr_usb_dev_inst *usb;
641 struct sr_datafeed_packet packet;
643 packet.type = SR_DF_END;
644 sr_session_send(cb_data, &packet);
646 if (!(devc = sdi->priv)) {
647 sr_err("%s: sdi->priv was NULL", __func__);
652 analyzer_reset(usb->devhdl);
653 /* TODO: Need to cancel and free any queued up transfers. */
658 SR_PRIV struct sr_dev_driver zeroplus_logic_cube_driver_info = {
659 .name = "zeroplus-logic-cube",
660 .longname = "ZEROPLUS Logic Cube LAP-C series",
665 .dev_list = dev_list,
666 .dev_clear = dev_clear,
667 .config_get = config_get,
668 .config_set = config_set,
669 .config_list = config_list,
670 .dev_open = dev_open,
671 .dev_close = dev_close,
672 .dev_acquisition_start = dev_acquisition_start,
673 .dev_acquisition_stop = dev_acquisition_stop,