2 * This file is part of the sigrok project.
4 * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
23 #include <sys/types.h>
38 #include <arpa/inet.h>
42 #include "sigrok-internal.h"
46 #define O_NONBLOCK FIONBIO
49 static int capabilities[] = {
50 SR_HWCAP_LOGIC_ANALYZER,
52 SR_HWCAP_CAPTURE_RATIO,
53 SR_HWCAP_LIMIT_SAMPLES,
58 static const char *probe_names[NUM_PROBES + 1] = {
94 /* default supported samplerates, can be overridden by device metadata */
95 static struct sr_samplerates samplerates = {
102 /* List of struct sr_serial_dev_inst */
103 static GSList *dev_insts = NULL;
105 static int send_shortcommand(int fd, uint8_t command)
109 sr_dbg("ols: sending cmd 0x%.2x", command);
111 if (serial_write(fd, buf, 1) != 1)
117 static int send_longcommand(int fd, uint8_t command, uint32_t data)
121 sr_dbg("ols: sending cmd 0x%.2x data 0x%.8x", command, data);
123 buf[1] = (data & 0xff000000) >> 24;
124 buf[2] = (data & 0xff0000) >> 16;
125 buf[3] = (data & 0xff00) >> 8;
126 buf[4] = data & 0xff;
127 if (serial_write(fd, buf, 5) != 5)
133 static int configure_probes(struct ols_dev *ols, GSList *probes)
135 struct sr_probe *probe;
137 int probe_bit, stage, i;
141 for (i = 0; i < NUM_TRIGGER_STAGES; i++) {
142 ols->trigger_mask[i] = 0;
143 ols->trigger_value[i] = 0;
147 for (l = probes; l; l = l->next) {
148 probe = (struct sr_probe *)l->data;
153 * Set up the probe mask for later configuration into the
156 probe_bit = 1 << (probe->index - 1);
157 ols->probe_mask |= probe_bit;
162 /* Configure trigger mask and value. */
164 for (tc = probe->trigger; tc && *tc; tc++) {
165 ols->trigger_mask[stage] |= probe_bit;
167 ols->trigger_value[stage] |= probe_bit;
171 * TODO: Only supporting parallel mode, with
176 if (stage > ols->num_stages)
177 ols->num_stages = stage;
183 static uint32_t reverse16(uint32_t in)
187 out = (in & 0xff) << 8;
188 out |= (in & 0xff00) >> 8;
189 out |= (in & 0xff0000) << 8;
190 out |= (in & 0xff000000) >> 8;
195 static uint32_t reverse32(uint32_t in)
199 out = (in & 0xff) << 24;
200 out |= (in & 0xff00) << 8;
201 out |= (in & 0xff0000) >> 8;
202 out |= (in & 0xff000000) >> 24;
207 static struct ols_dev *ols_dev_new(void)
211 /* TODO: Is 'ols' ever g_free()'d? */
212 if (!(ols = g_try_malloc0(sizeof(struct ols_dev)))) {
213 sr_err("ols: %s: ols malloc failed", __func__);
217 ols->trigger_at = -1;
218 ols->probe_mask = 0xffffffff;
219 ols->cur_samplerate = SR_KHZ(200);
225 static struct sr_dev_inst *get_metadata(int fd)
227 struct sr_dev_inst *sdi;
230 uint8_t key, type, token;
231 GString *tmp_str, *devname, *version;
234 sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, NULL, NULL, NULL);
238 devname = g_string_new("");
239 version = g_string_new("");
243 if (serial_read(fd, &key, 1) != 1 || key == 0x00)
249 /* NULL-terminated string */
250 tmp_str = g_string_new("");
251 while (serial_read(fd, &tmp_c, 1) == 1 && tmp_c != '\0')
252 g_string_append_c(tmp_str, tmp_c);
253 sr_dbg("ols: got metadata key 0x%.2x value '%s'",
258 devname = g_string_append(devname, tmp_str->str);
261 /* FPGA firmware version */
263 g_string_append(version, ", ");
264 g_string_append(version, "FPGA version ");
265 g_string_append(version, tmp_str->str);
268 /* Ancillary version */
270 g_string_append(version, ", ");
271 g_string_append(version, "Ancillary version ");
272 g_string_append(version, tmp_str->str);
275 sr_info("ols: unknown token 0x%.2x: '%s'",
276 token, tmp_str->str);
279 g_string_free(tmp_str, TRUE);
282 /* 32-bit unsigned integer */
283 if (serial_read(fd, &tmp_int, 4) != 4)
285 tmp_int = reverse32(tmp_int);
286 sr_dbg("ols: got metadata key 0x%.2x value 0x%.8x",
290 /* Number of usable probes */
291 ols->num_probes = tmp_int;
294 /* Amount of sample memory available (bytes) */
295 ols->max_samples = tmp_int;
298 /* Amount of dynamic memory available (bytes) */
299 /* what is this for? */
302 /* Maximum sample rate (hz) */
303 ols->max_samplerate = tmp_int;
306 /* protocol version */
307 ols->protocol_version = tmp_int;
310 sr_info("ols: unknown token 0x%.2x: 0x%.8x",
316 /* 8-bit unsigned integer */
317 if (serial_read(fd, &tmp_c, 1) != 1)
319 sr_dbg("ols: got metadata key 0x%.2x value 0x%.2x",
323 /* Number of usable probes */
324 ols->num_probes = tmp_c;
327 /* protocol version */
328 ols->protocol_version = tmp_c;
331 sr_info("ols: unknown token 0x%.2x: 0x%.2x",
342 sdi->model = devname->str;
343 sdi->version = version->str;
344 g_string_free(devname, FALSE);
345 g_string_free(version, FALSE);
350 static int hw_init(const char *devinfo)
352 struct sr_dev_inst *sdi;
355 GPollFD *fds, probefd;
356 int devcnt, final_devcnt, num_ports, fd, ret, i;
357 char buf[8], **dev_names, **serial_params;
362 ports = g_slist_append(NULL, g_strdup(devinfo));
364 /* No specific device given, so scan all serial ports. */
365 ports = list_serial_ports();
367 num_ports = g_slist_length(ports);
369 if (!(fds = g_try_malloc0(num_ports * sizeof(GPollFD)))) {
370 sr_err("ols: %s: fds malloc failed", __func__);
371 goto hw_init_free_ports; /* TODO: SR_ERR_MALLOC. */
374 if (!(dev_names = g_try_malloc(num_ports * sizeof(char *)))) {
375 sr_err("ols: %s: dev_names malloc failed", __func__);
376 goto hw_init_free_fds; /* TODO: SR_ERR_MALLOC. */
379 if (!(serial_params = g_try_malloc(num_ports * sizeof(char *)))) {
380 sr_err("ols: %s: serial_params malloc failed", __func__);
381 goto hw_init_free_dev_names; /* TODO: SR_ERR_MALLOC. */
385 for (l = ports; l; l = l->next) {
386 /* The discovery procedure is like this: first send the Reset
387 * command (0x00) 5 times, since the device could be anywhere
388 * in a 5-byte command. Then send the ID command (0x02).
389 * If the device responds with 4 bytes ("OLS1" or "SLA1"), we
392 * Since it may take the device a while to respond at 115Kb/s,
393 * we do all the sending first, then wait for all of them to
394 * respond with g_poll().
396 sr_info("ols: probing %s...", (char *)l->data);
397 fd = serial_open(l->data, O_RDWR | O_NONBLOCK);
399 serial_params[devcnt] = serial_backup_params(fd);
400 serial_set_params(fd, 115200, 8, 0, 1, 2);
402 for (i = 0; i < 5; i++) {
403 if ((ret = send_shortcommand(fd,
404 CMD_RESET)) != SR_OK) {
405 /* Serial port is not writable. */
410 serial_restore_params(fd,
411 serial_params[devcnt]);
415 send_shortcommand(fd, CMD_ID);
417 fds[devcnt].events = G_IO_IN;
418 dev_names[devcnt] = g_strdup(l->data);
424 /* 2ms isn't enough for reliable transfer with pl2303, let's try 10 */
427 g_poll(fds, devcnt, 1);
429 for (i = 0; i < devcnt; i++) {
430 if (fds[i].revents != G_IO_IN)
432 if (serial_read(fds[i].fd, buf, 4) != 4)
434 if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
437 /* definitely using the OLS protocol, check if it supports
438 * the metadata command
440 send_shortcommand(fds[i].fd, CMD_METADATA);
441 probefd.fd = fds[i].fd;
442 probefd.events = G_IO_IN;
443 if (g_poll(&probefd, 1, 10) > 0) {
445 sdi = get_metadata(fds[i].fd);
446 sdi->index = final_devcnt;
448 /* not an OLS -- some other board that uses the sump protocol */
449 sdi = sr_dev_inst_new(final_devcnt, SR_ST_INACTIVE,
450 "Sump", "Logic Analyzer", "v1.0");
452 ols->num_probes = 32;
455 ols->serial = sr_serial_dev_inst_new(dev_names[i], -1);
456 dev_insts = g_slist_append(dev_insts, sdi);
458 serial_close(fds[i].fd);
462 /* clean up after all the probing */
463 for (i = 0; i < devcnt; i++) {
464 if (fds[i].fd != 0) {
465 serial_restore_params(fds[i].fd, serial_params[i]);
466 serial_close(fds[i].fd);
468 g_free(serial_params[i]);
469 g_free(dev_names[i]);
472 g_free(serial_params);
473 hw_init_free_dev_names:
483 static int hw_opendev(int dev_index)
485 struct sr_dev_inst *sdi;
488 if (!(sdi = sr_dev_inst_get(dev_insts, dev_index)))
493 ols->serial->fd = serial_open(ols->serial->port, O_RDWR);
494 if (ols->serial->fd == -1)
497 sdi->status = SR_ST_ACTIVE;
502 static int hw_closedev(int dev_index)
504 struct sr_dev_inst *sdi;
507 if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) {
508 sr_err("ols: %s: sdi was NULL", __func__);
509 return SR_ERR; /* TODO: SR_ERR_ARG? */
515 if (ols->serial->fd != -1) {
516 serial_close(ols->serial->fd);
517 ols->serial->fd = -1;
518 sdi->status = SR_ST_INACTIVE;
524 static int hw_cleanup(void)
527 struct sr_dev_inst *sdi;
531 /* Properly close and free all devices. */
532 for (l = dev_insts; l; l = l->next) {
533 if (!(sdi = l->data)) {
534 /* Log error, but continue cleaning up the rest. */
535 sr_err("ols: %s: sdi was NULL, continuing", __func__);
539 if (!(ols = sdi->priv)) {
540 /* Log error, but continue cleaning up the rest. */
541 sr_err("ols: %s: sdi->priv was NULL, continuing",
546 /* TODO: Check for serial != NULL. */
547 if (ols->serial->fd != -1)
548 serial_close(ols->serial->fd);
549 sr_serial_dev_inst_free(ols->serial);
550 sr_dev_inst_free(sdi);
552 g_slist_free(dev_insts);
558 static void *hw_get_dev_info(int dev_index, int dev_info_id)
560 struct sr_dev_inst *sdi;
564 if (!(sdi = sr_dev_inst_get(dev_insts, dev_index)))
569 switch (dev_info_id) {
573 case SR_DI_NUM_PROBES:
574 info = GINT_TO_POINTER(NUM_PROBES);
576 case SR_DI_PROBE_NAMES:
579 case SR_DI_SAMPLERATES:
582 case SR_DI_TRIGGER_TYPES:
583 info = (char *)TRIGGER_TYPES;
585 case SR_DI_CUR_SAMPLERATE:
586 info = &ols->cur_samplerate;
593 static int hw_get_status(int dev_index)
595 struct sr_dev_inst *sdi;
597 if (!(sdi = sr_dev_inst_get(dev_insts, dev_index)))
598 return SR_ST_NOT_FOUND;
603 static int *hw_get_capabilities(void)
608 static int set_configuration_samplerate(struct sr_dev_inst *sdi,
614 if (ols->max_samplerate) {
615 if (samplerate > ols->max_samplerate)
616 return SR_ERR_SAMPLERATE;
617 } else if (samplerate < samplerates.low || samplerate > samplerates.high)
618 return SR_ERR_SAMPLERATE;
620 if (samplerate > CLOCK_RATE) {
621 ols->flag_reg |= FLAG_DEMUX;
622 ols->cur_samplerate_divider = (CLOCK_RATE * 2 / samplerate) - 1;
624 ols->flag_reg &= ~FLAG_DEMUX;
625 ols->cur_samplerate_divider = (CLOCK_RATE / samplerate) - 1;
628 /* Calculate actual samplerate used and complain if it is different
629 * from the requested.
631 ols->cur_samplerate = CLOCK_RATE / (ols->cur_samplerate_divider + 1);
632 if (ols->flag_reg & FLAG_DEMUX)
633 ols->cur_samplerate *= 2;
634 if (ols->cur_samplerate != samplerate)
635 sr_err("ols: can't match samplerate %" PRIu64 ", using %"
636 PRIu64, samplerate, ols->cur_samplerate);
641 static int hw_set_configuration(int dev_index, int capability, void *value)
643 struct sr_dev_inst *sdi;
648 if (!(sdi = sr_dev_inst_get(dev_insts, dev_index)))
652 if (sdi->status != SR_ST_ACTIVE)
655 switch (capability) {
656 case SR_HWCAP_SAMPLERATE:
658 ret = set_configuration_samplerate(sdi, *tmp_u64);
660 case SR_HWCAP_PROBECONFIG:
661 ret = configure_probes(ols, (GSList *) value);
663 case SR_HWCAP_LIMIT_SAMPLES:
665 if (*tmp_u64 < MIN_NUM_SAMPLES)
667 if (*tmp_u64 > ols->max_samples)
668 sr_err("ols: sample limit exceeds hw max");
669 ols->limit_samples = *tmp_u64;
670 sr_info("ols: sample limit %" PRIu64, ols->limit_samples);
673 case SR_HWCAP_CAPTURE_RATIO:
675 ols->capture_ratio = *tmp_u64;
676 if (ols->capture_ratio < 0 || ols->capture_ratio > 100) {
677 ols->capture_ratio = 0;
683 if (GPOINTER_TO_INT(value)) {
684 sr_info("ols: enabling RLE");
685 ols->flag_reg |= FLAG_RLE;
696 static int receive_data(int fd, int revents, void *session_data)
698 struct sr_datafeed_packet packet;
699 struct sr_datafeed_logic logic;
700 struct sr_dev_inst *sdi;
703 int num_channels, offset, i, j;
706 /* find this device's ols_dev struct by its fd */
708 for (l = dev_insts; l; l = l->next) {
710 if (ols->serial->fd == fd) {
716 /* shouldn't happen */
719 if (ols->num_transfers++ == 0) {
721 * First time round, means the device started sending data,
722 * and will not stop until done. If it stops sending for
723 * longer than it takes to send a byte, that means it's
724 * finished. We'll double that to 30ms to be sure...
726 sr_source_remove(fd);
727 sr_source_add(fd, G_IO_IN, 30, receive_data, session_data);
728 ols->raw_sample_buf = g_try_malloc(ols->limit_samples * 4);
729 if (!ols->raw_sample_buf) {
730 sr_err("ols: %s: ols->raw_sample_buf malloc failed",
734 /* fill with 1010... for debugging */
735 memset(ols->raw_sample_buf, 0x82, ols->limit_samples * 4);
739 for (i = 0x20; i > 0x02; i /= 2) {
740 if ((ols->flag_reg & i) == 0)
744 if (revents == G_IO_IN) {
745 if (serial_read(fd, &byte, 1) != 1)
748 /* Ignore it if we've read enough. */
749 if (ols->num_samples >= ols->limit_samples)
752 ols->sample[ols->num_bytes++] = byte;
753 sr_dbg("ols: received byte 0x%.2x", byte);
754 if (ols->num_bytes == num_channels) {
755 /* Got a full sample. */
756 sr_dbg("ols: received sample 0x%.*x",
757 ols->num_bytes * 2, *(int *)ols->sample);
758 if (ols->flag_reg & FLAG_RLE) {
760 * In RLE mode -1 should never come in as a
761 * sample, because bit 31 is the "count" flag.
763 if (ols->sample[ols->num_bytes - 1] & 0x80) {
764 ols->sample[ols->num_bytes - 1] &= 0x7f;
766 * FIXME: This will only work on
767 * little-endian systems.
769 ols->rle_count = *(int *)(ols->sample);
770 sr_dbg("ols: RLE count = %d", ols->rle_count);
775 ols->num_samples += ols->rle_count + 1;
776 if (ols->num_samples > ols->limit_samples) {
777 /* Save us from overrunning the buffer. */
778 ols->rle_count -= ols->num_samples - ols->limit_samples;
779 ols->num_samples = ols->limit_samples;
782 if (num_channels < 4) {
784 * Some channel groups may have been turned
785 * off, to speed up transfer between the
786 * hardware and the PC. Expand that here before
787 * submitting it over the session bus --
788 * whatever is listening on the bus will be
789 * expecting a full 32-bit sample, based on
790 * the number of probes.
793 memset(ols->tmp_sample, 0, 4);
794 for (i = 0; i < 4; i++) {
795 if (((ols->flag_reg >> 2) & (1 << i)) == 0) {
797 * This channel group was
798 * enabled, copy from received
801 ols->tmp_sample[i] = ols->sample[j++];
804 memcpy(ols->sample, ols->tmp_sample, 4);
805 sr_dbg("ols: full sample 0x%.8x", *(int *)ols->sample);
808 /* the OLS sends its sample buffer backwards.
809 * store it in reverse order here, so we can dump
810 * this on the session bus later.
812 offset = (ols->limit_samples - ols->num_samples) * 4;
813 for (i = 0; i <= ols->rle_count; i++) {
814 memcpy(ols->raw_sample_buf + offset + (i * 4),
817 memset(ols->sample, 0, 4);
823 * This is the main loop telling us a timeout was reached, or
824 * we've acquired all the samples we asked for -- we're done.
825 * Send the (properly-ordered) buffer to the frontend.
827 if (ols->trigger_at != -1) {
828 /* a trigger was set up, so we need to tell the frontend
831 if (ols->trigger_at > 0) {
832 /* there are pre-trigger samples, send those first */
833 packet.type = SR_DF_LOGIC;
834 packet.payload = &logic;
835 logic.length = ols->trigger_at * 4;
837 logic.data = ols->raw_sample_buf +
838 (ols->limit_samples - ols->num_samples) * 4;
839 sr_session_bus(session_data, &packet);
842 /* send the trigger */
843 packet.type = SR_DF_TRIGGER;
844 sr_session_bus(session_data, &packet);
846 /* send post-trigger samples */
847 packet.type = SR_DF_LOGIC;
848 packet.payload = &logic;
849 logic.length = (ols->num_samples * 4) - (ols->trigger_at * 4);
851 logic.data = ols->raw_sample_buf + ols->trigger_at * 4 +
852 (ols->limit_samples - ols->num_samples) * 4;
853 sr_session_bus(session_data, &packet);
855 /* no trigger was used */
856 packet.type = SR_DF_LOGIC;
857 packet.payload = &logic;
858 logic.length = ols->num_samples * 4;
860 logic.data = ols->raw_sample_buf +
861 (ols->limit_samples - ols->num_samples) * 4;
862 sr_session_bus(session_data, &packet);
864 g_free(ols->raw_sample_buf);
868 packet.type = SR_DF_END;
869 sr_session_bus(session_data, &packet);
875 static int hw_start_acquisition(int dev_index, gpointer session_data)
877 struct sr_datafeed_packet *packet;
878 struct sr_datafeed_header *header;
879 struct sr_dev_inst *sdi;
881 uint32_t trigger_config[4];
883 uint16_t readcount, delaycount;
884 uint8_t changrp_mask;
888 if (!(sdi = sr_dev_inst_get(dev_insts, dev_index)))
893 if (sdi->status != SR_ST_ACTIVE)
897 * Enable/disable channel groups in the flag register according to the
898 * probe mask. Calculate this here, because num_channels is needed
899 * to limit readcount.
903 for (i = 0; i < 4; i++) {
904 if (ols->probe_mask & (0xff << (i * 8))) {
905 changrp_mask |= (1 << i);
911 * Limit readcount to prevent reading past the end of the hardware
914 readcount = MIN(ols->max_samples / num_channels, ols->limit_samples) / 4;
916 memset(trigger_config, 0, 16);
917 trigger_config[ols->num_stages - 1] |= 0x08;
918 if (ols->trigger_mask[0]) {
919 delaycount = readcount * (1 - ols->capture_ratio / 100.0);
920 ols->trigger_at = (readcount - delaycount) * 4 - ols->num_stages;
922 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_MASK_0,
923 reverse32(ols->trigger_mask[0])) != SR_OK)
925 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_VALUE_0,
926 reverse32(ols->trigger_value[0])) != SR_OK)
928 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_CONFIG_0,
929 trigger_config[0]) != SR_OK)
932 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_MASK_1,
933 reverse32(ols->trigger_mask[1])) != SR_OK)
935 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_VALUE_1,
936 reverse32(ols->trigger_value[1])) != SR_OK)
938 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_CONFIG_1,
939 trigger_config[1]) != SR_OK)
942 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_MASK_2,
943 reverse32(ols->trigger_mask[2])) != SR_OK)
945 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_VALUE_2,
946 reverse32(ols->trigger_value[2])) != SR_OK)
948 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_CONFIG_2,
949 trigger_config[2]) != SR_OK)
952 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_MASK_3,
953 reverse32(ols->trigger_mask[3])) != SR_OK)
955 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_VALUE_3,
956 reverse32(ols->trigger_value[3])) != SR_OK)
958 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_CONFIG_3,
959 trigger_config[3]) != SR_OK)
962 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_MASK_0,
963 ols->trigger_mask[0]) != SR_OK)
965 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_VALUE_0,
966 ols->trigger_value[0]) != SR_OK)
968 if (send_longcommand(ols->serial->fd, CMD_SET_TRIGGER_CONFIG_0,
969 0x00000008) != SR_OK)
971 delaycount = readcount;
974 sr_info("ols: setting samplerate to %" PRIu64 " Hz (divider %u, "
975 "demux %s)", ols->cur_samplerate, ols->cur_samplerate_divider,
976 ols->flag_reg & FLAG_DEMUX ? "on" : "off");
977 if (send_longcommand(ols->serial->fd, CMD_SET_DIVIDER,
978 reverse32(ols->cur_samplerate_divider)) != SR_OK)
981 /* Send sample limit and pre/post-trigger capture ratio. */
982 data = ((readcount - 1) & 0xffff) << 16;
983 data |= (delaycount - 1) & 0xffff;
984 if (send_longcommand(ols->serial->fd, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK)
987 /* The flag register wants them here, and 1 means "disable channel". */
988 ols->flag_reg |= ~(changrp_mask << 2) & 0x3c;
989 ols->flag_reg |= FLAG_FILTER;
991 data = (ols->flag_reg << 24) | ((ols->flag_reg << 8) & 0xff0000);
992 if (send_longcommand(ols->serial->fd, CMD_SET_FLAGS, data) != SR_OK)
995 /* Start acquisition on the device. */
996 if (send_shortcommand(ols->serial->fd, CMD_RUN) != SR_OK)
999 sr_source_add(ols->serial->fd, G_IO_IN, -1, receive_data,
1002 if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) {
1003 sr_err("ols: %s: packet malloc failed", __func__);
1004 return SR_ERR_MALLOC;
1007 if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) {
1008 sr_err("ols: %s: header malloc failed", __func__);
1010 return SR_ERR_MALLOC;
1013 /* Send header packet to the session bus. */
1014 packet->type = SR_DF_HEADER;
1015 packet->payload = (unsigned char *)header;
1016 header->feed_version = 1;
1017 gettimeofday(&header->starttime, NULL);
1018 header->samplerate = ols->cur_samplerate;
1019 header->num_logic_probes = NUM_PROBES;
1020 sr_session_bus(session_data, packet);
1028 static int hw_stop_acquisition(int dev_index, gpointer session_dev_id)
1030 struct sr_datafeed_packet packet;
1032 /* Avoid compiler warnings. */
1035 packet.type = SR_DF_END;
1036 sr_session_bus(session_dev_id, &packet);
1041 SR_PRIV struct sr_dev_plugin ols_plugin_info = {
1043 .longname = "Openbench Logic Sniffer",
1046 .cleanup = hw_cleanup,
1047 .opendev = hw_opendev,
1048 .closedev = hw_closedev,
1049 .get_dev_info = hw_get_dev_info,
1050 .get_status = hw_get_status,
1051 .get_capabilities = hw_get_capabilities,
1052 .set_configuration = hw_set_configuration,
1053 .start_acquisition = hw_start_acquisition,
1054 .stop_acquisition = hw_stop_acquisition,