2 * This file is part of the libsigrok project.
4 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
22 #define SERIALCOMM "115200/8n1"
24 static const int32_t hwopts[] = {
29 static const int32_t hwcaps[] = {
30 SR_CONF_LOGIC_ANALYZER,
33 SR_CONF_CAPTURE_RATIO,
34 SR_CONF_LIMIT_SAMPLES,
38 /* Probes are numbered 0-31 (on the PCB silkscreen). */
39 SR_PRIV const char *ols_probe_names[NUM_PROBES + 1] = {
40 "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12",
41 "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23",
42 "24", "25", "26", "27", "28", "29", "30", "31",
46 /* Default supported samplerates, can be overridden by device metadata. */
47 static const uint64_t samplerates[] = {
53 SR_PRIV struct sr_dev_driver ols_driver_info;
54 static struct sr_dev_driver *di = &ols_driver_info;
56 static int init(struct sr_context *sr_ctx)
58 return std_hw_init(sr_ctx, di, LOG_PREFIX);
61 static GSList *scan(GSList *options)
63 struct sr_config *src;
64 struct sr_dev_inst *sdi;
65 struct drv_context *drvc;
66 struct dev_context *devc;
67 struct sr_probe *probe;
68 struct sr_serial_dev_inst *serial;
72 const char *conn, *serialcomm;
81 conn = serialcomm = NULL;
82 for (l = options; l; l = l->next) {
86 conn = g_variant_get_string(src->data, NULL);
88 case SR_CONF_SERIALCOMM:
89 serialcomm = g_variant_get_string(src->data, NULL);
96 if (serialcomm == NULL)
97 serialcomm = SERIALCOMM;
99 if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
102 /* The discovery procedure is like this: first send the Reset
103 * command (0x00) 5 times, since the device could be anywhere
104 * in a 5-byte command. Then send the ID command (0x02).
105 * If the device responds with 4 bytes ("OLS1" or "SLA1"), we
108 sr_info("Probing %s.", conn);
109 if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
113 for (i = 0; i < 5; i++) {
114 if ((ret = send_shortcommand(serial, CMD_RESET)) != SR_OK) {
115 sr_err("Port %s is not writable.", conn);
120 serial_close(serial);
121 sr_err("Could not use port %s. Quitting.", conn);
124 send_shortcommand(serial, CMD_ID);
126 /* Wait 10ms for a response. */
129 probefd.fd = serial->fd;
130 probefd.events = G_IO_IN;
131 g_poll(&probefd, 1, 1);
133 if (probefd.revents != G_IO_IN)
135 if (serial_read(serial, buf, 4) != 4)
137 if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
140 /* Definitely using the OLS protocol, check if it supports
141 * the metadata command.
143 send_shortcommand(serial, CMD_METADATA);
144 if (g_poll(&probefd, 1, 10) > 0) {
146 sdi = get_metadata(serial);
150 /* Not an OLS -- some other board that uses the sump protocol. */
151 sr_info("Device does not support metadata.");
152 sdi = sr_dev_inst_new(0, SR_ST_INACTIVE,
153 "Sump", "Logic Analyzer", "v1.0");
155 for (i = 0; i < 32; i++) {
156 if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
157 ols_probe_names[i])))
159 sdi->probes = g_slist_append(sdi->probes, probe);
161 devc = ols_dev_new();
164 /* Configure samplerate and divider. */
165 if (ols_set_samplerate(sdi, DEFAULT_SAMPLERATE) != SR_OK)
166 sr_dbg("Failed to set default samplerate (%"PRIu64").",
168 /* Clear trigger masks, values and stages. */
169 ols_configure_probes(sdi);
170 sdi->inst_type = SR_INST_SERIAL;
173 drvc->instances = g_slist_append(drvc->instances, sdi);
174 devices = g_slist_append(devices, sdi);
176 serial_close(serial);
181 static GSList *dev_list(void)
183 return ((struct drv_context *)(di->priv))->instances;
186 static int dev_open(struct sr_dev_inst *sdi)
188 struct sr_serial_dev_inst *serial;
191 if (serial_open(serial, SERIAL_RDWR) != SR_OK)
194 sdi->status = SR_ST_ACTIVE;
199 static int dev_close(struct sr_dev_inst *sdi)
201 struct sr_serial_dev_inst *serial;
204 if (serial && serial->fd != -1) {
205 serial_close(serial);
206 sdi->status = SR_ST_INACTIVE;
212 static int dev_clear(void)
214 return std_dev_clear(di, NULL);
217 static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi)
219 struct dev_context *devc;
226 case SR_CONF_SAMPLERATE:
227 *data = g_variant_new_uint64(devc->cur_samplerate);
229 case SR_CONF_CAPTURE_RATIO:
230 *data = g_variant_new_uint64(devc->capture_ratio);
232 case SR_CONF_LIMIT_SAMPLES:
233 *data = g_variant_new_uint64(devc->limit_samples);
236 *data = g_variant_new_boolean(devc->flag_reg & FLAG_RLE ? TRUE : FALSE);
245 static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi)
247 struct dev_context *devc;
251 if (sdi->status != SR_ST_ACTIVE)
252 return SR_ERR_DEV_CLOSED;
257 case SR_CONF_SAMPLERATE:
258 tmp_u64 = g_variant_get_uint64(data);
259 if (tmp_u64 < samplerates[0] || tmp_u64 > samplerates[1])
260 return SR_ERR_SAMPLERATE;
261 ret = ols_set_samplerate(sdi, g_variant_get_uint64(data));
263 case SR_CONF_LIMIT_SAMPLES:
264 tmp_u64 = g_variant_get_uint64(data);
265 if (tmp_u64 < MIN_NUM_SAMPLES)
267 devc->limit_samples = tmp_u64;
270 case SR_CONF_CAPTURE_RATIO:
271 devc->capture_ratio = g_variant_get_uint64(data);
272 if (devc->capture_ratio < 0 || devc->capture_ratio > 100) {
273 devc->capture_ratio = 0;
279 if (g_variant_get_boolean(data)) {
280 sr_info("Enabling RLE.");
281 devc->flag_reg |= FLAG_RLE;
283 sr_info("Disabling RLE.");
284 devc->flag_reg &= ~FLAG_RLE;
295 static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi)
303 case SR_CONF_SCAN_OPTIONS:
304 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
305 hwopts, ARRAY_SIZE(hwopts), sizeof(int32_t));
307 case SR_CONF_DEVICE_OPTIONS:
308 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
309 hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t));
311 case SR_CONF_SAMPLERATE:
312 g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
313 gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
314 ARRAY_SIZE(samplerates), sizeof(uint64_t));
315 g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar);
316 *data = g_variant_builder_end(&gvb);
318 case SR_CONF_TRIGGER_TYPE:
319 *data = g_variant_new_string(TRIGGER_TYPE);
328 static int dev_acquisition_start(const struct sr_dev_inst *sdi,
331 struct dev_context *devc;
332 struct sr_serial_dev_inst *serial;
333 uint32_t trigger_config[4];
335 uint16_t readcount, delaycount;
336 uint8_t changrp_mask;
340 if (sdi->status != SR_ST_ACTIVE)
341 return SR_ERR_DEV_CLOSED;
346 if (ols_configure_probes(sdi) != SR_OK) {
347 sr_err("Failed to configure probes.");
352 * Enable/disable channel groups in the flag register according to the
353 * probe mask. Calculate this here, because num_channels is needed
354 * to limit readcount.
358 for (i = 0; i < 4; i++) {
359 if (devc->probe_mask & (0xff << (i * 8))) {
360 changrp_mask |= (1 << i);
366 * Limit readcount to prevent reading past the end of the hardware
369 readcount = MIN(devc->max_samples / num_channels, devc->limit_samples) / 4;
371 memset(trigger_config, 0, 16);
372 trigger_config[devc->num_stages] |= 0x08;
373 if (devc->trigger_mask[0]) {
374 delaycount = readcount * (1 - devc->capture_ratio / 100.0);
375 devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages;
377 if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_0,
378 reverse32(devc->trigger_mask[0])) != SR_OK)
380 if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_0,
381 reverse32(devc->trigger_value[0])) != SR_OK)
383 if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_0,
384 trigger_config[0]) != SR_OK)
387 if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_1,
388 reverse32(devc->trigger_mask[1])) != SR_OK)
390 if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_1,
391 reverse32(devc->trigger_value[1])) != SR_OK)
393 if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_1,
394 trigger_config[1]) != SR_OK)
397 if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_2,
398 reverse32(devc->trigger_mask[2])) != SR_OK)
400 if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_2,
401 reverse32(devc->trigger_value[2])) != SR_OK)
403 if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_2,
404 trigger_config[2]) != SR_OK)
407 if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_3,
408 reverse32(devc->trigger_mask[3])) != SR_OK)
410 if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_3,
411 reverse32(devc->trigger_value[3])) != SR_OK)
413 if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_3,
414 trigger_config[3]) != SR_OK)
417 if (send_longcommand(serial, CMD_SET_TRIGGER_MASK_0,
418 devc->trigger_mask[0]) != SR_OK)
420 if (send_longcommand(serial, CMD_SET_TRIGGER_VALUE_0,
421 devc->trigger_value[0]) != SR_OK)
423 if (send_longcommand(serial, CMD_SET_TRIGGER_CONFIG_0,
424 0x00000008) != SR_OK)
426 delaycount = readcount;
429 sr_info("Setting samplerate to %" PRIu64 "Hz (divider %u, "
430 "demux %s)", devc->cur_samplerate, devc->cur_samplerate_divider,
431 devc->flag_reg & FLAG_DEMUX ? "on" : "off");
432 if (send_longcommand(serial, CMD_SET_DIVIDER,
433 reverse32(devc->cur_samplerate_divider)) != SR_OK)
436 /* Send sample limit and pre/post-trigger capture ratio. */
437 data = ((readcount - 1) & 0xffff) << 16;
438 data |= (delaycount - 1) & 0xffff;
439 if (send_longcommand(serial, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK)
442 /* The flag register wants them here, and 1 means "disable channel". */
443 devc->flag_reg |= ~(changrp_mask << 2) & 0x3c;
444 devc->flag_reg |= FLAG_FILTER;
446 data = (devc->flag_reg << 24) | ((devc->flag_reg << 8) & 0xff0000);
447 if (send_longcommand(serial, CMD_SET_FLAGS, data) != SR_OK)
450 /* Start acquisition on the device. */
451 if (send_shortcommand(serial, CMD_RUN) != SR_OK)
454 /* Reset all operational states. */
455 devc->num_transfers = devc->num_samples = devc->num_bytes = 0;
457 /* Send header packet to the session bus. */
458 std_session_send_df_header(cb_data, LOG_PREFIX);
460 sr_source_add(serial->fd, G_IO_IN, -1, ols_receive_data, cb_data);
465 static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
467 /* Avoid compiler warnings. */
470 abort_acquisition(sdi);
475 SR_PRIV struct sr_dev_driver ols_driver_info = {
477 .longname = "Openbench Logic Sniffer",
480 .cleanup = dev_clear,
482 .dev_list = dev_list,
483 .dev_clear = dev_clear,
484 .config_get = config_get,
485 .config_set = config_set,
486 .config_list = config_list,
487 .dev_open = dev_open,
488 .dev_close = dev_close,
489 .dev_acquisition_start = dev_acquisition_start,
490 .dev_acquisition_stop = dev_acquisition_stop,