2 * This file is part of the sigrok project.
4 * Copyright (C) 2010-2012 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
22 #define SERIALCOMM "115200/8n1"
24 static const int hwopts[] = {
30 static const int hwcaps[] = {
31 SR_CONF_LOGIC_ANALYZER,
33 SR_CONF_CAPTURE_RATIO,
34 SR_CONF_LIMIT_SAMPLES,
39 /* Probes are numbered 0-31 (on the PCB silkscreen). */
40 SR_PRIV const char *ols_probe_names[NUM_PROBES + 1] = {
41 "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12",
42 "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23",
43 "24", "25", "26", "27", "28", "29", "30", "31",
47 /* default supported samplerates, can be overridden by device metadata */
48 static const struct sr_samplerates samplerates = {
55 SR_PRIV struct sr_dev_driver ols_driver_info;
56 static struct sr_dev_driver *di = &ols_driver_info;
58 static int hw_init(struct sr_context *sr_ctx)
60 struct drv_context *drvc;
62 if (!(drvc = g_try_malloc0(sizeof(struct drv_context)))) {
63 sr_err("Driver context malloc failed.");
66 drvc->sr_ctx = sr_ctx;
72 static GSList *hw_scan(GSList *options)
74 struct sr_config *src;
75 struct sr_dev_inst *sdi;
76 struct drv_context *drvc;
77 struct dev_context *devc;
78 struct sr_probe *probe;
79 struct sr_serial_dev_inst *serial;
83 const char *conn, *serialcomm;
90 conn = serialcomm = NULL;
91 for (l = options; l; l = l->next) {
97 case SR_CONF_SERIALCOMM:
98 serialcomm = src->value;
105 if (serialcomm == NULL)
106 serialcomm = SERIALCOMM;
108 if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
111 /* The discovery procedure is like this: first send the Reset
112 * command (0x00) 5 times, since the device could be anywhere
113 * in a 5-byte command. Then send the ID command (0x02).
114 * If the device responds with 4 bytes ("OLS1" or "SLA1"), we
117 sr_info("Probing %s.", conn);
118 if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
122 for (i = 0; i < 5; i++) {
123 if ((ret = send_shortcommand(serial, CMD_RESET)) != SR_OK) {
124 sr_err("Port %s is not writable.", conn);
129 serial_close(serial);
130 sr_err("Could not use port %s. Quitting.", conn);
133 send_shortcommand(serial, CMD_ID);
135 /* Wait 10ms for a response. */
138 probefd.fd = serial->fd;
139 probefd.events = G_IO_IN;
140 g_poll(&probefd, 1, 1);
142 if (probefd.revents != G_IO_IN)
144 if (serial_read(serial, buf, 4) != 4)
146 if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
149 /* Definitely using the OLS protocol, check if it supports
150 * the metadata command.
152 send_shortcommand(serial, CMD_METADATA);
153 if (g_poll(&probefd, 1, 10) > 0) {
155 sdi = get_metadata(serial);
159 /* Not an OLS -- some other board that uses the sump protocol. */
160 sdi = sr_dev_inst_new(0, SR_ST_INACTIVE,
161 "Sump", "Logic Analyzer", "v1.0");
163 devc = ols_dev_new();
164 for (i = 0; i < 32; i++) {
165 if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
166 ols_probe_names[i])))
168 sdi->probes = g_slist_append(sdi->probes, probe);
172 devc->serial = serial;
173 drvc->instances = g_slist_append(drvc->instances, sdi);
174 devices = g_slist_append(devices, sdi);
176 serial_close(serial);
181 static GSList *hw_dev_list(void)
183 struct drv_context *drvc;
187 return drvc->instances;
190 static int hw_dev_open(struct sr_dev_inst *sdi)
192 struct dev_context *devc;
196 if (serial_open(devc->serial, SERIAL_RDWR) != SR_OK)
199 sdi->status = SR_ST_ACTIVE;
204 static int hw_dev_close(struct sr_dev_inst *sdi)
206 struct dev_context *devc;
210 if (devc->serial && devc->serial->fd != -1) {
211 serial_close(devc->serial);
212 sdi->status = SR_ST_INACTIVE;
218 static int hw_cleanup(void)
221 struct sr_dev_inst *sdi;
222 struct drv_context *drvc;
223 struct dev_context *devc;
226 if (!(drvc = di->priv))
229 /* Properly close and free all devices. */
230 for (l = drvc->instances; l; l = l->next) {
231 if (!(sdi = l->data)) {
232 /* Log error, but continue cleaning up the rest. */
233 sr_err("%s: sdi was NULL, continuing", __func__);
237 if (!(devc = sdi->priv)) {
238 /* Log error, but continue cleaning up the rest. */
239 sr_err("%s: sdi->priv was NULL, continuing", __func__);
244 sr_serial_dev_inst_free(devc->serial);
245 sr_dev_inst_free(sdi);
247 g_slist_free(drvc->instances);
248 drvc->instances = NULL;
253 static int config_get(int id, const void **data, const struct sr_dev_inst *sdi)
255 struct dev_context *devc;
264 case SR_DI_TRIGGER_TYPES:
265 *data = (char *)TRIGGER_TYPES;
267 case SR_DI_CUR_SAMPLERATE:
270 *data = &devc->cur_samplerate;
281 static int config_set(int id, const void *value, const struct sr_dev_inst *sdi)
283 struct dev_context *devc;
285 const uint64_t *tmp_u64;
289 if (sdi->status != SR_ST_ACTIVE)
293 case SR_CONF_SAMPLERATE:
294 ret = ols_set_samplerate(sdi, *(const uint64_t *)value,
297 case SR_CONF_LIMIT_SAMPLES:
299 if (*tmp_u64 < MIN_NUM_SAMPLES)
301 if (*tmp_u64 > devc->max_samples)
302 sr_err("Sample limit exceeds hardware maximum.");
303 devc->limit_samples = *tmp_u64;
304 sr_info("Sample limit is %" PRIu64 ".", devc->limit_samples);
307 case SR_CONF_CAPTURE_RATIO:
308 devc->capture_ratio = *(const uint64_t *)value;
309 if (devc->capture_ratio < 0 || devc->capture_ratio > 100) {
310 devc->capture_ratio = 0;
316 if (GPOINTER_TO_INT(value)) {
317 sr_info("Enabling RLE.");
318 devc->flag_reg |= FLAG_RLE;
329 static int config_list(int key, const void **data, const struct sr_dev_inst *sdi)
335 case SR_CONF_SAMPLERATE:
336 *data = &samplerates;
345 static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
348 struct sr_datafeed_packet *packet;
349 struct sr_datafeed_header *header;
350 struct dev_context *devc;
351 uint32_t trigger_config[4];
353 uint16_t readcount, delaycount;
354 uint8_t changrp_mask;
360 if (sdi->status != SR_ST_ACTIVE)
363 if (ols_configure_probes(sdi) != SR_OK) {
364 sr_err("Failed to configure probes.");
369 * Enable/disable channel groups in the flag register according to the
370 * probe mask. Calculate this here, because num_channels is needed
371 * to limit readcount.
375 for (i = 0; i < 4; i++) {
376 if (devc->probe_mask & (0xff << (i * 8))) {
377 changrp_mask |= (1 << i);
383 * Limit readcount to prevent reading past the end of the hardware
386 readcount = MIN(devc->max_samples / num_channels, devc->limit_samples) / 4;
388 memset(trigger_config, 0, 16);
389 trigger_config[devc->num_stages - 1] |= 0x08;
390 if (devc->trigger_mask[0]) {
391 delaycount = readcount * (1 - devc->capture_ratio / 100.0);
392 devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages;
394 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_0,
395 reverse32(devc->trigger_mask[0])) != SR_OK)
397 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_0,
398 reverse32(devc->trigger_value[0])) != SR_OK)
400 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_0,
401 trigger_config[0]) != SR_OK)
404 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_1,
405 reverse32(devc->trigger_mask[1])) != SR_OK)
407 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_1,
408 reverse32(devc->trigger_value[1])) != SR_OK)
410 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_1,
411 trigger_config[1]) != SR_OK)
414 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_2,
415 reverse32(devc->trigger_mask[2])) != SR_OK)
417 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_2,
418 reverse32(devc->trigger_value[2])) != SR_OK)
420 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_2,
421 trigger_config[2]) != SR_OK)
424 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_3,
425 reverse32(devc->trigger_mask[3])) != SR_OK)
427 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_3,
428 reverse32(devc->trigger_value[3])) != SR_OK)
430 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_3,
431 trigger_config[3]) != SR_OK)
434 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_0,
435 devc->trigger_mask[0]) != SR_OK)
437 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_0,
438 devc->trigger_value[0]) != SR_OK)
440 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_0,
441 0x00000008) != SR_OK)
443 delaycount = readcount;
446 sr_info("Setting samplerate to %" PRIu64 "Hz (divider %u, "
447 "demux %s)", devc->cur_samplerate, devc->cur_samplerate_divider,
448 devc->flag_reg & FLAG_DEMUX ? "on" : "off");
449 if (send_longcommand(devc->serial, CMD_SET_DIVIDER,
450 reverse32(devc->cur_samplerate_divider)) != SR_OK)
453 /* Send sample limit and pre/post-trigger capture ratio. */
454 data = ((readcount - 1) & 0xffff) << 16;
455 data |= (delaycount - 1) & 0xffff;
456 if (send_longcommand(devc->serial, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK)
459 /* The flag register wants them here, and 1 means "disable channel". */
460 devc->flag_reg |= ~(changrp_mask << 2) & 0x3c;
461 devc->flag_reg |= FLAG_FILTER;
463 data = (devc->flag_reg << 24) | ((devc->flag_reg << 8) & 0xff0000);
464 if (send_longcommand(devc->serial, CMD_SET_FLAGS, data) != SR_OK)
467 /* Start acquisition on the device. */
468 if (send_shortcommand(devc->serial, CMD_RUN) != SR_OK)
471 sr_source_add(devc->serial->fd, G_IO_IN, -1, ols_receive_data,
474 if (!(packet = g_try_malloc(sizeof(struct sr_datafeed_packet)))) {
475 sr_err("Datafeed packet malloc failed.");
476 return SR_ERR_MALLOC;
479 if (!(header = g_try_malloc(sizeof(struct sr_datafeed_header)))) {
480 sr_err("Datafeed header malloc failed.");
482 return SR_ERR_MALLOC;
485 /* Send header packet to the session bus. */
486 packet->type = SR_DF_HEADER;
487 packet->payload = (unsigned char *)header;
488 header->feed_version = 1;
489 gettimeofday(&header->starttime, NULL);
490 sr_session_send(cb_data, packet);
498 /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */
499 static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
501 /* Avoid compiler warnings. */
504 abort_acquisition(sdi);
509 SR_PRIV struct sr_dev_driver ols_driver_info = {
511 .longname = "Openbench Logic Sniffer",
514 .cleanup = hw_cleanup,
516 .dev_list = hw_dev_list,
517 .dev_clear = hw_cleanup,
518 .config_get = config_get,
519 .config_set = config_set,
520 .config_list = config_list,
521 .dev_open = hw_dev_open,
522 .dev_close = hw_dev_close,
523 .dev_acquisition_start = hw_dev_acquisition_start,
524 .dev_acquisition_stop = hw_dev_acquisition_stop,