2 * This file is part of the sigrok project.
4 * Copyright (C) 2013 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
22 #define SERIALCOMM "115200/8n1"
24 static const int32_t hwopts[] = {
29 static const int32_t hwcaps[] = {
30 SR_CONF_LOGIC_ANALYZER,
32 SR_CONF_CAPTURE_RATIO,
33 SR_CONF_LIMIT_SAMPLES,
37 /* Probes are numbered 0-31 (on the PCB silkscreen). */
38 SR_PRIV const char *ols_probe_names[NUM_PROBES + 1] = {
39 "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12",
40 "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23",
41 "24", "25", "26", "27", "28", "29", "30", "31",
45 /* Default supported samplerates, can be overridden by device metadata. */
46 static const uint64_t samplerates[] = {
52 SR_PRIV struct sr_dev_driver ols_driver_info;
53 static struct sr_dev_driver *di = &ols_driver_info;
55 static int hw_init(struct sr_context *sr_ctx)
57 return std_hw_init(sr_ctx, di, DRIVER_LOG_DOMAIN);
60 static GSList *hw_scan(GSList *options)
62 struct sr_config *src;
63 struct sr_dev_inst *sdi;
64 struct drv_context *drvc;
65 struct dev_context *devc;
66 struct sr_probe *probe;
67 struct sr_serial_dev_inst *serial;
71 const char *conn, *serialcomm;
80 conn = serialcomm = NULL;
81 for (l = options; l; l = l->next) {
85 conn = g_variant_get_string(src->data, NULL);
87 case SR_CONF_SERIALCOMM:
88 serialcomm = g_variant_get_string(src->data, NULL);
95 if (serialcomm == NULL)
96 serialcomm = SERIALCOMM;
98 if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
101 /* The discovery procedure is like this: first send the Reset
102 * command (0x00) 5 times, since the device could be anywhere
103 * in a 5-byte command. Then send the ID command (0x02).
104 * If the device responds with 4 bytes ("OLS1" or "SLA1"), we
107 sr_info("Probing %s.", conn);
108 if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
112 for (i = 0; i < 5; i++) {
113 if ((ret = send_shortcommand(serial, CMD_RESET)) != SR_OK) {
114 sr_err("Port %s is not writable.", conn);
119 serial_close(serial);
120 sr_err("Could not use port %s. Quitting.", conn);
123 send_shortcommand(serial, CMD_ID);
125 /* Wait 10ms for a response. */
128 probefd.fd = serial->fd;
129 probefd.events = G_IO_IN;
130 g_poll(&probefd, 1, 1);
132 if (probefd.revents != G_IO_IN)
134 if (serial_read(serial, buf, 4) != 4)
136 if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4))
139 /* Definitely using the OLS protocol, check if it supports
140 * the metadata command.
142 send_shortcommand(serial, CMD_METADATA);
143 if (g_poll(&probefd, 1, 10) > 0) {
145 sdi = get_metadata(serial);
149 /* Not an OLS -- some other board that uses the sump protocol. */
150 sdi = sr_dev_inst_new(0, SR_ST_INACTIVE,
151 "Sump", "Logic Analyzer", "v1.0");
153 devc = ols_dev_new();
154 for (i = 0; i < 32; i++) {
155 if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
156 ols_probe_names[i])))
158 sdi->probes = g_slist_append(sdi->probes, probe);
162 devc->serial = serial;
163 drvc->instances = g_slist_append(drvc->instances, sdi);
164 devices = g_slist_append(devices, sdi);
166 serial_close(serial);
171 static GSList *hw_dev_list(void)
173 return ((struct drv_context *)(di->priv))->instances;
176 static int hw_dev_open(struct sr_dev_inst *sdi)
178 struct dev_context *devc;
182 if (serial_open(devc->serial, SERIAL_RDWR) != SR_OK)
185 sdi->status = SR_ST_ACTIVE;
190 static int hw_dev_close(struct sr_dev_inst *sdi)
192 struct dev_context *devc;
196 if (devc->serial && devc->serial->fd != -1) {
197 serial_close(devc->serial);
198 sdi->status = SR_ST_INACTIVE;
204 static int hw_cleanup(void)
207 struct sr_dev_inst *sdi;
208 struct drv_context *drvc;
209 struct dev_context *devc;
212 if (!(drvc = di->priv))
215 /* Properly close and free all devices. */
216 for (l = drvc->instances; l; l = l->next) {
217 if (!(sdi = l->data)) {
218 /* Log error, but continue cleaning up the rest. */
219 sr_err("%s: sdi was NULL, continuing", __func__);
223 if (!(devc = sdi->priv)) {
224 /* Log error, but continue cleaning up the rest. */
225 sr_err("%s: sdi->priv was NULL, continuing", __func__);
230 sr_serial_dev_inst_free(devc->serial);
231 sr_dev_inst_free(sdi);
233 g_slist_free(drvc->instances);
234 drvc->instances = NULL;
239 static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi)
241 struct dev_context *devc;
244 case SR_CONF_SAMPLERATE:
247 *data = g_variant_new_uint64(devc->cur_samplerate);
258 static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi)
260 struct dev_context *devc;
266 if (sdi->status != SR_ST_ACTIVE)
270 case SR_CONF_SAMPLERATE:
271 tmp_u64 = g_variant_get_uint64(data);
272 if (tmp_u64 < samplerates[0] || tmp_u64 > samplerates[1])
273 return SR_ERR_SAMPLERATE;
274 ret = ols_set_samplerate(sdi, g_variant_get_uint64(data));
276 case SR_CONF_LIMIT_SAMPLES:
277 tmp_u64 = g_variant_get_uint64(data);
278 if (tmp_u64 < MIN_NUM_SAMPLES)
280 if (tmp_u64 > devc->max_samples)
281 sr_err("Sample limit exceeds hardware maximum.");
282 devc->limit_samples = tmp_u64;
283 sr_info("Sample limit is %" PRIu64 ".", devc->limit_samples);
286 case SR_CONF_CAPTURE_RATIO:
287 devc->capture_ratio = g_variant_get_uint64(data);
288 if (devc->capture_ratio < 0 || devc->capture_ratio > 100) {
289 devc->capture_ratio = 0;
295 if (g_variant_get_boolean(data)) {
296 sr_info("Enabling RLE.");
297 devc->flag_reg |= FLAG_RLE;
299 sr_info("Disabling RLE.");
300 devc->flag_reg &= ~FLAG_RLE;
311 static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi)
319 case SR_CONF_SCAN_OPTIONS:
320 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
321 hwopts, ARRAY_SIZE(hwopts), sizeof(int32_t));
323 case SR_CONF_DEVICE_OPTIONS:
324 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
325 hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t));
327 case SR_CONF_SAMPLERATE:
328 g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
329 gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates,
330 ARRAY_SIZE(samplerates), sizeof(uint64_t));
331 g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar);
332 *data = g_variant_builder_end(&gvb);
334 case SR_CONF_TRIGGER_TYPE:
335 *data = g_variant_new_string(TRIGGER_TYPE);
344 static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
347 struct dev_context *devc;
348 uint32_t trigger_config[4];
350 uint16_t readcount, delaycount;
351 uint8_t changrp_mask;
357 if (sdi->status != SR_ST_ACTIVE)
360 if (ols_configure_probes(sdi) != SR_OK) {
361 sr_err("Failed to configure probes.");
366 * Enable/disable channel groups in the flag register according to the
367 * probe mask. Calculate this here, because num_channels is needed
368 * to limit readcount.
372 for (i = 0; i < 4; i++) {
373 if (devc->probe_mask & (0xff << (i * 8))) {
374 changrp_mask |= (1 << i);
380 * Limit readcount to prevent reading past the end of the hardware
383 readcount = MIN(devc->max_samples / num_channels, devc->limit_samples) / 4;
385 memset(trigger_config, 0, 16);
386 trigger_config[devc->num_stages - 1] |= 0x08;
387 if (devc->trigger_mask[0]) {
388 delaycount = readcount * (1 - devc->capture_ratio / 100.0);
389 devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages;
391 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_0,
392 reverse32(devc->trigger_mask[0])) != SR_OK)
394 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_0,
395 reverse32(devc->trigger_value[0])) != SR_OK)
397 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_0,
398 trigger_config[0]) != SR_OK)
401 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_1,
402 reverse32(devc->trigger_mask[1])) != SR_OK)
404 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_1,
405 reverse32(devc->trigger_value[1])) != SR_OK)
407 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_1,
408 trigger_config[1]) != SR_OK)
411 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_2,
412 reverse32(devc->trigger_mask[2])) != SR_OK)
414 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_2,
415 reverse32(devc->trigger_value[2])) != SR_OK)
417 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_2,
418 trigger_config[2]) != SR_OK)
421 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_3,
422 reverse32(devc->trigger_mask[3])) != SR_OK)
424 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_3,
425 reverse32(devc->trigger_value[3])) != SR_OK)
427 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_3,
428 trigger_config[3]) != SR_OK)
431 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_0,
432 devc->trigger_mask[0]) != SR_OK)
434 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_0,
435 devc->trigger_value[0]) != SR_OK)
437 if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_0,
438 0x00000008) != SR_OK)
440 delaycount = readcount;
443 sr_info("Setting samplerate to %" PRIu64 "Hz (divider %u, "
444 "demux %s)", devc->cur_samplerate, devc->cur_samplerate_divider,
445 devc->flag_reg & FLAG_DEMUX ? "on" : "off");
446 if (send_longcommand(devc->serial, CMD_SET_DIVIDER,
447 reverse32(devc->cur_samplerate_divider)) != SR_OK)
450 /* Send sample limit and pre/post-trigger capture ratio. */
451 data = ((readcount - 1) & 0xffff) << 16;
452 data |= (delaycount - 1) & 0xffff;
453 if (send_longcommand(devc->serial, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK)
456 /* The flag register wants them here, and 1 means "disable channel". */
457 devc->flag_reg |= ~(changrp_mask << 2) & 0x3c;
458 devc->flag_reg |= FLAG_FILTER;
460 data = (devc->flag_reg << 24) | ((devc->flag_reg << 8) & 0xff0000);
461 if (send_longcommand(devc->serial, CMD_SET_FLAGS, data) != SR_OK)
464 /* Start acquisition on the device. */
465 if (send_shortcommand(devc->serial, CMD_RUN) != SR_OK)
468 /* Send header packet to the session bus. */
469 std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN);
471 sr_source_add(devc->serial->fd, G_IO_IN, -1, ols_receive_data,
477 /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */
478 static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
480 /* Avoid compiler warnings. */
483 abort_acquisition(sdi);
488 SR_PRIV struct sr_dev_driver ols_driver_info = {
490 .longname = "Openbench Logic Sniffer",
493 .cleanup = hw_cleanup,
495 .dev_list = hw_dev_list,
496 .dev_clear = hw_cleanup,
497 .config_get = config_get,
498 .config_set = config_set,
499 .config_list = config_list,
500 .dev_open = hw_dev_open,
501 .dev_close = hw_dev_close,
502 .dev_acquisition_start = hw_dev_acquisition_start,
503 .dev_acquisition_stop = hw_dev_acquisition_stop,