2 * This file is part of the sigrok project.
4 * Copyright (C) 2012 Bert Vermeulen <bert@biot.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
21 #include <sys/types.h>
26 #include "libsigrok.h"
27 #include "libsigrok-internal.h"
28 #include "fluke-dmm.h"
30 static const int32_t hwopts[] = {
35 static const int32_t hwcaps[] = {
37 SR_CONF_LIMIT_SAMPLES,
42 SR_PRIV struct sr_dev_driver flukedmm_driver_info;
43 static struct sr_dev_driver *di = &flukedmm_driver_info;
45 static char *scan_conn[] = {
50 /* Scopemeter 190 series */
55 static const struct flukedmm_profile supported_flukedmm[] = {
56 { FLUKE_187, "187", 100, 1000 },
57 { FLUKE_287, "287", 100, 1000 },
58 { FLUKE_190, "199B", 1000, 3500 },
62 /* Properly close and free all devices. */
63 static int clear_instances(void)
65 struct sr_dev_inst *sdi;
66 struct drv_context *drvc;
67 struct dev_context *devc;
70 if (!(drvc = di->priv))
74 for (l = drvc->instances; l; l = l->next) {
77 if (!(devc = sdi->priv))
79 sr_serial_dev_inst_free(devc->serial);
80 sr_dev_inst_free(sdi);
82 g_slist_free(drvc->instances);
83 drvc->instances = NULL;
88 static int hw_init(struct sr_context *sr_ctx)
90 return std_hw_init(sr_ctx, di, DRIVER_LOG_DOMAIN);
93 static GSList *fluke_scan(const char *conn, const char *serialcomm)
95 struct sr_dev_inst *sdi;
96 struct drv_context *drvc;
97 struct dev_context *devc;
98 struct sr_probe *probe;
99 struct sr_serial_dev_inst *serial;
101 int retry, len, i, s;
102 char buf[128], *b, **tokens;
104 if (!(serial = sr_serial_dev_inst_new(conn, serialcomm)))
107 if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
114 /* We'll try the discovery sequence three times in case the device
115 * is not in an idle state when we send ID. */
116 while (!devices && retry < 3) {
118 serial_flush(serial);
119 if (serial_write(serial, "ID\r", 3) == -1) {
120 sr_err("Unable to send ID string: %s.",
125 /* Response is first a CMD_ACK byte (ASCII '0' for OK,
126 * or '1' to signify an error. */
128 serial_readline(serial, &b, &len, 150);
134 /* If CMD_ACK was OK, ID string follows. */
136 serial_readline(serial, &b, &len, 850);
139 if (strcspn(buf, ",") < 15)
140 /* Looks like it's comma-separated. */
141 tokens = g_strsplit(buf, ",", 3);
143 /* Fluke 199B, at least, uses semicolon. */
144 tokens = g_strsplit(buf, ";", 3);
145 if (!strncmp("FLUKE", tokens[0], 5)
146 && tokens[1] && tokens[2]) {
147 for (i = 0; supported_flukedmm[i].model; i++) {
148 if (strcmp(supported_flukedmm[i].modelname, tokens[0] + 6))
150 /* Skip leading spaces in version number. */
151 for (s = 0; tokens[1][s] == ' '; s++);
152 if (!(sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, "Fluke",
153 tokens[0] + 6, tokens[1] + s)))
155 if (!(devc = g_try_malloc0(sizeof(struct dev_context)))) {
156 sr_err("Device context malloc failed.");
159 devc->profile = &supported_flukedmm[i];
160 devc->serial = serial;
163 if (!(probe = sr_probe_new(0, SR_PROBE_ANALOG, TRUE, "P1")))
165 sdi->probes = g_slist_append(sdi->probes, probe);
166 drvc->instances = g_slist_append(drvc->instances, sdi);
167 devices = g_slist_append(devices, sdi);
176 serial_close(serial);
178 sr_serial_dev_inst_free(serial);
183 static GSList *hw_scan(GSList *options)
185 struct sr_config *src;
188 const char *conn, *serialcomm;
190 conn = serialcomm = NULL;
191 for (l = options; l; l = l->next) {
195 conn = g_variant_get_string(src->data, NULL);
197 case SR_CONF_SERIALCOMM:
198 serialcomm = g_variant_get_string(src->data, NULL);
206 /* Use the provided comm specs. */
207 devices = fluke_scan(conn, serialcomm);
209 for (i = 0; scan_conn[i]; i++) {
210 if ((devices = fluke_scan(conn, scan_conn[i])))
212 /* The Scopemeter 199B, at least, requires this
213 * after all the 115k/9.6k confusion. */
221 static GSList *hw_dev_list(void)
223 return ((struct drv_context *)(di->priv))->instances;
226 static int hw_dev_open(struct sr_dev_inst *sdi)
228 struct dev_context *devc;
230 if (!(devc = sdi->priv)) {
231 sr_err("sdi->priv was NULL.");
235 if (serial_open(devc->serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK)
238 sdi->status = SR_ST_ACTIVE;
243 static int hw_dev_close(struct sr_dev_inst *sdi)
245 struct dev_context *devc;
249 if (devc->serial && devc->serial->fd != -1) {
250 serial_close(devc->serial);
251 sdi->status = SR_ST_INACTIVE;
257 static int hw_cleanup(void)
265 static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi)
267 struct dev_context *devc;
269 if (sdi->status != SR_ST_ACTIVE)
272 if (!(devc = sdi->priv)) {
273 sr_err("sdi->priv was NULL.");
278 case SR_CONF_LIMIT_MSEC:
279 /* TODO: not yet implemented */
280 if (g_variant_get_uint64(data) == 0) {
281 sr_err("LIMIT_MSEC can't be 0.");
284 devc->limit_msec = g_variant_get_uint64(data);
285 sr_dbg("Setting time limit to %" PRIu64 "ms.",
288 case SR_CONF_LIMIT_SAMPLES:
289 devc->limit_samples = g_variant_get_uint64(data);
290 sr_dbg("Setting sample limit to %" PRIu64 ".",
291 devc->limit_samples);
300 static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi)
306 case SR_CONF_SCAN_OPTIONS:
307 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
308 hwopts, ARRAY_SIZE(hwopts), sizeof(int32_t));
310 case SR_CONF_DEVICE_OPTIONS:
311 *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
312 hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t));
321 static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi,
324 struct dev_context *devc;
326 if (!(devc = sdi->priv)) {
327 sr_err("sdi->priv was NULL.");
331 devc->cb_data = cb_data;
333 /* Send header packet to the session bus. */
334 std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN);
336 /* Poll every 100ms, or whenever some data comes in. */
337 sr_source_add(devc->serial->fd, G_IO_IN, 50, fluke_receive_data, (void *)sdi);
339 if (serial_write(devc->serial, "QM\r", 3) == -1) {
340 sr_err("Unable to send QM: %s.", strerror(errno));
343 devc->cmd_sent_at = g_get_monotonic_time() / 1000;
344 devc->expect_response = TRUE;
349 static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
351 return std_hw_dev_acquisition_stop_serial(sdi, cb_data, hw_dev_close,
352 ((struct dev_context *)(sdi->priv))->serial, DRIVER_LOG_DOMAIN);
355 SR_PRIV struct sr_dev_driver flukedmm_driver_info = {
357 .longname = "Fluke 18x/28x series DMMs",
360 .cleanup = hw_cleanup,
362 .dev_list = hw_dev_list,
363 .dev_clear = clear_instances,
365 .config_set = config_set,
366 .config_list = config_list,
367 .dev_open = hw_dev_open,
368 .dev_close = hw_dev_close,
369 .dev_acquisition_start = hw_dev_acquisition_start,
370 .dev_acquisition_stop = hw_dev_acquisition_stop,