2 * This file is part of the libsigrok project.
4 * Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com>
6 * This program is free software: you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation, either version 3 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program. If not, see <http://www.gnu.org/licenses/>.
23 SR_PRIV int sr_brymen_parse(const uint8_t *buf, float *floatval,
24 struct sr_datafeed_analog *analog, void *info);
26 static void handle_packet(const uint8_t *buf, struct sr_dev_inst *sdi)
29 struct dev_context *devc;
30 struct sr_datafeed_packet packet;
31 struct sr_datafeed_analog analog;
35 analog.num_samples = 1;
38 sr_brymen_parse(buf, &floatval, &analog, NULL);
39 analog.data = &floatval;
41 analog.probes = sdi->probes;
43 if (analog.mq != -1) {
44 /* Got a measurement. */
45 packet.type = SR_DF_ANALOG;
46 packet.payload = &analog;
47 sr_session_send(devc->cb_data, &packet);
52 static void handle_new_data(struct sr_dev_inst *sdi)
54 struct dev_context *devc;
55 int len, status, offset = 0;
59 /* Try to get as much data as the buffer can hold. */
60 len = DMM_BUFSIZE - devc->buflen;
61 len = serial_read(devc->serial, devc->buf + devc->buflen, len);
63 sr_err("Serial port read error: %d.", len);
67 status = PACKET_INVALID_HEADER;
69 /* Now look for packets in that data. */
70 while (status != PACKET_NEED_MORE_DATA) {
71 /* We don't have a header, look for one. */
72 if (devc->next_packet_len == 0) {
73 len = devc->buflen - offset;
74 status = brymen_packet_length(devc->buf + offset, &len);
75 if (status == PACKET_HEADER_OK) {
76 /* We know how large the packet will be. */
77 devc->next_packet_len = len;
78 } else if (status == PACKET_NEED_MORE_DATA) {
79 /* We didn't yet receive the full header. */
80 devc->next_packet_len = 0;
83 /* Invalid header. Move on. */
84 devc->next_packet_len = 0;
90 /* We know how the packet size, but did we receive all of it? */
91 if (devc->buflen - offset < devc->next_packet_len)
94 /* We should have a full packet here, so we can check it. */
95 if (brymen_packet_is_valid(devc->buf + offset)) {
96 handle_packet(devc->buf + offset, sdi);
97 offset += devc->next_packet_len;
102 /* We are done with this packet. Look for a new one. */
103 devc->next_packet_len = 0;
106 /* If we have any data left, move it to the beginning of our buffer. */
107 memmove(devc->buf, devc->buf + offset, devc->buflen - offset);
108 devc->buflen -= offset;
111 SR_PRIV int brymen_dmm_receive_data(int fd, int revents, void *cb_data)
113 struct sr_dev_inst *sdi;
114 struct dev_context *devc;
120 if (!(sdi = cb_data))
123 if (!(devc = sdi->priv))
126 if (revents == G_IO_IN) {
127 /* Serial data arrived. */
128 handle_new_data(sdi);
130 /* Timeout, send another packet request. */
131 if ((ret = brymen_packet_request(devc->serial)) < 0) {
132 sr_err("Failed to request packet: %d.", ret);
137 if (devc->limit_samples && devc->num_samples >= devc->limit_samples) {
138 sr_info("Requested number of samples reached, stopping.");
139 sdi->driver->dev_acquisition_stop(sdi, cb_data);
143 if (devc->limit_msec) {
144 time = (g_get_monotonic_time() - devc->starttime) / 1000;
145 if (time > (int64_t)devc->limit_msec) {
146 sr_info("Requested time limit reached, stopping.");
147 sdi->driver->dev_acquisition_stop(sdi, cb_data);
156 * Try to find a valid packet in a serial data stream.
158 * @param serial Previously initialized serial port structure.
159 * @param buf Buffer containing the bytes to write.
160 * @param buflen Size of the buffer.
161 * @param get_packet_size Callback that assesses the size of incoming packets.
162 * @param is_valid Callback that assesses whether the packet is valid or not.
163 * @param timeout_ms The timeout after which, if no packet is detected, to
165 * @param baudrate The baudrate of the serial port. This parameter is not
166 * critical, but it helps fine tune the serial port polling
169 * @return SR_OK if a valid packet is found within the given timeout,
170 * SR_ERR upon failure.
172 SR_PRIV int brymen_stream_detect(struct sr_serial_dev_inst *serial,
173 uint8_t *buf, size_t *buflen,
174 packet_length_t get_packet_size,
175 packet_valid_t is_valid,
176 uint64_t timeout_ms, int baudrate)
178 int64_t start, time, byte_delay_us;
179 size_t ibuf, i, maxlen;
180 int status, len, packet_len, stream_len;
184 sr_dbg("Detecting packets on FD %d (timeout = %" PRIu64
185 "ms, baudrate = %d).", serial->fd, timeout_ms, baudrate);
187 /* Assume 8n1 transmission. That is 10 bits for every byte. */
188 byte_delay_us = 10 * (1000000 / baudrate);
189 start = g_get_monotonic_time();
191 packet_len = i = ibuf = len = 0;
192 while (ibuf < maxlen) {
193 len = serial_read(serial, &buf[ibuf], maxlen - ibuf);
196 sr_spew("Read %d bytes.", len);
199 time = g_get_monotonic_time() - start;
202 stream_len = ibuf - i;
203 if (stream_len > 0 && packet_len == 0) {
204 /* How large of a packet are we expecting? */
205 packet_len = stream_len;
206 status = get_packet_size(&buf[i], &packet_len);
208 case PACKET_HEADER_OK:
209 /* We know how much data we need to wait for. */
211 case PACKET_NEED_MORE_DATA:
212 /* We did not receive the full header. */
215 case PACKET_INVALID_HEADER:
218 * We had enough data, but here was an error in
219 * parsing the header. Restart parsing from the
228 if ((stream_len >= packet_len) && (packet_len != 0)) {
229 /* We have at least a packet's worth of data. */
230 if (is_valid(&buf[i])) {
231 sr_spew("Found valid %d-byte packet after "
232 "%" PRIu64 "ms.", packet_len, time);
236 sr_spew("Got %d bytes, but not a valid "
237 "packet.", packet_len);
241 /* Not a valid packet. Continue searching. */
246 if (time >= (int64_t)timeout_ms) {
248 sr_dbg("Detection timed out after %dms.", time);
251 g_usleep(byte_delay_us);
255 sr_err("Didn't find a valid packet (read %d bytes).", ibuf);