]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2020 Florian Schmidt <schmidt_florian@gmx.de> | |
5 | * Copyright (C) 2013 Marcus Comstedt <marcus@mc.pp.se> | |
6 | * Copyright (C) 2013 Bert Vermeulen <bert@biot.com> | |
7 | * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk> | |
8 | * | |
9 | * This program is free software: you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License as published by | |
11 | * the Free Software Foundation, either version 3 of the License, or | |
12 | * (at your option) any later version. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
21 | */ | |
22 | ||
23 | /* | |
24 | * This driver implementation initially was derived from the | |
25 | * src/hardware/saleae-logic16/ source code. | |
26 | */ | |
27 | ||
28 | #include <config.h> | |
29 | ||
30 | #include <libsigrok/libsigrok.h> | |
31 | #include <string.h> | |
32 | ||
33 | #include "libsigrok-internal.h" | |
34 | #include "protocol.h" | |
35 | ||
36 | static const uint32_t scanopts[] = { | |
37 | SR_CONF_CONN, | |
38 | }; | |
39 | ||
40 | static const uint32_t drvopts[] = { | |
41 | SR_CONF_LOGIC_ANALYZER, | |
42 | SR_CONF_SIGNAL_GENERATOR, | |
43 | }; | |
44 | ||
45 | static const uint32_t devopts[] = { | |
46 | /* TODO: SR_CONF_CONTINUOUS, */ | |
47 | SR_CONF_CONN | SR_CONF_GET, | |
48 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
49 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
50 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
51 | #if WITH_THRESHOLD_DEVCFG | |
52 | SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
53 | #endif | |
54 | SR_CONF_TRIGGER_MATCH | SR_CONF_LIST, | |
55 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET, | |
56 | }; | |
57 | ||
58 | static const uint32_t devopts_cg_logic[] = { | |
59 | #if !WITH_THRESHOLD_DEVCFG | |
60 | SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
61 | #endif | |
62 | }; | |
63 | ||
64 | static const uint32_t devopts_cg_pwm[] = { | |
65 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
66 | SR_CONF_OUTPUT_FREQUENCY | SR_CONF_GET | SR_CONF_SET, | |
67 | SR_CONF_DUTY_CYCLE | SR_CONF_GET | SR_CONF_SET, | |
68 | }; | |
69 | ||
70 | static const int32_t trigger_matches[] = { | |
71 | SR_TRIGGER_ZERO, | |
72 | SR_TRIGGER_ONE, | |
73 | SR_TRIGGER_RISING, | |
74 | SR_TRIGGER_FALLING, | |
75 | }; | |
76 | ||
77 | static const char *channel_names_logic[] = { | |
78 | "CH0", "CH1", "CH2", "CH3", "CH4", "CH5", "CH6", "CH7", | |
79 | "CH8", "CH9", "CH10", "CH11", "CH12", "CH13", "CH14", "CH15", | |
80 | "CH16", "CH17", "CH18", "CH19", "CH20", "CH21", "CH22", "CH23", | |
81 | "CH24", "CH25", "CH26", "CH27", "CH28", "CH29", "CH30", "CH31", | |
82 | }; | |
83 | ||
84 | static const char *channel_names_pwm[] = { | |
85 | "PWM1", "PWM2", | |
86 | }; | |
87 | ||
88 | /* | |
89 | * The hardware uses a 100/200/500MHz base clock (model dependent) and | |
90 | * a 16bit divider (common across all models). The range from 10kHz to | |
91 | * 100/200/500MHz should be applicable to all devices. High rates may | |
92 | * suffer from coarse resolution (e.g. in the "500MHz div 2" case) and | |
93 | * may not provide the desired 1/2/5 steps. Fortunately this exclusively | |
94 | * affects the 500MHz model where 250MHz is used instead of 200MHz and | |
95 | * the 166MHz and 125MHz rates are not presented to users. Deep memory | |
96 | * of these models and hardware compression reduce the necessity to let | |
97 | * users pick from a huge list of possible rates. | |
98 | * | |
99 | */ | |
100 | ||
101 | static const uint64_t rates_500mhz[] = { | |
102 | SR_KHZ(10), | |
103 | SR_KHZ(20), | |
104 | SR_KHZ(50), | |
105 | SR_KHZ(100), | |
106 | SR_KHZ(200), | |
107 | SR_KHZ(500), | |
108 | SR_MHZ(1), | |
109 | SR_MHZ(2), | |
110 | SR_MHZ(5), | |
111 | SR_MHZ(10), | |
112 | SR_MHZ(20), | |
113 | SR_MHZ(50), | |
114 | SR_MHZ(100), | |
115 | SR_MHZ(250), | |
116 | SR_MHZ(500), | |
117 | }; | |
118 | ||
119 | static const uint64_t rates_200mhz[] = { | |
120 | SR_KHZ(10), | |
121 | SR_KHZ(20), | |
122 | SR_KHZ(50), | |
123 | SR_KHZ(100), | |
124 | SR_KHZ(200), | |
125 | SR_KHZ(500), | |
126 | SR_MHZ(1), | |
127 | SR_MHZ(2), | |
128 | SR_MHZ(5), | |
129 | SR_MHZ(10), | |
130 | SR_MHZ(20), | |
131 | SR_MHZ(50), | |
132 | SR_MHZ(100), | |
133 | SR_MHZ(200), | |
134 | }; | |
135 | ||
136 | static const uint64_t rates_100mhz[] = { | |
137 | SR_KHZ(10), | |
138 | SR_KHZ(20), | |
139 | SR_KHZ(50), | |
140 | SR_KHZ(100), | |
141 | SR_KHZ(200), | |
142 | SR_KHZ(500), | |
143 | SR_MHZ(1), | |
144 | SR_MHZ(2), | |
145 | SR_MHZ(5), | |
146 | SR_MHZ(10), | |
147 | SR_MHZ(20), | |
148 | SR_MHZ(50), | |
149 | SR_MHZ(100), | |
150 | }; | |
151 | ||
152 | /* | |
153 | * Only list a few discrete voltages, to form a useful set which covers | |
154 | * most logic families. Too many choices can make some applications use | |
155 | * a slider again. Which may lack a scale for the current value, and | |
156 | * leave users without feedback what the currently used value might be. | |
157 | */ | |
158 | static const double threshold_ranges[][2] = { | |
159 | { 0.4, 0.4, }, | |
160 | { 0.6, 0.6, }, | |
161 | { 0.9, 0.9, }, | |
162 | { 1.2, 1.2, }, | |
163 | { 1.4, 1.4, }, /* Default, 1.4V, index 4. */ | |
164 | { 2.0, 2.0, }, | |
165 | { 2.5, 2.5, }, | |
166 | { 4.0, 4.0, }, | |
167 | }; | |
168 | #define LOGIC_THRESHOLD_IDX_DFLT 4 | |
169 | ||
170 | static double threshold_voltage(const struct sr_dev_inst *sdi, double *high) | |
171 | { | |
172 | struct dev_context *devc; | |
173 | size_t idx; | |
174 | double voltage; | |
175 | ||
176 | devc = sdi->priv; | |
177 | idx = devc->threshold_voltage_idx; | |
178 | voltage = threshold_ranges[idx][0]; | |
179 | if (high) | |
180 | *high = threshold_ranges[idx][1]; | |
181 | ||
182 | return voltage; | |
183 | } | |
184 | ||
185 | /* Convenience. Release an allocated devc from error paths. */ | |
186 | static void kingst_la2016_free_devc(struct dev_context *devc) | |
187 | { | |
188 | if (!devc) | |
189 | return; | |
190 | g_free(devc->mcu_firmware); | |
191 | g_free(devc->fpga_bitstream); | |
192 | g_free(devc); | |
193 | } | |
194 | ||
195 | /* Convenience. Release an allocated sdi from error paths. */ | |
196 | static void kingst_la2016_free_sdi(struct sr_dev_inst *sdi) | |
197 | { | |
198 | if (!sdi) | |
199 | return; | |
200 | g_free(sdi->vendor); | |
201 | g_free(sdi->model); | |
202 | g_free(sdi->version); | |
203 | g_free(sdi->serial_num); | |
204 | g_free(sdi->connection_id); | |
205 | sr_usb_dev_inst_free(sdi->conn); | |
206 | kingst_la2016_free_devc(sdi->priv); | |
207 | } | |
208 | ||
209 | /* Convenience. Open a USB device (including claiming an interface). */ | |
210 | static int la2016_open_usb(struct sr_usb_dev_inst *usb, | |
211 | libusb_device *dev, gboolean show_message) | |
212 | { | |
213 | int ret; | |
214 | ||
215 | ret = libusb_open(dev, &usb->devhdl); | |
216 | if (ret != 0) { | |
217 | if (show_message) { | |
218 | sr_err("Cannot open device: %s.", | |
219 | libusb_error_name(ret)); | |
220 | } | |
221 | return SR_ERR_IO; | |
222 | } | |
223 | ||
224 | if (usb->address == 0xff) { | |
225 | /* | |
226 | * First encounter after firmware upload. | |
227 | * Grab current address after enumeration. | |
228 | */ | |
229 | usb->address = libusb_get_device_address(dev); | |
230 | } | |
231 | ||
232 | ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE); | |
233 | if (ret == LIBUSB_ERROR_BUSY) { | |
234 | sr_err("Cannot claim USB interface. Another program or driver using it?"); | |
235 | return SR_ERR_IO; | |
236 | } else if (ret == LIBUSB_ERROR_NO_DEVICE) { | |
237 | sr_err("Device has been disconnected."); | |
238 | return SR_ERR_IO; | |
239 | } else if (ret != 0) { | |
240 | sr_err("Cannot claim USB interface: %s.", | |
241 | libusb_error_name(ret)); | |
242 | return SR_ERR_IO; | |
243 | } | |
244 | ||
245 | return SR_OK; | |
246 | } | |
247 | ||
248 | /* Convenience. Close an opened USB device (and release the interface). */ | |
249 | static void la2016_close_usb(struct sr_usb_dev_inst *usb) | |
250 | { | |
251 | ||
252 | if (!usb) | |
253 | return; | |
254 | ||
255 | if (usb->devhdl) { | |
256 | libusb_release_interface(usb->devhdl, USB_INTERFACE); | |
257 | libusb_close(usb->devhdl); | |
258 | usb->devhdl = NULL; | |
259 | } | |
260 | } | |
261 | ||
262 | /* Communicate to an USB device to identify the Kingst LA model. */ | |
263 | static int la2016_identify_read(struct sr_dev_inst *sdi, | |
264 | struct sr_usb_dev_inst *usb, libusb_device *dev, | |
265 | gboolean show_message) | |
266 | { | |
267 | int ret; | |
268 | ||
269 | ret = la2016_open_usb(usb, dev, show_message); | |
270 | if (ret != SR_OK) { | |
271 | if (show_message) | |
272 | sr_err("Cannot communicate to MCU firmware."); | |
273 | return ret; | |
274 | } | |
275 | ||
276 | /* | |
277 | * Also complete the hardware configuration (FPGA bitstream) | |
278 | * when MCU firmware communication became operational. Either | |
279 | * failure is considered fatal when probing for the device. | |
280 | */ | |
281 | ret = la2016_identify_device(sdi, show_message); | |
282 | if (ret == SR_OK) { | |
283 | ret = la2016_init_hardware(sdi); | |
284 | } | |
285 | ||
286 | la2016_close_usb(usb); | |
287 | ||
288 | return ret; | |
289 | } | |
290 | ||
291 | /* Find given conn_id in another USB enum. Identify Kingst LA model. */ | |
292 | static int la2016_identify_enum(struct sr_dev_inst *sdi) | |
293 | { | |
294 | struct sr_dev_driver *di; | |
295 | struct drv_context *drvc; | |
296 | struct sr_context *ctx; | |
297 | libusb_device **devlist, *dev; | |
298 | struct libusb_device_descriptor des; | |
299 | int ret, id_ret; | |
300 | size_t device_count, dev_idx; | |
301 | char conn_id[64]; | |
302 | ||
303 | di = sdi->driver; | |
304 | drvc = di->context; | |
305 | ctx = drvc->sr_ctx;; | |
306 | ||
307 | ret = libusb_get_device_list(ctx->libusb_ctx, &devlist); | |
308 | if (ret < 0) | |
309 | return SR_ERR_IO; | |
310 | device_count = ret; | |
311 | if (!device_count) | |
312 | return SR_ERR_IO; | |
313 | id_ret = SR_ERR_IO; | |
314 | for (dev_idx = 0; dev_idx < device_count; dev_idx++) { | |
315 | dev = devlist[dev_idx]; | |
316 | libusb_get_device_descriptor(dev, &des); | |
317 | if (des.idVendor != LA2016_VID || des.idProduct != LA2016_PID) | |
318 | continue; | |
319 | if (des.iProduct != LA2016_IPRODUCT_INDEX) | |
320 | continue; | |
321 | ret = usb_get_port_path(dev, conn_id, sizeof(conn_id)); | |
322 | if (ret < 0) | |
323 | continue; | |
324 | if (strcmp(sdi->connection_id, conn_id) != 0) | |
325 | continue; | |
326 | id_ret = la2016_identify_read(sdi, sdi->conn, dev, FALSE); | |
327 | break; | |
328 | } | |
329 | libusb_free_device_list(devlist, 1); | |
330 | ||
331 | return id_ret; | |
332 | } | |
333 | ||
334 | /* Wait for a device to re-appear after firmware upload. */ | |
335 | static int la2016_identify_wait(struct sr_dev_inst *sdi) | |
336 | { | |
337 | struct dev_context *devc; | |
338 | uint64_t reset_done, now, elapsed_ms; | |
339 | int ret; | |
340 | ||
341 | devc = sdi->priv; | |
342 | ||
343 | sr_info("Waiting for device to reset after firmware upload."); | |
344 | now = g_get_monotonic_time(); | |
345 | reset_done = devc->fw_uploaded + RENUM_GONE_DELAY_MS * 1000; | |
346 | if (now < reset_done) | |
347 | g_usleep(reset_done - now); | |
348 | do { | |
349 | now = g_get_monotonic_time(); | |
350 | elapsed_ms = (now - devc->fw_uploaded) / 1000; | |
351 | sr_spew("Waited %" PRIu64 "ms.", elapsed_ms); | |
352 | ret = la2016_identify_enum(sdi); | |
353 | if (ret == SR_OK) { | |
354 | devc->fw_uploaded = 0; | |
355 | break; | |
356 | } | |
357 | g_usleep(RENUM_POLL_INTERVAL_MS * 1000); | |
358 | } while (elapsed_ms < RENUM_CHECK_PERIOD_MS); | |
359 | if (ret != SR_OK) { | |
360 | sr_err("Device failed to re-enumerate."); | |
361 | return ret; | |
362 | } | |
363 | sr_info("Device came back after %" PRIi64 "ms.", elapsed_ms); | |
364 | ||
365 | return SR_OK; | |
366 | } | |
367 | ||
368 | /* | |
369 | * Open given conn_id from another USB enum. Used by dev_open(). Similar | |
370 | * to, and should be kept in sync with la2016_identify_enum(). | |
371 | */ | |
372 | static int la2016_open_enum(struct sr_dev_inst *sdi) | |
373 | { | |
374 | struct sr_dev_driver *di; | |
375 | struct drv_context *drvc; | |
376 | struct sr_context *ctx; | |
377 | libusb_device **devlist, *dev; | |
378 | struct libusb_device_descriptor des; | |
379 | int ret, open_ret; | |
380 | size_t device_count, dev_idx; | |
381 | char conn_id[64]; | |
382 | ||
383 | di = sdi->driver; | |
384 | drvc = di->context; | |
385 | ctx = drvc->sr_ctx;; | |
386 | ||
387 | ret = libusb_get_device_list(ctx->libusb_ctx, &devlist); | |
388 | if (ret < 0) | |
389 | return SR_ERR_IO; | |
390 | device_count = ret; | |
391 | if (!device_count) | |
392 | return SR_ERR_IO; | |
393 | open_ret = SR_ERR_IO; | |
394 | for (dev_idx = 0; dev_idx < device_count; dev_idx++) { | |
395 | dev = devlist[dev_idx]; | |
396 | libusb_get_device_descriptor(dev, &des); | |
397 | if (des.idVendor != LA2016_VID || des.idProduct != LA2016_PID) | |
398 | continue; | |
399 | if (des.iProduct != LA2016_IPRODUCT_INDEX) | |
400 | continue; | |
401 | ret = usb_get_port_path(dev, conn_id, sizeof(conn_id)); | |
402 | if (ret < 0) | |
403 | continue; | |
404 | if (strcmp(sdi->connection_id, conn_id) != 0) | |
405 | continue; | |
406 | open_ret = la2016_open_usb(sdi->conn, dev, TRUE); | |
407 | break; | |
408 | } | |
409 | libusb_free_device_list(devlist, 1); | |
410 | ||
411 | return open_ret; | |
412 | } | |
413 | ||
414 | static GSList *scan(struct sr_dev_driver *di, GSList *options) | |
415 | { | |
416 | struct drv_context *drvc; | |
417 | struct sr_context *ctx; | |
418 | struct dev_context *devc; | |
419 | struct sr_dev_inst *sdi; | |
420 | struct sr_usb_dev_inst *usb; | |
421 | struct sr_config *src; | |
422 | GSList *l; | |
423 | GSList *devices, *found_devices, *renum_devices; | |
424 | GSList *conn_devices; | |
425 | struct libusb_device_descriptor des; | |
426 | libusb_device **devlist, *dev; | |
427 | size_t dev_count, dev_idx, ch_idx; | |
428 | uint8_t bus, addr; | |
429 | uint16_t pid; | |
430 | const char *conn; | |
431 | char conn_id[64]; | |
432 | int ret; | |
433 | size_t ch_off, ch_max; | |
434 | struct sr_channel *ch; | |
435 | struct sr_channel_group *cg; | |
436 | ||
437 | drvc = di->context; | |
438 | ctx = drvc->sr_ctx;; | |
439 | ||
440 | conn = NULL; | |
441 | conn_devices = NULL; | |
442 | for (l = options; l; l = l->next) { | |
443 | src = l->data; | |
444 | switch (src->key) { | |
445 | case SR_CONF_CONN: | |
446 | conn = g_variant_get_string(src->data, NULL); | |
447 | break; | |
448 | } | |
449 | } | |
450 | if (conn) | |
451 | conn_devices = sr_usb_find(ctx->libusb_ctx, conn); | |
452 | if (conn && !conn_devices) { | |
453 | sr_err("Cannot find the specified connection '%s'.", conn); | |
454 | return NULL; | |
455 | } | |
456 | ||
457 | /* | |
458 | * Find all LA2016 devices, optionally upload firmware to them. | |
459 | * Defer completion of sdi/devc creation until all (selected) | |
460 | * devices were found in a usable state, and their models got | |
461 | * identified which affect their feature set. It appears that | |
462 | * we cannot communicate to the device within the same USB enum | |
463 | * cycle, needs another USB enumeration after firmware upload. | |
464 | */ | |
465 | devices = NULL; | |
466 | found_devices = NULL; | |
467 | renum_devices = NULL; | |
468 | ret = libusb_get_device_list(ctx->libusb_ctx, &devlist); | |
469 | if (ret < 0) { | |
470 | sr_err("Cannot get device list: %s.", libusb_error_name(ret)); | |
471 | return devices; | |
472 | } | |
473 | dev_count = ret; | |
474 | for (dev_idx = 0; dev_idx < dev_count; dev_idx++) { | |
475 | dev = devlist[dev_idx]; | |
476 | bus = libusb_get_bus_number(dev); | |
477 | addr = libusb_get_device_address(dev); | |
478 | ||
479 | /* Filter by connection when externally specified. */ | |
480 | for (l = conn_devices; l; l = l->next) { | |
481 | usb = l->data; | |
482 | if (usb->bus == bus && usb->address == addr) | |
483 | break; | |
484 | } | |
485 | if (conn_devices && !l) { | |
486 | sr_spew("Bus %hhu, addr %hhu do not match specified filter.", | |
487 | bus, addr); | |
488 | continue; | |
489 | } | |
490 | ||
491 | /* Check USB VID:PID. Get the connection string. */ | |
492 | libusb_get_device_descriptor(dev, &des); | |
493 | if (des.idVendor != LA2016_VID || des.idProduct != LA2016_PID) | |
494 | continue; | |
495 | pid = des.idProduct; | |
496 | ret = usb_get_port_path(dev, conn_id, sizeof(conn_id)); | |
497 | if (ret < 0) | |
498 | continue; | |
499 | sr_dbg("USB enum found %04x:%04x at path %s, %d.%d.", | |
500 | des.idVendor, des.idProduct, conn_id, bus, addr); | |
501 | usb = sr_usb_dev_inst_new(bus, addr, NULL); | |
502 | ||
503 | sdi = g_malloc0(sizeof(*sdi)); | |
504 | sdi->driver = di; | |
505 | sdi->status = SR_ST_INITIALIZING; | |
506 | sdi->inst_type = SR_INST_USB; | |
507 | sdi->connection_id = g_strdup(conn_id); | |
508 | sdi->conn = usb; | |
509 | ||
510 | devc = g_malloc0(sizeof(*devc)); | |
511 | sdi->priv = devc; | |
512 | ||
513 | /* | |
514 | * Load MCU firmware if it is currently missing. Which | |
515 | * makes the device disappear and renumerate in USB. | |
516 | * We need to come back another time to communicate to | |
517 | * this device. | |
518 | */ | |
519 | devc->fw_uploaded = 0; | |
520 | devc->usb_pid = pid; | |
521 | if (des.iProduct != LA2016_IPRODUCT_INDEX) { | |
522 | sr_info("Uploading MCU firmware to '%s'.", conn_id); | |
523 | ret = la2016_upload_firmware(sdi, ctx, dev, FALSE); | |
524 | if (ret != SR_OK) { | |
525 | sr_err("MCU firmware upload failed."); | |
526 | kingst_la2016_free_sdi(sdi); | |
527 | continue; | |
528 | } | |
529 | devc->fw_uploaded = g_get_monotonic_time(); | |
530 | usb->address = 0xff; | |
531 | renum_devices = g_slist_append(renum_devices, sdi); | |
532 | continue; | |
533 | } else { | |
534 | ret = la2016_upload_firmware(sdi, NULL, NULL, TRUE); | |
535 | if (ret != SR_OK) { | |
536 | sr_err("MCU firmware filename check failed."); | |
537 | kingst_la2016_free_sdi(sdi); | |
538 | continue; | |
539 | } | |
540 | } | |
541 | ||
542 | /* | |
543 | * Communicate to the MCU firmware to access EEPROM data | |
544 | * which lets us identify the device type. Then stop, to | |
545 | * share remaining sdi/devc creation with those devices | |
546 | * which had their MCU firmware uploaded above and which | |
547 | * get revisited later. | |
548 | */ | |
549 | ret = la2016_identify_read(sdi, usb, dev, TRUE); | |
550 | if (ret != SR_OK || !devc->model) { | |
551 | sr_err("Unknown or unsupported device type."); | |
552 | kingst_la2016_free_sdi(sdi); | |
553 | continue; | |
554 | } | |
555 | found_devices = g_slist_append(found_devices, sdi); | |
556 | } | |
557 | libusb_free_device_list(devlist, 1); | |
558 | g_slist_free_full(conn_devices, sr_usb_dev_inst_free_cb); | |
559 | ||
560 | /* | |
561 | * Wait for devices to re-appear after firmware upload. Append | |
562 | * the yet unidentified device to the list of found devices, or | |
563 | * release the previously allocated sdi/devc. | |
564 | */ | |
565 | for (l = renum_devices; l; l = l->next) { | |
566 | sdi = l->data; | |
567 | devc = sdi->priv; | |
568 | ret = la2016_identify_wait(sdi); | |
569 | if (ret != SR_OK || !devc->model) { | |
570 | sr_dbg("Skipping unusable '%s'.", sdi->connection_id); | |
571 | kingst_la2016_free_sdi(sdi); | |
572 | continue; | |
573 | } | |
574 | found_devices = g_slist_append(found_devices, sdi); | |
575 | } | |
576 | g_slist_free(renum_devices); | |
577 | ||
578 | /* | |
579 | * All found devices got identified, their type is known here. | |
580 | * Complete the sdi/devc creation. Assign default settings | |
581 | * because the vendor firmware would not let us read back the | |
582 | * previously written configuration. | |
583 | */ | |
584 | for (l = found_devices; l; l = l->next) { | |
585 | sdi = l->data; | |
586 | devc = sdi->priv; | |
587 | ||
588 | sdi->vendor = g_strdup("Kingst"); | |
589 | sdi->model = g_strdup(devc->model->name); | |
590 | ch_off = 0; | |
591 | ||
592 | /* Create the "Logic" channel group. */ | |
593 | ch_max = ARRAY_SIZE(channel_names_logic); | |
594 | if (ch_max > devc->model->channel_count) | |
595 | ch_max = devc->model->channel_count; | |
596 | cg = sr_channel_group_new(sdi, "Logic", NULL); | |
597 | devc->cg_logic = cg; | |
598 | for (ch_idx = 0; ch_idx < ch_max; ch_idx++) { | |
599 | ch = sr_channel_new(sdi, ch_off, | |
600 | SR_CHANNEL_LOGIC, TRUE, | |
601 | channel_names_logic[ch_idx]); | |
602 | ch_off++; | |
603 | cg->channels = g_slist_append(cg->channels, ch); | |
604 | } | |
605 | ||
606 | /* Create the "PWMx" channel groups. */ | |
607 | ch_max = ARRAY_SIZE(channel_names_pwm); | |
608 | for (ch_idx = 0; ch_idx < ch_max; ch_idx++) { | |
609 | const char *name; | |
610 | name = channel_names_pwm[ch_idx]; | |
611 | cg = sr_channel_group_new(sdi, name, NULL); | |
612 | if (!devc->cg_pwm) | |
613 | devc->cg_pwm = cg; | |
614 | ch = sr_channel_new(sdi, ch_off, | |
615 | SR_CHANNEL_ANALOG, FALSE, name); | |
616 | ch_off++; | |
617 | cg->channels = g_slist_append(cg->channels, ch); | |
618 | } | |
619 | ||
620 | /* | |
621 | * Ideally we'd get the previous configuration from the | |
622 | * hardware, but this device is write-only. So we have | |
623 | * to assign a fixed set of initial configuration values. | |
624 | */ | |
625 | sr_sw_limits_init(&devc->sw_limits); | |
626 | devc->sw_limits.limit_samples = 0; | |
627 | devc->capture_ratio = 50; | |
628 | devc->samplerate = devc->model->samplerate; | |
629 | devc->threshold_voltage_idx = LOGIC_THRESHOLD_IDX_DFLT; | |
630 | if (ARRAY_SIZE(devc->pwm_setting) >= 1) { | |
631 | devc->pwm_setting[0].enabled = FALSE; | |
632 | devc->pwm_setting[0].freq = SR_KHZ(1); | |
633 | devc->pwm_setting[0].duty = 50; | |
634 | } | |
635 | if (ARRAY_SIZE(devc->pwm_setting) >= 2) { | |
636 | devc->pwm_setting[1].enabled = FALSE; | |
637 | devc->pwm_setting[1].freq = SR_KHZ(100); | |
638 | devc->pwm_setting[1].duty = 50; | |
639 | } | |
640 | ||
641 | sdi->status = SR_ST_INACTIVE; | |
642 | devices = g_slist_append(devices, sdi); | |
643 | } | |
644 | g_slist_free(found_devices); | |
645 | ||
646 | return std_scan_complete(di, devices); | |
647 | } | |
648 | ||
649 | static int dev_open(struct sr_dev_inst *sdi) | |
650 | { | |
651 | struct dev_context *devc; | |
652 | int ret; | |
653 | size_t ch; | |
654 | ||
655 | devc = sdi->priv; | |
656 | ||
657 | ret = la2016_open_enum(sdi); | |
658 | if (ret != SR_OK) { | |
659 | sr_err("Cannot open device."); | |
660 | return ret; | |
661 | } | |
662 | ||
663 | /* Send most recent PWM configuration to the device. */ | |
664 | for (ch = 0; ch < ARRAY_SIZE(devc->pwm_setting); ch++) { | |
665 | ret = la2016_write_pwm_config(sdi, ch); | |
666 | if (ret != SR_OK) | |
667 | return ret; | |
668 | } | |
669 | ||
670 | return SR_OK; | |
671 | } | |
672 | ||
673 | static int dev_close(struct sr_dev_inst *sdi) | |
674 | { | |
675 | struct sr_usb_dev_inst *usb; | |
676 | ||
677 | usb = sdi->conn; | |
678 | ||
679 | if (!usb->devhdl) | |
680 | return SR_ERR_BUG; | |
681 | ||
682 | if (WITH_DEINIT_IN_CLOSE) | |
683 | la2016_deinit_hardware(sdi); | |
684 | ||
685 | sr_info("Closing device on %d.%d (logical) / %s (physical) interface %d.", | |
686 | usb->bus, usb->address, sdi->connection_id, USB_INTERFACE); | |
687 | la2016_close_usb(sdi->conn); | |
688 | ||
689 | return SR_OK; | |
690 | } | |
691 | ||
692 | /* Config API helper. Get type and index of a channel group. */ | |
693 | static int get_cg_index(const struct sr_dev_inst *sdi, | |
694 | const struct sr_channel_group *cg, | |
695 | int *type, size_t *logic, size_t *analog) | |
696 | { | |
697 | struct dev_context *devc; | |
698 | GSList *l; | |
699 | size_t idx; | |
700 | ||
701 | /* Preset return values. */ | |
702 | if (type) | |
703 | *type = 0; | |
704 | if (logic) | |
705 | *logic = 0; | |
706 | if (analog) | |
707 | *analog = 0; | |
708 | ||
709 | /* Start categorizing the received cg. */ | |
710 | if (!sdi) | |
711 | return SR_ERR_ARG; | |
712 | devc = sdi->priv; | |
713 | if (!cg) | |
714 | return SR_OK; | |
715 | l = sdi->channel_groups; | |
716 | ||
717 | /* First sdi->channelgroups item is "Logic". */ | |
718 | if (!l) | |
719 | return SR_ERR_BUG; | |
720 | if (cg == l->data) { | |
721 | if (type) | |
722 | *type = SR_CHANNEL_LOGIC; | |
723 | if (logic) | |
724 | *logic = 0; | |
725 | return SR_OK; | |
726 | } | |
727 | l = l->next; | |
728 | ||
729 | /* Next sdi->channelgroups items are "PWMx". */ | |
730 | idx = 0; | |
731 | while (l && l->data != cg) { | |
732 | idx++; | |
733 | l = l->next; | |
734 | } | |
735 | if (l && idx < ARRAY_SIZE(devc->pwm_setting)) { | |
736 | if (type) | |
737 | *type = SR_CHANNEL_ANALOG; | |
738 | if (analog) | |
739 | *analog = idx; | |
740 | return SR_OK; | |
741 | } | |
742 | ||
743 | return SR_ERR_ARG; | |
744 | } | |
745 | ||
746 | static int config_get(uint32_t key, GVariant **data, | |
747 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
748 | { | |
749 | struct dev_context *devc; | |
750 | int ret, cg_type; | |
751 | size_t logic_idx, analog_idx; | |
752 | struct pwm_setting *pwm; | |
753 | struct sr_usb_dev_inst *usb; | |
754 | double voltage, rounded; | |
755 | ||
756 | (void)rounded; | |
757 | (void)voltage; | |
758 | ||
759 | if (!sdi) | |
760 | return SR_ERR_ARG; | |
761 | devc = sdi->priv; | |
762 | ||
763 | /* Check for types (and index) of channel groups. */ | |
764 | ret = get_cg_index(sdi, cg, &cg_type, &logic_idx, &analog_idx); | |
765 | if (cg && ret != SR_OK) | |
766 | return SR_ERR_ARG; | |
767 | ||
768 | /* Handle requests for the "Logic" channel group. */ | |
769 | if (cg && cg_type == SR_CHANNEL_LOGIC) { | |
770 | switch (key) { | |
771 | #if !WITH_THRESHOLD_DEVCFG | |
772 | case SR_CONF_VOLTAGE_THRESHOLD: | |
773 | voltage = threshold_voltage(sdi, NULL); | |
774 | *data = std_gvar_tuple_double(voltage, voltage); | |
775 | break; | |
776 | #endif /* WITH_THRESHOLD_DEVCFG */ | |
777 | default: | |
778 | return SR_ERR_NA; | |
779 | } | |
780 | return SR_OK; | |
781 | } | |
782 | ||
783 | /* Handle requests for the "PWMx" channel groups. */ | |
784 | if (cg && cg_type == SR_CHANNEL_ANALOG) { | |
785 | pwm = &devc->pwm_setting[analog_idx]; | |
786 | switch (key) { | |
787 | case SR_CONF_ENABLED: | |
788 | *data = g_variant_new_boolean(pwm->enabled); | |
789 | break; | |
790 | case SR_CONF_OUTPUT_FREQUENCY: | |
791 | *data = g_variant_new_double(pwm->freq); | |
792 | break; | |
793 | case SR_CONF_DUTY_CYCLE: | |
794 | *data = g_variant_new_double(pwm->duty); | |
795 | break; | |
796 | default: | |
797 | return SR_ERR_NA; | |
798 | } | |
799 | return SR_OK; | |
800 | } | |
801 | ||
802 | switch (key) { | |
803 | case SR_CONF_CONN: | |
804 | usb = sdi->conn; | |
805 | *data = g_variant_new_printf("%d.%d", usb->bus, usb->address); | |
806 | break; | |
807 | case SR_CONF_SAMPLERATE: | |
808 | *data = g_variant_new_uint64(devc->samplerate); | |
809 | break; | |
810 | case SR_CONF_LIMIT_SAMPLES: | |
811 | case SR_CONF_LIMIT_MSEC: | |
812 | return sr_sw_limits_config_get(&devc->sw_limits, key, data); | |
813 | case SR_CONF_CAPTURE_RATIO: | |
814 | *data = g_variant_new_uint64(devc->capture_ratio); | |
815 | break; | |
816 | #if WITH_THRESHOLD_DEVCFG | |
817 | case SR_CONF_VOLTAGE_THRESHOLD: | |
818 | voltage = threshold_voltage(sdi, NULL); | |
819 | *data = std_gvar_tuple_double(voltage, voltage); | |
820 | break; | |
821 | #endif /* WITH_THRESHOLD_DEVCFG */ | |
822 | default: | |
823 | return SR_ERR_NA; | |
824 | } | |
825 | ||
826 | return SR_OK; | |
827 | } | |
828 | ||
829 | static int config_set(uint32_t key, GVariant *data, | |
830 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
831 | { | |
832 | struct dev_context *devc; | |
833 | int ret, cg_type; | |
834 | size_t logic_idx, analog_idx; | |
835 | struct pwm_setting *pwm; | |
836 | double value_f; | |
837 | int idx; | |
838 | ||
839 | devc = sdi->priv; | |
840 | ||
841 | /* Check for types (and index) of channel groups. */ | |
842 | ret = get_cg_index(sdi, cg, &cg_type, &logic_idx, &analog_idx); | |
843 | if (cg && ret != SR_OK) | |
844 | return SR_ERR_ARG; | |
845 | ||
846 | /* Handle requests for the "Logic" channel group. */ | |
847 | if (cg && cg_type == SR_CHANNEL_LOGIC) { | |
848 | switch (key) { | |
849 | #if !WITH_THRESHOLD_DEVCFG | |
850 | case SR_CONF_LOGIC_THRESHOLD: | |
851 | idx = std_double_tuple_idx(data, | |
852 | ARRAY_AND_SIZE(threshold_ranges)); | |
853 | if (idx < 0) | |
854 | return SR_ERR_ARG; | |
855 | devc->threshold_voltage_idx = idx; | |
856 | break; | |
857 | #endif /* WITH_THRESHOLD_DEVCFG */ | |
858 | default: | |
859 | return SR_ERR_NA; | |
860 | } | |
861 | return SR_OK; | |
862 | } | |
863 | ||
864 | /* Handle requests for the "PWMx" channel groups. */ | |
865 | if (cg && cg_type == SR_CHANNEL_ANALOG) { | |
866 | pwm = &devc->pwm_setting[analog_idx]; | |
867 | switch (key) { | |
868 | case SR_CONF_ENABLED: | |
869 | pwm->enabled = g_variant_get_boolean(data); | |
870 | ret = la2016_write_pwm_config(sdi, analog_idx); | |
871 | if (ret != SR_OK) | |
872 | return ret; | |
873 | break; | |
874 | case SR_CONF_OUTPUT_FREQUENCY: | |
875 | value_f = g_variant_get_double(data); | |
876 | if (value_f <= 0.0 || value_f > MAX_PWM_FREQ) | |
877 | return SR_ERR_ARG; | |
878 | pwm->freq = value_f; | |
879 | ret = la2016_write_pwm_config(sdi, analog_idx); | |
880 | if (ret != SR_OK) | |
881 | return ret; | |
882 | break; | |
883 | case SR_CONF_DUTY_CYCLE: | |
884 | value_f = g_variant_get_double(data); | |
885 | if (value_f <= 0.0 || value_f > 100.0) | |
886 | return SR_ERR_ARG; | |
887 | pwm->duty = value_f; | |
888 | ret = la2016_write_pwm_config(sdi, analog_idx); | |
889 | if (ret != SR_OK) | |
890 | return ret; | |
891 | break; | |
892 | default: | |
893 | return SR_ERR_NA; | |
894 | } | |
895 | return SR_OK; | |
896 | } | |
897 | ||
898 | switch (key) { | |
899 | case SR_CONF_SAMPLERATE: | |
900 | devc->samplerate = g_variant_get_uint64(data); | |
901 | break; | |
902 | case SR_CONF_LIMIT_SAMPLES: | |
903 | case SR_CONF_LIMIT_MSEC: | |
904 | return sr_sw_limits_config_set(&devc->sw_limits, key, data); | |
905 | case SR_CONF_CAPTURE_RATIO: | |
906 | devc->capture_ratio = g_variant_get_uint64(data); | |
907 | break; | |
908 | #if WITH_THRESHOLD_DEVCFG | |
909 | case SR_CONF_VOLTAGE_THRESHOLD: | |
910 | idx = std_double_tuple_idx(data, | |
911 | ARRAY_AND_SIZE(threshold_ranges)); | |
912 | if (idx < 0) | |
913 | return SR_ERR_ARG; | |
914 | devc->threshold_voltage_idx = idx; | |
915 | break; | |
916 | #endif /* WITH_THRESHOLD_DEVCFG */ | |
917 | default: | |
918 | return SR_ERR_NA; | |
919 | } | |
920 | ||
921 | return SR_OK; | |
922 | } | |
923 | ||
924 | static int config_list(uint32_t key, GVariant **data, | |
925 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
926 | { | |
927 | struct dev_context *devc; | |
928 | int ret, cg_type; | |
929 | size_t logic_idx, analog_idx; | |
930 | ||
931 | devc = sdi ? sdi->priv : NULL; | |
932 | ||
933 | /* Check for types (and index) of channel groups. */ | |
934 | ret = get_cg_index(sdi, cg, &cg_type, &logic_idx, &analog_idx); | |
935 | if (cg && ret != SR_OK) | |
936 | return SR_ERR_ARG; | |
937 | ||
938 | /* Handle requests for the "Logic" channel group. */ | |
939 | if (cg && cg_type == SR_CHANNEL_LOGIC) { | |
940 | switch (key) { | |
941 | case SR_CONF_DEVICE_OPTIONS: | |
942 | if (ARRAY_SIZE(devopts_cg_logic) == 0) | |
943 | return SR_ERR_NA; | |
944 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
945 | devopts_cg_logic, ARRAY_SIZE(devopts_cg_logic), | |
946 | sizeof(devopts_cg_logic[0])); | |
947 | break; | |
948 | #if !WITH_THRESHOLD_DEVCFG | |
949 | case SR_CONF_VOLTAGE_THRESHOLD: | |
950 | *data = std_gvar_thresholds(ARRAY_AND_SIZE(threshold_ranges)); | |
951 | break; | |
952 | #endif /* WITH_THRESHOLD_DEVCFG */ | |
953 | default: | |
954 | return SR_ERR_NA; | |
955 | } | |
956 | return SR_OK; | |
957 | } | |
958 | ||
959 | /* Handle requests for the "PWMx" channel groups. */ | |
960 | if (cg && cg_type == SR_CHANNEL_ANALOG) { | |
961 | switch (key) { | |
962 | case SR_CONF_DEVICE_OPTIONS: | |
963 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
964 | devopts_cg_pwm, ARRAY_SIZE(devopts_cg_pwm), | |
965 | sizeof(devopts_cg_pwm[0])); | |
966 | break; | |
967 | default: | |
968 | return SR_ERR_NA; | |
969 | } | |
970 | return SR_OK; | |
971 | } | |
972 | ||
973 | switch (key) { | |
974 | case SR_CONF_SCAN_OPTIONS: | |
975 | case SR_CONF_DEVICE_OPTIONS: | |
976 | return STD_CONFIG_LIST(key, data, sdi, cg, | |
977 | scanopts, drvopts, devopts); | |
978 | case SR_CONF_SAMPLERATE: | |
979 | if (!sdi) | |
980 | return SR_ERR_ARG; | |
981 | if (devc->model->samplerate == SR_MHZ(500)) | |
982 | *data = std_gvar_samplerates(ARRAY_AND_SIZE(rates_500mhz)); | |
983 | else if (devc->model->samplerate == SR_MHZ(200)) | |
984 | *data = std_gvar_samplerates(ARRAY_AND_SIZE(rates_200mhz)); | |
985 | else if (devc->model->samplerate == SR_MHZ(100)) | |
986 | *data = std_gvar_samplerates(ARRAY_AND_SIZE(rates_100mhz)); | |
987 | else | |
988 | return SR_ERR_BUG; | |
989 | break; | |
990 | case SR_CONF_LIMIT_SAMPLES: | |
991 | *data = std_gvar_tuple_u64(0, LA2016_NUM_SAMPLES_MAX); | |
992 | break; | |
993 | #if WITH_THRESHOLD_DEVCFG | |
994 | case SR_CONF_VOLTAGE_THRESHOLD: | |
995 | *data = std_gvar_thresholds(ARRAY_AND_SIZE(threshold_ranges)); | |
996 | break; | |
997 | #endif /* WITH_THRESHOLD_DEVCFG */ | |
998 | case SR_CONF_TRIGGER_MATCH: | |
999 | *data = std_gvar_array_i32(ARRAY_AND_SIZE(trigger_matches)); | |
1000 | break; | |
1001 | default: | |
1002 | return SR_ERR_NA; | |
1003 | } | |
1004 | ||
1005 | return SR_OK; | |
1006 | } | |
1007 | ||
1008 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) | |
1009 | { | |
1010 | struct sr_dev_driver *di; | |
1011 | struct drv_context *drvc; | |
1012 | struct sr_context *ctx; | |
1013 | struct dev_context *devc; | |
1014 | size_t unitsize; | |
1015 | double voltage; | |
1016 | int ret; | |
1017 | ||
1018 | di = sdi->driver; | |
1019 | drvc = di->context; | |
1020 | ctx = drvc->sr_ctx;; | |
1021 | devc = sdi->priv; | |
1022 | ||
1023 | if (!devc->feed_queue) { | |
1024 | if (devc->model->channel_count == 32) | |
1025 | unitsize = sizeof(uint32_t); | |
1026 | else if (devc->model->channel_count == 16) | |
1027 | unitsize = sizeof(uint16_t); | |
1028 | else | |
1029 | return SR_ERR_ARG; | |
1030 | devc->feed_queue = feed_queue_logic_alloc(sdi, | |
1031 | LA2016_CONVBUFFER_SIZE, unitsize); | |
1032 | if (!devc->feed_queue) { | |
1033 | sr_err("Cannot allocate buffer for session feed."); | |
1034 | return SR_ERR_MALLOC; | |
1035 | } | |
1036 | devc->packets_per_chunk = TRANSFER_PACKET_LENGTH; | |
1037 | devc->packets_per_chunk--; | |
1038 | devc->packets_per_chunk /= unitsize + sizeof(uint8_t); | |
1039 | } | |
1040 | ||
1041 | sr_sw_limits_acquisition_start(&devc->sw_limits); | |
1042 | ||
1043 | voltage = threshold_voltage(sdi, NULL); | |
1044 | ret = la2016_setup_acquisition(sdi, voltage); | |
1045 | if (ret != SR_OK) { | |
1046 | feed_queue_logic_free(devc->feed_queue); | |
1047 | devc->feed_queue = NULL; | |
1048 | return ret; | |
1049 | } | |
1050 | ||
1051 | ret = la2016_start_acquisition(sdi); | |
1052 | if (ret != SR_OK) { | |
1053 | la2016_abort_acquisition(sdi); | |
1054 | feed_queue_logic_free(devc->feed_queue); | |
1055 | devc->feed_queue = NULL; | |
1056 | return ret; | |
1057 | } | |
1058 | ||
1059 | devc->completion_seen = FALSE; | |
1060 | usb_source_add(sdi->session, ctx, 50, | |
1061 | la2016_receive_data, (void *)sdi); | |
1062 | ||
1063 | std_session_send_df_header(sdi); | |
1064 | ||
1065 | return SR_OK; | |
1066 | } | |
1067 | ||
1068 | static int dev_acquisition_stop(struct sr_dev_inst *sdi) | |
1069 | { | |
1070 | int ret; | |
1071 | ||
1072 | ret = la2016_abort_acquisition(sdi); | |
1073 | ||
1074 | return ret; | |
1075 | } | |
1076 | ||
1077 | static struct sr_dev_driver kingst_la2016_driver_info = { | |
1078 | .name = "kingst-la2016", | |
1079 | .longname = "Kingst LA2016", | |
1080 | .api_version = 1, | |
1081 | .init = std_init, | |
1082 | .cleanup = std_cleanup, | |
1083 | .scan = scan, | |
1084 | .dev_list = std_dev_list, | |
1085 | .dev_clear = std_dev_clear, | |
1086 | .config_get = config_get, | |
1087 | .config_set = config_set, | |
1088 | .config_list = config_list, | |
1089 | .dev_open = dev_open, | |
1090 | .dev_close = dev_close, | |
1091 | .dev_acquisition_start = dev_acquisition_start, | |
1092 | .dev_acquisition_stop = dev_acquisition_stop, | |
1093 | .context = NULL, | |
1094 | }; | |
1095 | SR_REGISTER_DEV_DRIVER(kingst_la2016_driver_info); |