]>
Commit | Line | Data |
---|---|---|
1 | ------------------------------------------------------------------------------- | |
2 | Siemens SLE4442 Chip Card protocol capture | |
3 | ------------------------------------------------------------------------------- | |
4 | ||
5 | See the parent directory for more general information. These captures | |
6 | correspond to the SLE4442 chip. Each file demonstrates an individual | |
7 | operation. | |
8 | ||
9 | ||
10 | Logic analyzer setup | |
11 | -------------------- | |
12 | ||
13 | The logic analyzer used was a Cypress FX2 no-brand device (at 500kHz): | |
14 | ||
15 | Probe SLE4442 pin | |
16 | ----------------------- | |
17 | 0 I/O | |
18 | 1 CLK | |
19 | 2 RST | |
20 | ||
21 | ||
22 | sle4442_atr.sr | |
23 | -------------- | |
24 | ||
25 | Reset issued by the reader, ATR (Answer to Reset) response sent by the card. | |
26 | ||
27 | ||
28 | sle4442_psc_correct.sr | |
29 | ---------------------- | |
30 | ||
31 | Reader reset, correct PSC (Programmable Security Code) sent by the reader to | |
32 | the card, and gets accepted. | |
33 | ||
34 | ||
35 | sle4442_psc_wrong.sr | |
36 | -------------------- | |
37 | ||
38 | Reader reset, incorrect PSC sent by the reader to the card, and gets refused. | |
39 | ||
40 | ||
41 | sle4442_read_main_memory.sr | |
42 | --------------------------- | |
43 | ||
44 | Full read of the card's main memory (complete address range). Includes the | |
45 | ATR content at offset 0. | |
46 | ||
47 | ||
48 | sle4442_write_cafe1337_offset_30.sr | |
49 | ----------------------------------- | |
50 | ||
51 | Write 0xCA 0xFE 0x13 0x37 to main memory at offset 0x30, then read back | |
52 | several main memory regions (starting slightly before the recently written | |
53 | address range, and starting from the beginning of the card's memory). Each | |
54 | read continues to the end of the card's capacity. |