]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libserialport project. | |
3 | * | |
4 | * Copyright (C) 2013 Martin Ling <martin-libserialport@earth.li> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU Lesser General Public License as | |
8 | * published by the Free Software Foundation, either version 3 of the | |
9 | * License, or (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU Lesser General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | /** | |
21 | * @mainpage libserialport API | |
22 | * | |
23 | * Introduction | |
24 | * ============ | |
25 | * | |
26 | * libserialport is a minimal library written in C that is intended to take | |
27 | * care of the OS-specific details when writing software that uses serial ports. | |
28 | * | |
29 | * By writing your serial code to use libserialport, you enable it to work | |
30 | * transparently on any platform supported by the library. | |
31 | * | |
32 | * The operations that are supported are: | |
33 | * | |
34 | * - @ref Enumeration (obtaining a list of serial ports on the system) | |
35 | * - @ref Ports | |
36 | * - @ref Configuration (baud rate, parity, etc.) | |
37 | * - @ref Signals (modem control lines, breaks, etc.) | |
38 | * - @ref Data | |
39 | * - @ref Errors | |
40 | * | |
41 | * libserialport is an open source project released under the LGPL3+ license. | |
42 | * | |
43 | * API principles | |
44 | * ============== | |
45 | * | |
46 | * The API is simple, and designed to be a minimal wrapper around the serial | |
47 | * port support in each OS. | |
48 | * | |
49 | * Most functions take a pointer to a struct sp_port, which represents a serial | |
50 | * port. These structures are always allocated and freed by the library, using | |
51 | * the functions in the @ref Enumeration "Enumeration" section. | |
52 | * | |
53 | * Most functions have return type @ref sp_return and can return only four | |
54 | * possible error values: | |
55 | * | |
56 | * - @ref SP_ERR_ARG means that a function was called with invalid | |
57 | * arguments. This implies a bug in the caller. The arguments passed would | |
58 | * be invalid regardless of the underlying OS or serial device involved. | |
59 | * | |
60 | * - @ref SP_ERR_FAIL means that the OS reported a failure. The error code or | |
61 | * message provided by the OS can be obtained by calling sp_last_error_code() | |
62 | * or sp_last_error_message(). | |
63 | * | |
64 | * - @ref SP_ERR_SUPP indicates that there is no support for the requested | |
65 | * operation in the current OS, driver or device. No error message is | |
66 | * available from the OS in this case. There is either no way to request | |
67 | * the operation in the first place, or libserialport does not know how to | |
68 | * do so in the current version. | |
69 | * | |
70 | * - @ref SP_ERR_MEM indicates that a memory allocation failed. | |
71 | * | |
72 | * All of these error values are negative. | |
73 | * | |
74 | * Calls that succeed return @ref SP_OK, which is equal to zero. Some functions | |
75 | * declared @ref sp_return can also return a positive value for a successful | |
76 | * numeric result, e.g. sp_read() and sp_write(). | |
77 | */ | |
78 | ||
79 | #ifndef LIBSERIALPORT_LIBSERIALPORT_H | |
80 | #define LIBSERIALPORT_LIBSERIALPORT_H | |
81 | ||
82 | #ifdef __cplusplus | |
83 | extern "C" { | |
84 | #endif | |
85 | ||
86 | #include <stddef.h> | |
87 | #ifdef _WIN32 | |
88 | #include <windows.h> | |
89 | #endif | |
90 | ||
91 | /* Package version macros (e.g. for conditional compilation). */ | |
92 | #define SP_PACKAGE_VERSION_MAJOR @SP_PACKAGE_VERSION_MAJOR@ | |
93 | #define SP_PACKAGE_VERSION_MINOR @SP_PACKAGE_VERSION_MINOR@ | |
94 | #define SP_PACKAGE_VERSION_MICRO @SP_PACKAGE_VERSION_MICRO@ | |
95 | #define SP_PACKAGE_VERSION_STRING "@SP_PACKAGE_VERSION@" | |
96 | ||
97 | /* Library/libtool version macros (e.g. for conditional compilation). */ | |
98 | #define SP_LIB_VERSION_CURRENT @SP_LIB_VERSION_CURRENT@ | |
99 | #define SP_LIB_VERSION_REVISION @SP_LIB_VERSION_REVISION@ | |
100 | #define SP_LIB_VERSION_AGE @SP_LIB_VERSION_AGE@ | |
101 | #define SP_LIB_VERSION_STRING "@SP_LIB_VERSION@" | |
102 | ||
103 | /** Return values. */ | |
104 | enum sp_return { | |
105 | /** Operation completed successfully. */ | |
106 | SP_OK = 0, | |
107 | /** Invalid arguments were passed to the function. */ | |
108 | SP_ERR_ARG = -1, | |
109 | /** A system error occured while executing the operation. */ | |
110 | SP_ERR_FAIL = -2, | |
111 | /** A memory allocation failed while executing the operation. */ | |
112 | SP_ERR_MEM = -3, | |
113 | /** The requested operation is not supported by this system or device. */ | |
114 | SP_ERR_SUPP = -4, | |
115 | }; | |
116 | ||
117 | /** Port access modes. */ | |
118 | enum sp_mode { | |
119 | /** Open port for read access. */ | |
120 | SP_MODE_READ = 1, | |
121 | /** Open port for write access. */ | |
122 | SP_MODE_WRITE = 2, | |
123 | /** Open port in non-blocking mode. */ | |
124 | SP_MODE_NONBLOCK = 4, | |
125 | }; | |
126 | ||
127 | /** Buffer selection. */ | |
128 | enum sp_buffer { | |
129 | /** Input buffer. */ | |
130 | SP_BUF_INPUT = 1, | |
131 | /** Output buffer. */ | |
132 | SP_BUF_OUTPUT = 2, | |
133 | /** Both buffers. */ | |
134 | SP_BUF_BOTH = 3, | |
135 | }; | |
136 | ||
137 | /** Parity settings. */ | |
138 | enum sp_parity { | |
139 | /** Special value to indicate setting should be left alone. */ | |
140 | SP_PARITY_INVALID = -1, | |
141 | /** No parity. */ | |
142 | SP_PARITY_NONE = 0, | |
143 | /** Odd parity. */ | |
144 | SP_PARITY_ODD = 1, | |
145 | /** Even parity. */ | |
146 | SP_PARITY_EVEN = 2, | |
147 | }; | |
148 | ||
149 | /** RTS pin behaviour. */ | |
150 | enum sp_rts { | |
151 | /** Special value to indicate setting should be left alone. */ | |
152 | SP_RTS_INVALID = -1, | |
153 | /** RTS off. */ | |
154 | SP_RTS_OFF = 0, | |
155 | /** RTS on. */ | |
156 | SP_RTS_ON = 1, | |
157 | /** RTS used for flow control. */ | |
158 | SP_RTS_FLOW_CONTROL = 2, | |
159 | }; | |
160 | ||
161 | /** CTS pin behaviour. */ | |
162 | enum sp_cts { | |
163 | /** Special value to indicate setting should be left alone. */ | |
164 | SP_CTS_INVALID = -1, | |
165 | /** CTS ignored. */ | |
166 | SP_CTS_IGNORE = 0, | |
167 | /** CTS used for flow control. */ | |
168 | SP_CTS_FLOW_CONTROL = 1, | |
169 | }; | |
170 | ||
171 | /** DTR pin behaviour. */ | |
172 | enum sp_dtr { | |
173 | /** Special value to indicate setting should be left alone. */ | |
174 | SP_DTR_INVALID = -1, | |
175 | /** DTR off. */ | |
176 | SP_DTR_OFF = 0, | |
177 | /** DTR on. */ | |
178 | SP_DTR_ON = 1, | |
179 | /** DTR used for flow control. */ | |
180 | SP_DTR_FLOW_CONTROL = 2, | |
181 | }; | |
182 | ||
183 | /** DSR pin behaviour. */ | |
184 | enum sp_dsr { | |
185 | /** Special value to indicate setting should be left alone. */ | |
186 | SP_DSR_INVALID = -1, | |
187 | /** DSR ignored. */ | |
188 | SP_DSR_IGNORE = 0, | |
189 | /** DSR used for flow control. */ | |
190 | SP_DSR_FLOW_CONTROL = 1, | |
191 | }; | |
192 | ||
193 | /** XON/XOFF flow control behaviour. */ | |
194 | enum sp_xonxoff { | |
195 | /** Special value to indicate setting should be left alone. */ | |
196 | SP_XONXOFF_INVALID = -1, | |
197 | /** XON/XOFF disabled. */ | |
198 | SP_XONXOFF_DISABLED = 0, | |
199 | /** XON/XOFF enabled for input only. */ | |
200 | SP_XONXOFF_IN = 1, | |
201 | /** XON/XOFF enabled for output only. */ | |
202 | SP_XONXOFF_OUT = 2, | |
203 | /** XON/XOFF enabled for input and output. */ | |
204 | SP_XONXOFF_INOUT = 3, | |
205 | }; | |
206 | ||
207 | /** Standard flow control combinations. */ | |
208 | enum sp_flowcontrol { | |
209 | /** No flow control. */ | |
210 | SP_FLOWCONTROL_NONE = 0, | |
211 | /** Software flow control using XON/XOFF characters. */ | |
212 | SP_FLOWCONTROL_XONXOFF = 1, | |
213 | /** Hardware flow control using RTS/CTS signals. */ | |
214 | SP_FLOWCONTROL_RTSCTS = 2, | |
215 | /** Hardware flow control using DTR/DSR signals. */ | |
216 | SP_FLOWCONTROL_DTRDSR = 3, | |
217 | }; | |
218 | ||
219 | /** Input signals. */ | |
220 | enum sp_signal { | |
221 | /** Clear to send. */ | |
222 | SP_SIG_CTS = 1, | |
223 | /** Data set ready. */ | |
224 | SP_SIG_DSR = 2, | |
225 | /** Data carrier detect. */ | |
226 | SP_SIG_DCD = 4, | |
227 | /** Ring indicator. */ | |
228 | SP_SIG_RI = 8, | |
229 | }; | |
230 | ||
231 | /** A serial port. */ | |
232 | struct sp_port; | |
233 | ||
234 | /** Configuration for a serial port. */ | |
235 | struct sp_port_config; | |
236 | ||
237 | /** | |
238 | @defgroup Enumeration Port enumeration | |
239 | @{ | |
240 | */ | |
241 | ||
242 | /** | |
243 | * Obtain a pointer to a new sp_port structure representing the named port. | |
244 | * | |
245 | * The user should allocate a variable of type "struct sp_port *" and pass a | |
246 | * pointer to this to receive the result. | |
247 | * | |
248 | * The result should be freed after use by calling sp_free_port(). | |
249 | * | |
250 | * If any error is returned, the variable pointed to by port_ptr will be set | |
251 | * to NULL. Otherwise, it will be set to point to the newly allocated port. | |
252 | * | |
253 | * @return SP_OK upon success, a negative error code otherwise. | |
254 | */ | |
255 | enum sp_return sp_get_port_by_name(const char *portname, struct sp_port **port_ptr); | |
256 | ||
257 | /** | |
258 | * Free a port structure obtained from sp_get_port_by_name() or sp_copy_port(). | |
259 | */ | |
260 | void sp_free_port(struct sp_port *port); | |
261 | ||
262 | /** | |
263 | * List the serial ports available on the system. | |
264 | * | |
265 | * The result obtained is an array of pointers to sp_port structures, | |
266 | * terminated by a NULL. The user should allocate a variable of type | |
267 | * "struct sp_port **" and pass a pointer to this to receive the result. | |
268 | * | |
269 | * The result should be freed after use by calling sp_free_port_list(). | |
270 | * If a port from the list is to be used after freeing the list, it must be | |
271 | * copied first using sp_copy_port(). | |
272 | * | |
273 | * If any error is returned, the variable pointed to by list_ptr will be set | |
274 | * to NULL. Otherwise, it will be set to point to the newly allocated array. | |
275 | * | |
276 | * @return SP_OK upon success, a negative error code otherwise. | |
277 | */ | |
278 | enum sp_return sp_list_ports(struct sp_port ***list_ptr); | |
279 | ||
280 | /** | |
281 | * Make a new copy of a sp_port structure. | |
282 | * | |
283 | * The user should allocate a variable of type "struct sp_port *" and pass a | |
284 | * pointer to this to receive the result. | |
285 | * | |
286 | * The copy should be freed after use by calling sp_free_port(). | |
287 | * | |
288 | * If any error is returned, the variable pointed to by copy_ptr will be set | |
289 | * to NULL. Otherwise, it will be set to point to the newly allocated copy. | |
290 | * | |
291 | * @return SP_OK upon success, a negative error code otherwise. | |
292 | */ | |
293 | enum sp_return sp_copy_port(const struct sp_port *port, struct sp_port **copy_ptr); | |
294 | ||
295 | /** | |
296 | * Free a port list obtained from sp_list_ports(). | |
297 | * | |
298 | * This will also free all the sp_port structures referred to from the list; | |
299 | * any that are to be retained must be copied first using sp_copy_port(). | |
300 | */ | |
301 | void sp_free_port_list(struct sp_port **ports); | |
302 | ||
303 | /** | |
304 | * @} | |
305 | * @defgroup Ports Opening, closing and querying ports | |
306 | * @{ | |
307 | */ | |
308 | ||
309 | /** | |
310 | * Open the specified serial port. | |
311 | * | |
312 | * @param port Pointer to port structure. | |
313 | * @param flags Flags to use when opening the serial port. | |
314 | * | |
315 | * @return SP_OK upon success, a negative error code otherwise. | |
316 | */ | |
317 | enum sp_return sp_open(struct sp_port *port, enum sp_mode flags); | |
318 | ||
319 | /** | |
320 | * Close the specified serial port. | |
321 | * | |
322 | * @return SP_OK upon success, a negative error code otherwise. | |
323 | */ | |
324 | enum sp_return sp_close(struct sp_port *port); | |
325 | ||
326 | /** | |
327 | * Get the name of a port. | |
328 | * | |
329 | * The name returned is whatever is normally used to refer to a port on the | |
330 | * current operating system; e.g. for Windows it will usually be a "COMn" | |
331 | * device name, and for Unix it will be a device path beginning with "/dev/". | |
332 | * | |
333 | * @param port Pointer to port structure. | |
334 | * | |
335 | * @return The port name, or NULL if an invalid port is passed. The name | |
336 | * string is part of the port structure and may not be used after the | |
337 | * port structure has been freed. | |
338 | */ | |
339 | char *sp_get_port_name(const struct sp_port *port); | |
340 | ||
341 | /** | |
342 | * Get the operating system handle for a port. | |
343 | * | |
344 | * The type of the handle depends on the operating system. On Unix based | |
345 | * systems, the handle is a file descriptor of type "int". On Windows, the | |
346 | * handle is of type "HANDLE". The user should allocate a variable of the | |
347 | * appropriate type and pass a pointer to this to receive the result. | |
348 | * | |
349 | * To obtain a valid handle, the port must first be opened by calling | |
350 | * sp_open() using the same port structure. | |
351 | * | |
352 | * After the port is closed or the port structure freed, the handle may | |
353 | * no longer be valid. | |
354 | * | |
355 | * @warning This feature is provided so that programs may make use of | |
356 | * OS-specific functionality where desired. Doing so obviously | |
357 | * comes at a cost in portability. It also cannot be guaranteed | |
358 | * that direct usage of the OS handle will not conflict with the | |
359 | * library's own usage of the port. Be careful. | |
360 | * | |
361 | * @return SP_OK upon success, a negative error code otherwise. | |
362 | */ | |
363 | enum sp_return sp_get_port_handle(const struct sp_port *port, void *result_ptr); | |
364 | ||
365 | /** | |
366 | * @} | |
367 | * @defgroup Configuration Setting port parameters | |
368 | * @{ | |
369 | */ | |
370 | ||
371 | /** | |
372 | * Allocate a port configuration structure. | |
373 | * | |
374 | * The user should allocate a variable of type "struct sp_config *" and pass a | |
375 | * pointer to this to receive the result. The variable will be updated to | |
376 | * point to the new configuration structure. The structure is opaque and must | |
377 | * be accessed via the functions provided. | |
378 | * | |
379 | * All parameters in the structure will be initialised to special values which | |
380 | * are ignored by sp_set_config(). | |
381 | * | |
382 | * The structure should be freed after use by calling sp_free_config(). | |
383 | * | |
384 | * @param config_ptr Pointer to variable to receive result. | |
385 | * | |
386 | * @return SP_OK upon success, a negative error code otherwise. | |
387 | */ | |
388 | enum sp_return sp_new_config(struct sp_port_config **config_ptr); | |
389 | ||
390 | /** | |
391 | * Free a port configuration structure. | |
392 | * | |
393 | * @param config Pointer to configuration structure. | |
394 | */ | |
395 | void sp_free_config(struct sp_port_config *config); | |
396 | ||
397 | /** | |
398 | * Get the current configuration of the specified serial port. | |
399 | * | |
400 | * The user should allocate a configuration structure using sp_new_config() | |
401 | * and pass this as the config parameter. The configuration structure will | |
402 | * be updated with the port configuration. | |
403 | * | |
404 | * Any parameters that are configured with settings not recognised or | |
405 | * supported by libserialport, will be set to special values that are | |
406 | * ignored by sp_set_config(). | |
407 | * | |
408 | * @return SP_OK upon success, a negative error code otherwise. | |
409 | */ | |
410 | enum sp_return sp_get_config(struct sp_port *port, struct sp_port_config *config); | |
411 | ||
412 | /** | |
413 | * Set the configuration for the specified serial port. | |
414 | * | |
415 | * For each parameter in the configuration, there is a special value (usually | |
416 | * -1, but see the documentation for each field). These values will be ignored | |
417 | * and the corresponding setting left unchanged on the port. | |
418 | * | |
419 | * @return SP_OK upon success, a negative error code otherwise. | |
420 | */ | |
421 | enum sp_return sp_set_config(struct sp_port *port, const struct sp_port_config *config); | |
422 | ||
423 | /** | |
424 | * Set the baud rate for the specified serial port. | |
425 | * | |
426 | * @param port Pointer to port structure. | |
427 | * @param baudrate Baud rate in bits per second. | |
428 | * | |
429 | * @return SP_OK upon success, a negative error code otherwise. | |
430 | */ | |
431 | enum sp_return sp_set_baudrate(struct sp_port *port, int baudrate); | |
432 | ||
433 | /** | |
434 | * Get the baud rate from a port configuration. | |
435 | * | |
436 | * The user should allocate a variable of type int and pass a pointer to this | |
437 | * to receive the result. | |
438 | * | |
439 | * @param config Pointer to configuration structure. | |
440 | * @param baudrate_ptr Pointer to variable to store result. | |
441 | * | |
442 | * @return SP_OK upon success, a negative error code otherwise. | |
443 | */ | |
444 | enum sp_return sp_get_config_baudrate(const struct sp_port_config *config, int *baudrate_ptr); | |
445 | ||
446 | /** | |
447 | * Set the baud rate in a port configuration. | |
448 | * | |
449 | * @param config Pointer to configuration structure. | |
450 | * @param baudrate Baud rate in bits per second, or -1 to retain current setting. | |
451 | * | |
452 | * @return SP_OK upon success, a negative error code otherwise. | |
453 | */ | |
454 | enum sp_return sp_set_config_baudrate(struct sp_port_config *config, int baudrate); | |
455 | ||
456 | /** | |
457 | * Set the data bits for the specified serial port. | |
458 | * | |
459 | * @param port Pointer to port structure. | |
460 | * @param bits Number of data bits. | |
461 | * | |
462 | * @return SP_OK upon success, a negative error code otherwise. | |
463 | */ | |
464 | enum sp_return sp_set_bits(struct sp_port *port, int bits); | |
465 | ||
466 | /** | |
467 | * Get the data bits from a port configuration. | |
468 | * | |
469 | * The user should allocate a variable of type int and pass a pointer to this | |
470 | * to receive the result. | |
471 | * | |
472 | * @param config Pointer to configuration structure. | |
473 | * @param bits_ptr Pointer to variable to store result. | |
474 | * | |
475 | * @return SP_OK upon success, a negative error code otherwise. | |
476 | */ | |
477 | enum sp_return sp_get_config_bits(const struct sp_port_config *config, int *bits_ptr); | |
478 | ||
479 | /** | |
480 | * Set the data bits in a port configuration. | |
481 | * | |
482 | * @param config Pointer to configuration structure. | |
483 | * @param bits Number of data bits, or -1 to retain current setting. | |
484 | * | |
485 | * @return SP_OK upon success, a negative error code otherwise. | |
486 | */ | |
487 | enum sp_return sp_set_config_bits(struct sp_port_config *config, int bits); | |
488 | ||
489 | /** | |
490 | * Set the parity setting for the specified serial port. | |
491 | * | |
492 | * @param port Pointer to port structure. | |
493 | * @param parity Parity setting. | |
494 | * | |
495 | * @return SP_OK upon success, a negative error code otherwise. | |
496 | */ | |
497 | enum sp_return sp_set_parity(struct sp_port *port, enum sp_parity parity); | |
498 | ||
499 | /** | |
500 | * Get the parity setting from a port configuration. | |
501 | * | |
502 | * The user should allocate a variable of type enum sp_parity and pass a pointer to this | |
503 | * to receive the result. | |
504 | * | |
505 | * @param config Pointer to configuration structure. | |
506 | * @param parity_ptr Pointer to variable to store result. | |
507 | * | |
508 | * @return SP_OK upon success, a negative error code otherwise. | |
509 | */ | |
510 | enum sp_return sp_get_config_parity(const struct sp_port_config *config, enum sp_parity *parity_ptr); | |
511 | ||
512 | /** | |
513 | * Set the parity setting in a port configuration. | |
514 | * | |
515 | * @param config Pointer to configuration structure. | |
516 | * @param parity Parity setting, or -1 to retain current setting. | |
517 | * | |
518 | * @return SP_OK upon success, a negative error code otherwise. | |
519 | */ | |
520 | enum sp_return sp_set_config_parity(struct sp_port_config *config, enum sp_parity parity); | |
521 | ||
522 | /** | |
523 | * Set the stop bits for the specified serial port. | |
524 | * | |
525 | * @param port Pointer to port structure. | |
526 | * @param stopbits Number of stop bits. | |
527 | * | |
528 | * @return SP_OK upon success, a negative error code otherwise. | |
529 | */ | |
530 | enum sp_return sp_set_stopbits(struct sp_port *port, int stopbits); | |
531 | ||
532 | /** | |
533 | * Get the stop bits from a port configuration. | |
534 | * | |
535 | * The user should allocate a variable of type int and pass a pointer to this | |
536 | * to receive the result. | |
537 | * | |
538 | * @param config Pointer to configuration structure. | |
539 | * @param stopbits_ptr Pointer to variable to store result. | |
540 | * | |
541 | * @return SP_OK upon success, a negative error code otherwise. | |
542 | */ | |
543 | enum sp_return sp_get_config_stopbits(const struct sp_port_config *config, int *stopbits_ptr); | |
544 | ||
545 | /** | |
546 | * Set the stop bits in a port configuration. | |
547 | * | |
548 | * @param config Pointer to configuration structure. | |
549 | * @param stopbits Number of stop bits, or -1 to retain current setting. | |
550 | * | |
551 | * @return SP_OK upon success, a negative error code otherwise. | |
552 | */ | |
553 | enum sp_return sp_set_config_stopbits(struct sp_port_config *config, int stopbits); | |
554 | ||
555 | /** | |
556 | * Set the RTS pin behaviour for the specified serial port. | |
557 | * | |
558 | * @param port Pointer to port structure. | |
559 | * @param rts RTS pin mode. | |
560 | * | |
561 | * @return SP_OK upon success, a negative error code otherwise. | |
562 | */ | |
563 | enum sp_return sp_set_rts(struct sp_port *port, enum sp_rts rts); | |
564 | ||
565 | /** | |
566 | * Get the RTS pin behaviour from a port configuration. | |
567 | * | |
568 | * The user should allocate a variable of type enum sp_rts and pass a pointer to this | |
569 | * to receive the result. | |
570 | * | |
571 | * @param config Pointer to configuration structure. | |
572 | * @param rts_ptr Pointer to variable to store result. | |
573 | * | |
574 | * @return SP_OK upon success, a negative error code otherwise. | |
575 | */ | |
576 | enum sp_return sp_get_config_rts(const struct sp_port_config *config, enum sp_rts *rts_ptr); | |
577 | ||
578 | /** | |
579 | * Set the RTS pin behaviour in a port configuration. | |
580 | * | |
581 | * @param config Pointer to configuration structure. | |
582 | * @param rts RTS pin mode, or -1 to retain current setting. | |
583 | * | |
584 | * @return SP_OK upon success, a negative error code otherwise. | |
585 | */ | |
586 | enum sp_return sp_set_config_rts(struct sp_port_config *config, enum sp_rts rts); | |
587 | ||
588 | /** | |
589 | * Set the CTS pin behaviour for the specified serial port. | |
590 | * | |
591 | * @param port Pointer to port structure. | |
592 | * @param cts CTS pin mode. | |
593 | * | |
594 | * @return SP_OK upon success, a negative error code otherwise. | |
595 | */ | |
596 | enum sp_return sp_set_cts(struct sp_port *port, enum sp_cts cts); | |
597 | ||
598 | /** | |
599 | * Get the CTS pin behaviour from a port configuration. | |
600 | * | |
601 | * The user should allocate a variable of type enum sp_cts and pass a pointer to this | |
602 | * to receive the result. | |
603 | * | |
604 | * @param config Pointer to configuration structure. | |
605 | * @param cts_ptr Pointer to variable to store result. | |
606 | * | |
607 | * @return SP_OK upon success, a negative error code otherwise. | |
608 | */ | |
609 | enum sp_return sp_get_config_cts(const struct sp_port_config *config, enum sp_cts *cts_ptr); | |
610 | ||
611 | /** | |
612 | * Set the CTS pin behaviour in a port configuration. | |
613 | * | |
614 | * @param config Pointer to configuration structure. | |
615 | * @param cts CTS pin mode, or -1 to retain current setting. | |
616 | * | |
617 | * @return SP_OK upon success, a negative error code otherwise. | |
618 | */ | |
619 | enum sp_return sp_set_config_cts(struct sp_port_config *config, enum sp_cts cts); | |
620 | ||
621 | /** | |
622 | * Set the DTR pin behaviour for the specified serial port. | |
623 | * | |
624 | * @param port Pointer to port structure. | |
625 | * @param dtr DTR pin mode. | |
626 | * | |
627 | * @return SP_OK upon success, a negative error code otherwise. | |
628 | */ | |
629 | enum sp_return sp_set_dtr(struct sp_port *port, enum sp_dtr dtr); | |
630 | ||
631 | /** | |
632 | * Get the DTR pin behaviour from a port configuration. | |
633 | * | |
634 | * The user should allocate a variable of type enum sp_dtr and pass a pointer to this | |
635 | * to receive the result. | |
636 | * | |
637 | * @param config Pointer to configuration structure. | |
638 | * @param dtr_ptr Pointer to variable to store result. | |
639 | * | |
640 | * @return SP_OK upon success, a negative error code otherwise. | |
641 | */ | |
642 | enum sp_return sp_get_config_dtr(const struct sp_port_config *config, enum sp_dtr *dtr_ptr); | |
643 | ||
644 | /** | |
645 | * Set the DTR pin behaviour in a port configuration. | |
646 | * | |
647 | * @param config Pointer to configuration structure. | |
648 | * @param dtr DTR pin mode, or -1 to retain current setting. | |
649 | * | |
650 | * @return SP_OK upon success, a negative error code otherwise. | |
651 | */ | |
652 | enum sp_return sp_set_config_dtr(struct sp_port_config *config, enum sp_dtr dtr); | |
653 | ||
654 | /** | |
655 | * Set the DSR pin behaviour for the specified serial port. | |
656 | * | |
657 | * @param port Pointer to port structure. | |
658 | * @param dsr DSR pin mode. | |
659 | * | |
660 | * @return SP_OK upon success, a negative error code otherwise. | |
661 | */ | |
662 | enum sp_return sp_set_dsr(struct sp_port *port, enum sp_dsr dsr); | |
663 | ||
664 | /** | |
665 | * Get the DSR pin behaviour from a port configuration. | |
666 | * | |
667 | * The user should allocate a variable of type enum sp_dsr and pass a pointer to this | |
668 | * to receive the result. | |
669 | * | |
670 | * @param config Pointer to configuration structure. | |
671 | * @param dsr_ptr Pointer to variable to store result. | |
672 | * | |
673 | * @return SP_OK upon success, a negative error code otherwise. | |
674 | */ | |
675 | enum sp_return sp_get_config_dsr(const struct sp_port_config *config, enum sp_dsr *dsr_ptr); | |
676 | ||
677 | /** | |
678 | * Set the DSR pin behaviour in a port configuration. | |
679 | * | |
680 | * @param config Pointer to configuration structure. | |
681 | * @param dsr DSR pin mode, or -1 to retain current setting. | |
682 | * | |
683 | * @return SP_OK upon success, a negative error code otherwise. | |
684 | */ | |
685 | enum sp_return sp_set_config_dsr(struct sp_port_config *config, enum sp_dsr dsr); | |
686 | ||
687 | /** | |
688 | * Set the XON/XOFF configuration for the specified serial port. | |
689 | * | |
690 | * @param port Pointer to port structure. | |
691 | * @param xon_xoff XON/XOFF mode. | |
692 | * | |
693 | * @return SP_OK upon success, a negative error code otherwise. | |
694 | */ | |
695 | enum sp_return sp_set_xon_xoff(struct sp_port *port, enum sp_xonxoff xon_xoff); | |
696 | ||
697 | /** | |
698 | * Get the XON/XOFF configuration from a port configuration. | |
699 | * | |
700 | * The user should allocate a variable of type enum sp_xonxoff and pass a pointer to this | |
701 | * to receive the result. | |
702 | * | |
703 | * @param config Pointer to configuration structure. | |
704 | * @param xon_xoff_ptr Pointer to variable to store result. | |
705 | * | |
706 | * @return SP_OK upon success, a negative error code otherwise. | |
707 | */ | |
708 | enum sp_return sp_get_config_xon_xoff(const struct sp_port_config *config, enum sp_xonxoff *xon_xoff_ptr); | |
709 | ||
710 | /** | |
711 | * Set the XON/XOFF configuration in a port configuration. | |
712 | * | |
713 | * @param config Pointer to configuration structure. | |
714 | * @param xon_xoff XON/XOFF mode, or -1 to retain current setting. | |
715 | * | |
716 | * @return SP_OK upon success, a negative error code otherwise. | |
717 | */ | |
718 | enum sp_return sp_set_config_xon_xoff(struct sp_port_config *config, enum sp_xonxoff xon_xoff); | |
719 | ||
720 | /** | |
721 | * Set the flow control type in a port configuration. | |
722 | * | |
723 | * This function is a wrapper that sets the RTS, CTS, DTR, DSR and | |
724 | * XON/XOFF settings as necessary for the specified flow control | |
725 | * type. For more fine-grained control of these settings, use their | |
726 | * individual configuration functions. | |
727 | * | |
728 | * @param config Pointer to configuration structure. | |
729 | * @param flowcontrol Flow control setting to use. | |
730 | * | |
731 | * @return SP_OK upon success, a negative error code otherwise. | |
732 | */ | |
733 | enum sp_return sp_set_config_flowcontrol(struct sp_port_config *config, enum sp_flowcontrol flowcontrol); | |
734 | ||
735 | /** | |
736 | * Set the flow control type for the specified serial port. | |
737 | * | |
738 | * This function is a wrapper that sets the RTS, CTS, DTR, DSR and | |
739 | * XON/XOFF settings as necessary for the specified flow control | |
740 | * type. For more fine-grained control of these settings, use their | |
741 | * individual configuration functions. | |
742 | * | |
743 | * @param port Pointer to port structure. | |
744 | * @param flowcontrol Flow control setting to use. | |
745 | * | |
746 | * @return SP_OK upon success, a negative error code otherwise. | |
747 | */ | |
748 | enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flowcontrol); | |
749 | ||
750 | /** | |
751 | * @} | |
752 | * @defgroup Data Reading, writing, and flushing data | |
753 | * @{ | |
754 | */ | |
755 | ||
756 | /** | |
757 | * Read bytes from the specified serial port. | |
758 | * | |
759 | * Note that this function may return after reading less than the specified | |
760 | * number of bytes; it is the user's responsibility to iterate as necessary | |
761 | * in this case. | |
762 | * | |
763 | * @param port Pointer to port structure. | |
764 | * @param buf Buffer in which to store the bytes read. | |
765 | * @param count Maximum number of bytes to read. | |
766 | * | |
767 | * @return The number of bytes read on success, or a negative error code. | |
768 | */ | |
769 | enum sp_return sp_read(struct sp_port *port, void *buf, size_t count); | |
770 | ||
771 | /** | |
772 | * Write bytes to the specified serial port. | |
773 | * | |
774 | * Note that this function may return after writing less than the specified | |
775 | * number of bytes; it is the user's responsibility to iterate as necessary | |
776 | * in this case. | |
777 | * | |
778 | * @param port Pointer to port structure. | |
779 | * @param buf Buffer containing the bytes to write. | |
780 | * @param count Maximum number of bytes to write. | |
781 | * | |
782 | * @return The number of bytes written on success, or a negative error code. | |
783 | */ | |
784 | enum sp_return sp_write(struct sp_port *port, const void *buf, size_t count); | |
785 | ||
786 | /** | |
787 | * Flush serial port buffers. Data in the selected buffer(s) is discarded. | |
788 | * | |
789 | * @param port Pointer to port structure. | |
790 | * @param buffers Which buffer(s) to flush. | |
791 | * | |
792 | * @return SP_OK upon success, a negative error code otherwise. | |
793 | */ | |
794 | enum sp_return sp_flush(struct sp_port *port, enum sp_buffer buffers); | |
795 | ||
796 | /** | |
797 | * Wait for buffered data to be transmitted. | |
798 | * | |
799 | * @param port Pointer to port structure. | |
800 | * | |
801 | * @return SP_OK upon success, a negative error code otherwise. | |
802 | */ | |
803 | enum sp_return sp_drain(struct sp_port *port); | |
804 | ||
805 | /** | |
806 | * @} | |
807 | * @defgroup Signals Port signalling operations | |
808 | * @{ | |
809 | */ | |
810 | ||
811 | /** | |
812 | * Gets the status of the control signals for the specified port. | |
813 | * | |
814 | * The user should allocate a variable of type "enum sp_signal" and pass a | |
815 | * pointer to this variable to receive the result. The result is a bitmask | |
816 | * in which individual signals can be checked by bitwise OR with values of | |
817 | * the sp_signal enum. | |
818 | * | |
819 | * @param port Pointer to port structure. | |
820 | * @param signals Pointer to variable to receive result. | |
821 | * | |
822 | * @return SP_OK upon success, a negative error code otherwise. | |
823 | */ | |
824 | enum sp_return sp_get_signals(struct sp_port *port, enum sp_signal *signals); | |
825 | ||
826 | /** | |
827 | * Put the port transmit line into the break state. | |
828 | * | |
829 | * @param port Pointer to port structure. | |
830 | * | |
831 | * @return SP_OK upon success, a negative error code otherwise. | |
832 | */ | |
833 | enum sp_return sp_start_break(struct sp_port *port); | |
834 | ||
835 | /** | |
836 | * Take the port transmit line out of the break state. | |
837 | * | |
838 | * @param port Pointer to port structure. | |
839 | * | |
840 | * @return SP_OK upon success, a negative error code otherwise. | |
841 | */ | |
842 | enum sp_return sp_end_break(struct sp_port *port); | |
843 | ||
844 | /** | |
845 | * @} | |
846 | * @defgroup Errors Obtaining error information | |
847 | * @{ | |
848 | */ | |
849 | ||
850 | /** | |
851 | * Get the error code for a failed operation. | |
852 | * | |
853 | * In order to obtain the correct result, this function should be called | |
854 | * straight after the failure, before executing any other system operations. | |
855 | * | |
856 | * @return The system's numeric code for the error that caused the last | |
857 | * operation to fail. | |
858 | */ | |
859 | int sp_last_error_code(void); | |
860 | ||
861 | /** | |
862 | * Get the error message for a failed operation. | |
863 | * | |
864 | * In order to obtain the correct result, this function should be called | |
865 | * straight after the failure, before executing other system operations. | |
866 | * | |
867 | * @return The system's message for the error that caused the last | |
868 | * operation to fail. This string may be allocated by the function, | |
869 | * and should be freed after use by calling sp_free_error_message(). | |
870 | */ | |
871 | char *sp_last_error_message(void); | |
872 | ||
873 | /** | |
874 | * Free an error message returned by sp_last_error_message(). | |
875 | */ | |
876 | void sp_free_error_message(char *message); | |
877 | ||
878 | /** | |
879 | * Set the handler function for library debugging messages. | |
880 | * | |
881 | * Debugging messages are generated by the library during each operation, | |
882 | * to help in diagnosing problems. The handler will be called for each | |
883 | * message. The handler can be set to NULL to ignore all debug messages. | |
884 | * | |
885 | * The handler function should accept a format string and variable length | |
886 | * argument list, in the same manner as e.g. printf(). | |
887 | * | |
888 | * The default handler is sp_default_debug_handler(). | |
889 | */ | |
890 | void sp_set_debug_handler(void (*handler)(const char *format, ...)); | |
891 | ||
892 | /** | |
893 | * Default handler function for library debugging messages. | |
894 | * | |
895 | * This function prints debug messages to the standard error stream if the | |
896 | * environment variable LIBSERIALPORT_DEBUG is set. Otherwise, they are | |
897 | * ignored. | |
898 | */ | |
899 | void sp_default_debug_handler(const char *format, ...); | |
900 | ||
901 | /** @} */ | |
902 | ||
903 | #ifdef __cplusplus | |
904 | } | |
905 | #endif | |
906 | ||
907 | #endif |