]>
Commit | Line | Data |
---|---|---|
1 | ------------------------------------------------------------------------------- | |
2 | Philips RC-6 remote control captures | |
3 | ------------------------------------------------------------------------------- | |
4 | ||
5 | These captures contain the IR data sent by various remote controls. | |
6 | ||
7 | ||
8 | Logic analyzer setup | |
9 | -------------------- | |
10 | ||
11 | The logic analyzer used was a Saleae Logic (at 1MHz): | |
12 | ||
13 | Probe RC-6 | |
14 | ---------------- | |
15 | 0 IR | |
16 | 1 Raw | |
17 | ||
18 | The data was captured using a TSOP1736 directly connected to channel 0. | |
19 | For comparison a phototransistor is connected to channel 1. Only channel 0 | |
20 | should be used for decoding. | |
21 | ||
22 | ||
23 | kathrein_RC674_numbers.sr | |
24 | ------------------------- | |
25 | ||
26 | This capture was taken with a Kathrein RC(U)674 remote control. The | |
27 | sequence of keys is "power", 1, 2, ..., 9, 0. | |
28 | ||
29 | Note that this remote uses Mode 6B and does not make use of the | |
30 | integrated toggle bit, but uses the first data bit for that purpose. |