]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the sigrok project. | |
3 | * | |
4 | * Copyright (C) 2012 Bert Vermeulen <bert@biot.com> | |
5 | * With protocol information from the hantekdso project, | |
6 | * Copyright (C) 2008 Oleg Khudyakov <prcoder@gmail.com> | |
7 | * | |
8 | * This program is free software: you can redistribute it and/or modify | |
9 | * it under the terms of the GNU General Public License as published by | |
10 | * the Free Software Foundation, either version 3 of the License, or | |
11 | * (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
20 | */ | |
21 | ||
22 | #ifndef LIBSIGROK_HARDWARE_HANTEK_DSO_H | |
23 | #define LIBSIGROK_HARDWARE_HANTEK_DSO_H | |
24 | ||
25 | #define USB_INTERFACE 0 | |
26 | #define USB_CONFIGURATION 1 | |
27 | #define DSO_EP_IN 0x86 | |
28 | #define DSO_EP_OUT 0x02 | |
29 | #define NUM_PROBES 2 | |
30 | ||
31 | /* FX2 renumeration delay in ms */ | |
32 | #define MAX_RENUM_DELAY_MS 3000 | |
33 | ||
34 | #define MAX_CAPTURE_EMPTY 3 | |
35 | ||
36 | #define DEFAULT_VOLTAGE VDIV_500MV | |
37 | #define DEFAULT_FRAMESIZE FRAMESIZE_SMALL | |
38 | #define DEFAULT_TIMEBASE TIME_100us | |
39 | #define DEFAULT_TRIGGER_SOURCE "CH1" | |
40 | #define DEFAULT_COUPLING COUPLING_DC | |
41 | #define DEFAULT_HORIZ_TRIGGERPOS 0.5 | |
42 | #define DEFAULT_VERT_OFFSET 0.5 | |
43 | #define DEFAULT_VERT_TRIGGERPOS 0.5 | |
44 | ||
45 | #define MAX_VERT_TRIGGER 0xfe | |
46 | ||
47 | /* Hantek DSO-specific protocol values */ | |
48 | #define EEPROM_CHANNEL_OFFSETS 0x08 | |
49 | ||
50 | #define FRAMESIZE_SMALL 10240 | |
51 | #define FRAMESIZE_LARGE 32768 | |
52 | ||
53 | enum control_requests { | |
54 | CTRL_READ_EEPROM = 0xa2, | |
55 | CTRL_GETSPEED = 0xb2, | |
56 | CTRL_BEGINCOMMAND = 0xb3, | |
57 | CTRL_SETOFFSET = 0xb4, | |
58 | CTRL_SETRELAYS = 0xb5, | |
59 | }; | |
60 | ||
61 | enum dso_commands { | |
62 | CMD_SET_FILTERS = 0, | |
63 | CMD_SET_TRIGGER_SAMPLERATE, | |
64 | CMD_FORCE_TRIGGER, | |
65 | CMD_CAPTURE_START, | |
66 | CMD_ENABLE_TRIGGER, | |
67 | CMD_GET_CHANNELDATA, | |
68 | CMD_GET_CAPTURESTATE, | |
69 | CMD_SET_VOLTAGE, | |
70 | /* unused */ | |
71 | cmdSetLogicalData, | |
72 | cmdGetLogicalData, | |
73 | }; | |
74 | ||
75 | /* Must match the coupling table. */ | |
76 | enum couplings { | |
77 | COUPLING_AC = 0, | |
78 | COUPLING_DC, | |
79 | /* TODO not used, how to enable? */ | |
80 | COUPLING_GND, | |
81 | }; | |
82 | ||
83 | /* Must match the timebases table. */ | |
84 | enum time_bases { | |
85 | TIME_10us = 0, | |
86 | TIME_20us, | |
87 | TIME_40us, | |
88 | TIME_100us, | |
89 | TIME_200us, | |
90 | TIME_400us, | |
91 | TIME_1ms, | |
92 | TIME_2ms, | |
93 | TIME_4ms, | |
94 | TIME_10ms, | |
95 | TIME_20ms, | |
96 | TIME_40ms, | |
97 | TIME_100ms, | |
98 | TIME_200ms, | |
99 | TIME_400ms, | |
100 | }; | |
101 | ||
102 | /* Must match the vdivs table. */ | |
103 | enum { | |
104 | VDIV_10MV, | |
105 | VDIV_20MV, | |
106 | VDIV_50MV, | |
107 | VDIV_100MV, | |
108 | VDIV_200MV, | |
109 | VDIV_500MV, | |
110 | VDIV_1V, | |
111 | VDIV_2V, | |
112 | VDIV_5V, | |
113 | }; | |
114 | ||
115 | enum trigger_slopes { | |
116 | SLOPE_POSITIVE = 0, | |
117 | SLOPE_NEGATIVE, | |
118 | }; | |
119 | ||
120 | enum trigger_sources { | |
121 | TRIGGER_CH2 = 0, | |
122 | TRIGGER_CH1, | |
123 | TRIGGER_EXT, | |
124 | }; | |
125 | ||
126 | enum capturestates { | |
127 | CAPTURE_EMPTY = 0, | |
128 | CAPTURE_FILLING = 1, | |
129 | CAPTURE_READY_8BIT = 2, | |
130 | CAPTURE_READY_9BIT = 7, | |
131 | CAPTURE_TIMEOUT = 127, | |
132 | CAPTURE_UNKNOWN = 255, | |
133 | }; | |
134 | ||
135 | enum triggermodes { | |
136 | TRIGGERMODE_AUTO, | |
137 | TRIGGERMODE_NORMAL, | |
138 | TRIGGERMODE_SINGLE, | |
139 | }; | |
140 | ||
141 | enum states { | |
142 | IDLE, | |
143 | NEW_CAPTURE, | |
144 | CAPTURE, | |
145 | FETCH_DATA, | |
146 | STOPPING, | |
147 | }; | |
148 | ||
149 | struct dso_profile { | |
150 | /* VID/PID after cold boot */ | |
151 | uint16_t orig_vid; | |
152 | uint16_t orig_pid; | |
153 | /* VID/PID after firmware upload */ | |
154 | uint16_t fw_vid; | |
155 | uint16_t fw_pid; | |
156 | char *vendor; | |
157 | char *model; | |
158 | char *firmware; | |
159 | }; | |
160 | ||
161 | struct dev_context { | |
162 | const struct dso_profile *profile; | |
163 | struct sr_usb_dev_inst *usb; | |
164 | void *cb_data; | |
165 | uint64_t limit_frames; | |
166 | uint64_t num_frames; | |
167 | /* We can't keep track of an FX2-based device after upgrading | |
168 | * the firmware (it re-enumerates into a different device address | |
169 | * after the upgrade) this is like a global lock. No device will open | |
170 | * until a proper delay after the last device was upgraded. | |
171 | */ | |
172 | int64_t fw_updated; | |
173 | int epin_maxpacketsize; | |
174 | int capture_empty_count; | |
175 | int dev_state; | |
176 | ||
177 | /* Oscilloscope settings. */ | |
178 | int timebase; | |
179 | gboolean ch1_enabled; | |
180 | gboolean ch2_enabled; | |
181 | int voltage_ch1; | |
182 | int voltage_ch2; | |
183 | int coupling_ch1; | |
184 | int coupling_ch2; | |
185 | // voltage offset (vertical position) | |
186 | float voffset_ch1; | |
187 | float voffset_ch2; | |
188 | float voffset_trigger; | |
189 | uint16_t channel_levels[2][9][2]; | |
190 | unsigned int framesize; | |
191 | gboolean filter_ch1; | |
192 | gboolean filter_ch2; | |
193 | gboolean filter_trigger; | |
194 | int triggerslope; | |
195 | char *triggersource; | |
196 | float triggerposition; | |
197 | int triggermode; | |
198 | ||
199 | /* Frame transfer */ | |
200 | unsigned int samp_received; | |
201 | unsigned int samp_buffered; | |
202 | unsigned int trigger_offset; | |
203 | unsigned char *framebuf; | |
204 | }; | |
205 | ||
206 | SR_PRIV int dso_open(struct sr_dev_inst *sdi); | |
207 | SR_PRIV void dso_close(struct sr_dev_inst *sdi); | |
208 | SR_PRIV int dso_enable_trigger(struct dev_context *devc); | |
209 | SR_PRIV int dso_force_trigger(struct dev_context *devc); | |
210 | SR_PRIV int dso_init(struct dev_context *devc); | |
211 | SR_PRIV int dso_get_capturestate(struct dev_context *devc, | |
212 | uint8_t *capturestate, uint32_t *trigger_offset); | |
213 | SR_PRIV int dso_capture_start(struct dev_context *devc); | |
214 | SR_PRIV int dso_get_channeldata(struct dev_context *devc, | |
215 | libusb_transfer_cb_fn cb); | |
216 | ||
217 | #endif |