]>
Commit | Line | Data |
---|---|---|
1 | /* | |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de> | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
19 | */ | |
20 | ||
21 | /* | |
22 | * Cyrustek ES51922 protocol parser. | |
23 | * | |
24 | * Communication parameters: Unidirectional, 19230/7o1 | |
25 | */ | |
26 | ||
27 | #include <string.h> | |
28 | #include <ctype.h> | |
29 | #include <math.h> | |
30 | #include <glib.h> | |
31 | #include "libsigrok.h" | |
32 | #include "libsigrok-internal.h" | |
33 | ||
34 | #define LOG_PREFIX "es51922" | |
35 | ||
36 | /* Factors for the respective measurement mode (0 means "invalid"). */ | |
37 | static const float factors[8][8] = { | |
38 | {1e-4, 1e-3, 1e-2, 1e-1, 1e-5, 0, 0, 0}, /* V */ | |
39 | {1e-8, 1e-7, 0, 0, 0, 0, 0, 0}, /* uA */ | |
40 | {1e-6, 1e-5, 0, 0, 0, 0, 0, 0}, /* mA */ | |
41 | {1e-3, 0, 0, 0, 0, 0, 0, 0}, /* 22A */ | |
42 | {1e-4, 1e-3, 1e-2, 1e-1, 1, 0, 0, 0}, /* Manual A */ | |
43 | {1e-2, 1e-1, 1, 1e1, 1e2, 1e3, 1e4, 0}, /* Resistance */ | |
44 | {1e-2, 1e-1, 0, 1, 1e1, 1e2, 1e3, 1e4}, /* Frequency */ | |
45 | {1e-12, 1e-11, 1e-10, 1e-9, 1e-8, 1e-7, 1e-6, 1e-5}, /* Capacitance */ | |
46 | }; | |
47 | ||
48 | static int parse_value(const uint8_t *buf, float *result) | |
49 | { | |
50 | int sign, intval; | |
51 | float floatval; | |
52 | ||
53 | /* | |
54 | * Bytes 1-5: Value (5 decimal digits) | |
55 | * | |
56 | * Over limit: "0L." on the display, "22580" as protocol "digits". | |
57 | * (chip max. value is 22000, so 22580 is out of range) | |
58 | * | |
59 | * Example: "OL.", auto-range mega-ohm mode | |
60 | * Hex: 36 32 32 35 38 30 33 31 30 30 32 30 0d 0a | |
61 | * ASCII: 2 2 5 8 0 | |
62 | */ | |
63 | if (!strncmp((const char *)&buf[1], "22580", 5)) { | |
64 | sr_spew("Over limit."); | |
65 | *result = INFINITY; | |
66 | return SR_OK; | |
67 | } else if (!isdigit(buf[1]) || !isdigit(buf[2]) || | |
68 | !isdigit(buf[3]) || !isdigit(buf[4]) || !isdigit(buf[5])) { | |
69 | sr_err("Value contained invalid digits: %02x %02x %02x %02x " | |
70 | "%02x (%c %c %c %c %c).", | |
71 | buf[1], buf[2], buf[3], buf[4], buf[5]); | |
72 | return SR_ERR; | |
73 | } | |
74 | intval = 0; | |
75 | intval += (buf[1] - '0') * 10000; | |
76 | intval += (buf[2] - '0') * 1000; | |
77 | intval += (buf[3] - '0') * 100; | |
78 | intval += (buf[4] - '0') * 10; | |
79 | intval += (buf[5] - '0') * 1; | |
80 | ||
81 | floatval = (float)intval; | |
82 | ||
83 | /* Note: The decimal point position will be parsed later. */ | |
84 | ||
85 | /* Byte 7: Sign bit (and other stuff) */ | |
86 | sign = ((buf[7] & (1 << 2)) != 0) ? -1 : 1; | |
87 | ||
88 | /* Apply sign. */ | |
89 | floatval *= sign; | |
90 | ||
91 | sr_spew("The display value is %f.", floatval); | |
92 | ||
93 | *result = floatval; | |
94 | ||
95 | return SR_OK; | |
96 | } | |
97 | ||
98 | static int parse_range(uint8_t b, float *floatval, | |
99 | const struct es51922_info *info) | |
100 | { | |
101 | int idx, mode; | |
102 | ||
103 | idx = b - '0'; | |
104 | ||
105 | if (!(idx >= 0 && idx <= 7)) { | |
106 | sr_dbg("Invalid range byte / index: 0x%02x / 0x%02x.", b, idx); | |
107 | return SR_ERR; | |
108 | } | |
109 | ||
110 | /* Parse range byte (depends on the measurement mode). */ | |
111 | if (info->is_voltage) | |
112 | mode = 0; /* V */ | |
113 | else if (info->is_current && info->is_micro) | |
114 | mode = 1; /* uA */ | |
115 | else if (info->is_current && info->is_milli) | |
116 | mode = 2; /* mA */ | |
117 | else if (info->is_current && !info->is_micro && !info->is_milli) | |
118 | mode = 3; /* 22A */ | |
119 | else if (info->is_current && !info->is_auto) | |
120 | mode = 4; /* Manual A */ | |
121 | else if (info->is_resistance) | |
122 | mode = 5; /* Resistance */ | |
123 | else if (info->is_frequency) | |
124 | mode = 6; /* Frequency */ | |
125 | else if (info->is_capacitance) | |
126 | mode = 7; /* Capacitance */ | |
127 | else { | |
128 | sr_dbg("Invalid mode, range byte was: 0x%02x.", b); | |
129 | return SR_ERR; | |
130 | } | |
131 | ||
132 | if (factors[mode][idx] == 0) { | |
133 | sr_dbg("Invalid factor for range byte: 0x%02x.", b); | |
134 | return SR_ERR; | |
135 | } | |
136 | ||
137 | /* Apply respective factor (mode-dependent) on the value. */ | |
138 | *floatval *= factors[mode][idx]; | |
139 | sr_dbg("Applying factor %f, new value is %f.", | |
140 | factors[mode][idx], *floatval); | |
141 | ||
142 | return SR_OK; | |
143 | } | |
144 | ||
145 | static void parse_flags(const uint8_t *buf, struct es51922_info *info) | |
146 | { | |
147 | /* Get is_judge and is_vbar early on, we'll need it. */ | |
148 | info->is_judge = (buf[7] & (1 << 3)) != 0; | |
149 | info->is_vbar = (buf[11] & (1 << 2)) != 0; | |
150 | ||
151 | /* Byte 6: Function */ | |
152 | switch (buf[6]) { | |
153 | case 0x3b: /* V */ | |
154 | info->is_voltage = TRUE; | |
155 | break; | |
156 | case 0x3d: /* uA */ | |
157 | info->is_auto = info->is_micro = info->is_current = TRUE; | |
158 | break; | |
159 | case 0x3f: /* mA */ | |
160 | info->is_auto = info->is_milli = info->is_current = TRUE; | |
161 | break; | |
162 | case 0x30: /* 22A */ | |
163 | info->is_current = TRUE; | |
164 | break; | |
165 | case 0x39: /* Manual A */ | |
166 | info->is_auto = FALSE; /* Manual mode */ | |
167 | info->is_current = TRUE; | |
168 | break; | |
169 | case 0x33: /* Resistance */ | |
170 | info->is_resistance = TRUE; | |
171 | break; | |
172 | case 0x35: /* Continuity */ | |
173 | info->is_continuity = TRUE; | |
174 | break; | |
175 | case 0x31: /* Diode */ | |
176 | info->is_diode = TRUE; | |
177 | break; | |
178 | case 0x32: /* Frequency / duty cycle */ | |
179 | if (info->is_judge) | |
180 | info->is_frequency = TRUE; | |
181 | else | |
182 | info->is_duty_cycle = TRUE; | |
183 | break; | |
184 | case 0x36: /* Capacitance */ | |
185 | info->is_capacitance = TRUE; | |
186 | break; | |
187 | case 0x34: /* Temperature */ | |
188 | info->is_temperature = TRUE; | |
189 | if (info->is_judge) | |
190 | info->is_celsius = TRUE; | |
191 | else | |
192 | info->is_fahrenheit = TRUE; | |
193 | /* IMPORTANT: The digits always represent Celsius! */ | |
194 | break; | |
195 | case 0x3e: /* ADP */ | |
196 | info->is_adp = TRUE; | |
197 | break; | |
198 | default: | |
199 | sr_err("Invalid function byte: 0x%02x.", buf[6]); | |
200 | break; | |
201 | } | |
202 | ||
203 | /* Byte 7: Status */ | |
204 | /* Bits [6:4]: Always 0b011 */ | |
205 | info->is_judge = (buf[7] & (1 << 3)) != 0; | |
206 | info->is_sign = (buf[7] & (1 << 2)) != 0; | |
207 | info->is_batt = (buf[7] & (1 << 1)) != 0; /* Battery low */ | |
208 | info->is_ol = (buf[7] & (1 << 0)) != 0; /* Input overflow */ | |
209 | ||
210 | /* Byte 8: Option 1 */ | |
211 | /* Bits [6:4]: Always 0b011 */ | |
212 | info->is_max = (buf[8] & (1 << 3)) != 0; | |
213 | info->is_min = (buf[8] & (1 << 2)) != 0; | |
214 | info->is_rel = (buf[8] & (1 << 1)) != 0; | |
215 | info->is_rmr = (buf[8] & (1 << 0)) != 0; | |
216 | ||
217 | /* Byte 9: Option 2 */ | |
218 | /* Bits [6:4]: Always 0b011 */ | |
219 | info->is_ul = (buf[9] & (1 << 3)) != 0; | |
220 | info->is_pmax = (buf[9] & (1 << 2)) != 0; /* Max. peak value */ | |
221 | info->is_pmin = (buf[9] & (1 << 1)) != 0; /* Min. peak value */ | |
222 | /* Bit 0: Always 0 */ | |
223 | ||
224 | /* Byte 10: Option 3 */ | |
225 | /* Bits [6:4]: Always 0b011 */ | |
226 | info->is_dc = (buf[10] & (1 << 3)) != 0; | |
227 | info->is_ac = (buf[10] & (1 << 2)) != 0; | |
228 | info->is_auto = (buf[10] & (1 << 1)) != 0; | |
229 | info->is_vahz = (buf[10] & (1 << 0)) != 0; | |
230 | ||
231 | /* Byte 11: Option 4 */ | |
232 | /* Bits [6:3]: Always 0b0110 */ | |
233 | info->is_vbar = (buf[11] & (1 << 2)) != 0; | |
234 | info->is_hold = (buf[11] & (1 << 1)) != 0; | |
235 | info->is_lpf = (buf[11] & (1 << 0)) != 0; /* Low pass filter on */ | |
236 | ||
237 | /* Byte 12: Always '\r' (carriage return, 0x0d, 13) */ | |
238 | ||
239 | /* Byte 13: Always '\n' (newline, 0x0a, 10) */ | |
240 | } | |
241 | ||
242 | static void handle_flags(struct sr_datafeed_analog *analog, | |
243 | float *floatval, const struct es51922_info *info) | |
244 | { | |
245 | /* | |
246 | * Note: is_micro etc. are not used directly to multiply/divide | |
247 | * floatval, this is handled via parse_range() and factors[][]. | |
248 | */ | |
249 | ||
250 | /* Measurement modes */ | |
251 | if (info->is_voltage) { | |
252 | analog->mq = SR_MQ_VOLTAGE; | |
253 | analog->unit = SR_UNIT_VOLT; | |
254 | } | |
255 | if (info->is_current) { | |
256 | analog->mq = SR_MQ_CURRENT; | |
257 | analog->unit = SR_UNIT_AMPERE; | |
258 | } | |
259 | if (info->is_resistance) { | |
260 | analog->mq = SR_MQ_RESISTANCE; | |
261 | analog->unit = SR_UNIT_OHM; | |
262 | } | |
263 | if (info->is_frequency) { | |
264 | analog->mq = SR_MQ_FREQUENCY; | |
265 | analog->unit = SR_UNIT_HERTZ; | |
266 | } | |
267 | if (info->is_capacitance) { | |
268 | analog->mq = SR_MQ_CAPACITANCE; | |
269 | analog->unit = SR_UNIT_FARAD; | |
270 | } | |
271 | if (info->is_temperature && info->is_celsius) { | |
272 | analog->mq = SR_MQ_TEMPERATURE; | |
273 | analog->unit = SR_UNIT_CELSIUS; | |
274 | } | |
275 | if (info->is_temperature && info->is_fahrenheit) { | |
276 | analog->mq = SR_MQ_TEMPERATURE; | |
277 | analog->unit = SR_UNIT_FAHRENHEIT; | |
278 | } | |
279 | if (info->is_continuity) { | |
280 | analog->mq = SR_MQ_CONTINUITY; | |
281 | analog->unit = SR_UNIT_BOOLEAN; | |
282 | *floatval = (*floatval < 0.0) ? 0.0 : 1.0; | |
283 | } | |
284 | if (info->is_diode) { | |
285 | analog->mq = SR_MQ_VOLTAGE; | |
286 | analog->unit = SR_UNIT_VOLT; | |
287 | } | |
288 | if (info->is_duty_cycle) { | |
289 | analog->mq = SR_MQ_DUTY_CYCLE; | |
290 | analog->unit = SR_UNIT_PERCENTAGE; | |
291 | } | |
292 | ||
293 | /* Measurement related flags */ | |
294 | if (info->is_ac) | |
295 | analog->mqflags |= SR_MQFLAG_AC; | |
296 | if (info->is_dc) | |
297 | analog->mqflags |= SR_MQFLAG_DC; | |
298 | if (info->is_auto) | |
299 | analog->mqflags |= SR_MQFLAG_AUTORANGE; | |
300 | if (info->is_diode) | |
301 | analog->mqflags |= SR_MQFLAG_DIODE; | |
302 | if (info->is_hold) | |
303 | /* | |
304 | * Note: HOLD only affects the number displayed on the LCD, | |
305 | * but not the value sent via the protocol! It also does not | |
306 | * affect the bargraph on the LCD. | |
307 | */ | |
308 | analog->mqflags |= SR_MQFLAG_HOLD; | |
309 | if (info->is_max) | |
310 | analog->mqflags |= SR_MQFLAG_MAX; | |
311 | if (info->is_min) | |
312 | analog->mqflags |= SR_MQFLAG_MIN; | |
313 | if (info->is_rel) | |
314 | analog->mqflags |= SR_MQFLAG_RELATIVE; | |
315 | ||
316 | /* Other flags */ | |
317 | if (info->is_judge) | |
318 | sr_spew("Judge bit is set."); | |
319 | if (info->is_batt) | |
320 | sr_spew("Battery is low."); | |
321 | if (info->is_ol) | |
322 | sr_spew("Input overflow."); | |
323 | if (info->is_pmax) | |
324 | sr_spew("pMAX active, LCD shows max. peak value."); | |
325 | if (info->is_pmin) | |
326 | sr_spew("pMIN active, LCD shows min. peak value."); | |
327 | if (info->is_vahz) | |
328 | sr_spew("VAHZ active."); | |
329 | if (info->is_vbar) | |
330 | sr_spew("VBAR active."); | |
331 | if (info->is_lpf) | |
332 | sr_spew("Low-pass filter feature is active."); | |
333 | } | |
334 | ||
335 | static gboolean flags_valid(const struct es51922_info *info) | |
336 | { | |
337 | int count; | |
338 | ||
339 | /* Does the packet have more than one multiplier? */ | |
340 | count = 0; | |
341 | count += (info->is_nano) ? 1 : 0; | |
342 | count += (info->is_micro) ? 1 : 0; | |
343 | count += (info->is_milli) ? 1 : 0; | |
344 | /* Note: No 'kilo' or 'mega' bits per se in this protocol. */ | |
345 | if (count > 1) { | |
346 | sr_err("More than one multiplier detected in packet."); | |
347 | return FALSE; | |
348 | } | |
349 | ||
350 | /* Does the packet "measure" more than one type of value? */ | |
351 | count = 0; | |
352 | count += (info->is_voltage) ? 1 : 0; | |
353 | count += (info->is_current) ? 1 : 0; | |
354 | count += (info->is_resistance) ? 1 : 0; | |
355 | count += (info->is_frequency) ? 1 : 0; | |
356 | count += (info->is_capacitance) ? 1 : 0; | |
357 | count += (info->is_temperature) ? 1 : 0; | |
358 | count += (info->is_continuity) ? 1 : 0; | |
359 | count += (info->is_diode) ? 1 : 0; | |
360 | count += (info->is_duty_cycle) ? 1 : 0; | |
361 | if (count > 1) { | |
362 | sr_err("More than one measurement type detected in packet."); | |
363 | return FALSE; | |
364 | } | |
365 | ||
366 | /* Both AC and DC set? */ | |
367 | if (info->is_ac && info->is_dc) { | |
368 | sr_err("Both AC and DC flags detected in packet."); | |
369 | return FALSE; | |
370 | } | |
371 | ||
372 | return TRUE; | |
373 | } | |
374 | ||
375 | SR_PRIV gboolean sr_es51922_packet_valid(const uint8_t *buf) | |
376 | { | |
377 | struct es51922_info info; | |
378 | ||
379 | memset(&info, 0x00, sizeof(struct es51922_info)); | |
380 | parse_flags(buf, &info); | |
381 | ||
382 | if (!flags_valid(&info)) | |
383 | return FALSE; | |
384 | ||
385 | if (buf[12] != '\r' || buf[13] != '\n') { | |
386 | sr_spew("Packet doesn't end with \\r\\n."); | |
387 | return FALSE; | |
388 | } | |
389 | ||
390 | return TRUE; | |
391 | } | |
392 | ||
393 | /** | |
394 | * Parse a protocol packet. | |
395 | * | |
396 | * @param buf Buffer containing the protocol packet. Must not be NULL. | |
397 | * @param floatval Pointer to a float variable. That variable will contain the | |
398 | * result value upon parsing success. Must not be NULL. | |
399 | * @param analog Pointer to a struct sr_datafeed_analog. The struct will be | |
400 | * filled with data according to the protocol packet. | |
401 | * Must not be NULL. | |
402 | * @param info Pointer to a struct es51922_info. The struct will be filled | |
403 | * with data according to the protocol packet. Must not be NULL. | |
404 | * | |
405 | * @return SR_OK upon success, SR_ERR upon failure. Upon errors, the | |
406 | * 'analog' variable contents are undefined and should not be used. | |
407 | */ | |
408 | SR_PRIV int sr_es51922_parse(const uint8_t *buf, float *floatval, | |
409 | struct sr_datafeed_analog *analog, void *info) | |
410 | { | |
411 | int ret; | |
412 | struct es51922_info *info_local; | |
413 | ||
414 | info_local = (struct es51922_info *)info; | |
415 | ||
416 | if ((ret = parse_value(buf, floatval)) != SR_OK) { | |
417 | sr_err("Error parsing value: %d.", ret); | |
418 | return ret; | |
419 | } | |
420 | ||
421 | memset(info_local, 0x00, sizeof(struct es51922_info)); | |
422 | parse_flags(buf, info_local); | |
423 | handle_flags(analog, floatval, info_local); | |
424 | ||
425 | return parse_range(buf[0], floatval, info_local); | |
426 | } |