]>
Commit | Line | Data |
---|---|---|
1 | 0.3.0 (2014-05-06) | |
2 | ------------------ | |
3 | ||
4 | Note: This release DOES change the libsigrok API. That means it is NOT | |
5 | backwards-compatible and frontends will need updates. | |
6 | ||
7 | * New supported hardware: | |
8 | - Logic analyzers: | |
9 | - ChronoVu LA16 | |
10 | - Sysclk LWLA1034 | |
11 | - Oscilloscopes: | |
12 | - Agilent DSO1000 series (various models) | |
13 | - Hameg HMO compact series (various models) | |
14 | - Rigol DS2000 series (various models) | |
15 | - Rigol VS5000 series (various models) | |
16 | - Multimeters: | |
17 | - BBC Goerz Metrawatt M2110 | |
18 | - Brymen BM869 | |
19 | - Fluke 189 | |
20 | - Gossen Metrawatt MetraHIT 1x/2x series (various models) | |
21 | - Tenma 72-7745 (rebadged UNI-T UT60E) | |
22 | - Tenma 72-7750 (rebadged UNI-T UT60G) | |
23 | - UNI-T UT60G | |
24 | - UNI-T UT61B | |
25 | - UNI-T UT61C | |
26 | - V&A VA40B | |
27 | - Voltcraft M-3650CR | |
28 | - Voltcraft ME-42 | |
29 | - Thermometers: | |
30 | - APPA 55II | |
31 | - Programmable power supplies: | |
32 | - Atten PPS3000 series (various models, tested on PPS3203T-3S). | |
33 | - Conrad DIGI 35 CPU | |
34 | * Add support for channel groups. | |
35 | * Add generic SCPI backend code which can be used via various transports: | |
36 | - Serial ports | |
37 | - USBTMC | |
38 | - TCP/RAW | |
39 | - TCP/Rigol (Rigol-VS5000 series specific) | |
40 | - VXI | |
41 | - librevisa | |
42 | * udev rules file: Add entries for newly supported hardware. | |
43 | * New config keys: | |
44 | - SR_CONF_DEMODULATOR | |
45 | - SR_CONF_CENTER_FREQUENCY | |
46 | - SR_CONF_NUM_LOGIC_CHANNELS | |
47 | - SR_CONF_NUM_ANALOG_CHANNELS | |
48 | - SR_CONF_CLOCK_EDGE | |
49 | - SR_CONF_POWER_SUPPLY | |
50 | - SR_CONF_OUTPUT_VOLTAGE | |
51 | - SR_CONF_OUTPUT_VOLTAGE_MAX | |
52 | - SR_CONF_OUTPUT_CURRENT | |
53 | - SR_CONF_OUTPUT_CURRENT_MAX | |
54 | - SR_CONF_OUTPUT_ENABLED | |
55 | - SR_CONF_OUTPUT_CHANNEL | |
56 | - SR_CONF_OVER_VOLTAGE_PROTECTION | |
57 | - SR_CONF_OVER_CURRENT_PROTECTION | |
58 | - SR_CONF_DEVICE_MODE | |
59 | - SR_CONF_TEST_MODE | |
60 | * New config info types: | |
61 | - SR_T_INT32 | |
62 | * New measurement quantity keys: | |
63 | - SR_MQ_TIME | |
64 | * New measurement quantity flags: | |
65 | - SR_MQFLAG_DURATION | |
66 | - SR_MQFLAG_AVG | |
67 | * New device instance types: | |
68 | - SR_INST_SCPI | |
69 | * New error codes: | |
70 | - SR_ERR_CHANNEL_GROUP | |
71 | ∗ The SR_T_CHAR config type has been renamed to SR_T_STRING. | |
72 | * New build dependencies: | |
73 | - libserialport >= 0.1.0 (optional). | |
74 | - All drivers that talk to serial ports now require libserialport. | |
75 | - If libserialport is not found, those drivers will not be built. | |
76 | - librevisa >= 0.0.20130812 (optional, only used by some drivers). | |
77 | * Dropped build dependecies: | |
78 | - libasound2 is no longer required (only the removed alsa driver used it). | |
79 | - libudev is no longer required (only the removed link-mso19 driver used it). | |
80 | * Serial port handling code: | |
81 | - Add support for 5/6 data bits and non-standard baud rates. | |
82 | - Fix an issue related to nonblocking reads (bug #188). | |
83 | - Fix an 'invalid arguments' condition causing problems (bug #192). | |
84 | * alsa: This driver was removed (also fixes bugs #28, #61, #96, #114). | |
85 | * asix-sigma: | |
86 | - Publish SR_CONF_CAPTURE_RATIO correctly (bugs #287, #291). | |
87 | - Don't set invalid config options (bug #86). | |
88 | - Various other bugfixes. | |
89 | * cem-dt-885x: Fix a code portability issue (bug #267). | |
90 | * chronovu-la: | |
91 | - Rename the 'chronovu-la8' driver to 'chronovu-la'. | |
92 | - Add support for the ChronoVu LA16. | |
93 | - Fix a segfault when doing multiple acquisitions on an LA8 (bug #247). | |
94 | - Document that streaming is not possible for LA8/LA16 (bug #261). | |
95 | * demo: | |
96 | - Add support for analog channels (bug #11). | |
97 | - Make the number of channels user-configurable. | |
98 | - Add per-channel-group options. | |
99 | - Implement analog sample patterns: sine, triangle, sawtooth. | |
100 | - Fix a samplerate related issue with rates >= 50kHz (bugs #294, #295). | |
101 | - Fix an issue causing data glitches every 40ms (bug #297). | |
102 | - Fix an issue related to channel group handling (bug #262). | |
103 | * digitek-dt4000zc: Fix driver on NetBSD due to missing DTR=1 (bug #189). | |
104 | * fx2lafw: | |
105 | - Fix incorrect unitsize when a trigger fires (bug #182). | |
106 | - Implement config_get() for SR_CONF_LIMIT_SAMPLES. | |
107 | - Don't send more samples than requested to the session bus. | |
108 | * gmc-mh-1x-2x: | |
109 | - Add new (sub)driver 'gmc-mh-2x-bd232'. | |
110 | - Add support for the SI232-II interface. | |
111 | * hameg-hmo: | |
112 | - Fix a build issue on Mac OS X (bug #216). | |
113 | - Various fixes related to frame limit, samplerate, options, etc. | |
114 | * link-mso19: Drop unfinished driver for now (until it starts working). | |
115 | * openbench-logic-sniffer: | |
116 | - Fix a serial port related issue/hang, seen on (e.g.) NetBSD. | |
117 | - Fix an SR_CONF_PATTERN_MODE related problem (bugs #184, #190). | |
118 | - Fix a serial (non)blocking mode issue (bug #231). | |
119 | - Temporarily disable the driver on Windows (needs portability fixes). | |
120 | - Fix an endianness issue in the protocol handling (bug #135). | |
121 | - Fix a sampling issue when (samples % 4) != 0 (bug #200). | |
122 | - Fix an issue occuring when all channels were disabled (bugs #316, #347). | |
123 | - Add an option to turn test patterns off again (bug #293). | |
124 | * rigol-ds: | |
125 | - Rename the 'rigol-ds1xx2' driver to 'rigol-ds'. | |
126 | - Add support for more models and unify the driver code (bug #212). | |
127 | - Add support for RS232 connectivity (previously only USBTMC worked). | |
128 | - Enable the driver on non-Linux platforms since all transports the driver | |
129 | uses are provided by cross-platform code/libs now (e.g. serial, USBTMC). | |
130 | - Add support for 4 channels (required by some models). | |
131 | - Add support for channel groups. | |
132 | - Advertise SR_CONF_LIMIT_FRAMES support. | |
133 | - Fix an issue with SR_DF_END sending. | |
134 | - Enable/disable LA pod when (de)selecting digital channels. | |
135 | - Disable key lock when closing device. | |
136 | - Work around issues due to DS1000 specific protocol changes (bug #283). | |
137 | - Fix incorrect digital channel numbers on some models (bug #269). | |
138 | - Fix an issue with partial data reads (bugs #220, #209, #207). | |
139 | * saleae-logic16: | |
140 | - Fix an issue related to USB device claiming (bug #159). | |
141 | - Don't send more samples than requested to the session bus (bug #350). | |
142 | - Use unitsize 1 (not 2) if none of channels 8-15 are used. | |
143 | * serial-dmm: Fix some parse issues by increasing a timeout. | |
144 | * sysclk-lwla: Fix a sampling issue related to a glib API call (bug #270). | |
145 | * uni-t-ut32x: Fix typo which prevented usage with multiple devices. | |
146 | * victor-dmm: Fix MIN/MAX always being reported (bug #228). | |
147 | * zeroplus-logic-cube: | |
148 | - Add support for 32-channel models and additional memory sizes. | |
149 | - Fix a frontend issue due to missing SR_CONF_CAPTURE_RATIO. | |
150 | - Fix an issue causing pre-trigger garbage data to be sent (bug #222). | |
151 | - Add initial voltage threshold support. | |
152 | * Various drivers: | |
153 | - Expose missing SR_CONF_TRIGGER_TYPE. | |
154 | - Report max. possible number of samples (bugs #197, #258, #263). | |
155 | * Output modules: | |
156 | - Skip analog channels in logic-only output formats. | |
157 | - Remove the obolete output module API, add wrapper calls for the new one. | |
158 | - Stop using the obsolete output API (bugs #288, #47, #48). | |
159 | - Properly receive and handle samplerate metadata (bug #46). | |
160 | * input/vcd: Abort with an error upon > 64 channels (bug #194). | |
161 | * output/vcd: | |
162 | - Fix output for more than 8 channels. | |
163 | - Output timestamp only once per change. | |
164 | - Minor whitespace changes of output files to make them more readable. | |
165 | - Remove bogus $dumpvars and $dumpoff commands. | |
166 | - Various bugfixes and portability fixes. | |
167 | * output/csv: | |
168 | - Remove a 64-channel limit (bug #193). | |
169 | - Fix an issue resulting in incorrect trailing commas (bug #230). | |
170 | - Fix an issue where all timestamps would be zero (bug #35). | |
171 | * Rename 'probe' to 'channel' in all places, since libsigrok supports a lot | |
172 | of gear where 'channel' fits better (bug #259). | |
173 | * Change TRIGGER_SLOPE from SR_T_UINT64 to SR_T_STRING. | |
174 | * Windows support improvements: | |
175 | - Use libserialport (+other backend code) to fix serial devices (bug #91). | |
176 | - Add serial source addition/removal backend code (bug #206). | |
177 | - Add backend code for properly supporting USB based devices. | |
178 | * Fix various memory leaks in the backend code. | |
179 | * Fix some incorrect parsing of floating point numbers in the strutil code. | |
180 | * Fix various endianness issues in backend code and drivers (bug #266). | |
181 | * Fix a few issues related to incorrect parsing with non-ANSI-C locales | |
182 | (bugs #271, #272, #273, #274). | |
183 | * Fix an issue related to data being sent to the libsigrok session which | |
184 | was not a multiple of the unit/sample size (bugs, #289, #290). | |
185 | * Drop the es51922 DMM parser (replaced by the generic es519xx parser). | |
186 | * libsigrok session files: | |
187 | - The libsigrok session file format (for *.sr files) has changed, and the | |
188 | file format 'version' field is bumped to 2. Older libsigrok versions will | |
189 | not be able to handle version 2 files, but new libsigrok versions can | |
190 | handle both version 1 and version 2 files. New libsigrok versions will | |
191 | always write/output version 2 files. | |
192 | - Fix an issue resulting in left-over temporary files (bug #276). | |
193 | - Fix an issue with analog probes (unsupported) in *.sr files (bug #277). | |
194 | - Fix an issue with missing samplerate from session files (bug #275). | |
195 | * Improved API documentation. | |
196 | * Major API changes (overview): | |
197 | - Change various function/macro names related to the probe->channel rename. | |
198 | - Change various functions due to the new channel group feature. | |
199 | - All enums in the public API now have names (e.g. 'enum sr_mqflag'). | |
200 | - The lib no longer defineѕ names with _t suffix (POSIX reserved). | |
201 | - New API calls: | |
202 | - sr_session_dev_list() | |
203 | - sr_session_save_init() | |
204 | - sr_session_append() | |
205 | - sr_config_commit() | |
206 | - sr_output_new() | |
207 | - sr_output_send() | |
208 | - sr_output_free() | |
209 | - Obsoleted and removed API calls: | |
210 | - sr_filter_channels() | |
211 | - 'struct sr_session' is now opaque (contents shouldn't be used directly). | |
212 | - Please see the Doxygen API documentation for further details. | |
213 | * Build system: | |
214 | - Switch to a non-recursive automake setup (fewer files, faster builds). | |
215 | - configure: Clearly mark required and optional libs. | |
216 | ||
217 | 0.2.2 (2013-11-04) | |
218 | ------------------ | |
219 | ||
220 | Note: This release does NOT change the libsigrok API. While new config keys, | |
221 | config info types, and unit codes have been added (additional enum | |
222 | entries / numbers), no existing interfaces were added/changed/removed. | |
223 | Frontends should continue to work fine without recompiling or relinking. | |
224 | ||
225 | * New supported hardware: | |
226 | - Logic analyzers: | |
227 | - Saleae Logic16 | |
228 | - Thermometers: | |
229 | - Center 309 | |
230 | - UNI-T UT325 | |
231 | - Voltcraft K204 | |
232 | - Multimeters: | |
233 | - ISOTECH IDM103N | |
234 | - Metex M-4650CR | |
235 | - Norma DM950 | |
236 | - Voltcraft M-4650CR | |
237 | - Energy meters: | |
238 | - EDF Teleinfo | |
239 | * New config keys: | |
240 | - SR_CONF_VOLTAGE_THRESHOLD | |
241 | - SR_CONF_EXTERNAL_CLOCK | |
242 | - SR_CONF_SWAP | |
243 | - SR_CONF_ENERGYMETER | |
244 | * New config info types: | |
245 | - SR_T_DOUBLE_RANGE | |
246 | * New units: | |
247 | - SR_UNIT_REVOLUTIONS_PER_MINUTE | |
248 | - SR_UNIT_VOLT_AMPERE | |
249 | - SR_UNIT_WATT | |
250 | - SR_UNIT_WATT_HOUR | |
251 | * New input modules: | |
252 | - csv (comma-separated values) | |
253 | * Bump required libzip version to >= 0.10. | |
254 | * uni-t-dmm: This driver now requires the specification of the USB VID/PID | |
255 | of the cable that is used. Example for sigrok-cli: | |
256 | - Old: sigrok-cli --driver voltcraft-vc820 ... | |
257 | - New: sigrok-cli --driver voltcraft-vc820:conn=1a86.e008 ... | |
258 | * openbench-logic-sniffer: | |
259 | - Initial test pattern support (SR_CONF_PATTERN_MODE). | |
260 | - Initial external clock support (SR_CONF_EXTERNAL_CLOCK). | |
261 | - Initial channel swap support (SR_CONF_SWAP). | |
262 | - Various minor fixes and improvements. | |
263 | * When a frontend adds a device instance to a running session, start | |
264 | acquisition on it. This helps with the collectd use-case where devices | |
265 | can be removed and added dynamically while a session is running. | |
266 | * rigol-ds1xx2: Support newer Linux kernels with USBTMC in /sys/class/usbmisc. | |
267 | * rigol-ds1xx2: Also detect the Rigol DS1152E/DS1152D. | |
268 | * agilent-dmm: Fix a segfault happening in certain cases. | |
269 | * output/analog: Support all currently known MQFLAGs. | |
270 | * Fix a minor compile issue due to an incorrect #include. | |
271 | * Fix two compile issues on FreeBSD (bug #185). | |
272 | * es519xx: New generic parser for various Cyrustek DMM ICs. | |
273 | * es51922/fs9721/fs9922/metex14: Use diode MQFLAG (bug #141). | |
274 | * voltcraft-vc830: Fix diode mode handling (bug #142). | |
275 | * Add the missing HACKING file to the tarball. | |
276 | * README.devices: Updates/notes for newly added devices. | |
277 | ||
278 | 0.2.1 (2013-08-07) | |
279 | ------------------ | |
280 | ||
281 | Note: This release does NOT change the libsigrok API. While new config keys, | |
282 | config info types, and error codes have been added (additional enum | |
283 | entries / numbers), no existing interfaces were added/changed/removed. | |
284 | Frontends should continue to work fine without recompiling or relinking. | |
285 | ||
286 | * New supported hardware: | |
287 | - Logic analyzers: | |
288 | - IKALOGIC Scanalogic-2 | |
289 | - IKALOGIC ScanaPLUS | |
290 | - Sound level meters: | |
291 | - CEM DT-8852 | |
292 | - Kecheng KC-330B | |
293 | - Multimeters: | |
294 | - UNI-T UT60A | |
295 | - UNI-T UT60E | |
296 | - Voltcraft M-3650D | |
297 | - Voltcraft VC-830 | |
298 | * Drop the Tecpel DMM-8060 (doesn't have PC connectivity). | |
299 | * New config keys: | |
300 | - SR_CONF_SPL_WEIGHT_FREQ | |
301 | - SR_CONF_SPL_WEIGHT_TIME | |
302 | - SR_CONF_SPL_MEASUREMENT_RANGE | |
303 | - SR_CONF_HOLD_MIN | |
304 | - SR_CONF_HOLD_MAX | |
305 | - SR_CONF_POWER_OFF | |
306 | - SR_CONF_DATA_SOURCE | |
307 | * New config info types: | |
308 | - SR_T_UINT64_RANGE | |
309 | * New error codes: | |
310 | - SR_ERR_TIMEOUT | |
311 | * Always link against libm, the math library (bug #115). | |
312 | * Fix a bug in sr_si_string_u64() at al (bug #73). | |
313 | * output/csv: Fix incorrect probe order. | |
314 | * alsa: Fix a double-free issue (bug #129). | |
315 | * zeroplus-logic-cube: Fix a bug in the driver cleanup code. | |
316 | * ikalogic-scanalogic2: Use GET_REPORT (bug #130). | |
317 | * uni-t-dmm: Fix a bug breaking the UNI-T UT61E (bug #136). | |
318 | * Various internal consistency fixes and code cleanups. | |
319 | * Improved Doxygen documentation. | |
320 | * Fixed various memory leaks. | |
321 | ||
322 | 0.2.0 (2013-05-04) | |
323 | ------------------ | |
324 | ||
325 | Note: This release DOES change the libsigrok API. That means it is NOT | |
326 | backwards-compatible and frontends will need updates. | |
327 | ||
328 | * Support for analog sources (oscilloscopes, DMMs, data loggers) was added. | |
329 | * New supported hardware: | |
330 | - Logic analyzers: | |
331 | - CWAV USBee DX | |
332 | - ZEROPLUS LAP-16128U | |
333 | - Oscilloscopes: | |
334 | - Hantek DSO-2090 (USB scope) | |
335 | - Rigol DS1052D | |
336 | - Rigol DS1052E | |
337 | - Rigol DS1102D | |
338 | - Rigol DS1102E | |
339 | - Multimeters: | |
340 | - Agilent U1231A | |
341 | - Agilent U1232A | |
342 | - Agilent U1233A | |
343 | - Brymen BM857 | |
344 | - Digitek DT4000ZC | |
345 | - Fluke 187 | |
346 | - Fluke 189 | |
347 | - Fluke 287 | |
348 | - Fluke 289 | |
349 | - Fluke ScopeMeter 199B | |
350 | - MASTECH MAS345 | |
351 | - Metex ME-31 | |
352 | - Metex M-3640D | |
353 | - PCE PCE-DM32 | |
354 | - PeakTech 3410 | |
355 | - PeakTech 4370 | |
356 | - RadioShack 22-168 | |
357 | - RadioShack 22-805 | |
358 | - RadioShack 22-812 | |
359 | - Tecpel DMM-8060 | |
360 | - Tecpel DMM-8061 | |
361 | - TekPower TP4000ZC | |
362 | - UNI-T UT61D | |
363 | - UNI-T UT61E | |
364 | - V&A VA18B | |
365 | - Victor 70C | |
366 | - Victor 86C | |
367 | - Voltcraft VC-820 | |
368 | - Voltcraft VC-840 | |
369 | - Sound level meters: | |
370 | - Colead SL-5868P | |
371 | - Tondaj SL-814 | |
372 | - Temperature/humidity/CO loggers: | |
373 | - Lascar EL-USB and EL-USB CO series (various models) | |
374 | - MIC 98581 | |
375 | - MIC 98583 | |
376 | * The limitation of max. 64 digital probes has been removed in many places. | |
377 | * Added generic DMM protocol parsers usable for various DMMs, over various | |
378 | cables and/or transports (e.g. same protocol over serial or USB/HID): | |
379 | - Cyrustek ES51922 binary protocol. | |
380 | - Fortune Semiconductor FS9721_LP3/FS9721B binary protocol. | |
381 | - Fortune Semiconductor FS9922-DMM3/DMM4 binary protocol. | |
382 | - Metex 14-byte ASCII protocol. | |
383 | - RadioShack 22-812 binary protocol. | |
384 | * zeroplus-logic-cube driver: | |
385 | - Fix acquisition at some specific samplerates. Only report valid ones. | |
386 | - Default to a samplerate of 1MHz. | |
387 | - Fix trigger code. | |
388 | - Add pre-trigger (capture ratio) setting. | |
389 | - Add support for the ZEROPLUS LAP-16128U. | |
390 | * fx2lafw driver: | |
391 | - Add support for the CWAV USBee DX. This requires the latest version of | |
392 | the fx2lafw firmware files. | |
393 | - Add support for wide sampling (i.e. 16 probes instead of just 8). | |
394 | - Fix multi-stage (software) triggers. | |
395 | - Fix various memory leaks, firmware upload timeout bugs, and other issues. | |
396 | - Various performance and memory usage improvements in the driver. | |
397 | * chronovu-la8 driver: | |
398 | - Add support for newer LA8 versions with USB VID/PID 0403:8867. | |
399 | * demo driver: | |
400 | - Various bugfixes when setting time/sample limits. | |
401 | * openbench-logic-sniffer driver: | |
402 | - Don't try to scan all available serial ports for OLS devices. Instead, | |
403 | the serial port to use now has to be specified by the user. | |
404 | - Allow disabling RLE. | |
405 | * udev rules file: Add many new entries for additional devices. | |
406 | * New output formats: | |
407 | - analog: Prints analog values and their unit (e.g. from scopes or DMMs). | |
408 | * New input formats: | |
409 | - vcd: Value Change Dump format | |
410 | - wav: Waveform audio file format (for analog data) | |
411 | * 'binary' input format: Add support for a 'samplerate' option. | |
412 | * API related changes: | |
413 | - There is generated Doxygen API documentation now. | |
414 | - The header that frontends should include is: <libsigrok/libsigrok.h>. | |
415 | There are other headers which are installed, but those are not meant to | |
416 | be included directly by the frontends. | |
417 | - There were numerous API changes, additions and removals, too many to list | |
418 | here. Please check the source code or Doxygen API documentation for the | |
419 | current set of API functions. | |
420 | * Serial port code: | |
421 | - Various improvements and fixes related to multiple parameters such as | |
422 | directions, baudrate, flow control, and others. | |
423 | - Add support for more baudrates (e.g. very low ones such as 600/1200) | |
424 | that are used in some devices. | |
425 | - Add support for setting DTR/RTS. | |
426 | * gnuplot files: Add sample files for CWAV USBee DX (for 8/16 bit sampling). | |
427 | * Documentation updates: | |
428 | - Add a README.devices file which contains various notes for users of | |
429 | libsigrok about device- and/or driver-specific issues. | |
430 | - Update README, HACKING, and other documents. | |
431 | - Updated build dependencies list. | |
432 | - The following libs are needed in more recent versions now: | |
433 | - glib (required): Now must be >= 2.32.0. | |
434 | - libusb-1.0 (optional): Now must be >= 1.0.9. | |
435 | - The following new libs were added as (optional) dependencies: | |
436 | - libasound / alsa-lib (optional): >= 1.0 | |
437 | - check (optional, only needed for unit tests): >= 0.9.4 | |
438 | * Portability: | |
439 | - Various compile fixes for Windows, FreeBSD/NetBSD/OpenBSD, and Mac OS X. | |
440 | - Simplify/allow/fix cross-compilation of libsigrok. | |
441 | - Various bugfixes for 32bit systems. | |
442 | - Various endianness fixes. | |
443 | * configure: | |
444 | - Add a --disable-all-drivers option. This can be overridden by | |
445 | additional --enable-<drivername> options to selectively enable only some. | |
446 | - Improve autodetection of libraries, and only enable drivers for which | |
447 | all required libraries were found. | |
448 | * Add a test suite for libsigrok with a few unit tests (the list will grow). | |
449 | ||
450 | 0.1.1 (2012-05-30) | |
451 | ------------------ | |
452 | ||
453 | Note: This release does NOT change the libsigrok API. | |
454 | ||
455 | * The 'saleae-logic' driver (which depends on the Saleae firmware), has | |
456 | been replaced with the new 'fx2lafw' driver, which uses an open-source | |
457 | firmware for Cypress FX2 chips which is also named 'fx2lafw'. | |
458 | Details: http://sigrok.org/wiki/Fx2lafw | |
459 | This new driver (+ firmware) currently supports the following devices: | |
460 | - ARMFLY AX-Pro | |
461 | - Braintechnology USB-LPS | |
462 | - EE Electronics ESLA100 | |
463 | - EE Electronics ESLA201A | |
464 | - Robomotic MiniLogic | |
465 | - Robomotic BugLogic 3 | |
466 | - Saleae Logic | |
467 | - USBee AX | |
468 | - USBee SX | |
469 | - All Cypress FX2 eval boards with stock Cypress VID/PID, including: | |
470 | - Lcsoft Mini Board | |
471 | - Braintechnology USB Interface V2.x | |
472 | Only acquisition with 8 probes is supported so far. Support for 16 probes | |
473 | and support for analog signal acquisition (on devices which have these | |
474 | capabilities) will be added later. | |
475 | * ASIX SIGMA driver: | |
476 | - Add support for the ASIX SIGMA2. This requires the latest version of | |
477 | the SIGMA/SIGMA2 firmware files. | |
478 | Details: http://sigrok.org/wiki/Firmware | |
479 | - Various bugfixes. | |
480 | * ZEROPLUS Logic Cube LAP-C (16032): Fix a segfault. | |
481 | * udev file: Add entries for Robomotic BugLogic 3, Velleman PCSU1000, | |
482 | Ideofy LA-08, ARMFLY AX-Pro, and Braintechnology USB Interface V2.x. | |
483 | * The zlib dependency has been removed (no longer needed). | |
484 | * Fix compiling with "Homebrew" (Mac OS X). | |
485 | * libsigrok now expects firmware files in $prefix/share/sigrok-firmware by | |
486 | default (was $prefix/share/libsigrok/firmware before). | |
487 | * Fix a Makefile.am bug which caused the generated ChangeLog files being | |
488 | accidentally deleted upon 'make distclean'. | |
489 | * ChronoVu LA8 input file format: Improve autodetection of the file format. | |
490 | We now only accept files of the size 8388613 bytes (all LA8 files have | |
491 | exactly this amount of bytes). | |
492 | ||
493 | 0.1.0 (2012-04-17) | |
494 | ------------------ | |
495 | ||
496 | * Initial release. | |
497 |