]>
Commit | Line | Data |
---|---|---|
ab2a2831 UH |
1 | ------------------------------------------------------------------------------- |
2 | Hello World UART output using various options | |
3 | ------------------------------------------------------------------------------- | |
4 | ||
5 | This is a collection of example UART communication (only in one direction). | |
07bbf354 UH |
6 | The repeatedly transmitted data is "Hello World!\r\n", using various settings, |
7 | such as 8n1, 8o1, 8e1, 7o1, 7e1, etc. | |
ab2a2831 | 8 | |
44f6cffb UH |
9 | The hardware sending the data is an Olimex STM32-H103 eval kit with an |
10 | ST STM32 (ARM Cortex-M3) microcontroller. The firmware used is based on a | |
11 | simple libopencm3 UART example. The USART1 (USART1.TX pin) is used. | |
12 | ||
13 | For details see: | |
14 | http://libopencm3.org | |
15 | http://libopencm3.git.sourceforge.net/git/gitweb.cgi?p=libopencm3/libopencm3;a=tree;f=examples/stm32/f1/stm32-h103/usart_printf | |
16 | http://olimex.com/dev/stm32-h103.html | |
17 | ||
ab2a2831 UH |
18 | |
19 | Logic analyzer setup | |
20 | -------------------- | |
21 | ||
22 | The logic analyzer used for capturing is a ChronoVu LA8 at a sample rate | |
23 | of 5MHz (for baud rates 921600 - 230400), 1MHz (for 115200 - 19200), | |
207cc70f | 24 | and 625kHz (for baud rates 9600 - 1200). |
ab2a2831 UH |
25 | |
26 | The ChronoVu LA8 probes were connected to the UART like this: | |
27 | ||
28 | Probe UART | |
29 | ------------------- | |
30 | 0 (green) TX | |
ab2a2831 UH |
31 | |
32 | ||
33 | Data | |
34 | ---- | |
35 | ||
36 | The sigrok command line used was: | |
37 | ||
38 | sigrok-cli -d 0:samplerate=<hz> --samples 8388608 -p '1=TX' -o <file>.sr | |
39 | ||
40 | We capture as many samples as fit into the 8MByte buffer of the logic analyzer. | |
41 |