]>
Commit | Line | Data |
---|---|---|
e1ccfb19 AJ |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2015 Aurelien Jacobs <aurel@gnuage.org> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
6ec6c43b | 20 | #include <config.h> |
e1ccfb19 AJ |
21 | #include "protocol.h" |
22 | ||
ffb580cf AJ |
23 | static const uint32_t scanopts[] = { |
24 | SR_CONF_CONN, | |
25 | SR_CONF_SERIALCOMM, | |
55fb76b3 | 26 | SR_CONF_MODBUSADDR, |
ffb580cf AJ |
27 | }; |
28 | ||
29 | static const uint32_t drvopts[] = { | |
30 | SR_CONF_ELECTRONIC_LOAD, | |
31 | }; | |
32 | ||
33 | static const uint32_t devopts[] = { | |
e91bb0a6 | 34 | SR_CONF_CONTINUOUS, |
ffb580cf AJ |
35 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, |
36 | SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, | |
37 | }; | |
38 | ||
39 | static const uint32_t devopts_cg[] = { | |
40 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
41 | SR_CONF_REGULATION | SR_CONF_GET, | |
42 | SR_CONF_VOLTAGE | SR_CONF_GET, | |
43 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
44 | SR_CONF_CURRENT | SR_CONF_GET, | |
45 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
46 | SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED | SR_CONF_GET, | |
47 | SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE | SR_CONF_GET, | |
48 | SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
49 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET, | |
50 | SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE | SR_CONF_GET, | |
51 | SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD | SR_CONF_GET | SR_CONF_SET, | |
52 | SR_CONF_OVER_TEMPERATURE_PROTECTION | SR_CONF_GET, | |
53 | SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET, | |
54 | }; | |
55 | ||
d9251a2c UH |
56 | /* |
57 | * The IDs in this list are only guessed and needs to be verified | |
58 | * against some real hardware. If at least a few of them matches, | |
59 | * it will probably be safe to enable the others. | |
60 | */ | |
ffb580cf AJ |
61 | static const struct maynuo_m97_model supported_models[] = { |
62 | // { 53, "M9711" , 30, 150, 150 }, | |
63 | // { 54, "M9712" , 30, 150, 300 }, | |
64 | // { 55, "M9712C" , 60, 150, 300 }, | |
65 | // { 56, "M9713" , 120, 150, 600 }, | |
66 | // { 57, "M9712B" , 15, 500, 300 }, | |
67 | // { 58, "M9713B" , 30, 500, 600 }, | |
68 | // { 59, "M9714" , 240, 150, 1200 }, | |
69 | // { 60, "M9714B" , 60, 500, 1200 }, | |
70 | // { 61, "M9715" , 240, 150, 1800 }, | |
71 | // { 62, "M9715B" , 120, 500, 1800 }, | |
72 | // { 63, "M9716" , 240, 150, 2400 }, | |
73 | // { 64, "M9716B" , 120, 500, 2400 }, | |
74 | // { 65, "M9717C" , 480, 150, 3600 }, | |
75 | // { 66, "M9717" , 240, 150, 3600 }, | |
76 | // { 67, "M9717B" , 120, 500, 3600 }, | |
77 | // { 68, "M9718" , 240, 150, 6000 }, | |
78 | // { 69, "M9718B" , 120, 500, 6000 }, | |
79 | // { 70, "M9718D" , 240, 500, 6000 }, | |
80 | // { 71, "M9836" , 500, 150, 20000 }, | |
81 | // { 72, "M9836B" , 240, 500, 20000 }, | |
82 | // { 73, "M9838B" , 240, 500, 50000 }, | |
83 | // { 74, "M9839B" , 240, 500, 100000 }, | |
84 | // { 75, "M9840B" , 500, 500, 200000 }, | |
85 | // { 76, "M9840" , 1500, 150, 200000 }, | |
86 | // { 77, "M9712B30" , 30, 500, 300 }, | |
87 | // { 78, "M9718E" , 120, 600, 6000 }, | |
88 | // { 79, "M9718F" , 480, 150, 6000 }, | |
89 | // { 80, "M9716E" , 480, 150, 3000 }, | |
90 | // { 81, "M9710" , 30, 150, 150 }, | |
91 | // { 82, "M9834" , 500, 150, 10000 }, | |
92 | // { 83, "M9835" , 500, 150, 15000 }, | |
93 | // { 84, "M9835B" , 240, 500, 15000 }, | |
94 | // { 85, "M9837" , 500, 150, 35000 }, | |
95 | // { 86, "M9837B" , 240, 500, 35000 }, | |
96 | // { 87, "M9838" , 500, 150, 50000 }, | |
97 | // { 88, "M9839" , 500, 150, 100000 }, | |
98 | // { 89, "M9835C" , 1000, 150, 15000 }, /* ?? */ | |
99 | // { 90, "M9836C" , 1000, 150, 20000 }, /* ?? */ | |
100 | // { 91, "M9718F-300", 480, 300, 6000 }, /* ?? */ | |
101 | // { 92, "M9836F" , 1000, 150, 20000 }, /* ?? */ | |
102 | // { 93, "M9836E" , 240, 600, 20000 }, /* ?? */ | |
103 | // { 94, "M9717D" , 240, 500, 3600 }, /* ?? */ | |
104 | // { 95, "M9836B-720", 240, 720, 20000 }, /* ?? */ | |
105 | // { 96, "M9834H" , 500, 150, 10000 }, /* ?? */ | |
106 | // { 97, "M9836H" , 500, 150, 20000 }, /* ?? */ | |
107 | // { 98, "M9718F-500", 480, 500, 6000 }, /* ?? */ | |
108 | // { 99, "M9834B" , 240, 500, 10000 }, /* ?? */ | |
109 | // { 100, "M9811" , 30, 150, 200 }, | |
110 | { 101, "M9812" , 30, 150, 300 }, | |
111 | // { 102, "M9812B" , 15, 500, 300 }, | |
112 | }; | |
113 | ||
dd5c48a6 | 114 | static struct sr_dev_driver maynuo_m97_driver_info; |
e1ccfb19 | 115 | |
ffb580cf | 116 | static struct sr_dev_inst *probe_device(struct sr_modbus_dev_inst *modbus) |
e1ccfb19 | 117 | { |
ffb580cf AJ |
118 | const struct maynuo_m97_model *model = NULL; |
119 | struct dev_context *devc; | |
120 | struct sr_dev_inst *sdi; | |
121 | struct sr_channel_group *cg; | |
122 | struct sr_channel *ch; | |
123 | uint16_t id, version; | |
124 | unsigned int i; | |
125 | ||
126 | int ret = maynuo_m97_get_model_version(modbus, &id, &version); | |
127 | if (ret != SR_OK) | |
128 | return NULL; | |
c442ffda | 129 | for (i = 0; i < ARRAY_SIZE(supported_models); i++) |
ffb580cf AJ |
130 | if (id == supported_models[i].id) { |
131 | model = &supported_models[i]; | |
132 | break; | |
133 | } | |
134 | if (model == NULL) { | |
5af975b5 | 135 | sr_err("Unknown model: %d.", id); |
ffb580cf AJ |
136 | return NULL; |
137 | } | |
138 | ||
139 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); | |
45884333 | 140 | sdi->status = SR_ST_INACTIVE; |
ffb580cf AJ |
141 | sdi->vendor = g_strdup("Maynuo"); |
142 | sdi->model = g_strdup(model->name); | |
143 | sdi->version = g_strdup_printf("v%d.%d", version/10, version%10); | |
144 | sdi->conn = modbus; | |
145 | sdi->driver = &maynuo_m97_driver_info; | |
146 | sdi->inst_type = SR_INST_MODBUS; | |
e1ccfb19 | 147 | |
ffb580cf AJ |
148 | cg = g_malloc0(sizeof(struct sr_channel_group)); |
149 | cg->name = g_strdup("1"); | |
150 | sdi->channel_groups = g_slist_append(sdi->channel_groups, cg); | |
e1ccfb19 | 151 | |
ffb580cf AJ |
152 | ch = sr_channel_new(sdi, 0, SR_CHANNEL_ANALOG, TRUE, "V1"); |
153 | cg->channels = g_slist_append(cg->channels, ch); | |
e1ccfb19 | 154 | |
ffb580cf AJ |
155 | ch = sr_channel_new(sdi, 0, SR_CHANNEL_ANALOG, TRUE, "I1"); |
156 | cg->channels = g_slist_append(cg->channels, ch); | |
157 | ||
158 | devc = g_malloc0(sizeof(struct dev_context)); | |
159 | devc->model = model; | |
160 | ||
161 | sdi->priv = devc; | |
162 | ||
163 | return sdi; | |
164 | } | |
165 | ||
166 | static int config_compare(gconstpointer a, gconstpointer b) | |
167 | { | |
168 | const struct sr_config *ac = a, *bc = b; | |
169 | return ac->key != bc->key; | |
170 | } | |
171 | ||
172 | static GSList *scan(struct sr_dev_driver *di, GSList *options) | |
173 | { | |
174 | struct sr_config default_serialcomm = { | |
d9251a2c UH |
175 | .key = SR_CONF_SERIALCOMM, |
176 | .data = g_variant_new_string("9600/8n1"), | |
ffb580cf AJ |
177 | }; |
178 | struct sr_config default_modbusaddr = { | |
d9251a2c UH |
179 | .key = SR_CONF_MODBUSADDR, |
180 | .data = g_variant_new_uint64(1), | |
ffb580cf AJ |
181 | }; |
182 | GSList *opts = options, *devices; | |
183 | ||
184 | if (!g_slist_find_custom(options, &default_serialcomm, config_compare)) | |
185 | opts = g_slist_prepend(opts, &default_serialcomm); | |
186 | if (!g_slist_find_custom(options, &default_modbusaddr, config_compare)) | |
187 | opts = g_slist_prepend(opts, &default_modbusaddr); | |
188 | ||
41812aca | 189 | devices = sr_modbus_scan(di->context, opts, probe_device); |
ffb580cf AJ |
190 | |
191 | while (opts != options) | |
192 | opts = g_slist_delete_link(opts, opts); | |
193 | g_variant_unref(default_serialcomm.data); | |
194 | g_variant_unref(default_modbusaddr.data); | |
e1ccfb19 AJ |
195 | |
196 | return devices; | |
197 | } | |
198 | ||
e1ccfb19 AJ |
199 | static int dev_open(struct sr_dev_inst *sdi) |
200 | { | |
ffb580cf | 201 | struct sr_modbus_dev_inst *modbus = sdi->conn; |
e1ccfb19 | 202 | |
ffb580cf AJ |
203 | if (sr_modbus_open(modbus) < 0) |
204 | return SR_ERR; | |
e1ccfb19 | 205 | |
ffb580cf AJ |
206 | maynuo_m97_set_bit(modbus, PC1, 1); |
207 | ||
e1ccfb19 AJ |
208 | return SR_OK; |
209 | } | |
210 | ||
211 | static int dev_close(struct sr_dev_inst *sdi) | |
212 | { | |
ffb580cf AJ |
213 | struct dev_context *devc; |
214 | struct sr_modbus_dev_inst *modbus; | |
e1ccfb19 | 215 | |
ffb580cf AJ |
216 | modbus = sdi->conn; |
217 | ||
f1ba6b4b UH |
218 | if (!modbus) |
219 | return SR_ERR_BUG; | |
ffb580cf | 220 | |
f1ba6b4b | 221 | devc = sdi->priv; |
ffb580cf | 222 | |
f1ba6b4b UH |
223 | if (devc->expecting_registers) { |
224 | /* Wait for the last data that was requested from the device. */ | |
225 | uint16_t registers[devc->expecting_registers]; | |
226 | sr_modbus_read_holding_registers(modbus, -1, | |
227 | devc->expecting_registers, registers); | |
ffb580cf | 228 | } |
e1ccfb19 | 229 | |
f1ba6b4b UH |
230 | maynuo_m97_set_bit(modbus, PC1, 0); |
231 | ||
232 | return sr_modbus_close(modbus); | |
e1ccfb19 AJ |
233 | } |
234 | ||
dd7a72ea UH |
235 | static int config_get(uint32_t key, GVariant **data, |
236 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
e1ccfb19 | 237 | { |
ffb580cf AJ |
238 | struct dev_context *devc; |
239 | struct sr_modbus_dev_inst *modbus; | |
240 | enum maynuo_m97_mode mode; | |
241 | int ret, ivalue; | |
242 | float fvalue; | |
e1ccfb19 | 243 | |
e1ccfb19 AJ |
244 | (void)cg; |
245 | ||
ffb580cf AJ |
246 | modbus = sdi->conn; |
247 | devc = sdi->priv; | |
248 | ||
e1ccfb19 AJ |
249 | ret = SR_OK; |
250 | switch (key) { | |
ffb580cf | 251 | case SR_CONF_LIMIT_SAMPLES: |
ffb580cf | 252 | case SR_CONF_LIMIT_MSEC: |
45b75c36 | 253 | ret = sr_sw_limits_config_get(&devc->limits, key, data); |
ffb580cf AJ |
254 | break; |
255 | case SR_CONF_ENABLED: | |
256 | if ((ret = maynuo_m97_get_bit(modbus, ISTATE, &ivalue)) == SR_OK) | |
257 | *data = g_variant_new_boolean(ivalue); | |
258 | break; | |
259 | case SR_CONF_REGULATION: | |
260 | if ((ret = maynuo_m97_get_bit(modbus, UNREG, &ivalue)) != SR_OK) | |
261 | break; | |
262 | if (ivalue) | |
263 | *data = g_variant_new_string("UR"); | |
264 | else if ((ret = maynuo_m97_get_mode(modbus, &mode)) == SR_OK) | |
265 | *data = g_variant_new_string(maynuo_m97_mode_to_str(mode)); | |
266 | break; | |
267 | case SR_CONF_VOLTAGE: | |
268 | if ((ret = maynuo_m97_get_float(modbus, U, &fvalue)) == SR_OK) | |
269 | *data = g_variant_new_double(fvalue); | |
270 | break; | |
271 | case SR_CONF_VOLTAGE_TARGET: | |
272 | if ((ret = maynuo_m97_get_float(modbus, UFIX, &fvalue)) == SR_OK) | |
273 | *data = g_variant_new_double(fvalue); | |
274 | break; | |
275 | case SR_CONF_CURRENT: | |
276 | if ((ret = maynuo_m97_get_float(modbus, I, &fvalue)) == SR_OK) | |
277 | *data = g_variant_new_double(fvalue); | |
278 | break; | |
279 | case SR_CONF_CURRENT_LIMIT: | |
280 | if ((ret = maynuo_m97_get_float(modbus, IFIX, &fvalue)) == SR_OK) | |
281 | *data = g_variant_new_double(fvalue); | |
282 | break; | |
283 | case SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED: | |
284 | *data = g_variant_new_boolean(TRUE); | |
285 | break; | |
286 | case SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE: | |
287 | if ((ret = maynuo_m97_get_bit(modbus, UOVER, &ivalue)) == SR_OK) | |
288 | *data = g_variant_new_boolean(ivalue); | |
289 | break; | |
290 | case SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD: | |
291 | if ((ret = maynuo_m97_get_float(modbus, UMAX, &fvalue)) == SR_OK) | |
292 | *data = g_variant_new_double(fvalue); | |
293 | break; | |
294 | case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED: | |
295 | *data = g_variant_new_boolean(TRUE); | |
296 | break; | |
297 | case SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE: | |
298 | if ((ret = maynuo_m97_get_bit(modbus, IOVER, &ivalue)) == SR_OK) | |
299 | *data = g_variant_new_boolean(ivalue); | |
300 | break; | |
301 | case SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD: | |
302 | if ((ret = maynuo_m97_get_float(modbus, IMAX, &fvalue)) == SR_OK) | |
303 | *data = g_variant_new_double(fvalue); | |
304 | break; | |
305 | case SR_CONF_OVER_TEMPERATURE_PROTECTION: | |
306 | *data = g_variant_new_boolean(TRUE); | |
307 | break; | |
308 | case SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE: | |
309 | if ((ret = maynuo_m97_get_bit(modbus, HEAT, &ivalue)) == SR_OK) | |
310 | *data = g_variant_new_boolean(ivalue); | |
311 | break; | |
e1ccfb19 AJ |
312 | default: |
313 | return SR_ERR_NA; | |
314 | } | |
315 | ||
316 | return ret; | |
317 | } | |
318 | ||
dd7a72ea UH |
319 | static int config_set(uint32_t key, GVariant *data, |
320 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
e1ccfb19 | 321 | { |
ffb580cf AJ |
322 | struct dev_context *devc; |
323 | struct sr_modbus_dev_inst *modbus; | |
e1ccfb19 | 324 | |
e1ccfb19 AJ |
325 | (void)cg; |
326 | ||
ffb580cf AJ |
327 | modbus = sdi->conn; |
328 | devc = sdi->priv; | |
329 | ||
e1ccfb19 | 330 | switch (key) { |
ffb580cf | 331 | case SR_CONF_LIMIT_SAMPLES: |
ffb580cf | 332 | case SR_CONF_LIMIT_MSEC: |
758906aa | 333 | return sr_sw_limits_config_set(&devc->limits, key, data); |
ffb580cf | 334 | case SR_CONF_ENABLED: |
758906aa | 335 | return maynuo_m97_set_input(modbus, g_variant_get_boolean(data)); |
ffb580cf | 336 | case SR_CONF_VOLTAGE_TARGET: |
758906aa | 337 | return maynuo_m97_set_float(modbus, UFIX, g_variant_get_double(data)); |
ffb580cf | 338 | case SR_CONF_CURRENT_LIMIT: |
758906aa | 339 | return maynuo_m97_set_float(modbus, IFIX, g_variant_get_double(data)); |
ffb580cf | 340 | case SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD: |
758906aa | 341 | return maynuo_m97_set_float(modbus, UMAX, g_variant_get_double(data)); |
ffb580cf | 342 | case SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD: |
758906aa | 343 | return maynuo_m97_set_float(modbus, IMAX, g_variant_get_double(data)); |
e1ccfb19 | 344 | default: |
758906aa | 345 | return SR_ERR_NA; |
e1ccfb19 AJ |
346 | } |
347 | ||
758906aa | 348 | return SR_OK; |
e1ccfb19 AJ |
349 | } |
350 | ||
dd7a72ea UH |
351 | static int config_list(uint32_t key, GVariant **data, |
352 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
e1ccfb19 | 353 | { |
ffb580cf | 354 | struct dev_context *devc; |
e1ccfb19 | 355 | |
e66d1892 | 356 | devc = (sdi) ? sdi->priv : NULL; |
e1ccfb19 | 357 | |
ffb580cf | 358 | if (!cg) { |
e66d1892 | 359 | return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts); |
ffb580cf AJ |
360 | } else { |
361 | switch (key) { | |
362 | case SR_CONF_DEVICE_OPTIONS: | |
53012da6 | 363 | *data = std_gvar_array_u32(ARRAY_AND_SIZE(devopts_cg)); |
ffb580cf AJ |
364 | break; |
365 | case SR_CONF_VOLTAGE_TARGET: | |
fe535a89 GS |
366 | if (!devc || !devc->model) |
367 | return SR_ERR_ARG; | |
54d471f4 | 368 | *data = std_gvar_min_max_step(0.0, devc->model->max_voltage, 0.001); |
ffb580cf AJ |
369 | break; |
370 | case SR_CONF_CURRENT_LIMIT: | |
fe535a89 GS |
371 | if (!devc || !devc->model) |
372 | return SR_ERR_ARG; | |
54d471f4 | 373 | *data = std_gvar_min_max_step(0.0, devc->model->max_current, 0.0001); |
ffb580cf AJ |
374 | break; |
375 | default: | |
376 | return SR_ERR_NA; | |
377 | } | |
e1ccfb19 AJ |
378 | } |
379 | ||
a9010323 | 380 | return SR_OK; |
e1ccfb19 AJ |
381 | } |
382 | ||
695dc859 | 383 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) |
e1ccfb19 | 384 | { |
ffb580cf AJ |
385 | struct dev_context *devc; |
386 | struct sr_modbus_dev_inst *modbus; | |
387 | int ret; | |
388 | ||
ffb580cf AJ |
389 | modbus = sdi->conn; |
390 | devc = sdi->priv; | |
e1ccfb19 | 391 | |
ffb580cf AJ |
392 | if ((ret = sr_modbus_source_add(sdi->session, modbus, G_IO_IN, 10, |
393 | maynuo_m97_receive_data, (void *)sdi)) != SR_OK) | |
394 | return ret; | |
395 | ||
45b75c36 | 396 | sr_sw_limits_acquisition_start(&devc->limits); |
bee2b016 | 397 | std_session_send_df_header(sdi); |
ffb580cf | 398 | |
ffb580cf | 399 | return maynuo_m97_capture_start(sdi); |
e1ccfb19 AJ |
400 | } |
401 | ||
695dc859 | 402 | static int dev_acquisition_stop(struct sr_dev_inst *sdi) |
e1ccfb19 | 403 | { |
ffb580cf | 404 | struct sr_modbus_dev_inst *modbus; |
ffb580cf | 405 | |
bee2b016 | 406 | std_session_send_df_end(sdi); |
ffb580cf AJ |
407 | |
408 | modbus = sdi->conn; | |
409 | sr_modbus_source_remove(sdi->session, modbus); | |
e1ccfb19 AJ |
410 | |
411 | return SR_OK; | |
412 | } | |
413 | ||
dd5c48a6 | 414 | static struct sr_dev_driver maynuo_m97_driver_info = { |
e1ccfb19 | 415 | .name = "maynuo-m97", |
ffb580cf | 416 | .longname = "maynuo M97/M98 series", |
e1ccfb19 | 417 | .api_version = 1, |
c2fdcc25 | 418 | .init = std_init, |
700d6b64 | 419 | .cleanup = std_cleanup, |
e1ccfb19 | 420 | .scan = scan, |
c01bf34c | 421 | .dev_list = std_dev_list, |
f778bf02 | 422 | .dev_clear = std_dev_clear, |
e1ccfb19 AJ |
423 | .config_get = config_get, |
424 | .config_set = config_set, | |
425 | .config_list = config_list, | |
426 | .dev_open = dev_open, | |
427 | .dev_close = dev_close, | |
428 | .dev_acquisition_start = dev_acquisition_start, | |
429 | .dev_acquisition_stop = dev_acquisition_stop, | |
41812aca | 430 | .context = NULL, |
e1ccfb19 | 431 | }; |
dd5c48a6 | 432 | SR_REGISTER_DEV_DRIVER(maynuo_m97_driver_info); |