]>
Commit | Line | Data |
---|---|---|
adcb9951 JH |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Bert Vermeulen <bert@biot.com> | |
5 | * Copyright (C) 2012 Joel Holdsworth <joel@airwebreathe.org.uk> | |
6 | * | |
7 | * This program is free software: you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License as published by | |
9 | * the Free Software Foundation, either version 3 of the License, or | |
10 | * (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
19 | */ | |
20 | ||
21 | #include <config.h> | |
adcb9951 | 22 | #include <math.h> |
4bd770f5 | 23 | #include "protocol.h" |
adcb9951 JH |
24 | |
25 | static const struct dslogic_profile supported_device[] = { | |
6c317a8d | 26 | /* DreamSourceLab DSLogic */ |
adcb9951 JH |
27 | { 0x2a0e, 0x0001, "DreamSourceLab", "DSLogic", NULL, |
28 | "dreamsourcelab-dslogic-fx2.fw", | |
44b46d70 | 29 | 0, "DreamSourceLab", "DSLogic", 256 * 1024 * 1024}, |
6c317a8d | 30 | /* DreamSourceLab DSCope */ |
adcb9951 JH |
31 | { 0x2a0e, 0x0002, "DreamSourceLab", "DSCope", NULL, |
32 | "dreamsourcelab-dscope-fx2.fw", | |
44b46d70 | 33 | 0, "DreamSourceLab", "DSCope", 256 * 1024 * 1024}, |
6c317a8d | 34 | /* DreamSourceLab DSLogic Pro */ |
adcb9951 JH |
35 | { 0x2a0e, 0x0003, "DreamSourceLab", "DSLogic Pro", NULL, |
36 | "dreamsourcelab-dslogic-pro-fx2.fw", | |
44b46d70 | 37 | 0, "DreamSourceLab", "DSLogic", 256 * 1024 * 1024}, |
6c317a8d | 38 | /* DreamSourceLab DSLogic Plus */ |
adcb9951 JH |
39 | { 0x2a0e, 0x0020, "DreamSourceLab", "DSLogic Plus", NULL, |
40 | "dreamsourcelab-dslogic-plus-fx2.fw", | |
44b46d70 | 41 | 0, "DreamSourceLab", "DSLogic", 256 * 1024 * 1024}, |
6c317a8d | 42 | /* DreamSourceLab DSLogic Basic */ |
adcb9951 JH |
43 | { 0x2a0e, 0x0021, "DreamSourceLab", "DSLogic Basic", NULL, |
44 | "dreamsourcelab-dslogic-basic-fx2.fw", | |
44b46d70 | 45 | 0, "DreamSourceLab", "DSLogic", 256 * 1024}, |
adcb9951 JH |
46 | |
47 | ALL_ZERO | |
48 | }; | |
49 | ||
adcb9951 JH |
50 | static const uint32_t scanopts[] = { |
51 | SR_CONF_CONN, | |
52 | }; | |
53 | ||
55fb76b3 UH |
54 | static const uint32_t drvopts[] = { |
55 | SR_CONF_LOGIC_ANALYZER, | |
56 | }; | |
57 | ||
adcb9951 JH |
58 | static const uint32_t devopts[] = { |
59 | SR_CONF_CONTINUOUS | SR_CONF_SET | SR_CONF_GET, | |
60 | SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, | |
61 | SR_CONF_VOLTAGE_THRESHOLD | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
62 | SR_CONF_CONN | SR_CONF_GET, | |
63 | SR_CONF_SAMPLERATE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
64 | SR_CONF_TRIGGER_MATCH | SR_CONF_LIST, | |
65 | SR_CONF_CAPTURE_RATIO | SR_CONF_GET | SR_CONF_SET, | |
66 | SR_CONF_EXTERNAL_CLOCK | SR_CONF_GET | SR_CONF_SET, | |
67 | SR_CONF_CLOCK_EDGE | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
68 | }; | |
69 | ||
bc98407b UH |
70 | static const int32_t trigger_matches[] = { |
71 | SR_TRIGGER_ZERO, | |
72 | SR_TRIGGER_ONE, | |
73 | SR_TRIGGER_RISING, | |
74 | SR_TRIGGER_FALLING, | |
75 | SR_TRIGGER_EDGE, | |
76 | }; | |
77 | ||
e124cf9b | 78 | static const char *signal_edges[] = { |
adcb9951 JH |
79 | [DS_EDGE_RISING] = "rising", |
80 | [DS_EDGE_FALLING] = "falling", | |
81 | }; | |
82 | ||
21fe5dba | 83 | static const double thresholds[][2] = { |
1ee70746 JH |
84 | { 0.7, 1.4 }, |
85 | { 1.4, 3.6 }, | |
adcb9951 JH |
86 | }; |
87 | ||
88 | static const uint64_t samplerates[] = { | |
89 | SR_KHZ(10), | |
90 | SR_KHZ(20), | |
91 | SR_KHZ(50), | |
92 | SR_KHZ(100), | |
93 | SR_KHZ(200), | |
94 | SR_KHZ(500), | |
95 | SR_MHZ(1), | |
96 | SR_MHZ(2), | |
97 | SR_MHZ(5), | |
98 | SR_MHZ(10), | |
99 | SR_MHZ(20), | |
100 | SR_MHZ(25), | |
101 | SR_MHZ(50), | |
102 | SR_MHZ(100), | |
103 | SR_MHZ(200), | |
104 | SR_MHZ(400), | |
105 | }; | |
106 | ||
107 | static gboolean is_plausible(const struct libusb_device_descriptor *des) | |
108 | { | |
109 | int i; | |
110 | ||
111 | for (i = 0; supported_device[i].vid; i++) { | |
112 | if (des->idVendor != supported_device[i].vid) | |
113 | continue; | |
114 | if (des->idProduct == supported_device[i].pid) | |
115 | return TRUE; | |
116 | } | |
117 | ||
118 | return FALSE; | |
119 | } | |
120 | ||
121 | static GSList *scan(struct sr_dev_driver *di, GSList *options) | |
122 | { | |
123 | struct drv_context *drvc; | |
124 | struct dev_context *devc; | |
125 | struct sr_dev_inst *sdi; | |
126 | struct sr_usb_dev_inst *usb; | |
127 | struct sr_channel *ch; | |
128 | struct sr_channel_group *cg; | |
129 | struct sr_config *src; | |
130 | const struct dslogic_profile *prof; | |
131 | GSList *l, *devices, *conn_devices; | |
132 | gboolean has_firmware; | |
133 | struct libusb_device_descriptor des; | |
134 | libusb_device **devlist; | |
135 | struct libusb_device_handle *hdl; | |
136 | int ret, i, j; | |
137 | const char *conn; | |
138 | char manufacturer[64], product[64], serial_num[64], connection_id[64]; | |
139 | char channel_name[16]; | |
140 | ||
141 | drvc = di->context; | |
142 | ||
143 | conn = NULL; | |
144 | for (l = options; l; l = l->next) { | |
145 | src = l->data; | |
146 | switch (src->key) { | |
147 | case SR_CONF_CONN: | |
148 | conn = g_variant_get_string(src->data, NULL); | |
149 | break; | |
150 | } | |
151 | } | |
152 | if (conn) | |
153 | conn_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, conn); | |
154 | else | |
155 | conn_devices = NULL; | |
156 | ||
44b46d70 | 157 | /* Find all DSLogic compatible devices and upload firmware to them. */ |
adcb9951 JH |
158 | devices = NULL; |
159 | libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist); | |
160 | for (i = 0; devlist[i]; i++) { | |
161 | if (conn) { | |
162 | usb = NULL; | |
163 | for (l = conn_devices; l; l = l->next) { | |
164 | usb = l->data; | |
165 | if (usb->bus == libusb_get_bus_number(devlist[i]) | |
166 | && usb->address == libusb_get_device_address(devlist[i])) | |
167 | break; | |
168 | } | |
169 | if (!l) | |
170 | /* This device matched none of the ones that | |
171 | * matched the conn specification. */ | |
172 | continue; | |
173 | } | |
174 | ||
44b46d70 | 175 | libusb_get_device_descriptor(devlist[i], &des); |
adcb9951 JH |
176 | |
177 | if (!is_plausible(&des)) | |
178 | continue; | |
179 | ||
180 | if ((ret = libusb_open(devlist[i], &hdl)) < 0) { | |
181 | sr_warn("Failed to open potential device with " | |
182 | "VID:PID %04x:%04x: %s.", des.idVendor, | |
183 | des.idProduct, libusb_error_name(ret)); | |
184 | continue; | |
185 | } | |
186 | ||
187 | if (des.iManufacturer == 0) { | |
188 | manufacturer[0] = '\0'; | |
189 | } else if ((ret = libusb_get_string_descriptor_ascii(hdl, | |
190 | des.iManufacturer, (unsigned char *) manufacturer, | |
191 | sizeof(manufacturer))) < 0) { | |
192 | sr_warn("Failed to get manufacturer string descriptor: %s.", | |
193 | libusb_error_name(ret)); | |
194 | continue; | |
195 | } | |
196 | ||
197 | if (des.iProduct == 0) { | |
198 | product[0] = '\0'; | |
199 | } else if ((ret = libusb_get_string_descriptor_ascii(hdl, | |
200 | des.iProduct, (unsigned char *) product, | |
201 | sizeof(product))) < 0) { | |
202 | sr_warn("Failed to get product string descriptor: %s.", | |
203 | libusb_error_name(ret)); | |
204 | continue; | |
205 | } | |
206 | ||
207 | if (des.iSerialNumber == 0) { | |
208 | serial_num[0] = '\0'; | |
209 | } else if ((ret = libusb_get_string_descriptor_ascii(hdl, | |
210 | des.iSerialNumber, (unsigned char *) serial_num, | |
211 | sizeof(serial_num))) < 0) { | |
212 | sr_warn("Failed to get serial number string descriptor: %s.", | |
213 | libusb_error_name(ret)); | |
214 | continue; | |
215 | } | |
216 | ||
adcb9951 JH |
217 | libusb_close(hdl); |
218 | ||
6c1a76d1 RT |
219 | if (usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)) < 0) |
220 | continue; | |
7bbe5a2b | 221 | |
adcb9951 JH |
222 | prof = NULL; |
223 | for (j = 0; supported_device[j].vid; j++) { | |
224 | if (des.idVendor == supported_device[j].vid && | |
4984ca28 | 225 | des.idProduct == supported_device[j].pid) { |
adcb9951 JH |
226 | prof = &supported_device[j]; |
227 | break; | |
228 | } | |
229 | } | |
230 | ||
adcb9951 JH |
231 | if (!prof) |
232 | continue; | |
233 | ||
234 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); | |
235 | sdi->status = SR_ST_INITIALIZING; | |
236 | sdi->vendor = g_strdup(prof->vendor); | |
237 | sdi->model = g_strdup(prof->model); | |
238 | sdi->version = g_strdup(prof->model_version); | |
239 | sdi->serial_num = g_strdup(serial_num); | |
240 | sdi->connection_id = g_strdup(connection_id); | |
241 | ||
242 | /* Logic channels, all in one channel group. */ | |
243 | cg = g_malloc0(sizeof(struct sr_channel_group)); | |
244 | cg->name = g_strdup("Logic"); | |
b3fd0993 | 245 | for (j = 0; j < NUM_CHANNELS; j++) { |
84f6d40a | 246 | sprintf(channel_name, "%d", j); |
adcb9951 JH |
247 | ch = sr_channel_new(sdi, j, SR_CHANNEL_LOGIC, |
248 | TRUE, channel_name); | |
249 | cg->channels = g_slist_append(cg->channels, ch); | |
250 | } | |
251 | sdi->channel_groups = g_slist_append(NULL, cg); | |
252 | ||
253 | devc = dslogic_dev_new(); | |
254 | devc->profile = prof; | |
255 | sdi->priv = devc; | |
256 | devices = g_slist_append(devices, sdi); | |
257 | ||
258 | devc->samplerates = samplerates; | |
259 | devc->num_samplerates = ARRAY_SIZE(samplerates); | |
3c749da1 | 260 | has_firmware = usb_match_manuf_prod(devlist[i], "DreamSourceLab", "USB-based Instrument"); |
adcb9951 JH |
261 | |
262 | if (has_firmware) { | |
263 | /* Already has the firmware, so fix the new address. */ | |
44b46d70 | 264 | sr_dbg("Found a DSLogic device."); |
adcb9951 JH |
265 | sdi->status = SR_ST_INACTIVE; |
266 | sdi->inst_type = SR_INST_USB; | |
267 | sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]), | |
268 | libusb_get_device_address(devlist[i]), NULL); | |
269 | } else { | |
270 | if (ezusb_upload_firmware(drvc->sr_ctx, devlist[i], | |
1372bdcd | 271 | USB_CONFIGURATION, prof->firmware) == SR_OK) { |
adcb9951 JH |
272 | /* Store when this device's FW was updated. */ |
273 | devc->fw_updated = g_get_monotonic_time(); | |
1372bdcd | 274 | } else { |
adcb9951 | 275 | sr_err("Firmware upload failed for " |
1372bdcd | 276 | "device %d.%d (logical), name %s.", |
adcb9951 | 277 | libusb_get_bus_number(devlist[i]), |
1372bdcd GS |
278 | libusb_get_device_address(devlist[i]), |
279 | prof->firmware); | |
280 | } | |
adcb9951 JH |
281 | sdi->inst_type = SR_INST_USB; |
282 | sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]), | |
283 | 0xff, NULL); | |
284 | } | |
285 | } | |
286 | libusb_free_device_list(devlist, 1); | |
287 | g_slist_free_full(conn_devices, (GDestroyNotify)sr_usb_dev_inst_free); | |
288 | ||
289 | return std_scan_complete(di, devices); | |
290 | } | |
291 | ||
adcb9951 JH |
292 | static int dev_open(struct sr_dev_inst *sdi) |
293 | { | |
294 | struct sr_dev_driver *di = sdi->driver; | |
295 | struct sr_usb_dev_inst *usb; | |
296 | struct dev_context *devc; | |
adcb9951 JH |
297 | int ret; |
298 | int64_t timediff_us, timediff_ms; | |
299 | ||
300 | devc = sdi->priv; | |
301 | usb = sdi->conn; | |
302 | ||
303 | /* | |
304 | * If the firmware was recently uploaded, wait up to MAX_RENUM_DELAY_MS | |
305 | * milliseconds for the FX2 to renumerate. | |
306 | */ | |
307 | ret = SR_ERR; | |
308 | if (devc->fw_updated > 0) { | |
309 | sr_info("Waiting for device to reset."); | |
310 | /* Takes >= 300ms for the FX2 to be gone from the USB bus. */ | |
311 | g_usleep(300 * 1000); | |
312 | timediff_ms = 0; | |
313 | while (timediff_ms < MAX_RENUM_DELAY_MS) { | |
314 | if ((ret = dslogic_dev_open(sdi, di)) == SR_OK) | |
315 | break; | |
316 | g_usleep(100 * 1000); | |
317 | ||
318 | timediff_us = g_get_monotonic_time() - devc->fw_updated; | |
319 | timediff_ms = timediff_us / 1000; | |
320 | sr_spew("Waited %" PRIi64 "ms.", timediff_ms); | |
321 | } | |
322 | if (ret != SR_OK) { | |
323 | sr_err("Device failed to renumerate."); | |
324 | return SR_ERR; | |
325 | } | |
326 | sr_info("Device came back after %" PRIi64 "ms.", timediff_ms); | |
327 | } else { | |
328 | sr_info("Firmware upload was not needed."); | |
329 | ret = dslogic_dev_open(sdi, di); | |
330 | } | |
331 | ||
332 | if (ret != SR_OK) { | |
333 | sr_err("Unable to open device."); | |
334 | return SR_ERR; | |
335 | } | |
336 | ||
337 | ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE); | |
338 | if (ret != 0) { | |
339 | switch (ret) { | |
340 | case LIBUSB_ERROR_BUSY: | |
341 | sr_err("Unable to claim USB interface. Another " | |
342 | "program or driver has already claimed it."); | |
343 | break; | |
344 | case LIBUSB_ERROR_NO_DEVICE: | |
345 | sr_err("Device has been disconnected."); | |
346 | break; | |
347 | default: | |
348 | sr_err("Unable to claim interface: %s.", | |
349 | libusb_error_name(ret)); | |
350 | break; | |
351 | } | |
352 | ||
353 | return SR_ERR; | |
354 | } | |
355 | ||
adcb9951 | 356 | |
3566348b | 357 | if ((ret = dslogic_fpga_firmware_upload(sdi)) != SR_OK) |
adcb9951 JH |
358 | return ret; |
359 | ||
360 | if (devc->cur_samplerate == 0) { | |
361 | /* Samplerate hasn't been set; default to the slowest one. */ | |
362 | devc->cur_samplerate = devc->samplerates[0]; | |
363 | } | |
364 | ||
55bcd7ad | 365 | if (devc->cur_threshold == 0.0) { |
86a15711 | 366 | devc->cur_threshold = thresholds[1][0]; |
55bcd7ad UH |
367 | return dslogic_set_voltage_threshold(sdi, devc->cur_threshold); |
368 | } | |
1ee70746 | 369 | |
adcb9951 JH |
370 | return SR_OK; |
371 | } | |
372 | ||
373 | static int dev_close(struct sr_dev_inst *sdi) | |
374 | { | |
375 | struct sr_usb_dev_inst *usb; | |
376 | ||
377 | usb = sdi->conn; | |
378 | ||
379 | if (!usb->devhdl) | |
f1ba6b4b | 380 | return SR_ERR_BUG; |
adcb9951 | 381 | |
44b46d70 | 382 | sr_info("Closing device on %d.%d (logical) / %s (physical) interface %d.", |
adcb9951 JH |
383 | usb->bus, usb->address, sdi->connection_id, USB_INTERFACE); |
384 | libusb_release_interface(usb->devhdl, USB_INTERFACE); | |
385 | libusb_close(usb->devhdl); | |
386 | usb->devhdl = NULL; | |
adcb9951 JH |
387 | |
388 | return SR_OK; | |
389 | } | |
390 | ||
391 | static int config_get(uint32_t key, GVariant **data, | |
392 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
393 | { | |
394 | struct dev_context *devc; | |
395 | struct sr_usb_dev_inst *usb; | |
697fb6dd | 396 | int idx; |
adcb9951 JH |
397 | |
398 | (void)cg; | |
399 | ||
400 | if (!sdi) | |
401 | return SR_ERR_ARG; | |
402 | ||
403 | devc = sdi->priv; | |
404 | ||
405 | switch (key) { | |
406 | case SR_CONF_CONN: | |
407 | if (!sdi->conn) | |
408 | return SR_ERR_ARG; | |
409 | usb = sdi->conn; | |
410 | if (usb->address == 255) | |
411 | /* Device still needs to re-enumerate after firmware | |
412 | * upload, so we don't know its (future) address. */ | |
413 | return SR_ERR; | |
95c1fe62 | 414 | *data = g_variant_new_printf("%d.%d", usb->bus, usb->address); |
adcb9951 JH |
415 | break; |
416 | case SR_CONF_VOLTAGE_THRESHOLD: | |
1ee70746 | 417 | if (!strcmp(devc->profile->model, "DSLogic")) { |
697fb6dd | 418 | if ((idx = std_double_tuple_idx_d0(devc->cur_threshold, |
21fe5dba | 419 | ARRAY_AND_SIZE(thresholds))) < 0) |
697fb6dd | 420 | return SR_ERR_BUG; |
21fe5dba UH |
421 | *data = std_gvar_tuple_double(thresholds[idx][0], |
422 | thresholds[idx][1]); | |
1ee70746 | 423 | } else { |
43995cda | 424 | *data = std_gvar_tuple_double(devc->cur_threshold, devc->cur_threshold); |
adcb9951 JH |
425 | } |
426 | break; | |
427 | case SR_CONF_LIMIT_SAMPLES: | |
428 | *data = g_variant_new_uint64(devc->limit_samples); | |
429 | break; | |
430 | case SR_CONF_SAMPLERATE: | |
431 | *data = g_variant_new_uint64(devc->cur_samplerate); | |
432 | break; | |
433 | case SR_CONF_CAPTURE_RATIO: | |
434 | *data = g_variant_new_uint64(devc->capture_ratio); | |
435 | break; | |
436 | case SR_CONF_EXTERNAL_CLOCK: | |
437 | *data = g_variant_new_boolean(devc->external_clock); | |
438 | break; | |
439 | case SR_CONF_CONTINUOUS: | |
440 | *data = g_variant_new_boolean(devc->continuous_mode); | |
441 | break; | |
442 | case SR_CONF_CLOCK_EDGE: | |
697fb6dd | 443 | idx = devc->clock_edge; |
e124cf9b | 444 | if (idx >= (int)ARRAY_SIZE(signal_edges)) |
adcb9951 | 445 | return SR_ERR_BUG; |
e124cf9b | 446 | *data = g_variant_new_string(signal_edges[0]); |
adcb9951 JH |
447 | break; |
448 | default: | |
449 | return SR_ERR_NA; | |
450 | } | |
451 | ||
452 | return SR_OK; | |
453 | } | |
454 | ||
adcb9951 JH |
455 | static int config_set(uint32_t key, GVariant *data, |
456 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
457 | { | |
458 | struct dev_context *devc; | |
758906aa | 459 | int idx; |
adcb9951 JH |
460 | gdouble low, high; |
461 | ||
462 | (void)cg; | |
463 | ||
464 | if (!sdi) | |
465 | return SR_ERR_ARG; | |
466 | ||
adcb9951 JH |
467 | devc = sdi->priv; |
468 | ||
adcb9951 JH |
469 | switch (key) { |
470 | case SR_CONF_SAMPLERATE: | |
697fb6dd UH |
471 | if ((idx = std_u64_idx(data, devc->samplerates, devc->num_samplerates)) < 0) |
472 | return SR_ERR_ARG; | |
473 | devc->cur_samplerate = devc->samplerates[idx]; | |
adcb9951 JH |
474 | break; |
475 | case SR_CONF_LIMIT_SAMPLES: | |
476 | devc->limit_samples = g_variant_get_uint64(data); | |
477 | break; | |
478 | case SR_CONF_CAPTURE_RATIO: | |
479 | devc->capture_ratio = g_variant_get_uint64(data); | |
efad7ccc | 480 | break; |
adcb9951 | 481 | case SR_CONF_VOLTAGE_THRESHOLD: |
1ee70746 | 482 | if (!strcmp(devc->profile->model, "DSLogic")) { |
21fe5dba | 483 | if ((idx = std_double_tuple_idx(data, ARRAY_AND_SIZE(thresholds))) < 0) |
697fb6dd | 484 | return SR_ERR_ARG; |
21fe5dba | 485 | devc->cur_threshold = thresholds[idx][0]; |
758906aa | 486 | return dslogic_fpga_firmware_upload(sdi); |
1ee70746 | 487 | } else { |
697fb6dd | 488 | g_variant_get(data, "(dd)", &low, &high); |
758906aa | 489 | return dslogic_set_voltage_threshold(sdi, (low + high) / 2.0); |
adcb9951 | 490 | } |
adcb9951 JH |
491 | break; |
492 | case SR_CONF_EXTERNAL_CLOCK: | |
493 | devc->external_clock = g_variant_get_boolean(data); | |
494 | break; | |
495 | case SR_CONF_CONTINUOUS: | |
496 | devc->continuous_mode = g_variant_get_boolean(data); | |
497 | break; | |
498 | case SR_CONF_CLOCK_EDGE: | |
e124cf9b | 499 | if ((idx = std_str_idx(data, ARRAY_AND_SIZE(signal_edges))) < 0) |
adcb9951 | 500 | return SR_ERR_ARG; |
697fb6dd | 501 | devc->clock_edge = idx; |
adcb9951 JH |
502 | break; |
503 | default: | |
758906aa | 504 | return SR_ERR_NA; |
adcb9951 JH |
505 | } |
506 | ||
758906aa | 507 | return SR_OK; |
adcb9951 JH |
508 | } |
509 | ||
510 | static int config_list(uint32_t key, GVariant **data, | |
511 | const struct sr_dev_inst *sdi, const struct sr_channel_group *cg) | |
512 | { | |
e66d1892 | 513 | struct dev_context *devc; |
adcb9951 | 514 | |
e66d1892 | 515 | devc = (sdi) ? sdi->priv : NULL; |
adcb9951 JH |
516 | |
517 | switch (key) { | |
518 | case SR_CONF_SCAN_OPTIONS: | |
adcb9951 | 519 | case SR_CONF_DEVICE_OPTIONS: |
e66d1892 | 520 | return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts); |
adcb9951 | 521 | case SR_CONF_VOLTAGE_THRESHOLD: |
8e2fd23a GS |
522 | if (!devc || !devc->profile) |
523 | return SR_ERR_ARG; | |
9fb9afb5 | 524 | if (!strcmp(devc->profile->model, "DSLogic")) |
21fe5dba | 525 | *data = std_gvar_thresholds(ARRAY_AND_SIZE(thresholds)); |
9fb9afb5 | 526 | else |
7bc3cfe6 | 527 | *data = std_gvar_min_max_step_thresholds(0.0, 5.0, 0.1); |
adcb9951 JH |
528 | break; |
529 | case SR_CONF_SAMPLERATE: | |
8e2fd23a GS |
530 | if (!devc) |
531 | return SR_ERR_ARG; | |
463160cb | 532 | *data = std_gvar_samplerates(devc->samplerates, devc->num_samplerates); |
adcb9951 | 533 | break; |
bc98407b UH |
534 | case SR_CONF_TRIGGER_MATCH: |
535 | *data = std_gvar_array_i32(ARRAY_AND_SIZE(trigger_matches)); | |
536 | break; | |
adcb9951 | 537 | case SR_CONF_CLOCK_EDGE: |
e124cf9b | 538 | *data = g_variant_new_strv(ARRAY_AND_SIZE(signal_edges)); |
adcb9951 JH |
539 | break; |
540 | default: | |
541 | return SR_ERR_NA; | |
542 | } | |
543 | ||
544 | return SR_OK; | |
545 | } | |
546 | ||
44b46d70 UH |
547 | static struct sr_dev_driver dreamsourcelab_dslogic_driver_info = { |
548 | .name = "dreamsourcelab-dslogic", | |
549 | .longname = "DreamSourceLab DSLogic", | |
adcb9951 JH |
550 | .api_version = 1, |
551 | .init = std_init, | |
552 | .cleanup = std_cleanup, | |
553 | .scan = scan, | |
554 | .dev_list = std_dev_list, | |
8bf18daa | 555 | .dev_clear = std_dev_clear, |
adcb9951 JH |
556 | .config_get = config_get, |
557 | .config_set = config_set, | |
558 | .config_list = config_list, | |
559 | .dev_open = dev_open, | |
560 | .dev_close = dev_close, | |
4bd770f5 JH |
561 | .dev_acquisition_start = dslogic_acquisition_start, |
562 | .dev_acquisition_stop = dslogic_acquisition_stop, | |
adcb9951 JH |
563 | .context = NULL, |
564 | }; | |
44b46d70 | 565 | SR_REGISTER_DEV_DRIVER(dreamsourcelab_dslogic_driver_info); |