]>
Commit | Line | Data |
---|---|---|
fa0d6afe BV |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2014 Bert Vermeulen <bert@biot.com> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
6ec6c43b | 20 | #include <config.h> |
33c40990 | 21 | #include <string.h> |
fa0d6afe BV |
22 | #include "protocol.h" |
23 | ||
33c40990 BV |
24 | /* |
25 | * The default serial communication settings on the device are 9600 | |
26 | * baud, 9 data bits. The 9th bit isn't actually used, and the vendor | |
27 | * software uses Mark parity to absorb the extra bit. | |
28 | * | |
29 | * Since 9 data bits is not a standard available in POSIX, we use two | |
30 | * stop bits to skip over the extra bit instead. | |
31 | */ | |
32 | #define SERIALCOMM "9600/8n2" | |
33 | ||
584560f1 | 34 | static const uint32_t scanopts[] = { |
33c40990 BV |
35 | SR_CONF_CONN, |
36 | SR_CONF_SERIALCOMM, | |
37 | }; | |
38 | ||
1f889afd | 39 | static const uint32_t drvopts[] = { |
33c40990 | 40 | SR_CONF_POWER_SUPPLY, |
d6fa8ace BV |
41 | }; |
42 | ||
1f889afd | 43 | static const uint32_t devopts[] = { |
e91bb0a6 | 44 | SR_CONF_CONTINUOUS, |
7a0b98b5 | 45 | SR_CONF_CHANNEL_CONFIG | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, |
5827f61b | 46 | SR_CONF_OVER_CURRENT_PROTECTION_ENABLED | SR_CONF_GET | SR_CONF_SET, |
33c40990 BV |
47 | }; |
48 | ||
584560f1 | 49 | static const uint32_t devopts_cg[] = { |
7a0b98b5 AJ |
50 | SR_CONF_VOLTAGE | SR_CONF_GET, |
51 | SR_CONF_VOLTAGE_TARGET | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
52 | SR_CONF_CURRENT | SR_CONF_GET, | |
53 | SR_CONF_CURRENT_LIMIT | SR_CONF_GET | SR_CONF_SET | SR_CONF_LIST, | |
54 | SR_CONF_ENABLED | SR_CONF_GET | SR_CONF_SET, | |
33c40990 BV |
55 | }; |
56 | ||
57 | static const char *channel_modes[] = { | |
58 | "Independent", | |
59 | "Series", | |
60 | "Parallel", | |
61 | }; | |
62 | ||
329733d9 | 63 | static const struct pps_model models[] = { |
33c40990 BV |
64 | { PPS_3203T_3S, "PPS3203T-3S", |
65 | CHANMODE_INDEPENDENT | CHANMODE_SERIES | CHANMODE_PARALLEL, | |
66 | 3, | |
67 | { | |
68 | /* Channel 1 */ | |
69 | { { 0, 32, 0.01 }, { 0, 3, 0.001 } }, | |
70 | /* Channel 2 */ | |
71 | { { 0, 32, 0.01 }, { 0, 3, 0.001 } }, | |
72 | /* Channel 3 */ | |
73 | { { 0, 6, 0.01 }, { 0, 3, 0.001 } }, | |
74 | }, | |
75 | }, | |
76 | }; | |
77 | ||
4f840ce9 | 78 | static GSList *scan(struct sr_dev_driver *di, GSList *options, int modelid) |
fa0d6afe | 79 | { |
33c40990 | 80 | struct sr_dev_inst *sdi; |
fa0d6afe | 81 | struct drv_context *drvc; |
33c40990 BV |
82 | struct dev_context *devc; |
83 | struct sr_config *src; | |
ba7dd8bb | 84 | struct sr_channel *ch; |
40fd0264 | 85 | struct sr_channel_group *cg; |
33c40990 BV |
86 | struct sr_serial_dev_inst *serial; |
87 | GSList *l, *devices; | |
329733d9 | 88 | const struct pps_model *model; |
33c40990 BV |
89 | uint8_t packet[PACKET_SIZE]; |
90 | unsigned int i; | |
2eb1612d | 91 | int delay_ms, ret; |
33c40990 BV |
92 | const char *conn, *serialcomm; |
93 | char channel[10]; | |
fa0d6afe BV |
94 | |
95 | devices = NULL; | |
41812aca | 96 | drvc = di->context; |
fa0d6afe | 97 | |
33c40990 BV |
98 | conn = serialcomm = NULL; |
99 | for (l = options; l; l = l->next) { | |
100 | src = l->data; | |
101 | switch (src->key) { | |
102 | case SR_CONF_CONN: | |
103 | conn = g_variant_get_string(src->data, NULL); | |
104 | break; | |
105 | case SR_CONF_SERIALCOMM: | |
106 | serialcomm = g_variant_get_string(src->data, NULL); | |
107 | break; | |
108 | } | |
109 | } | |
110 | if (!conn) | |
111 | return NULL; | |
112 | if (!serialcomm) | |
113 | serialcomm = SERIALCOMM; | |
114 | ||
91219afc | 115 | serial = sr_serial_dev_inst_new(conn, serialcomm); |
33c40990 | 116 | |
5305266a | 117 | if (serial_open(serial, SERIAL_RDWR) != SR_OK) |
33c40990 | 118 | return NULL; |
91219afc | 119 | |
33c40990 BV |
120 | serial_flush(serial); |
121 | ||
945cfd4f | 122 | /* This is how the vendor software scans for hardware. */ |
33c40990 BV |
123 | memset(packet, 0, PACKET_SIZE); |
124 | packet[0] = 0xaa; | |
125 | packet[1] = 0xaa; | |
2eb1612d BV |
126 | delay_ms = serial_timeout(serial, PACKET_SIZE); |
127 | if (serial_write_blocking(serial, packet, PACKET_SIZE, delay_ms) < PACKET_SIZE) { | |
081c214e | 128 | sr_err("Unable to write while probing for hardware."); |
33c40990 BV |
129 | return NULL; |
130 | } | |
131 | /* The device responds with a 24-byte packet when it receives a packet. | |
132 | * At 9600 baud, 300ms is long enough for it to have arrived. */ | |
133 | g_usleep(300 * 1000); | |
134 | memset(packet, 0, PACKET_SIZE); | |
135 | if ((ret = serial_read_nonblocking(serial, packet, PACKET_SIZE)) < 0) { | |
136 | sr_err("Unable to read while probing for hardware: %s", | |
8d522801 | 137 | sr_strerror(ret)); |
33c40990 BV |
138 | return NULL; |
139 | } | |
140 | if (ret != PACKET_SIZE || packet[0] != 0xaa || packet[1] != 0xaa) { | |
141 | /* Doesn't look like an Atten PPS. */ | |
142 | return NULL; | |
143 | } | |
144 | ||
145 | model = NULL; | |
146 | for (i = 0; i < ARRAY_SIZE(models); i++) { | |
147 | if (models[i].modelid == modelid) { | |
148 | model = &models[i]; | |
149 | break; | |
150 | } | |
151 | } | |
152 | if (!model) { | |
153 | sr_err("Unknown modelid %d", modelid); | |
154 | return NULL; | |
155 | } | |
156 | ||
aac29cc1 | 157 | sdi = g_malloc0(sizeof(struct sr_dev_inst)); |
0af636be UH |
158 | sdi->status = SR_ST_INACTIVE; |
159 | sdi->vendor = g_strdup("Atten"); | |
160 | sdi->model = g_strdup(model->name); | |
33c40990 BV |
161 | sdi->inst_type = SR_INST_SERIAL; |
162 | sdi->conn = serial; | |
163 | for (i = 0; i < MAX_CHANNELS; i++) { | |
164 | snprintf(channel, 10, "CH%d", i + 1); | |
5e23fcab | 165 | ch = sr_channel_new(sdi, i, SR_CHANNEL_ANALOG, TRUE, channel); |
40fd0264 UH |
166 | cg = g_malloc(sizeof(struct sr_channel_group)); |
167 | cg->name = g_strdup(channel); | |
ba7dd8bb | 168 | cg->channels = g_slist_append(NULL, ch); |
40fd0264 UH |
169 | cg->priv = NULL; |
170 | sdi->channel_groups = g_slist_append(sdi->channel_groups, cg); | |
33c40990 BV |
171 | } |
172 | ||
173 | devc = g_malloc0(sizeof(struct dev_context)); | |
174 | devc->model = model; | |
175 | devc->config = g_malloc0(sizeof(struct per_channel_config) * model->num_channels); | |
2eb1612d | 176 | devc->delay_ms = delay_ms; |
33c40990 | 177 | sdi->priv = devc; |
33c40990 BV |
178 | devices = g_slist_append(devices, sdi); |
179 | ||
180 | serial_close(serial); | |
181 | if (!devices) | |
182 | sr_serial_dev_inst_free(serial); | |
fa0d6afe | 183 | |
15a5bfe4 | 184 | return std_scan_complete(di, devices); |
fa0d6afe BV |
185 | } |
186 | ||
4f840ce9 | 187 | static GSList *scan_3203(struct sr_dev_driver *di, GSList *options) |
33c40990 | 188 | { |
4f840ce9 | 189 | return scan(di, options, PPS_3203T_3S); |
33c40990 BV |
190 | } |
191 | ||
584560f1 | 192 | static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, |
53b4680f | 193 | const struct sr_channel_group *cg) |
fa0d6afe | 194 | { |
33c40990 | 195 | struct dev_context *devc; |
ba7dd8bb | 196 | struct sr_channel *ch; |
33c40990 BV |
197 | int channel, ret; |
198 | ||
199 | if (!sdi) | |
200 | return SR_ERR_ARG; | |
fa0d6afe | 201 | |
33c40990 | 202 | devc = sdi->priv; |
fa0d6afe BV |
203 | |
204 | ret = SR_OK; | |
53b4680f | 205 | if (!cg) { |
660e398f | 206 | /* No channel group: global options. */ |
33c40990 | 207 | switch (key) { |
7a0b98b5 | 208 | case SR_CONF_CHANNEL_CONFIG: |
fe997353 | 209 | *data = g_variant_new_string(channel_modes[devc->channel_mode]); |
33c40990 | 210 | break; |
a1eaa9e0 | 211 | case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED: |
33c40990 BV |
212 | *data = g_variant_new_boolean(devc->over_current_protection); |
213 | break; | |
214 | default: | |
215 | return SR_ERR_NA; | |
216 | } | |
217 | } else { | |
660e398f | 218 | /* We only ever have one channel per channel group in this driver. */ |
ba7dd8bb UH |
219 | ch = cg->channels->data; |
220 | channel = ch->index; | |
33c40990 BV |
221 | |
222 | switch (key) { | |
7a0b98b5 | 223 | case SR_CONF_VOLTAGE: |
33c40990 BV |
224 | *data = g_variant_new_double(devc->config[channel].output_voltage_last); |
225 | break; | |
7a0b98b5 | 226 | case SR_CONF_VOLTAGE_TARGET: |
33c40990 BV |
227 | *data = g_variant_new_double(devc->config[channel].output_voltage_max); |
228 | break; | |
7a0b98b5 | 229 | case SR_CONF_CURRENT: |
33c40990 BV |
230 | *data = g_variant_new_double(devc->config[channel].output_current_last); |
231 | break; | |
7a0b98b5 | 232 | case SR_CONF_CURRENT_LIMIT: |
33c40990 BV |
233 | *data = g_variant_new_double(devc->config[channel].output_current_max); |
234 | break; | |
7a0b98b5 | 235 | case SR_CONF_ENABLED: |
33c40990 BV |
236 | *data = g_variant_new_boolean(devc->config[channel].output_enabled); |
237 | break; | |
238 | default: | |
239 | return SR_ERR_NA; | |
240 | } | |
fa0d6afe BV |
241 | } |
242 | ||
243 | return ret; | |
244 | } | |
245 | ||
33c40990 BV |
246 | static int find_str(const char *str, const char **strings, int array_size) |
247 | { | |
248 | int idx, i; | |
249 | ||
250 | idx = -1; | |
251 | for (i = 0; i < array_size; i++) { | |
252 | if (!strcmp(str, strings[i])) { | |
253 | idx = i; | |
254 | break; | |
255 | } | |
256 | } | |
257 | ||
258 | return idx; | |
259 | } | |
260 | ||
584560f1 | 261 | static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi, |
53b4680f | 262 | const struct sr_channel_group *cg) |
fa0d6afe | 263 | { |
33c40990 | 264 | struct dev_context *devc; |
ba7dd8bb | 265 | struct sr_channel *ch; |
33c40990 BV |
266 | gdouble dval; |
267 | int channel, ret, ival; | |
268 | const char *sval; | |
269 | gboolean bval; | |
fa0d6afe BV |
270 | |
271 | if (sdi->status != SR_ST_ACTIVE) | |
272 | return SR_ERR_DEV_CLOSED; | |
273 | ||
274 | ret = SR_OK; | |
33c40990 | 275 | devc = sdi->priv; |
53b4680f | 276 | if (!cg) { |
660e398f | 277 | /* No channel group: global options. */ |
33c40990 | 278 | switch (key) { |
7a0b98b5 | 279 | case SR_CONF_CHANNEL_CONFIG: |
33c40990 BV |
280 | sval = g_variant_get_string(data, NULL); |
281 | if ((ival = find_str(sval, channel_modes, | |
282 | ARRAY_SIZE(channel_modes))) == -1) { | |
283 | ret = SR_ERR_ARG; | |
284 | break; | |
285 | } | |
286 | if (devc->model->channel_modes && (1 << ival) == 0) { | |
287 | /* Not supported on this model. */ | |
288 | ret = SR_ERR_ARG; | |
289 | } | |
290 | if (ival == devc->channel_mode_set) | |
291 | /* Nothing to do. */ | |
292 | break; | |
293 | devc->channel_mode_set = ival; | |
ab988ecb | 294 | devc->config_dirty = TRUE; |
33c40990 | 295 | break; |
a1eaa9e0 | 296 | case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED: |
33c40990 BV |
297 | bval = g_variant_get_boolean(data); |
298 | if (bval == devc->over_current_protection_set) | |
299 | /* Nothing to do. */ | |
300 | break; | |
301 | devc->over_current_protection_set = bval; | |
ab988ecb | 302 | devc->config_dirty = TRUE; |
33c40990 BV |
303 | break; |
304 | default: | |
305 | return SR_ERR_NA; | |
306 | } | |
307 | } else { | |
660e398f UH |
308 | /* Channel group specified: per-channel options. */ |
309 | /* We only ever have one channel per channel group in this driver. */ | |
ba7dd8bb UH |
310 | ch = cg->channels->data; |
311 | channel = ch->index; | |
33c40990 BV |
312 | |
313 | switch (key) { | |
7a0b98b5 | 314 | case SR_CONF_VOLTAGE_TARGET: |
33c40990 BV |
315 | dval = g_variant_get_double(data); |
316 | if (dval < 0 || dval > devc->model->channels[channel].voltage[1]) | |
317 | ret = SR_ERR_ARG; | |
318 | devc->config[channel].output_voltage_max = dval; | |
ab988ecb | 319 | devc->config_dirty = TRUE; |
33c40990 | 320 | break; |
7a0b98b5 | 321 | case SR_CONF_CURRENT_LIMIT: |
33c40990 BV |
322 | dval = g_variant_get_double(data); |
323 | if (dval < 0 || dval > devc->model->channels[channel].current[1]) | |
324 | ret = SR_ERR_ARG; | |
325 | devc->config[channel].output_current_max = dval; | |
ab988ecb | 326 | devc->config_dirty = TRUE; |
33c40990 | 327 | break; |
7a0b98b5 | 328 | case SR_CONF_ENABLED: |
33c40990 BV |
329 | bval = g_variant_get_boolean(data); |
330 | if (bval == devc->config[channel].output_enabled_set) | |
331 | /* Nothing to do. */ | |
332 | break; | |
333 | devc->config[channel].output_enabled_set = bval; | |
ab988ecb | 334 | devc->config_dirty = TRUE; |
33c40990 BV |
335 | break; |
336 | default: | |
337 | ret = SR_ERR_NA; | |
338 | } | |
fa0d6afe BV |
339 | } |
340 | ||
341 | return ret; | |
342 | } | |
343 | ||
584560f1 | 344 | static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi, |
53b4680f | 345 | const struct sr_channel_group *cg) |
fa0d6afe | 346 | { |
33c40990 | 347 | struct dev_context *devc; |
ba7dd8bb | 348 | struct sr_channel *ch; |
33c40990 BV |
349 | GVariant *gvar; |
350 | GVariantBuilder gvb; | |
351 | int channel, ret, i; | |
352 | ||
d6fa8ace | 353 | /* Always available. */ |
33c40990 | 354 | if (key == SR_CONF_SCAN_OPTIONS) { |
584560f1 BV |
355 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, |
356 | scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t)); | |
33c40990 BV |
357 | return SR_OK; |
358 | } | |
359 | ||
d6fa8ace BV |
360 | if (key == SR_CONF_DEVICE_OPTIONS && !sdi) { |
361 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, | |
1f889afd | 362 | drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t)); |
d6fa8ace BV |
363 | return SR_OK; |
364 | } | |
365 | ||
e22aa878 BV |
366 | if (!sdi) |
367 | return SR_ERR_ARG; | |
fa0d6afe | 368 | |
d6fa8ace | 369 | devc = sdi->priv; |
fa0d6afe | 370 | ret = SR_OK; |
53b4680f | 371 | if (!cg) { |
660e398f | 372 | /* No channel group: global options. */ |
33c40990 BV |
373 | switch (key) { |
374 | case SR_CONF_DEVICE_OPTIONS: | |
584560f1 | 375 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, |
1f889afd | 376 | devopts, ARRAY_SIZE(devopts), sizeof(uint32_t)); |
33c40990 | 377 | break; |
7a0b98b5 | 378 | case SR_CONF_CHANNEL_CONFIG: |
33c40990 BV |
379 | if (devc->model->channel_modes == CHANMODE_INDEPENDENT) { |
380 | /* The 1-channel models. */ | |
381 | *data = g_variant_new_strv(channel_modes, 1); | |
382 | } else { | |
383 | /* The other models support all modes. */ | |
384 | *data = g_variant_new_strv(channel_modes, ARRAY_SIZE(channel_modes)); | |
385 | } | |
386 | break; | |
387 | default: | |
388 | return SR_ERR_NA; | |
389 | } | |
390 | } else { | |
660e398f | 391 | /* Channel group specified: per-channel options. */ |
33c40990 BV |
392 | if (!sdi) |
393 | return SR_ERR_ARG; | |
660e398f | 394 | /* We only ever have one channel per channel group in this driver. */ |
ba7dd8bb UH |
395 | ch = cg->channels->data; |
396 | channel = ch->index; | |
33c40990 BV |
397 | |
398 | switch (key) { | |
399 | case SR_CONF_DEVICE_OPTIONS: | |
584560f1 BV |
400 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, |
401 | devopts_cg, ARRAY_SIZE(devopts_cg), sizeof(uint32_t)); | |
33c40990 | 402 | break; |
7a0b98b5 | 403 | case SR_CONF_VOLTAGE_TARGET: |
33c40990 BV |
404 | g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); |
405 | /* Min, max, step. */ | |
406 | for (i = 0; i < 3; i++) { | |
407 | gvar = g_variant_new_double(devc->model->channels[channel].voltage[i]); | |
408 | g_variant_builder_add_value(&gvb, gvar); | |
409 | } | |
410 | *data = g_variant_builder_end(&gvb); | |
411 | break; | |
7a0b98b5 | 412 | case SR_CONF_CURRENT_LIMIT: |
33c40990 BV |
413 | g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); |
414 | /* Min, max, step. */ | |
415 | for (i = 0; i < 3; i++) { | |
416 | gvar = g_variant_new_double(devc->model->channels[channel].current[i]); | |
417 | g_variant_builder_add_value(&gvb, gvar); | |
418 | } | |
419 | *data = g_variant_builder_end(&gvb); | |
420 | break; | |
421 | default: | |
422 | return SR_ERR_NA; | |
423 | } | |
fa0d6afe BV |
424 | } |
425 | ||
426 | return ret; | |
427 | } | |
428 | ||
ab988ecb BV |
429 | static int dev_close(struct sr_dev_inst *sdi) |
430 | { | |
431 | struct dev_context *devc; | |
432 | ||
433 | devc = sdi->priv; | |
434 | if (devc->config_dirty) | |
435 | /* Some configuration changes were queued up but didn't | |
436 | * get sent to the device, likely because we were never | |
437 | * in acquisition mode. Send them out now. */ | |
438 | send_config(sdi); | |
439 | ||
440 | return std_serial_dev_close(sdi); | |
441 | } | |
442 | ||
695dc859 | 443 | static int dev_acquisition_start(const struct sr_dev_inst *sdi) |
fa0d6afe | 444 | { |
33c40990 BV |
445 | struct dev_context *devc; |
446 | struct sr_serial_dev_inst *serial; | |
447 | uint8_t packet[PACKET_SIZE]; | |
448 | ||
fa0d6afe BV |
449 | if (sdi->status != SR_ST_ACTIVE) |
450 | return SR_ERR_DEV_CLOSED; | |
451 | ||
33c40990 BV |
452 | devc = sdi->priv; |
453 | memset(devc->packet, 0x44, PACKET_SIZE); | |
454 | devc->packet_size = 0; | |
455 | ||
456 | devc->acquisition_running = TRUE; | |
457 | ||
458 | serial = sdi->conn; | |
102f1239 BV |
459 | serial_source_add(sdi->session, serial, G_IO_IN, 50, |
460 | atten_pps3xxx_receive_data, (void *)sdi); | |
695dc859 | 461 | std_session_send_df_header(sdi, LOG_PREFIX); |
33c40990 | 462 | |
ba7dd8bb | 463 | /* Send a "channel" configuration packet now. */ |
33c40990 BV |
464 | memset(packet, 0, PACKET_SIZE); |
465 | packet[0] = 0xaa; | |
466 | packet[1] = 0xaa; | |
467 | send_packet(sdi, packet); | |
fa0d6afe BV |
468 | |
469 | return SR_OK; | |
470 | } | |
471 | ||
695dc859 | 472 | static int dev_acquisition_stop(struct sr_dev_inst *sdi) |
fa0d6afe | 473 | { |
33c40990 BV |
474 | struct dev_context *devc; |
475 | ||
fa0d6afe BV |
476 | if (sdi->status != SR_ST_ACTIVE) |
477 | return SR_ERR_DEV_CLOSED; | |
478 | ||
33c40990 BV |
479 | devc = sdi->priv; |
480 | devc->acquisition_running = FALSE; | |
fa0d6afe BV |
481 | |
482 | return SR_OK; | |
483 | } | |
484 | ||
dd5c48a6 | 485 | static struct sr_dev_driver atten_pps3203_driver_info = { |
33c40990 BV |
486 | .name = "atten-pps3203", |
487 | .longname = "Atten PPS3203T-3S", | |
fa0d6afe | 488 | .api_version = 1, |
c2fdcc25 | 489 | .init = std_init, |
700d6b64 | 490 | .cleanup = std_cleanup, |
33c40990 | 491 | .scan = scan_3203, |
c01bf34c | 492 | .dev_list = std_dev_list, |
a6630742 | 493 | .dev_clear = NULL, |
fa0d6afe BV |
494 | .config_get = config_get, |
495 | .config_set = config_set, | |
496 | .config_list = config_list, | |
33c40990 | 497 | .dev_open = std_serial_dev_open, |
ab988ecb | 498 | .dev_close = dev_close, |
fa0d6afe BV |
499 | .dev_acquisition_start = dev_acquisition_start, |
500 | .dev_acquisition_stop = dev_acquisition_stop, | |
41812aca | 501 | .context = NULL, |
fa0d6afe | 502 | }; |
dd5c48a6 | 503 | SR_REGISTER_DEV_DRIVER(atten_pps3203_driver_info); |