]>
Commit | Line | Data |
---|---|---|
74510d4b ML |
1 | /* |
2 | * This file is part of the libserialport project. | |
3 | * | |
f77bb46d ML |
4 | * Copyright (C) 2013, 2015 Martin Ling <martin-libserialport@earth.li> |
5 | * Copyright (C) 2014 Uwe Hermann <uwe@hermann-uwe.de> | |
6 | * Copyright (C) 2014 Aurelien Jacobs <aurel@gnuage.org> | |
74510d4b ML |
7 | * |
8 | * This program is free software: you can redistribute it and/or modify | |
9 | * it under the terms of the GNU Lesser General Public License as | |
10 | * published by the Free Software Foundation, either version 3 of the | |
11 | * License, or (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU Lesser General Public License | |
19 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
20 | */ | |
21 | ||
cd5f5281 | 22 | /** |
cf9d365c UH |
23 | * @mainpage libserialport API |
24 | * | |
25 | * Introduction | |
26 | * ============ | |
27 | * | |
28 | * libserialport is a minimal library written in C that is intended to take | |
29 | * care of the OS-specific details when writing software that uses serial ports. | |
30 | * | |
31 | * By writing your serial code to use libserialport, you enable it to work | |
32 | * transparently on any platform supported by the library. | |
33 | * | |
deef6e52 | 34 | * libserialport is an open source project released under the LGPL3+ license. |
cf9d365c | 35 | * |
deef6e52 ML |
36 | * The library is maintained by the [sigrok](http://sigrok.org/) project. See |
37 | * the [libserialport homepage](http://sigrok.org/wiki/Libserialport) for the | |
38 | * latest information. | |
cf9d365c | 39 | * |
deef6e52 ML |
40 | * Source code is maintained in git at |
41 | * [git://sigrok.org/libserialport](http://sigrok.org/gitweb/?p=libserialport.git). | |
42 | * | |
43 | * Bugs are tracked at http://sigrok.org/bugzilla/. | |
44 | * | |
45 | * The library was conceived and designed by Martin Ling, is maintained by | |
46 | * Uwe Hermann, and has received contributions from several other developers. | |
47 | * See the git history for full credits. | |
48 | * | |
49 | * API information | |
50 | * =============== | |
51 | * | |
52 | * The API has been designed from scratch. It does not exactly resemble the | |
53 | * serial API of any particular operating system. Instead it aims to provide | |
54 | * a set of functions that can reliably be implemented across all operating | |
55 | * systems. These form a sufficient basis for higher level behaviour to | |
56 | * be implemented in a platform independent manner. | |
57 | * | |
58 | * If you are porting code written for a particular OS, you may find you need | |
59 | * to restructure things somewhat, or do without some specialised features. | |
60 | * For particular notes on porting existing code, see @ref Porting. | |
61 | * | |
7c8d67ef ML |
62 | * Examples |
63 | * -------- | |
64 | * | |
65 | * Some simple example programs using libserialport are included in the | |
66 | * @c examples directory in the source package: | |
67 | * | |
68 | * - @ref list_ports.c - Getting a list of ports present on the system. | |
69 | * - @ref port_info.c - Getting information on a particular serial port. | |
70 | * | |
71 | * These examples are linked with the API documentation. Each function | |
72 | * in the API reference includes links to where it is used in an example | |
73 | * program, and each appearance of a function in the examples links | |
74 | * to that function's entry in the API reference. | |
49fd7b1b ML |
75 | * |
76 | * Headers | |
77 | * ------- | |
78 | * | |
79 | * To use libserialport functions in your code, you should include the | |
80 | * libserialport.h header, i.e. "#include <libserialport.h>". | |
81 | * | |
82 | * Namespace | |
83 | * --------- | |
84 | * | |
85 | * All identifiers defined by the public libserialport headers use the prefix | |
86 | * sp_ (for functions and data types) or SP_ (for macros and constants). | |
87 | * | |
88 | * Functions | |
89 | * --------- | |
90 | * | |
91 | * The functions provided by the library are documented in detail in | |
92 | * the following sections: | |
93 | * | |
94 | * - @ref Enumeration (obtaining a list of serial ports on the system) | |
95 | * - @ref Ports (opening, closing and getting information about ports) | |
96 | * - @ref Configuration (baud rate, parity, etc.) | |
97 | * - @ref Signals (modem control lines, breaks, etc.) | |
98 | * - @ref Data (reading and writing data, and buffer management) | |
99 | * - @ref Waiting (waiting for ports to be ready, integrating with event loops) | |
100 | * - @ref Errors (getting error and debugging information) | |
deef6e52 ML |
101 | * |
102 | * Data structures | |
103 | * --------------- | |
104 | * | |
105 | * The library defines three data structures: | |
cf9d365c | 106 | * |
deef6e52 ML |
107 | * - @ref sp_port, which represents a serial port. |
108 | * See @ref Enumeration. | |
109 | * - @ref sp_port_config, which represents a port configuration. | |
110 | * See @ref Configuration. | |
111 | * - @ref sp_event_set, which represents a set of events. | |
112 | * See @ref Waiting. | |
cf9d365c | 113 | * |
deef6e52 ML |
114 | * All these structures are allocated and freed by library functions. It is |
115 | * the caller's responsibility to ensure that the correct calls are made to | |
116 | * free allocated structures after use. | |
cf9d365c | 117 | * |
deef6e52 ML |
118 | * Return codes and error handling |
119 | * ------------------------------- | |
cf9d365c | 120 | * |
0151b157 ML |
121 | * Most functions have return type @ref sp_return and can return only four |
122 | * possible error values: | |
cf9d365c | 123 | * |
6aabf62a ML |
124 | * - @ref SP_ERR_ARG means that a function was called with invalid |
125 | * arguments. This implies a bug in the caller. The arguments passed would | |
126 | * be invalid regardless of the underlying OS or serial device involved. | |
127 | * | |
128 | * - @ref SP_ERR_FAIL means that the OS reported a failure. The error code or | |
129 | * message provided by the OS can be obtained by calling sp_last_error_code() | |
130 | * or sp_last_error_message(). | |
131 | * | |
132 | * - @ref SP_ERR_SUPP indicates that there is no support for the requested | |
133 | * operation in the current OS, driver or device. No error message is | |
134 | * available from the OS in this case. There is either no way to request | |
135 | * the operation in the first place, or libserialport does not know how to | |
136 | * do so in the current version. | |
137 | * | |
138 | * - @ref SP_ERR_MEM indicates that a memory allocation failed. | |
139 | * | |
140 | * All of these error values are negative. | |
cf9d365c | 141 | * |
0151b157 ML |
142 | * Calls that succeed return @ref SP_OK, which is equal to zero. Some functions |
143 | * declared @ref sp_return can also return a positive value for a successful | |
0a1ab8bf | 144 | * numeric result, e.g. sp_blocking_read() or sp_blocking_write(). |
deef6e52 ML |
145 | * |
146 | * An error message is only available via sp_last_error_message() in the case | |
147 | * where SP_ERR_FAIL was returned by the previous function call. The error | |
148 | * message returned is that provided by the OS, using the current language | |
149 | * settings. It is an error to call sp_last_error_code() or | |
150 | * sp_last_error_message() except after a previous function call returned | |
151 | * SP_ERR_FAIL. The library does not define its own error codes or messages | |
152 | * to accompany other return codes. | |
153 | * | |
154 | * Thread safety | |
155 | * ------------- | |
156 | * | |
157 | * Certain combinations of calls can be made concurrently, as follows. | |
158 | * | |
159 | * - Calls using different ports may always be made concurrently, i.e. | |
160 | * it is safe for separate threads to handle their own ports. | |
161 | * | |
162 | * - Calls using the same port may be made concurrently when one call | |
163 | * is a read operation and one call is a write operation, i.e. it is safe | |
164 | * to use separate "reader" and "writer" threads for the same port. See | |
165 | * below for which operations meet these definitions. | |
166 | * | |
167 | * Read operations: | |
168 | * | |
169 | * - sp_blocking_read() | |
170 | * - sp_blocking_read_next() | |
171 | * - sp_nonblocking_read() | |
172 | * - sp_input_waiting() | |
173 | * - sp_flush() with @ref SP_BUF_INPUT only. | |
174 | * - sp_wait() with @ref SP_EVENT_RX_READY only. | |
175 | * | |
176 | * Write operations: | |
177 | * | |
178 | * - sp_blocking_write() | |
179 | * - sp_nonblocking_write() | |
180 | * - sp_output_waiting() | |
181 | * - sp_drain() | |
182 | * - sp_flush() with @ref SP_BUF_OUTPUT only. | |
183 | * - sp_wait() with @ref SP_EVENT_TX_READY only. | |
184 | * | |
185 | * If two calls, on the same port, do not fit into one of these categories | |
186 | * each, then they may not be made concurrently. | |
187 | * | |
188 | * Debugging | |
189 | * --------- | |
190 | * | |
191 | * The library can output extensive tracing and debugging information. The | |
192 | * simplest way to use this is to set the environment variable | |
193 | * LIBSERIALPORT_DEBUG to any value; messages will then be output to the | |
194 | * standard error stream. | |
195 | * | |
196 | * This behaviour is implemented by a default debug message handling | |
197 | * callback. An alternative callback can be set using sp_set_debug_handler(), | |
198 | * in order to e.g. redirect the output elsewhere or filter it. | |
199 | * | |
200 | * No guarantees are made about the content of the debug output; it is chosen | |
201 | * to suit the needs of the developers and may change between releases. | |
202 | * | |
203 | * @anchor Porting | |
204 | * Porting | |
205 | * ------- | |
206 | * | |
207 | * The following guidelines may help when porting existing OS-specific code | |
208 | * to use libserialport. | |
209 | * | |
210 | * ### Porting from Unix-like systems ### | |
211 | * | |
212 | * There are two main differences to note when porting code written for Unix. | |
213 | * | |
214 | * The first is that Unix traditionally provides a wide range of functionality | |
215 | * for dealing with serial devices at the OS level; this is exposed through the | |
216 | * termios API and dates to the days when serial terminals were common. If your | |
217 | * code relies on many of these facilities you will need to adapt it, because | |
56fe6e32 | 218 | * libserialport provides only a raw binary channel with no special handling. |
deef6e52 ML |
219 | * |
220 | * The second relates to blocking versus non-blocking I/O behaviour. In | |
221 | * Unix-like systems this is normally specified by setting the O_NONBLOCK | |
222 | * flag on the file descriptor, affecting the semantics of subsequent read() | |
223 | * and write() calls. | |
224 | * | |
225 | * In libserialport, blocking and nonblocking operations are both available at | |
226 | * any time. If your existing code Ñ•ets O_NONBLOCK, you should use | |
227 | * sp_nonblocking_read() and sp_nonblocking_write() to get the same behaviour | |
228 | * as your existing read() and write() calls. If it does not, you should use | |
229 | * sp_blocking_read() and sp_blocking_write() instead. You may also find | |
230 | * sp_blocking_read_next() useful, which reproduces the semantics of a blocking | |
231 | * read() with VTIME = 0 and VMIN = 1 set in termios. | |
232 | * | |
233 | * Finally, you should take care if your program uses custom signal handlers. | |
234 | * The blocking calls provided by libserialport will restart system calls that | |
235 | * return with EINTR, so you will need to make your own arrangements if you | |
236 | * need to interrupt blocking operations when your signal handlers are called. | |
237 | * This is not an issue if you only use the default handlers. | |
238 | * | |
239 | * ### Porting from Windows ### | |
240 | * | |
241 | * The main consideration when porting from Windows is that there is no | |
242 | * direct equivalent for overlapped I/O operations. | |
243 | * | |
244 | * If your program does not use overlapped I/O, you can simply use | |
245 | * sp_blocking_read() and sp_blocking_write() as direct equivalents for | |
246 | * ReadFile() and WriteFile(). You may also find sp_blocking_read_next() | |
247 | * useful, which reproduces the special semantics of ReadFile() with | |
248 | * ReadIntervalTimeout and ReadTotalTimeoutMultiplier set to MAXDWORD | |
249 | * and 0 < ReadTotalTimeoutConstant < MAXDWORD. | |
250 | * | |
251 | * If your program makes use of overlapped I/O to continue work while a serial | |
252 | * operation is in progress, then you can achieve the same results using | |
253 | * sp_nonblocking_read() and sp_nonblocking_write(). | |
254 | * | |
255 | * Generally, overlapped I/O is combined with either waiting for completion | |
256 | * once there is no more background work to do (using WaitForSingleObject() or | |
257 | * WaitForMultipleObjects()), or periodically checking for completion with | |
258 | * GetOverlappedResult(). If the aim is to start a new operation for further | |
259 | * data once the previous one has completed, you can instead simply call the | |
260 | * nonblocking functions again with the next data. If you need to wait for | |
261 | * completion, use sp_wait() to determine when the port is ready to send or | |
262 | * receive further data. | |
cf9d365c | 263 | */ |
cd5f5281 | 264 | |
8645feda UH |
265 | #ifndef LIBSERIALPORT_LIBSERIALPORT_H |
266 | #define LIBSERIALPORT_LIBSERIALPORT_H | |
e8ffaee9 | 267 | |
5ef8a1ed UH |
268 | #ifdef __cplusplus |
269 | extern "C" { | |
270 | #endif | |
271 | ||
74510d4b | 272 | #include <stddef.h> |
74510d4b | 273 | |
cd5f5281 | 274 | /** Return values. */ |
eb6ed20f | 275 | enum sp_return { |
cd5f5281 | 276 | /** Operation completed successfully. */ |
74510d4b | 277 | SP_OK = 0, |
cd5f5281 | 278 | /** Invalid arguments were passed to the function. */ |
e9a2f9c9 | 279 | SP_ERR_ARG = -1, |
cfa5af67 | 280 | /** A system error occurred while executing the operation. */ |
e9a2f9c9 | 281 | SP_ERR_FAIL = -2, |
cd5f5281 | 282 | /** A memory allocation failed while executing the operation. */ |
f92f1f0c | 283 | SP_ERR_MEM = -3, |
6aabf62a | 284 | /** The requested operation is not supported by this system or device. */ |
79a80046 | 285 | SP_ERR_SUPP = -4 |
74510d4b ML |
286 | }; |
287 | ||
cd5f5281 | 288 | /** Port access modes. */ |
eb6ed20f | 289 | enum sp_mode { |
a036341b ML |
290 | /** Open port for read access. */ |
291 | SP_MODE_READ = 1, | |
292 | /** Open port for write access. */ | |
276ef1b9 | 293 | SP_MODE_WRITE = 2, |
13efecf8 | 294 | /** Open port for read and write access. @since 0.1.1 */ |
276ef1b9 | 295 | SP_MODE_READ_WRITE = 3 |
74510d4b ML |
296 | }; |
297 | ||
6f1186aa ML |
298 | /** Port events. */ |
299 | enum sp_event { | |
144a598f | 300 | /** Data received and ready to read. */ |
6f1186aa | 301 | SP_EVENT_RX_READY = 1, |
144a598f | 302 | /** Ready to transmit new data. */ |
6f1186aa | 303 | SP_EVENT_TX_READY = 2, |
144a598f | 304 | /** Error occurred. */ |
79a80046 | 305 | SP_EVENT_ERROR = 4 |
6f1186aa ML |
306 | }; |
307 | ||
fd8fd11a ML |
308 | /** Buffer selection. */ |
309 | enum sp_buffer { | |
310 | /** Input buffer. */ | |
311 | SP_BUF_INPUT = 1, | |
312 | /** Output buffer. */ | |
313 | SP_BUF_OUTPUT = 2, | |
314 | /** Both buffers. */ | |
79a80046 | 315 | SP_BUF_BOTH = 3 |
fd8fd11a ML |
316 | }; |
317 | ||
cd5f5281 | 318 | /** Parity settings. */ |
eb6ed20f | 319 | enum sp_parity { |
c200f5c1 | 320 | /** Special value to indicate setting should be left alone. */ |
eb6ed20f | 321 | SP_PARITY_INVALID = -1, |
cd5f5281 | 322 | /** No parity. */ |
74510d4b | 323 | SP_PARITY_NONE = 0, |
cd5f5281 | 324 | /** Odd parity. */ |
20e63a77 ML |
325 | SP_PARITY_ODD = 1, |
326 | /** Even parity. */ | |
327 | SP_PARITY_EVEN = 2, | |
e432ce60 ML |
328 | /** Mark parity. */ |
329 | SP_PARITY_MARK = 3, | |
330 | /** Space parity. */ | |
79a80046 | 331 | SP_PARITY_SPACE = 4 |
74510d4b ML |
332 | }; |
333 | ||
cd5f5281 | 334 | /** RTS pin behaviour. */ |
eb6ed20f | 335 | enum sp_rts { |
c200f5c1 | 336 | /** Special value to indicate setting should be left alone. */ |
eb6ed20f | 337 | SP_RTS_INVALID = -1, |
cd5f5281 | 338 | /** RTS off. */ |
d514a26f | 339 | SP_RTS_OFF = 0, |
cd5f5281 | 340 | /** RTS on. */ |
d514a26f | 341 | SP_RTS_ON = 1, |
cd5f5281 | 342 | /** RTS used for flow control. */ |
79a80046 | 343 | SP_RTS_FLOW_CONTROL = 2 |
d514a26f ML |
344 | }; |
345 | ||
cd5f5281 | 346 | /** CTS pin behaviour. */ |
eb6ed20f | 347 | enum sp_cts { |
c200f5c1 | 348 | /** Special value to indicate setting should be left alone. */ |
eb6ed20f | 349 | SP_CTS_INVALID = -1, |
cd5f5281 | 350 | /** CTS ignored. */ |
d514a26f | 351 | SP_CTS_IGNORE = 0, |
cd5f5281 | 352 | /** CTS used for flow control. */ |
79a80046 | 353 | SP_CTS_FLOW_CONTROL = 1 |
d514a26f ML |
354 | }; |
355 | ||
cd5f5281 | 356 | /** DTR pin behaviour. */ |
eb6ed20f | 357 | enum sp_dtr { |
c200f5c1 | 358 | /** Special value to indicate setting should be left alone. */ |
eb6ed20f | 359 | SP_DTR_INVALID = -1, |
cd5f5281 | 360 | /** DTR off. */ |
d514a26f | 361 | SP_DTR_OFF = 0, |
cd5f5281 | 362 | /** DTR on. */ |
d514a26f | 363 | SP_DTR_ON = 1, |
cd5f5281 | 364 | /** DTR used for flow control. */ |
79a80046 | 365 | SP_DTR_FLOW_CONTROL = 2 |
d514a26f ML |
366 | }; |
367 | ||
cd5f5281 | 368 | /** DSR pin behaviour. */ |
eb6ed20f | 369 | enum sp_dsr { |
c200f5c1 | 370 | /** Special value to indicate setting should be left alone. */ |
eb6ed20f | 371 | SP_DSR_INVALID = -1, |
cd5f5281 | 372 | /** DSR ignored. */ |
d514a26f | 373 | SP_DSR_IGNORE = 0, |
cd5f5281 | 374 | /** DSR used for flow control. */ |
79a80046 | 375 | SP_DSR_FLOW_CONTROL = 1 |
d514a26f ML |
376 | }; |
377 | ||
cd5f5281 | 378 | /** XON/XOFF flow control behaviour. */ |
eb6ed20f | 379 | enum sp_xonxoff { |
c200f5c1 | 380 | /** Special value to indicate setting should be left alone. */ |
eb6ed20f | 381 | SP_XONXOFF_INVALID = -1, |
cd5f5281 | 382 | /** XON/XOFF disabled. */ |
d514a26f | 383 | SP_XONXOFF_DISABLED = 0, |
cd5f5281 | 384 | /** XON/XOFF enabled for input only. */ |
d514a26f | 385 | SP_XONXOFF_IN = 1, |
cd5f5281 | 386 | /** XON/XOFF enabled for output only. */ |
d514a26f | 387 | SP_XONXOFF_OUT = 2, |
cd5f5281 | 388 | /** XON/XOFF enabled for input and output. */ |
79a80046 | 389 | SP_XONXOFF_INOUT = 3 |
ac74fdaf ML |
390 | }; |
391 | ||
cd5f5281 | 392 | /** Standard flow control combinations. */ |
eb6ed20f | 393 | enum sp_flowcontrol { |
cd5f5281 | 394 | /** No flow control. */ |
18fc2dd1 | 395 | SP_FLOWCONTROL_NONE = 0, |
cd5f5281 | 396 | /** Software flow control using XON/XOFF characters. */ |
18fc2dd1 | 397 | SP_FLOWCONTROL_XONXOFF = 1, |
cd5f5281 | 398 | /** Hardware flow control using RTS/CTS signals. */ |
18fc2dd1 | 399 | SP_FLOWCONTROL_RTSCTS = 2, |
cd5f5281 | 400 | /** Hardware flow control using DTR/DSR signals. */ |
79a80046 | 401 | SP_FLOWCONTROL_DTRDSR = 3 |
18fc2dd1 ML |
402 | }; |
403 | ||
8cf7c697 ML |
404 | /** Input signals. */ |
405 | enum sp_signal { | |
406 | /** Clear to send. */ | |
407 | SP_SIG_CTS = 1, | |
408 | /** Data set ready. */ | |
409 | SP_SIG_DSR = 2, | |
410 | /** Data carrier detect. */ | |
411 | SP_SIG_DCD = 4, | |
412 | /** Ring indicator. */ | |
79a80046 | 413 | SP_SIG_RI = 8 |
8cf7c697 ML |
414 | }; |
415 | ||
13efecf8 UH |
416 | /** |
417 | * Transport types. | |
418 | * | |
419 | * @since 0.1.1 | |
420 | */ | |
a93fb468 | 421 | enum sp_transport { |
13efecf8 | 422 | /** Native platform serial port. @since 0.1.1 */ |
a93fb468 | 423 | SP_TRANSPORT_NATIVE, |
13efecf8 | 424 | /** USB serial port adapter. @since 0.1.1 */ |
a93fb468 | 425 | SP_TRANSPORT_USB, |
13efecf8 | 426 | /** Bluetooth serial port adapter. @since 0.1.1 */ |
79a80046 | 427 | SP_TRANSPORT_BLUETOOTH |
a93fb468 AJ |
428 | }; |
429 | ||
0a1ab8bf UH |
430 | /** |
431 | * @struct sp_port | |
432 | * An opaque structure representing a serial port. | |
433 | */ | |
1c5aae9d | 434 | struct sp_port; |
eb6ed20f | 435 | |
0a1ab8bf UH |
436 | /** |
437 | * @struct sp_port_config | |
438 | * An opaque structure representing the configuration for a serial port. | |
439 | */ | |
9b1502ef | 440 | struct sp_port_config; |
eb6ed20f | 441 | |
6f1186aa ML |
442 | /** |
443 | * @struct sp_event_set | |
444 | * A set of handles to wait on for events. | |
445 | */ | |
446 | struct sp_event_set { | |
447 | /** Array of OS-specific handles. */ | |
448 | void *handles; | |
449 | /** Array of bitmasks indicating which events apply for each handle. */ | |
450 | enum sp_event *masks; | |
451 | /** Number of handles. */ | |
452 | unsigned int count; | |
453 | }; | |
454 | ||
091e75fe | 455 | /** |
144a598f UH |
456 | * @defgroup Enumeration Port enumeration |
457 | * | |
458 | * Enumerating the serial ports of a system. | |
459 | * | |
7c8d67ef ML |
460 | * See @ref list_ports.c for a working example of port enumeration. |
461 | * | |
144a598f UH |
462 | * @{ |
463 | */ | |
091e75fe | 464 | |
cd5f5281 | 465 | /** |
cf9d365c UH |
466 | * Obtain a pointer to a new sp_port structure representing the named port. |
467 | * | |
468 | * The user should allocate a variable of type "struct sp_port *" and pass a | |
469 | * pointer to this to receive the result. | |
470 | * | |
471 | * The result should be freed after use by calling sp_free_port(). | |
472 | * | |
35578b06 UH |
473 | * @param[in] portname The OS-specific name of a serial port. Must not be NULL. |
474 | * @param[out] port_ptr If any error is returned, the variable pointed to by | |
475 | * port_ptr will be set to NULL. Otherwise, it will be set | |
476 | * to point to the newly allocated port. Must not be NULL. | |
f36c6395 ML |
477 | * |
478 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
479 | * |
480 | * @since 0.1.0 | |
cf9d365c | 481 | */ |
eb6ed20f | 482 | enum sp_return sp_get_port_by_name(const char *portname, struct sp_port **port_ptr); |
cd5f5281 ML |
483 | |
484 | /** | |
cf9d365c | 485 | * Free a port structure obtained from sp_get_port_by_name() or sp_copy_port(). |
1652aa86 | 486 | * |
35578b06 UH |
487 | * @param[in] port Pointer to a port structure. Must not be NULL. |
488 | * | |
1652aa86 | 489 | * @since 0.1.0 |
cf9d365c | 490 | */ |
e3b2f7a4 | 491 | void sp_free_port(struct sp_port *port); |
cd5f5281 ML |
492 | |
493 | /** | |
cf9d365c UH |
494 | * List the serial ports available on the system. |
495 | * | |
496 | * The result obtained is an array of pointers to sp_port structures, | |
497 | * terminated by a NULL. The user should allocate a variable of type | |
498 | * "struct sp_port **" and pass a pointer to this to receive the result. | |
499 | * | |
500 | * The result should be freed after use by calling sp_free_port_list(). | |
501 | * If a port from the list is to be used after freeing the list, it must be | |
502 | * copied first using sp_copy_port(). | |
503 | * | |
35578b06 UH |
504 | * @param[out] list_ptr If any error is returned, the variable pointed to by |
505 | * list_ptr will be set to NULL. Otherwise, it will be set | |
506 | * to point to the newly allocated array. Must not be NULL. | |
f36c6395 ML |
507 | * |
508 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
509 | * |
510 | * @since 0.1.0 | |
cf9d365c | 511 | */ |
eb6ed20f | 512 | enum sp_return sp_list_ports(struct sp_port ***list_ptr); |
cd5f5281 ML |
513 | |
514 | /** | |
35578b06 | 515 | * Make a new copy of an sp_port structure. |
cf9d365c UH |
516 | * |
517 | * The user should allocate a variable of type "struct sp_port *" and pass a | |
518 | * pointer to this to receive the result. | |
519 | * | |
520 | * The copy should be freed after use by calling sp_free_port(). | |
521 | * | |
35578b06 UH |
522 | * @param[in] port Pointer to a port structure. Must not be NULL. |
523 | * @param[out] copy_ptr If any error is returned, the variable pointed to by | |
524 | * copy_ptr will be set to NULL. Otherwise, it will be set | |
525 | * to point to the newly allocated copy. Must not be NULL. | |
f36c6395 ML |
526 | * |
527 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
528 | * |
529 | * @since 0.1.0 | |
cf9d365c | 530 | */ |
eb6ed20f | 531 | enum sp_return sp_copy_port(const struct sp_port *port, struct sp_port **copy_ptr); |
cd5f5281 ML |
532 | |
533 | /** | |
cf9d365c UH |
534 | * Free a port list obtained from sp_list_ports(). |
535 | * | |
536 | * This will also free all the sp_port structures referred to from the list; | |
537 | * any that are to be retained must be copied first using sp_copy_port(). | |
1652aa86 | 538 | * |
35578b06 UH |
539 | * @param[in] ports Pointer to a list of port structures. Must not be NULL. |
540 | * | |
1652aa86 | 541 | * @since 0.1.0 |
cf9d365c | 542 | */ |
d54e9004 | 543 | void sp_free_port_list(struct sp_port **ports); |
e96d8bd2 | 544 | |
091e75fe | 545 | /** |
cf9d365c | 546 | * @} |
144a598f UH |
547 | * @defgroup Ports Port handling |
548 | * | |
549 | * Opening, closing and querying ports. | |
550 | * | |
7c8d67ef ML |
551 | * See @ref port_info.c for a working example of getting port information. |
552 | * | |
cf9d365c UH |
553 | * @{ |
554 | */ | |
091e75fe | 555 | |
cd5f5281 | 556 | /** |
cf9d365c UH |
557 | * Open the specified serial port. |
558 | * | |
35578b06 UH |
559 | * @param[in] port Pointer to a port structure. Must not be NULL. |
560 | * @param[in] flags Flags to use when opening the serial port. | |
cf9d365c | 561 | * |
f36c6395 | 562 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
563 | * |
564 | * @since 0.1.0 | |
cf9d365c | 565 | */ |
eb6ed20f | 566 | enum sp_return sp_open(struct sp_port *port, enum sp_mode flags); |
cd5f5281 ML |
567 | |
568 | /** | |
cf9d365c UH |
569 | * Close the specified serial port. |
570 | * | |
35578b06 UH |
571 | * @param[in] port Pointer to a port structure. Must not be NULL. |
572 | * | |
f36c6395 | 573 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
574 | * |
575 | * @since 0.1.0 | |
cf9d365c | 576 | */ |
eb6ed20f | 577 | enum sp_return sp_close(struct sp_port *port); |
e96d8bd2 | 578 | |
0151b157 ML |
579 | /** |
580 | * Get the name of a port. | |
581 | * | |
582 | * The name returned is whatever is normally used to refer to a port on the | |
583 | * current operating system; e.g. for Windows it will usually be a "COMn" | |
584 | * device name, and for Unix it will be a device path beginning with "/dev/". | |
585 | * | |
35578b06 | 586 | * @param[in] port Pointer to a port structure. Must not be NULL. |
0151b157 ML |
587 | * |
588 | * @return The port name, or NULL if an invalid port is passed. The name | |
35578b06 UH |
589 | * string is part of the port structure and may not be used after |
590 | * the port structure has been freed. | |
1652aa86 UH |
591 | * |
592 | * @since 0.1.0 | |
0151b157 ML |
593 | */ |
594 | char *sp_get_port_name(const struct sp_port *port); | |
595 | ||
a93fb468 AJ |
596 | /** |
597 | * Get a description for a port, to present to end user. | |
598 | * | |
35578b06 | 599 | * @param[in] port Pointer to a port structure. Must not be NULL. |
a93fb468 AJ |
600 | * |
601 | * @return The port description, or NULL if an invalid port is passed. | |
35578b06 UH |
602 | * The description string is part of the port structure and may not |
603 | * be used after the port structure has been freed. | |
a93fb468 | 604 | * |
3f2f48fc | 605 | * @since 0.1.1 |
a93fb468 | 606 | */ |
f1480939 | 607 | char *sp_get_port_description(const struct sp_port *port); |
a93fb468 AJ |
608 | |
609 | /** | |
610 | * Get the transport type used by a port. | |
611 | * | |
35578b06 | 612 | * @param[in] port Pointer to a port structure. Must not be NULL. |
a93fb468 AJ |
613 | * |
614 | * @return The port transport type. | |
615 | * | |
3f2f48fc | 616 | * @since 0.1.1 |
a93fb468 | 617 | */ |
ad036cc8 | 618 | enum sp_transport sp_get_port_transport(const struct sp_port *port); |
a93fb468 AJ |
619 | |
620 | /** | |
621 | * Get the USB bus number and address on bus of a USB serial adapter port. | |
622 | * | |
35578b06 | 623 | * @param[in] port Pointer to a port structure. Must not be NULL. |
ff6da776 UH |
624 | * @param[out] usb_bus Pointer to a variable to store the USB bus. |
625 | * Can be NULL (in that case it will be ignored). | |
626 | * @param[out] usb_address Pointer to a variable to store the USB address. | |
627 | * Can be NULL (in that case it will be ignored). | |
a93fb468 AJ |
628 | * |
629 | * @return SP_OK upon success, a negative error code otherwise. | |
630 | * | |
3f2f48fc | 631 | * @since 0.1.1 |
a93fb468 AJ |
632 | */ |
633 | enum sp_return sp_get_port_usb_bus_address(const struct sp_port *port, | |
634 | int *usb_bus, int *usb_address); | |
635 | ||
636 | /** | |
637 | * Get the USB Vendor ID and Product ID of a USB serial adapter port. | |
638 | * | |
35578b06 | 639 | * @param[in] port Pointer to a port structure. Must not be NULL. |
9eb9f071 UH |
640 | * @param[out] usb_vid Pointer to a variable to store the USB VID. |
641 | * Can be NULL (in that case it will be ignored). | |
642 | * @param[out] usb_pid Pointer to a variable to store the USB PID. | |
643 | * Can be NULL (in that case it will be ignored). | |
a93fb468 AJ |
644 | * |
645 | * @return SP_OK upon success, a negative error code otherwise. | |
646 | * | |
3f2f48fc | 647 | * @since 0.1.1 |
a93fb468 AJ |
648 | */ |
649 | enum sp_return sp_get_port_usb_vid_pid(const struct sp_port *port, int *usb_vid, int *usb_pid); | |
650 | ||
651 | /** | |
652 | * Get the USB manufacturer string of a USB serial adapter port. | |
653 | * | |
35578b06 | 654 | * @param[in] port Pointer to a port structure. Must not be NULL. |
a93fb468 AJ |
655 | * |
656 | * @return The port manufacturer string, or NULL if an invalid port is passed. | |
35578b06 UH |
657 | * The manufacturer string is part of the port structure and may not |
658 | * be used after the port structure has been freed. | |
a93fb468 | 659 | * |
3f2f48fc | 660 | * @since 0.1.1 |
a93fb468 AJ |
661 | */ |
662 | char *sp_get_port_usb_manufacturer(const struct sp_port *port); | |
663 | ||
664 | /** | |
665 | * Get the USB product string of a USB serial adapter port. | |
666 | * | |
35578b06 | 667 | * @param[in] port Pointer to a port structure. Must not be NULL. |
a93fb468 AJ |
668 | * |
669 | * @return The port product string, or NULL if an invalid port is passed. | |
35578b06 UH |
670 | * The product string is part of the port structure and may not be |
671 | * used after the port structure has been freed. | |
a93fb468 | 672 | * |
3f2f48fc | 673 | * @since 0.1.1 |
a93fb468 AJ |
674 | */ |
675 | char *sp_get_port_usb_product(const struct sp_port *port); | |
676 | ||
677 | /** | |
678 | * Get the USB serial number string of a USB serial adapter port. | |
679 | * | |
35578b06 | 680 | * @param[in] port Pointer to a port structure. Must not be NULL. |
a93fb468 AJ |
681 | * |
682 | * @return The port serial number, or NULL if an invalid port is passed. | |
35578b06 UH |
683 | * The serial number string is part of the port structure and may |
684 | * not be used after the port structure has been freed. | |
a93fb468 | 685 | * |
3f2f48fc | 686 | * @since 0.1.1 |
a93fb468 AJ |
687 | */ |
688 | char *sp_get_port_usb_serial(const struct sp_port *port); | |
689 | ||
690 | /** | |
e33dcf90 | 691 | * Get the MAC address of a Bluetooth serial adapter port. |
a93fb468 | 692 | * |
35578b06 | 693 | * @param[in] port Pointer to a port structure. Must not be NULL. |
a93fb468 | 694 | * |
e33dcf90 | 695 | * @return The port MAC address, or NULL if an invalid port is passed. |
35578b06 UH |
696 | * The MAC address string is part of the port structure and may not |
697 | * be used after the port structure has been freed. | |
a93fb468 | 698 | * |
3f2f48fc | 699 | * @since 0.1.1 |
a93fb468 AJ |
700 | */ |
701 | char *sp_get_port_bluetooth_address(const struct sp_port *port); | |
702 | ||
0151b157 ML |
703 | /** |
704 | * Get the operating system handle for a port. | |
705 | * | |
706 | * The type of the handle depends on the operating system. On Unix based | |
707 | * systems, the handle is a file descriptor of type "int". On Windows, the | |
708 | * handle is of type "HANDLE". The user should allocate a variable of the | |
709 | * appropriate type and pass a pointer to this to receive the result. | |
710 | * | |
711 | * To obtain a valid handle, the port must first be opened by calling | |
712 | * sp_open() using the same port structure. | |
713 | * | |
714 | * After the port is closed or the port structure freed, the handle may | |
715 | * no longer be valid. | |
716 | * | |
717 | * @warning This feature is provided so that programs may make use of | |
718 | * OS-specific functionality where desired. Doing so obviously | |
719 | * comes at a cost in portability. It also cannot be guaranteed | |
720 | * that direct usage of the OS handle will not conflict with the | |
721 | * library's own usage of the port. Be careful. | |
722 | * | |
35578b06 UH |
723 | * @param[in] port Pointer to a port structure. Must not be NULL. |
724 | * @param[out] result_ptr If any error is returned, the variable pointed to by | |
ff6da776 UH |
725 | * result_ptr will have unknown contents and should not |
726 | * be used. Otherwise, it will be set to point to the | |
727 | * OS handle. Must not be NULL. | |
35578b06 | 728 | * |
0151b157 | 729 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
730 | * |
731 | * @since 0.1.0 | |
0151b157 ML |
732 | */ |
733 | enum sp_return sp_get_port_handle(const struct sp_port *port, void *result_ptr); | |
734 | ||
cd5f5281 | 735 | /** |
cf9d365c | 736 | * @} |
144a598f UH |
737 | * |
738 | * @defgroup Configuration Configuration | |
739 | * | |
740 | * Setting and querying serial port parameters. | |
cf9d365c UH |
741 | * @{ |
742 | */ | |
e96d8bd2 | 743 | |
9b1502ef ML |
744 | /** |
745 | * Allocate a port configuration structure. | |
746 | * | |
480d750c ML |
747 | * The user should allocate a variable of type "struct sp_port_config *" and |
748 | * pass a pointer to this to receive the result. The variable will be updated | |
749 | * to point to the new configuration structure. The structure is opaque and | |
750 | * must be accessed via the functions provided. | |
9b1502ef ML |
751 | * |
752 | * All parameters in the structure will be initialised to special values which | |
753 | * are ignored by sp_set_config(). | |
754 | * | |
755 | * The structure should be freed after use by calling sp_free_config(). | |
756 | * | |
ff6da776 UH |
757 | * @param[out] config_ptr If any error is returned, the variable pointed to by |
758 | * config_ptr will be set to NULL. Otherwise, it will | |
759 | * be set to point to the allocated config structure. | |
35578b06 | 760 | * Must not be NULL. |
9b1502ef ML |
761 | * |
762 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
763 | * |
764 | * @since 0.1.0 | |
9b1502ef ML |
765 | */ |
766 | enum sp_return sp_new_config(struct sp_port_config **config_ptr); | |
767 | ||
768 | /** | |
769 | * Free a port configuration structure. | |
770 | * | |
35578b06 | 771 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
1652aa86 UH |
772 | * |
773 | * @since 0.1.0 | |
9b1502ef ML |
774 | */ |
775 | void sp_free_config(struct sp_port_config *config); | |
776 | ||
cd5f5281 | 777 | /** |
cf9d365c UH |
778 | * Get the current configuration of the specified serial port. |
779 | * | |
9b1502ef ML |
780 | * The user should allocate a configuration structure using sp_new_config() |
781 | * and pass this as the config parameter. The configuration structure will | |
782 | * be updated with the port configuration. | |
cf9d365c | 783 | * |
9b1502ef ML |
784 | * Any parameters that are configured with settings not recognised or |
785 | * supported by libserialport, will be set to special values that are | |
786 | * ignored by sp_set_config(). | |
cf9d365c | 787 | * |
35578b06 UH |
788 | * @param[in] port Pointer to a port structure. Must not be NULL. |
789 | * @param[out] config Pointer to a configuration structure that will hold | |
ff6da776 UH |
790 | * the result. Upon errors the contents of the config |
791 | * struct will not be changed. Must not be NULL. | |
35578b06 | 792 | * |
f36c6395 | 793 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
794 | * |
795 | * @since 0.1.0 | |
cf9d365c | 796 | */ |
eb6ed20f | 797 | enum sp_return sp_get_config(struct sp_port *port, struct sp_port_config *config); |
cd5f5281 ML |
798 | |
799 | /** | |
cf9d365c UH |
800 | * Set the configuration for the specified serial port. |
801 | * | |
9b1502ef ML |
802 | * For each parameter in the configuration, there is a special value (usually |
803 | * -1, but see the documentation for each field). These values will be ignored | |
804 | * and the corresponding setting left unchanged on the port. | |
cf9d365c | 805 | * |
ff6da776 UH |
806 | * Upon errors, the configuration of the serial port is unknown since |
807 | * partial/incomplete config updates may have happened. | |
808 | * | |
35578b06 UH |
809 | * @param[in] port Pointer to a port structure. Must not be NULL. |
810 | * @param[in] config Pointer to a configuration structure. Must not be NULL. | |
811 | * | |
f36c6395 | 812 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
813 | * |
814 | * @since 0.1.0 | |
cf9d365c | 815 | */ |
eb6ed20f | 816 | enum sp_return sp_set_config(struct sp_port *port, const struct sp_port_config *config); |
cd5f5281 ML |
817 | |
818 | /** | |
cf9d365c UH |
819 | * Set the baud rate for the specified serial port. |
820 | * | |
35578b06 UH |
821 | * @param[in] port Pointer to a port structure. Must not be NULL. |
822 | * @param[in] baudrate Baud rate in bits per second. | |
cf9d365c | 823 | * |
f36c6395 | 824 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
825 | * |
826 | * @since 0.1.0 | |
cf9d365c | 827 | */ |
eb6ed20f | 828 | enum sp_return sp_set_baudrate(struct sp_port *port, int baudrate); |
cd5f5281 ML |
829 | |
830 | /** | |
9b1502ef ML |
831 | * Get the baud rate from a port configuration. |
832 | * | |
35578b06 UH |
833 | * The user should allocate a variable of type int and |
834 | * pass a pointer to this to receive the result. | |
9b1502ef | 835 | * |
35578b06 UH |
836 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
837 | * @param[out] baudrate_ptr Pointer to a variable to store the result. Must not be NULL. | |
9b1502ef ML |
838 | * |
839 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
840 | * |
841 | * @since 0.1.0 | |
9b1502ef ML |
842 | */ |
843 | enum sp_return sp_get_config_baudrate(const struct sp_port_config *config, int *baudrate_ptr); | |
844 | ||
845 | /** | |
846 | * Set the baud rate in a port configuration. | |
847 | * | |
35578b06 UH |
848 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
849 | * @param[in] baudrate Baud rate in bits per second, or -1 to retain the current setting. | |
9b1502ef ML |
850 | * |
851 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
852 | * |
853 | * @since 0.1.0 | |
9b1502ef ML |
854 | */ |
855 | enum sp_return sp_set_config_baudrate(struct sp_port_config *config, int baudrate); | |
856 | ||
857 | /** | |
858 | * Set the data bits for the specified serial port. | |
cf9d365c | 859 | * |
35578b06 UH |
860 | * @param[in] port Pointer to a port structure. Must not be NULL. |
861 | * @param[in] bits Number of data bits. | |
cf9d365c | 862 | * |
f36c6395 | 863 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
864 | * |
865 | * @since 0.1.0 | |
cf9d365c | 866 | */ |
eb6ed20f | 867 | enum sp_return sp_set_bits(struct sp_port *port, int bits); |
cd5f5281 ML |
868 | |
869 | /** | |
9b1502ef ML |
870 | * Get the data bits from a port configuration. |
871 | * | |
35578b06 UH |
872 | * The user should allocate a variable of type int and |
873 | * pass a pointer to this to receive the result. | |
9b1502ef | 874 | * |
35578b06 UH |
875 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
876 | * @param[out] bits_ptr Pointer to a variable to store the result. Must not be NULL. | |
9b1502ef ML |
877 | * |
878 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
879 | * |
880 | * @since 0.1.0 | |
9b1502ef ML |
881 | */ |
882 | enum sp_return sp_get_config_bits(const struct sp_port_config *config, int *bits_ptr); | |
883 | ||
884 | /** | |
885 | * Set the data bits in a port configuration. | |
886 | * | |
35578b06 UH |
887 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
888 | * @param[in] bits Number of data bits, or -1 to retain the current setting. | |
9b1502ef ML |
889 | * |
890 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
891 | * |
892 | * @since 0.1.0 | |
9b1502ef ML |
893 | */ |
894 | enum sp_return sp_set_config_bits(struct sp_port_config *config, int bits); | |
895 | ||
896 | /** | |
897 | * Set the parity setting for the specified serial port. | |
cf9d365c | 898 | * |
35578b06 UH |
899 | * @param[in] port Pointer to a port structure. Must not be NULL. |
900 | * @param[in] parity Parity setting. | |
cf9d365c | 901 | * |
f36c6395 | 902 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
903 | * |
904 | * @since 0.1.0 | |
cf9d365c | 905 | */ |
eb6ed20f | 906 | enum sp_return sp_set_parity(struct sp_port *port, enum sp_parity parity); |
cd5f5281 ML |
907 | |
908 | /** | |
9b1502ef ML |
909 | * Get the parity setting from a port configuration. |
910 | * | |
35578b06 UH |
911 | * The user should allocate a variable of type enum sp_parity and |
912 | * pass a pointer to this to receive the result. | |
9b1502ef | 913 | * |
35578b06 UH |
914 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
915 | * @param[out] parity_ptr Pointer to a variable to store the result. Must not be NULL. | |
9b1502ef ML |
916 | * |
917 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
918 | * |
919 | * @since 0.1.0 | |
9b1502ef ML |
920 | */ |
921 | enum sp_return sp_get_config_parity(const struct sp_port_config *config, enum sp_parity *parity_ptr); | |
922 | ||
923 | /** | |
924 | * Set the parity setting in a port configuration. | |
925 | * | |
35578b06 UH |
926 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
927 | * @param[in] parity Parity setting, or -1 to retain the current setting. | |
9b1502ef ML |
928 | * |
929 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
930 | * |
931 | * @since 0.1.0 | |
9b1502ef ML |
932 | */ |
933 | enum sp_return sp_set_config_parity(struct sp_port_config *config, enum sp_parity parity); | |
934 | ||
935 | /** | |
936 | * Set the stop bits for the specified serial port. | |
cf9d365c | 937 | * |
35578b06 UH |
938 | * @param[in] port Pointer to a port structure. Must not be NULL. |
939 | * @param[in] stopbits Number of stop bits. | |
cf9d365c | 940 | * |
f36c6395 | 941 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
942 | * |
943 | * @since 0.1.0 | |
cf9d365c | 944 | */ |
eb6ed20f | 945 | enum sp_return sp_set_stopbits(struct sp_port *port, int stopbits); |
cd5f5281 ML |
946 | |
947 | /** | |
9b1502ef | 948 | * Get the stop bits from a port configuration. |
cf9d365c | 949 | * |
35578b06 UH |
950 | * The user should allocate a variable of type int and |
951 | * pass a pointer to this to receive the result. | |
cf9d365c | 952 | * |
35578b06 UH |
953 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
954 | * @param[out] stopbits_ptr Pointer to a variable to store the result. Must not be NULL. | |
cf9d365c | 955 | * |
f36c6395 | 956 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
957 | * |
958 | * @since 0.1.0 | |
cf9d365c | 959 | */ |
9b1502ef ML |
960 | enum sp_return sp_get_config_stopbits(const struct sp_port_config *config, int *stopbits_ptr); |
961 | ||
962 | /** | |
963 | * Set the stop bits in a port configuration. | |
964 | * | |
35578b06 UH |
965 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
966 | * @param[in] stopbits Number of stop bits, or -1 to retain the current setting. | |
9b1502ef ML |
967 | * |
968 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
969 | * |
970 | * @since 0.1.0 | |
9b1502ef ML |
971 | */ |
972 | enum sp_return sp_set_config_stopbits(struct sp_port_config *config, int stopbits); | |
18fc2dd1 | 973 | |
cd5f5281 | 974 | /** |
9b1502ef | 975 | * Set the RTS pin behaviour for the specified serial port. |
cf9d365c | 976 | * |
35578b06 UH |
977 | * @param[in] port Pointer to a port structure. Must not be NULL. |
978 | * @param[in] rts RTS pin mode. | |
cf9d365c | 979 | * |
f36c6395 | 980 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
981 | * |
982 | * @since 0.1.0 | |
cf9d365c | 983 | */ |
eb6ed20f | 984 | enum sp_return sp_set_rts(struct sp_port *port, enum sp_rts rts); |
cd5f5281 ML |
985 | |
986 | /** | |
9b1502ef ML |
987 | * Get the RTS pin behaviour from a port configuration. |
988 | * | |
35578b06 UH |
989 | * The user should allocate a variable of type enum sp_rts and |
990 | * pass a pointer to this to receive the result. | |
9b1502ef | 991 | * |
35578b06 UH |
992 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
993 | * @param[out] rts_ptr Pointer to a variable to store the result. Must not be NULL. | |
9b1502ef ML |
994 | * |
995 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
996 | * |
997 | * @since 0.1.0 | |
9b1502ef ML |
998 | */ |
999 | enum sp_return sp_get_config_rts(const struct sp_port_config *config, enum sp_rts *rts_ptr); | |
1000 | ||
1001 | /** | |
1002 | * Set the RTS pin behaviour in a port configuration. | |
1003 | * | |
35578b06 UH |
1004 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
1005 | * @param[in] rts RTS pin mode, or -1 to retain the current setting. | |
9b1502ef ML |
1006 | * |
1007 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1008 | * |
1009 | * @since 0.1.0 | |
9b1502ef ML |
1010 | */ |
1011 | enum sp_return sp_set_config_rts(struct sp_port_config *config, enum sp_rts rts); | |
1012 | ||
1013 | /** | |
1014 | * Set the CTS pin behaviour for the specified serial port. | |
cf9d365c | 1015 | * |
35578b06 UH |
1016 | * @param[in] port Pointer to a port structure. Must not be NULL. |
1017 | * @param[in] cts CTS pin mode. | |
cf9d365c | 1018 | * |
f36c6395 | 1019 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
1020 | * |
1021 | * @since 0.1.0 | |
cf9d365c | 1022 | */ |
eb6ed20f | 1023 | enum sp_return sp_set_cts(struct sp_port *port, enum sp_cts cts); |
cd5f5281 ML |
1024 | |
1025 | /** | |
9b1502ef ML |
1026 | * Get the CTS pin behaviour from a port configuration. |
1027 | * | |
35578b06 UH |
1028 | * The user should allocate a variable of type enum sp_cts and |
1029 | * pass a pointer to this to receive the result. | |
9b1502ef | 1030 | * |
35578b06 UH |
1031 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
1032 | * @param[out] cts_ptr Pointer to a variable to store the result. Must not be NULL. | |
9b1502ef ML |
1033 | * |
1034 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1035 | * |
1036 | * @since 0.1.0 | |
9b1502ef ML |
1037 | */ |
1038 | enum sp_return sp_get_config_cts(const struct sp_port_config *config, enum sp_cts *cts_ptr); | |
1039 | ||
1040 | /** | |
1041 | * Set the CTS pin behaviour in a port configuration. | |
1042 | * | |
35578b06 UH |
1043 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
1044 | * @param[in] cts CTS pin mode, or -1 to retain the current setting. | |
9b1502ef ML |
1045 | * |
1046 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1047 | * |
1048 | * @since 0.1.0 | |
9b1502ef ML |
1049 | */ |
1050 | enum sp_return sp_set_config_cts(struct sp_port_config *config, enum sp_cts cts); | |
1051 | ||
1052 | /** | |
1053 | * Set the DTR pin behaviour for the specified serial port. | |
cf9d365c | 1054 | * |
35578b06 UH |
1055 | * @param[in] port Pointer to a port structure. Must not be NULL. |
1056 | * @param[in] dtr DTR pin mode. | |
cf9d365c | 1057 | * |
f36c6395 | 1058 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
1059 | * |
1060 | * @since 0.1.0 | |
cf9d365c | 1061 | */ |
eb6ed20f | 1062 | enum sp_return sp_set_dtr(struct sp_port *port, enum sp_dtr dtr); |
cd5f5281 ML |
1063 | |
1064 | /** | |
9b1502ef ML |
1065 | * Get the DTR pin behaviour from a port configuration. |
1066 | * | |
35578b06 UH |
1067 | * The user should allocate a variable of type enum sp_dtr and |
1068 | * pass a pointer to this to receive the result. | |
9b1502ef | 1069 | * |
35578b06 UH |
1070 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
1071 | * @param[out] dtr_ptr Pointer to a variable to store the result. Must not be NULL. | |
9b1502ef ML |
1072 | * |
1073 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1074 | * |
1075 | * @since 0.1.0 | |
9b1502ef ML |
1076 | */ |
1077 | enum sp_return sp_get_config_dtr(const struct sp_port_config *config, enum sp_dtr *dtr_ptr); | |
1078 | ||
1079 | /** | |
1080 | * Set the DTR pin behaviour in a port configuration. | |
1081 | * | |
35578b06 UH |
1082 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
1083 | * @param[in] dtr DTR pin mode, or -1 to retain the current setting. | |
9b1502ef ML |
1084 | * |
1085 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1086 | * |
1087 | * @since 0.1.0 | |
9b1502ef ML |
1088 | */ |
1089 | enum sp_return sp_set_config_dtr(struct sp_port_config *config, enum sp_dtr dtr); | |
1090 | ||
1091 | /** | |
1092 | * Set the DSR pin behaviour for the specified serial port. | |
cf9d365c | 1093 | * |
35578b06 UH |
1094 | * @param[in] port Pointer to a port structure. Must not be NULL. |
1095 | * @param[in] dsr DSR pin mode. | |
cf9d365c | 1096 | * |
f36c6395 | 1097 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
1098 | * |
1099 | * @since 0.1.0 | |
cf9d365c | 1100 | */ |
eb6ed20f | 1101 | enum sp_return sp_set_dsr(struct sp_port *port, enum sp_dsr dsr); |
cd5f5281 ML |
1102 | |
1103 | /** | |
9b1502ef ML |
1104 | * Get the DSR pin behaviour from a port configuration. |
1105 | * | |
35578b06 UH |
1106 | * The user should allocate a variable of type enum sp_dsr and |
1107 | * pass a pointer to this to receive the result. | |
9b1502ef | 1108 | * |
35578b06 UH |
1109 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
1110 | * @param[out] dsr_ptr Pointer to a variable to store the result. Must not be NULL. | |
9b1502ef ML |
1111 | * |
1112 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1113 | * |
1114 | * @since 0.1.0 | |
9b1502ef ML |
1115 | */ |
1116 | enum sp_return sp_get_config_dsr(const struct sp_port_config *config, enum sp_dsr *dsr_ptr); | |
1117 | ||
1118 | /** | |
1119 | * Set the DSR pin behaviour in a port configuration. | |
1120 | * | |
35578b06 UH |
1121 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
1122 | * @param[in] dsr DSR pin mode, or -1 to retain the current setting. | |
9b1502ef ML |
1123 | * |
1124 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1125 | * |
1126 | * @since 0.1.0 | |
9b1502ef ML |
1127 | */ |
1128 | enum sp_return sp_set_config_dsr(struct sp_port_config *config, enum sp_dsr dsr); | |
1129 | ||
1130 | /** | |
1131 | * Set the XON/XOFF configuration for the specified serial port. | |
cf9d365c | 1132 | * |
35578b06 UH |
1133 | * @param[in] port Pointer to a port structure. Must not be NULL. |
1134 | * @param[in] xon_xoff XON/XOFF mode. | |
cf9d365c | 1135 | * |
f36c6395 | 1136 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
1137 | * |
1138 | * @since 0.1.0 | |
cf9d365c | 1139 | */ |
eb6ed20f | 1140 | enum sp_return sp_set_xon_xoff(struct sp_port *port, enum sp_xonxoff xon_xoff); |
e96d8bd2 | 1141 | |
9b1502ef ML |
1142 | /** |
1143 | * Get the XON/XOFF configuration from a port configuration. | |
1144 | * | |
35578b06 UH |
1145 | * The user should allocate a variable of type enum sp_xonxoff and |
1146 | * pass a pointer to this to receive the result. | |
9b1502ef | 1147 | * |
35578b06 UH |
1148 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
1149 | * @param[out] xon_xoff_ptr Pointer to a variable to store the result. Must not be NULL. | |
9b1502ef ML |
1150 | * |
1151 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1152 | * |
1153 | * @since 0.1.0 | |
9b1502ef ML |
1154 | */ |
1155 | enum sp_return sp_get_config_xon_xoff(const struct sp_port_config *config, enum sp_xonxoff *xon_xoff_ptr); | |
1156 | ||
1157 | /** | |
1158 | * Set the XON/XOFF configuration in a port configuration. | |
1159 | * | |
35578b06 UH |
1160 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
1161 | * @param[in] xon_xoff XON/XOFF mode, or -1 to retain the current setting. | |
9b1502ef ML |
1162 | * |
1163 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1164 | * |
1165 | * @since 0.1.0 | |
9b1502ef ML |
1166 | */ |
1167 | enum sp_return sp_set_config_xon_xoff(struct sp_port_config *config, enum sp_xonxoff xon_xoff); | |
1168 | ||
1169 | /** | |
1170 | * Set the flow control type in a port configuration. | |
1171 | * | |
1172 | * This function is a wrapper that sets the RTS, CTS, DTR, DSR and | |
1173 | * XON/XOFF settings as necessary for the specified flow control | |
1174 | * type. For more fine-grained control of these settings, use their | |
1175 | * individual configuration functions. | |
1176 | * | |
35578b06 UH |
1177 | * @param[in] config Pointer to a configuration structure. Must not be NULL. |
1178 | * @param[in] flowcontrol Flow control setting to use. | |
9b1502ef ML |
1179 | * |
1180 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1181 | * |
1182 | * @since 0.1.0 | |
9b1502ef ML |
1183 | */ |
1184 | enum sp_return sp_set_config_flowcontrol(struct sp_port_config *config, enum sp_flowcontrol flowcontrol); | |
1185 | ||
1186 | /** | |
1187 | * Set the flow control type for the specified serial port. | |
1188 | * | |
1189 | * This function is a wrapper that sets the RTS, CTS, DTR, DSR and | |
1190 | * XON/XOFF settings as necessary for the specified flow control | |
1191 | * type. For more fine-grained control of these settings, use their | |
1192 | * individual configuration functions. | |
1193 | * | |
35578b06 UH |
1194 | * @param[in] port Pointer to a port structure. Must not be NULL. |
1195 | * @param[in] flowcontrol Flow control setting to use. | |
9b1502ef ML |
1196 | * |
1197 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1198 | * |
1199 | * @since 0.1.0 | |
9b1502ef ML |
1200 | */ |
1201 | enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flowcontrol); | |
1202 | ||
091e75fe | 1203 | /** |
cf9d365c | 1204 | * @} |
144a598f UH |
1205 | * |
1206 | * @defgroup Data Data handling | |
1207 | * | |
1208 | * Reading, writing, and flushing data. | |
1209 | * | |
cf9d365c | 1210 | * @{ |
144a598f | 1211 | */ |
091e75fe ML |
1212 | |
1213 | /** | |
2007ce5e ML |
1214 | * Read bytes from the specified serial port, blocking until complete. |
1215 | * | |
b87deb7c ML |
1216 | * @warning If your program runs on Unix, defines its own signal handlers, and |
1217 | * needs to abort blocking reads when these are called, then you | |
1218 | * should not use this function. It repeats system calls that return | |
1219 | * with EINTR. To be able to abort a read from a signal handler, you | |
1220 | * should implement your own blocking read using sp_nonblocking_read() | |
2007ce5e ML |
1221 | * together with a blocking method that makes sense for your program. |
1222 | * E.g. you can obtain the file descriptor for an open port using | |
1223 | * sp_get_port_handle() and use this to call select() or pselect(), | |
1224 | * with appropriate arrangements to return if a signal is received. | |
cf9d365c | 1225 | * |
35578b06 UH |
1226 | * @param[in] port Pointer to a port structure. Must not be NULL. |
1227 | * @param[out] buf Buffer in which to store the bytes read. Must not be NULL. | |
1228 | * @param[in] count Requested number of bytes to read. | |
1b91c6ea | 1229 | * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely. |
e3dcf906 ML |
1230 | * |
1231 | * @return The number of bytes read on success, or a negative error code. If | |
1232 | * the number of bytes returned is less than that requested, the | |
1233 | * timeout was reached before the requested number of bytes was | |
1234 | * available. If timeout is zero, the function will always return | |
1235 | * either the requested number of bytes or a negative error code. | |
1652aa86 UH |
1236 | * |
1237 | * @since 0.1.0 | |
e3dcf906 | 1238 | */ |
1b91c6ea | 1239 | enum sp_return sp_blocking_read(struct sp_port *port, void *buf, size_t count, unsigned int timeout_ms); |
e3dcf906 | 1240 | |
e5c2630e ML |
1241 | /** |
1242 | * Read bytes from the specified serial port, returning as soon as any data is | |
1243 | * available. | |
1244 | * | |
1245 | * @warning If your program runs on Unix, defines its own signal handlers, and | |
1246 | * needs to abort blocking reads when these are called, then you | |
1247 | * should not use this function. It repeats system calls that return | |
1248 | * with EINTR. To be able to abort a read from a signal handler, you | |
1249 | * should implement your own blocking read using sp_nonblocking_read() | |
1250 | * together with a blocking method that makes sense for your program. | |
1251 | * E.g. you can obtain the file descriptor for an open port using | |
1252 | * sp_get_port_handle() and use this to call select() or pselect(), | |
1253 | * with appropriate arrangements to return if a signal is received. | |
1254 | * | |
1255 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1256 | * @param[out] buf Buffer in which to store the bytes read. Must not be NULL. | |
1257 | * @param[in] count Maximum number of bytes to read. Must not be zero. | |
1258 | * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely. | |
1259 | * | |
1260 | * @return The number of bytes read on success, or a negative error code. If | |
1261 | * the result is zero, the timeout was reached before any bytes were | |
1262 | * available. If timeout_ms is zero, the function will always return | |
1263 | * either at least one byte, or a negative error code. | |
1264 | * | |
1265 | * @since 0.1.1 | |
1266 | */ | |
1267 | enum sp_return sp_blocking_read_next(struct sp_port *port, void *buf, size_t count, unsigned int timeout_ms); | |
1268 | ||
e3dcf906 ML |
1269 | /** |
1270 | * Read bytes from the specified serial port, without blocking. | |
cf9d365c | 1271 | * |
35578b06 UH |
1272 | * @param[in] port Pointer to a port structure. Must not be NULL. |
1273 | * @param[out] buf Buffer in which to store the bytes read. Must not be NULL. | |
1274 | * @param[in] count Maximum number of bytes to read. | |
cf9d365c | 1275 | * |
e3dcf906 ML |
1276 | * @return The number of bytes read on success, or a negative error code. The |
1277 | * number of bytes returned may be any number from zero to the maximum | |
1278 | * that was requested. | |
1652aa86 UH |
1279 | * |
1280 | * @since 0.1.0 | |
e3dcf906 ML |
1281 | */ |
1282 | enum sp_return sp_nonblocking_read(struct sp_port *port, void *buf, size_t count); | |
1283 | ||
1284 | /** | |
1285 | * Write bytes to the specified serial port, blocking until complete. | |
1286 | * | |
1287 | * Note that this function only ensures that the accepted bytes have been | |
1288 | * written to the OS; they may be held in driver or hardware buffers and not | |
1289 | * yet physically transmitted. To check whether all written bytes have actually | |
1290 | * been transmitted, use the sp_output_waiting() function. To wait until all | |
1291 | * written bytes have actually been transmitted, use the sp_drain() function. | |
1292 | * | |
b87deb7c ML |
1293 | * @warning If your program runs on Unix, defines its own signal handlers, and |
1294 | * needs to abort blocking writes when these are called, then you | |
1295 | * should not use this function. It repeats system calls that return | |
1296 | * with EINTR. To be able to abort a write from a signal handler, you | |
1297 | * should implement your own blocking write using sp_nonblocking_write() | |
2007ce5e ML |
1298 | * together with a blocking method that makes sense for your program. |
1299 | * E.g. you can obtain the file descriptor for an open port using | |
1300 | * sp_get_port_handle() and use this to call select() or pselect(), | |
1301 | * with appropriate arrangements to return if a signal is received. | |
1302 | * | |
35578b06 UH |
1303 | * @param[in] port Pointer to a port structure. Must not be NULL. |
1304 | * @param[in] buf Buffer containing the bytes to write. Must not be NULL. | |
1305 | * @param[in] count Requested number of bytes to write. | |
1b91c6ea | 1306 | * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely. |
e3dcf906 | 1307 | * |
85987464 ML |
1308 | * @return The number of bytes written on success, or a negative error code. |
1309 | * If the number of bytes returned is less than that requested, the | |
e3dcf906 | 1310 | * timeout was reached before the requested number of bytes was |
85987464 | 1311 | * written. If timeout is zero, the function will always return |
e3dcf906 ML |
1312 | * either the requested number of bytes or a negative error code. In |
1313 | * the event of an error there is no way to determine how many bytes | |
cfa5af67 | 1314 | * were sent before the error occurred. |
1652aa86 UH |
1315 | * |
1316 | * @since 0.1.0 | |
cf9d365c | 1317 | */ |
1b91c6ea | 1318 | enum sp_return sp_blocking_write(struct sp_port *port, const void *buf, size_t count, unsigned int timeout_ms); |
091e75fe ML |
1319 | |
1320 | /** | |
e3dcf906 | 1321 | * Write bytes to the specified serial port, without blocking. |
cf9d365c | 1322 | * |
e3dcf906 ML |
1323 | * Note that this function only ensures that the accepted bytes have been |
1324 | * written to the OS; they may be held in driver or hardware buffers and not | |
1325 | * yet physically transmitted. To check whether all written bytes have actually | |
1326 | * been transmitted, use the sp_output_waiting() function. To wait until all | |
1327 | * written bytes have actually been transmitted, use the sp_drain() function. | |
cf9d365c | 1328 | * |
35578b06 UH |
1329 | * @param[in] port Pointer to a port structure. Must not be NULL. |
1330 | * @param[in] buf Buffer containing the bytes to write. Must not be NULL. | |
1331 | * @param[in] count Maximum number of bytes to write. | |
cf9d365c | 1332 | * |
f36c6395 | 1333 | * @return The number of bytes written on success, or a negative error code. |
e3dcf906 ML |
1334 | * The number of bytes returned may be any number from zero to the |
1335 | * maximum that was requested. | |
1652aa86 UH |
1336 | * |
1337 | * @since 0.1.0 | |
cf9d365c | 1338 | */ |
e3dcf906 | 1339 | enum sp_return sp_nonblocking_write(struct sp_port *port, const void *buf, size_t count); |
091e75fe | 1340 | |
3353c22f ML |
1341 | /** |
1342 | * Gets the number of bytes waiting in the input buffer. | |
1343 | * | |
35578b06 | 1344 | * @param[in] port Pointer to a port structure. Must not be NULL. |
3353c22f ML |
1345 | * |
1346 | * @return Number of bytes waiting on success, a negative error code otherwise. | |
1652aa86 UH |
1347 | * |
1348 | * @since 0.1.0 | |
3353c22f ML |
1349 | */ |
1350 | enum sp_return sp_input_waiting(struct sp_port *port); | |
1351 | ||
1352 | /** | |
1353 | * Gets the number of bytes waiting in the output buffer. | |
1354 | * | |
35578b06 | 1355 | * @param[in] port Pointer to a port structure. Must not be NULL. |
3353c22f ML |
1356 | * |
1357 | * @return Number of bytes waiting on success, a negative error code otherwise. | |
1652aa86 UH |
1358 | * |
1359 | * @since 0.1.0 | |
3353c22f ML |
1360 | */ |
1361 | enum sp_return sp_output_waiting(struct sp_port *port); | |
1362 | ||
091e75fe | 1363 | /** |
fd8fd11a ML |
1364 | * Flush serial port buffers. Data in the selected buffer(s) is discarded. |
1365 | * | |
35578b06 UH |
1366 | * @param[in] port Pointer to a port structure. Must not be NULL. |
1367 | * @param[in] buffers Which buffer(s) to flush. | |
cf9d365c | 1368 | * |
f36c6395 | 1369 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
1370 | * |
1371 | * @since 0.1.0 | |
cf9d365c | 1372 | */ |
fd8fd11a | 1373 | enum sp_return sp_flush(struct sp_port *port, enum sp_buffer buffers); |
091e75fe | 1374 | |
69a3739c ML |
1375 | /** |
1376 | * Wait for buffered data to be transmitted. | |
1377 | * | |
2c827b21 ML |
1378 | * @warning If your program runs on Unix, defines its own signal handlers, and |
1379 | * needs to abort draining the output buffer when when these are | |
1380 | * called, then you should not use this function. It repeats system | |
1381 | * calls that return with EINTR. To be able to abort a drain from a | |
1382 | * signal handler, you would need to implement your own blocking | |
1383 | * drain by polling the result of sp_output_waiting(). | |
1384 | * | |
35578b06 | 1385 | * @param[in] port Pointer to a port structure. Must not be NULL. |
3f099f4f | 1386 | * |
f36c6395 | 1387 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
1388 | * |
1389 | * @since 0.1.0 | |
69a3739c ML |
1390 | */ |
1391 | enum sp_return sp_drain(struct sp_port *port); | |
1392 | ||
6f1186aa ML |
1393 | /** |
1394 | * @} | |
144a598f UH |
1395 | * |
1396 | * @defgroup Waiting Waiting | |
1397 | * | |
1398 | * Waiting for events and timeout handling. | |
1399 | * | |
6f1186aa ML |
1400 | * @{ |
1401 | */ | |
1402 | ||
1403 | /** | |
1404 | * Allocate storage for a set of events. | |
1405 | * | |
1406 | * The user should allocate a variable of type struct sp_event_set *, | |
1407 | * then pass a pointer to this variable to receive the result. | |
1408 | * | |
1409 | * The result should be freed after use by calling sp_free_event_set(). | |
1410 | * | |
35578b06 UH |
1411 | * @param[out] result_ptr If any error is returned, the variable pointed to by |
1412 | * result_ptr will be set to NULL. Otherwise, it will | |
1413 | * be set to point to the event set. Must not be NULL. | |
1414 | * | |
6f1186aa | 1415 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
1416 | * |
1417 | * @since 0.1.0 | |
6f1186aa ML |
1418 | */ |
1419 | enum sp_return sp_new_event_set(struct sp_event_set **result_ptr); | |
1420 | ||
1421 | /** | |
1422 | * Add events to a struct sp_event_set for a given port. | |
1423 | * | |
1424 | * The port must first be opened by calling sp_open() using the same port | |
1425 | * structure. | |
1426 | * | |
1427 | * After the port is closed or the port structure freed, the results may | |
1428 | * no longer be valid. | |
1429 | * | |
35578b06 UH |
1430 | * @param[in,out] event_set Event set to update. Must not be NULL. |
1431 | * @param[in] port Pointer to a port structure. Must not be NULL. | |
1432 | * @param[in] mask Bitmask of events to be waited for. | |
6f1186aa ML |
1433 | * |
1434 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1435 | * |
1436 | * @since 0.1.0 | |
6f1186aa ML |
1437 | */ |
1438 | enum sp_return sp_add_port_events(struct sp_event_set *event_set, | |
1439 | const struct sp_port *port, enum sp_event mask); | |
1440 | ||
1441 | /** | |
1442 | * Wait for any of a set of events to occur. | |
1443 | * | |
35578b06 | 1444 | * @param[in] event_set Event set to wait on. Must not be NULL. |
1b91c6ea | 1445 | * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely. |
6f1186aa ML |
1446 | * |
1447 | * @return SP_OK upon success, a negative error code otherwise. | |
1652aa86 UH |
1448 | * |
1449 | * @since 0.1.0 | |
6f1186aa | 1450 | */ |
1b91c6ea | 1451 | enum sp_return sp_wait(struct sp_event_set *event_set, unsigned int timeout_ms); |
6f1186aa ML |
1452 | |
1453 | /** | |
1454 | * Free a structure allocated by sp_new_event_set(). | |
1652aa86 | 1455 | * |
35578b06 UH |
1456 | * @param[in] event_set Event set to free. Must not be NULL. |
1457 | * | |
1652aa86 | 1458 | * @since 0.1.0 |
6f1186aa ML |
1459 | */ |
1460 | void sp_free_event_set(struct sp_event_set *event_set); | |
1461 | ||
90cc3ee6 ML |
1462 | /** |
1463 | * @} | |
144a598f UH |
1464 | * |
1465 | * @defgroup Signals Signals | |
1466 | * | |
1467 | * Port signalling operations. | |
1468 | * | |
90cc3ee6 ML |
1469 | * @{ |
1470 | */ | |
1471 | ||
8cf7c697 ML |
1472 | /** |
1473 | * Gets the status of the control signals for the specified port. | |
1474 | * | |
1475 | * The user should allocate a variable of type "enum sp_signal" and pass a | |
1476 | * pointer to this variable to receive the result. The result is a bitmask | |
1477 | * in which individual signals can be checked by bitwise OR with values of | |
1478 | * the sp_signal enum. | |
1479 | * | |
35578b06 UH |
1480 | * @param[in] port Pointer to a port structure. Must not be NULL. |
1481 | * @param[out] signal_mask Pointer to a variable to receive the result. | |
1482 | * Must not be NULL. | |
8cf7c697 | 1483 | * |
f36c6395 | 1484 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
1485 | * |
1486 | * @since 0.1.0 | |
8cf7c697 | 1487 | */ |
f3ccf157 | 1488 | enum sp_return sp_get_signals(struct sp_port *port, enum sp_signal *signal_mask); |
8cf7c697 | 1489 | |
90cc3ee6 ML |
1490 | /** |
1491 | * Put the port transmit line into the break state. | |
1492 | * | |
35578b06 | 1493 | * @param[in] port Pointer to a port structure. Must not be NULL. |
3f099f4f | 1494 | * |
f36c6395 | 1495 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
1496 | * |
1497 | * @since 0.1.0 | |
90cc3ee6 ML |
1498 | */ |
1499 | enum sp_return sp_start_break(struct sp_port *port); | |
1500 | ||
1501 | /** | |
1502 | * Take the port transmit line out of the break state. | |
1503 | * | |
35578b06 | 1504 | * @param[in] port Pointer to a port structure. Must not be NULL. |
3f099f4f | 1505 | * |
f36c6395 | 1506 | * @return SP_OK upon success, a negative error code otherwise. |
1652aa86 UH |
1507 | * |
1508 | * @since 0.1.0 | |
90cc3ee6 ML |
1509 | */ |
1510 | enum sp_return sp_end_break(struct sp_port *port); | |
1511 | ||
091e75fe | 1512 | /** |
cf9d365c | 1513 | * @} |
144a598f UH |
1514 | * |
1515 | * @defgroup Errors Errors | |
1516 | * | |
1517 | * Obtaining error information. | |
1518 | * | |
cf9d365c | 1519 | * @{ |
144a598f | 1520 | */ |
091e75fe | 1521 | |
cd5f5281 | 1522 | /** |
cf9d365c UH |
1523 | * Get the error code for a failed operation. |
1524 | * | |
1525 | * In order to obtain the correct result, this function should be called | |
1526 | * straight after the failure, before executing any other system operations. | |
ec4b55ae ML |
1527 | * The result is thread-specific, and only valid when called immediately |
1528 | * after a previous call returning SP_ERR_FAIL. | |
cf9d365c UH |
1529 | * |
1530 | * @return The system's numeric code for the error that caused the last | |
1531 | * operation to fail. | |
1652aa86 UH |
1532 | * |
1533 | * @since 0.1.0 | |
cf9d365c | 1534 | */ |
74510d4b | 1535 | int sp_last_error_code(void); |
cd5f5281 ML |
1536 | |
1537 | /** | |
cf9d365c UH |
1538 | * Get the error message for a failed operation. |
1539 | * | |
1540 | * In order to obtain the correct result, this function should be called | |
1541 | * straight after the failure, before executing other system operations. | |
ec4b55ae ML |
1542 | * The result is thread-specific, and only valid when called immediately |
1543 | * after a previous call returning SP_ERR_FAIL. | |
cf9d365c UH |
1544 | * |
1545 | * @return The system's message for the error that caused the last | |
1546 | * operation to fail. This string may be allocated by the function, | |
1547 | * and should be freed after use by calling sp_free_error_message(). | |
1652aa86 UH |
1548 | * |
1549 | * @since 0.1.0 | |
cf9d365c | 1550 | */ |
74510d4b | 1551 | char *sp_last_error_message(void); |
cd5f5281 ML |
1552 | |
1553 | /** | |
cf9d365c | 1554 | * Free an error message returned by sp_last_error_message(). |
1652aa86 | 1555 | * |
35578b06 UH |
1556 | * @param[in] message The error message string to free. Must not be NULL. |
1557 | * | |
1652aa86 | 1558 | * @since 0.1.0 |
cf9d365c | 1559 | */ |
74510d4b | 1560 | void sp_free_error_message(char *message); |
e8ffaee9 | 1561 | |
863b35e6 ML |
1562 | /** |
1563 | * Set the handler function for library debugging messages. | |
1564 | * | |
1565 | * Debugging messages are generated by the library during each operation, | |
1566 | * to help in diagnosing problems. The handler will be called for each | |
1567 | * message. The handler can be set to NULL to ignore all debug messages. | |
1568 | * | |
1569 | * The handler function should accept a format string and variable length | |
1570 | * argument list, in the same manner as e.g. printf(). | |
1571 | * | |
1572 | * The default handler is sp_default_debug_handler(). | |
1652aa86 | 1573 | * |
35578b06 UH |
1574 | * @param[in] handler The handler function to use. Can be NULL (in that case |
1575 | * all debug messages will be ignored). | |
1576 | * | |
1652aa86 | 1577 | * @since 0.1.0 |
863b35e6 ML |
1578 | */ |
1579 | void sp_set_debug_handler(void (*handler)(const char *format, ...)); | |
1580 | ||
1581 | /** | |
1582 | * Default handler function for library debugging messages. | |
1583 | * | |
1584 | * This function prints debug messages to the standard error stream if the | |
1585 | * environment variable LIBSERIALPORT_DEBUG is set. Otherwise, they are | |
1586 | * ignored. | |
1652aa86 | 1587 | * |
35578b06 UH |
1588 | * @param[in] format The format string to use. Must not be NULL. |
1589 | * @param[in] ... The variable length argument list to use. | |
1590 | * | |
1652aa86 | 1591 | * @since 0.1.0 |
863b35e6 ML |
1592 | */ |
1593 | void sp_default_debug_handler(const char *format, ...); | |
1594 | ||
cf9d365c | 1595 | /** @} */ |
091e75fe | 1596 | |
524b0e14 | 1597 | /** |
144a598f UH |
1598 | * @defgroup Versions Versions |
1599 | * | |
1600 | * Version number querying functions, definitions, and macros. | |
524b0e14 UH |
1601 | * |
1602 | * This set of API calls returns two different version numbers related | |
1603 | * to libserialport. The "package version" is the release version number of the | |
1604 | * libserialport tarball in the usual "major.minor.micro" format, e.g. "0.1.0". | |
1605 | * | |
1606 | * The "library version" is independent of that; it is the libtool version | |
1607 | * number in the "current:revision:age" format, e.g. "2:0:0". | |
1608 | * See http://www.gnu.org/software/libtool/manual/libtool.html#Libtool-versioning for details. | |
1609 | * | |
1610 | * Both version numbers (and/or individual components of them) can be | |
1611 | * retrieved via the API calls at runtime, and/or they can be checked at | |
1612 | * compile/preprocessor time using the respective macros. | |
1613 | * | |
1614 | * @{ | |
1615 | */ | |
1616 | ||
1617 | /* | |
1618 | * Package version macros (can be used for conditional compilation). | |
1619 | */ | |
1620 | ||
1621 | /** The libserialport package 'major' version number. */ | |
f1c916ed | 1622 | #undef SP_PACKAGE_VERSION_MAJOR |
524b0e14 UH |
1623 | |
1624 | /** The libserialport package 'minor' version number. */ | |
f1c916ed | 1625 | #undef SP_PACKAGE_VERSION_MINOR |
524b0e14 UH |
1626 | |
1627 | /** The libserialport package 'micro' version number. */ | |
f1c916ed | 1628 | #undef SP_PACKAGE_VERSION_MICRO |
524b0e14 UH |
1629 | |
1630 | /** The libserialport package version ("major.minor.micro") as string. */ | |
f1c916ed | 1631 | #undef SP_PACKAGE_VERSION_STRING |
524b0e14 UH |
1632 | |
1633 | /* | |
1634 | * Library/libtool version macros (can be used for conditional compilation). | |
1635 | */ | |
1636 | ||
1637 | /** The libserialport libtool 'current' version number. */ | |
f1c916ed | 1638 | #undef SP_LIB_VERSION_CURRENT |
524b0e14 UH |
1639 | |
1640 | /** The libserialport libtool 'revision' version number. */ | |
f1c916ed | 1641 | #undef SP_LIB_VERSION_REVISION |
524b0e14 UH |
1642 | |
1643 | /** The libserialport libtool 'age' version number. */ | |
f1c916ed | 1644 | #undef SP_LIB_VERSION_AGE |
524b0e14 UH |
1645 | |
1646 | /** The libserialport libtool version ("current:revision:age") as string. */ | |
f1c916ed | 1647 | #undef SP_LIB_VERSION_STRING |
524b0e14 UH |
1648 | |
1649 | /** | |
1650 | * Get the major libserialport package version number. | |
1651 | * | |
1652 | * @return The major package version number. | |
1653 | * | |
1654 | * @since 0.1.0 | |
1655 | */ | |
1656 | int sp_get_major_package_version(void); | |
1657 | ||
1658 | /** | |
1659 | * Get the minor libserialport package version number. | |
1660 | * | |
1661 | * @return The minor package version number. | |
1662 | * | |
1663 | * @since 0.1.0 | |
1664 | */ | |
1665 | int sp_get_minor_package_version(void); | |
1666 | ||
1667 | /** | |
1668 | * Get the micro libserialport package version number. | |
1669 | * | |
1670 | * @return The micro package version number. | |
1671 | * | |
1672 | * @since 0.1.0 | |
1673 | */ | |
1674 | int sp_get_micro_package_version(void); | |
1675 | ||
1676 | /** | |
1677 | * Get the libserialport package version number as a string. | |
1678 | * | |
1679 | * @return The package version number string. The returned string is | |
1680 | * static and thus should NOT be free'd by the caller. | |
1681 | * | |
1682 | * @since 0.1.0 | |
1683 | */ | |
1684 | const char *sp_get_package_version_string(void); | |
1685 | ||
1686 | /** | |
1687 | * Get the "current" part of the libserialport library version number. | |
1688 | * | |
1689 | * @return The "current" library version number. | |
1690 | * | |
1691 | * @since 0.1.0 | |
1692 | */ | |
1693 | int sp_get_current_lib_version(void); | |
1694 | ||
1695 | /** | |
1696 | * Get the "revision" part of the libserialport library version number. | |
1697 | * | |
1698 | * @return The "revision" library version number. | |
1699 | * | |
1700 | * @since 0.1.0 | |
1701 | */ | |
1702 | int sp_get_revision_lib_version(void); | |
1703 | ||
1704 | /** | |
1705 | * Get the "age" part of the libserialport library version number. | |
1706 | * | |
1707 | * @return The "age" library version number. | |
1708 | * | |
1709 | * @since 0.1.0 | |
1710 | */ | |
1711 | int sp_get_age_lib_version(void); | |
1712 | ||
1713 | /** | |
1714 | * Get the libserialport library version number as a string. | |
1715 | * | |
1716 | * @return The library version number string. The returned string is | |
1717 | * static and thus should NOT be free'd by the caller. | |
1718 | * | |
1719 | * @since 0.1.0 | |
1720 | */ | |
1721 | const char *sp_get_lib_version_string(void); | |
1722 | ||
1723 | /** @} */ | |
1724 | ||
7c8d67ef ML |
1725 | /** |
1726 | * @example list_ports.c Getting a list of ports present on the system. | |
1727 | * @example port_info.c Getting information on a particular serial port. | |
1728 | */ | |
1729 | ||
5ef8a1ed UH |
1730 | #ifdef __cplusplus |
1731 | } | |
1732 | #endif | |
1733 | ||
8645feda | 1734 | #endif |