]>
Commit | Line | Data |
---|---|---|
0aba65da UH |
1 | /* |
2 | * This file is part of the sigrok project. | |
3 | * | |
13d8e03c | 4 | * Copyright (C) 2013 Bert Vermeulen <bert@biot.com> |
0aba65da UH |
5 | * |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #include "protocol.h" | |
21 | ||
22 | #define SERIALCOMM "115200/8n1" | |
23 | ||
e46aa4f6 | 24 | static const int32_t hwopts[] = { |
1953564a BV |
25 | SR_CONF_CONN, |
26 | SR_CONF_SERIALCOMM, | |
aeabd308 UH |
27 | }; |
28 | ||
e46aa4f6 | 29 | static const int32_t hwcaps[] = { |
1953564a BV |
30 | SR_CONF_LOGIC_ANALYZER, |
31 | SR_CONF_SAMPLERATE, | |
32 | SR_CONF_CAPTURE_RATIO, | |
33 | SR_CONF_LIMIT_SAMPLES, | |
34 | SR_CONF_RLE, | |
0aba65da UH |
35 | }; |
36 | ||
37 | /* Probes are numbered 0-31 (on the PCB silkscreen). */ | |
38 | SR_PRIV const char *ols_probe_names[NUM_PROBES + 1] = { | |
78693401 UH |
39 | "0", "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", |
40 | "13", "14", "15", "16", "17", "18", "19", "20", "21", "22", "23", | |
41 | "24", "25", "26", "27", "28", "29", "30", "31", | |
0aba65da UH |
42 | NULL, |
43 | }; | |
44 | ||
d3b38ad3 | 45 | /* Default supported samplerates, can be overridden by device metadata. */ |
e46aa4f6 BV |
46 | static const uint64_t samplerates[] = { |
47 | SR_HZ(10), | |
48 | SR_MHZ(200), | |
49 | SR_HZ(1), | |
0aba65da UH |
50 | }; |
51 | ||
52 | SR_PRIV struct sr_dev_driver ols_driver_info; | |
53 | static struct sr_dev_driver *di = &ols_driver_info; | |
54 | ||
55 | static int hw_init(struct sr_context *sr_ctx) | |
56 | { | |
063e7aef | 57 | return std_hw_init(sr_ctx, di, DRIVER_LOG_DOMAIN); |
0aba65da UH |
58 | } |
59 | ||
60 | static GSList *hw_scan(GSList *options) | |
61 | { | |
1987b8d6 | 62 | struct sr_config *src; |
0aba65da UH |
63 | struct sr_dev_inst *sdi; |
64 | struct drv_context *drvc; | |
65 | struct dev_context *devc; | |
66 | struct sr_probe *probe; | |
67 | struct sr_serial_dev_inst *serial; | |
68 | GPollFD probefd; | |
69 | GSList *l, *devices; | |
70 | int ret, i; | |
71 | const char *conn, *serialcomm; | |
72 | char buf[8]; | |
73 | ||
74 | (void)options; | |
4b97c74e | 75 | |
0aba65da | 76 | drvc = di->priv; |
4b97c74e | 77 | |
0aba65da UH |
78 | devices = NULL; |
79 | ||
80 | conn = serialcomm = NULL; | |
81 | for (l = options; l; l = l->next) { | |
1987b8d6 BV |
82 | src = l->data; |
83 | switch (src->key) { | |
1953564a | 84 | case SR_CONF_CONN: |
e46aa4f6 | 85 | conn = g_variant_get_string(src->data, NULL); |
0aba65da | 86 | break; |
1953564a | 87 | case SR_CONF_SERIALCOMM: |
e46aa4f6 | 88 | serialcomm = g_variant_get_string(src->data, NULL); |
0aba65da UH |
89 | break; |
90 | } | |
91 | } | |
92 | if (!conn) | |
93 | return NULL; | |
94 | ||
95 | if (serialcomm == NULL) | |
96 | serialcomm = SERIALCOMM; | |
97 | ||
98 | if (!(serial = sr_serial_dev_inst_new(conn, serialcomm))) | |
99 | return NULL; | |
100 | ||
101 | /* The discovery procedure is like this: first send the Reset | |
102 | * command (0x00) 5 times, since the device could be anywhere | |
103 | * in a 5-byte command. Then send the ID command (0x02). | |
104 | * If the device responds with 4 bytes ("OLS1" or "SLA1"), we | |
105 | * have a match. | |
106 | */ | |
107 | sr_info("Probing %s.", conn); | |
108 | if (serial_open(serial, SERIAL_RDWR | SERIAL_NONBLOCK) != SR_OK) | |
109 | return NULL; | |
110 | ||
111 | ret = SR_OK; | |
112 | for (i = 0; i < 5; i++) { | |
113 | if ((ret = send_shortcommand(serial, CMD_RESET)) != SR_OK) { | |
114 | sr_err("Port %s is not writable.", conn); | |
115 | break; | |
116 | } | |
117 | } | |
118 | if (ret != SR_OK) { | |
119 | serial_close(serial); | |
120 | sr_err("Could not use port %s. Quitting.", conn); | |
121 | return NULL; | |
122 | } | |
123 | send_shortcommand(serial, CMD_ID); | |
124 | ||
125 | /* Wait 10ms for a response. */ | |
126 | g_usleep(10000); | |
127 | ||
128 | probefd.fd = serial->fd; | |
129 | probefd.events = G_IO_IN; | |
130 | g_poll(&probefd, 1, 1); | |
131 | ||
132 | if (probefd.revents != G_IO_IN) | |
133 | return NULL; | |
134 | if (serial_read(serial, buf, 4) != 4) | |
135 | return NULL; | |
136 | if (strncmp(buf, "1SLO", 4) && strncmp(buf, "1ALS", 4)) | |
137 | return NULL; | |
138 | ||
139 | /* Definitely using the OLS protocol, check if it supports | |
140 | * the metadata command. | |
141 | */ | |
142 | send_shortcommand(serial, CMD_METADATA); | |
143 | if (g_poll(&probefd, 1, 10) > 0) { | |
144 | /* Got metadata. */ | |
145 | sdi = get_metadata(serial); | |
146 | sdi->index = 0; | |
147 | devc = sdi->priv; | |
148 | } else { | |
149 | /* Not an OLS -- some other board that uses the sump protocol. */ | |
150 | sdi = sr_dev_inst_new(0, SR_ST_INACTIVE, | |
151 | "Sump", "Logic Analyzer", "v1.0"); | |
152 | sdi->driver = di; | |
153 | devc = ols_dev_new(); | |
154 | for (i = 0; i < 32; i++) { | |
155 | if (!(probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE, | |
156 | ols_probe_names[i]))) | |
157 | return 0; | |
158 | sdi->probes = g_slist_append(sdi->probes, probe); | |
159 | } | |
160 | sdi->priv = devc; | |
161 | } | |
162 | devc->serial = serial; | |
163 | drvc->instances = g_slist_append(drvc->instances, sdi); | |
164 | devices = g_slist_append(devices, sdi); | |
165 | ||
166 | serial_close(serial); | |
167 | ||
168 | return devices; | |
169 | } | |
170 | ||
171 | static GSList *hw_dev_list(void) | |
172 | { | |
0e94d524 | 173 | return ((struct drv_context *)(di->priv))->instances; |
0aba65da UH |
174 | } |
175 | ||
176 | static int hw_dev_open(struct sr_dev_inst *sdi) | |
177 | { | |
178 | struct dev_context *devc; | |
179 | ||
180 | devc = sdi->priv; | |
181 | ||
182 | if (serial_open(devc->serial, SERIAL_RDWR) != SR_OK) | |
183 | return SR_ERR; | |
184 | ||
185 | sdi->status = SR_ST_ACTIVE; | |
186 | ||
187 | return SR_OK; | |
188 | } | |
189 | ||
190 | static int hw_dev_close(struct sr_dev_inst *sdi) | |
191 | { | |
192 | struct dev_context *devc; | |
193 | ||
194 | devc = sdi->priv; | |
195 | ||
196 | if (devc->serial && devc->serial->fd != -1) { | |
197 | serial_close(devc->serial); | |
198 | sdi->status = SR_ST_INACTIVE; | |
199 | } | |
200 | ||
201 | return SR_OK; | |
202 | } | |
203 | ||
204 | static int hw_cleanup(void) | |
205 | { | |
206 | GSList *l; | |
207 | struct sr_dev_inst *sdi; | |
208 | struct drv_context *drvc; | |
209 | struct dev_context *devc; | |
210 | int ret = SR_OK; | |
211 | ||
212 | if (!(drvc = di->priv)) | |
213 | return SR_OK; | |
214 | ||
215 | /* Properly close and free all devices. */ | |
216 | for (l = drvc->instances; l; l = l->next) { | |
217 | if (!(sdi = l->data)) { | |
218 | /* Log error, but continue cleaning up the rest. */ | |
219 | sr_err("%s: sdi was NULL, continuing", __func__); | |
220 | ret = SR_ERR_BUG; | |
221 | continue; | |
222 | } | |
223 | if (!(devc = sdi->priv)) { | |
224 | /* Log error, but continue cleaning up the rest. */ | |
225 | sr_err("%s: sdi->priv was NULL, continuing", __func__); | |
226 | ret = SR_ERR_BUG; | |
227 | continue; | |
228 | } | |
229 | hw_dev_close(sdi); | |
230 | sr_serial_dev_inst_free(devc->serial); | |
231 | sr_dev_inst_free(sdi); | |
232 | } | |
233 | g_slist_free(drvc->instances); | |
234 | drvc->instances = NULL; | |
235 | ||
236 | return ret; | |
237 | } | |
238 | ||
e46aa4f6 | 239 | static int config_get(int id, GVariant **data, const struct sr_dev_inst *sdi) |
0aba65da UH |
240 | { |
241 | struct dev_context *devc; | |
242 | ||
035a1078 | 243 | switch (id) { |
123e1313 | 244 | case SR_CONF_SAMPLERATE: |
0aba65da UH |
245 | if (sdi) { |
246 | devc = sdi->priv; | |
e46aa4f6 | 247 | *data = g_variant_new_uint64(devc->cur_samplerate); |
0aba65da UH |
248 | } else |
249 | return SR_ERR; | |
250 | break; | |
251 | default: | |
252 | return SR_ERR_ARG; | |
253 | } | |
254 | ||
255 | return SR_OK; | |
256 | } | |
257 | ||
e46aa4f6 | 258 | static int config_set(int id, GVariant *data, const struct sr_dev_inst *sdi) |
0aba65da UH |
259 | { |
260 | struct dev_context *devc; | |
261 | int ret; | |
e46aa4f6 | 262 | uint64_t tmp_u64; |
0aba65da UH |
263 | |
264 | devc = sdi->priv; | |
265 | ||
266 | if (sdi->status != SR_ST_ACTIVE) | |
267 | return SR_ERR; | |
268 | ||
035a1078 | 269 | switch (id) { |
1953564a | 270 | case SR_CONF_SAMPLERATE: |
e46aa4f6 BV |
271 | tmp_u64 = g_variant_get_uint64(data); |
272 | if (tmp_u64 < samplerates[0] || tmp_u64 > samplerates[1]) | |
273 | return SR_ERR_SAMPLERATE; | |
274 | ret = ols_set_samplerate(sdi, g_variant_get_uint64(data)); | |
0aba65da | 275 | break; |
1953564a | 276 | case SR_CONF_LIMIT_SAMPLES: |
e46aa4f6 BV |
277 | tmp_u64 = g_variant_get_uint64(data); |
278 | if (tmp_u64 < MIN_NUM_SAMPLES) | |
0aba65da | 279 | return SR_ERR; |
e46aa4f6 | 280 | if (tmp_u64 > devc->max_samples) |
0aba65da | 281 | sr_err("Sample limit exceeds hardware maximum."); |
e46aa4f6 | 282 | devc->limit_samples = tmp_u64; |
0aba65da UH |
283 | sr_info("Sample limit is %" PRIu64 ".", devc->limit_samples); |
284 | ret = SR_OK; | |
285 | break; | |
1953564a | 286 | case SR_CONF_CAPTURE_RATIO: |
e46aa4f6 | 287 | devc->capture_ratio = g_variant_get_uint64(data); |
0aba65da UH |
288 | if (devc->capture_ratio < 0 || devc->capture_ratio > 100) { |
289 | devc->capture_ratio = 0; | |
290 | ret = SR_ERR; | |
291 | } else | |
292 | ret = SR_OK; | |
293 | break; | |
1953564a | 294 | case SR_CONF_RLE: |
e46aa4f6 | 295 | if (g_variant_get_boolean(data)) { |
0aba65da UH |
296 | sr_info("Enabling RLE."); |
297 | devc->flag_reg |= FLAG_RLE; | |
aeea0572 BV |
298 | } else { |
299 | sr_info("Disabling RLE."); | |
300 | devc->flag_reg &= ~FLAG_RLE; | |
0aba65da UH |
301 | } |
302 | ret = SR_OK; | |
303 | break; | |
304 | default: | |
305 | ret = SR_ERR; | |
306 | } | |
307 | ||
308 | return ret; | |
309 | } | |
310 | ||
e46aa4f6 | 311 | static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi) |
a1c743fc | 312 | { |
e46aa4f6 BV |
313 | GVariant *gvar; |
314 | GVariantBuilder gvb; | |
a1c743fc BV |
315 | |
316 | (void)sdi; | |
317 | ||
318 | switch (key) { | |
0d485e30 | 319 | case SR_CONF_SCAN_OPTIONS: |
e46aa4f6 BV |
320 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, |
321 | hwopts, ARRAY_SIZE(hwopts), sizeof(int32_t)); | |
0d485e30 | 322 | break; |
9a6517d1 | 323 | case SR_CONF_DEVICE_OPTIONS: |
e46aa4f6 BV |
324 | *data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, |
325 | hwcaps, ARRAY_SIZE(hwcaps), sizeof(int32_t)); | |
9a6517d1 | 326 | break; |
a1c743fc | 327 | case SR_CONF_SAMPLERATE: |
e46aa4f6 BV |
328 | g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}")); |
329 | gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"), samplerates, | |
330 | ARRAY_SIZE(samplerates), sizeof(uint64_t)); | |
331 | g_variant_builder_add(&gvb, "{sv}", "samplerate-steps", gvar); | |
332 | *data = g_variant_builder_end(&gvb); | |
a1c743fc | 333 | break; |
c50277a6 | 334 | case SR_CONF_TRIGGER_TYPE: |
e46aa4f6 | 335 | *data = g_variant_new_string(TRIGGER_TYPE); |
c50277a6 | 336 | break; |
a1c743fc BV |
337 | default: |
338 | return SR_ERR_ARG; | |
339 | } | |
340 | ||
341 | return SR_OK; | |
342 | } | |
343 | ||
0aba65da UH |
344 | static int hw_dev_acquisition_start(const struct sr_dev_inst *sdi, |
345 | void *cb_data) | |
346 | { | |
0aba65da UH |
347 | struct dev_context *devc; |
348 | uint32_t trigger_config[4]; | |
349 | uint32_t data; | |
350 | uint16_t readcount, delaycount; | |
351 | uint8_t changrp_mask; | |
352 | int num_channels; | |
353 | int i; | |
354 | ||
355 | devc = sdi->priv; | |
356 | ||
357 | if (sdi->status != SR_ST_ACTIVE) | |
358 | return SR_ERR; | |
359 | ||
360 | if (ols_configure_probes(sdi) != SR_OK) { | |
361 | sr_err("Failed to configure probes."); | |
362 | return SR_ERR; | |
363 | } | |
364 | ||
365 | /* | |
366 | * Enable/disable channel groups in the flag register according to the | |
367 | * probe mask. Calculate this here, because num_channels is needed | |
368 | * to limit readcount. | |
369 | */ | |
370 | changrp_mask = 0; | |
371 | num_channels = 0; | |
372 | for (i = 0; i < 4; i++) { | |
373 | if (devc->probe_mask & (0xff << (i * 8))) { | |
374 | changrp_mask |= (1 << i); | |
375 | num_channels++; | |
376 | } | |
377 | } | |
378 | ||
379 | /* | |
380 | * Limit readcount to prevent reading past the end of the hardware | |
381 | * buffer. | |
382 | */ | |
383 | readcount = MIN(devc->max_samples / num_channels, devc->limit_samples) / 4; | |
384 | ||
385 | memset(trigger_config, 0, 16); | |
386 | trigger_config[devc->num_stages - 1] |= 0x08; | |
387 | if (devc->trigger_mask[0]) { | |
388 | delaycount = readcount * (1 - devc->capture_ratio / 100.0); | |
389 | devc->trigger_at = (readcount - delaycount) * 4 - devc->num_stages; | |
390 | ||
391 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_0, | |
392 | reverse32(devc->trigger_mask[0])) != SR_OK) | |
393 | return SR_ERR; | |
394 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_0, | |
395 | reverse32(devc->trigger_value[0])) != SR_OK) | |
396 | return SR_ERR; | |
397 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_0, | |
398 | trigger_config[0]) != SR_OK) | |
399 | return SR_ERR; | |
400 | ||
401 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_1, | |
402 | reverse32(devc->trigger_mask[1])) != SR_OK) | |
403 | return SR_ERR; | |
404 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_1, | |
405 | reverse32(devc->trigger_value[1])) != SR_OK) | |
406 | return SR_ERR; | |
407 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_1, | |
408 | trigger_config[1]) != SR_OK) | |
409 | return SR_ERR; | |
410 | ||
411 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_2, | |
412 | reverse32(devc->trigger_mask[2])) != SR_OK) | |
413 | return SR_ERR; | |
414 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_2, | |
415 | reverse32(devc->trigger_value[2])) != SR_OK) | |
416 | return SR_ERR; | |
417 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_2, | |
418 | trigger_config[2]) != SR_OK) | |
419 | return SR_ERR; | |
420 | ||
421 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_3, | |
422 | reverse32(devc->trigger_mask[3])) != SR_OK) | |
423 | return SR_ERR; | |
424 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_3, | |
425 | reverse32(devc->trigger_value[3])) != SR_OK) | |
426 | return SR_ERR; | |
427 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_3, | |
428 | trigger_config[3]) != SR_OK) | |
429 | return SR_ERR; | |
430 | } else { | |
431 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_MASK_0, | |
432 | devc->trigger_mask[0]) != SR_OK) | |
433 | return SR_ERR; | |
434 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_VALUE_0, | |
435 | devc->trigger_value[0]) != SR_OK) | |
436 | return SR_ERR; | |
437 | if (send_longcommand(devc->serial, CMD_SET_TRIGGER_CONFIG_0, | |
438 | 0x00000008) != SR_OK) | |
439 | return SR_ERR; | |
440 | delaycount = readcount; | |
441 | } | |
442 | ||
443 | sr_info("Setting samplerate to %" PRIu64 "Hz (divider %u, " | |
444 | "demux %s)", devc->cur_samplerate, devc->cur_samplerate_divider, | |
445 | devc->flag_reg & FLAG_DEMUX ? "on" : "off"); | |
446 | if (send_longcommand(devc->serial, CMD_SET_DIVIDER, | |
447 | reverse32(devc->cur_samplerate_divider)) != SR_OK) | |
448 | return SR_ERR; | |
449 | ||
450 | /* Send sample limit and pre/post-trigger capture ratio. */ | |
451 | data = ((readcount - 1) & 0xffff) << 16; | |
452 | data |= (delaycount - 1) & 0xffff; | |
453 | if (send_longcommand(devc->serial, CMD_CAPTURE_SIZE, reverse16(data)) != SR_OK) | |
454 | return SR_ERR; | |
455 | ||
456 | /* The flag register wants them here, and 1 means "disable channel". */ | |
457 | devc->flag_reg |= ~(changrp_mask << 2) & 0x3c; | |
458 | devc->flag_reg |= FLAG_FILTER; | |
459 | devc->rle_count = 0; | |
460 | data = (devc->flag_reg << 24) | ((devc->flag_reg << 8) & 0xff0000); | |
461 | if (send_longcommand(devc->serial, CMD_SET_FLAGS, data) != SR_OK) | |
462 | return SR_ERR; | |
463 | ||
464 | /* Start acquisition on the device. */ | |
465 | if (send_shortcommand(devc->serial, CMD_RUN) != SR_OK) | |
466 | return SR_ERR; | |
467 | ||
4afdfd46 UH |
468 | /* Send header packet to the session bus. */ |
469 | std_session_send_df_header(cb_data, DRIVER_LOG_DOMAIN); | |
470 | ||
0aba65da UH |
471 | sr_source_add(devc->serial->fd, G_IO_IN, -1, ols_receive_data, |
472 | cb_data); | |
473 | ||
0aba65da UH |
474 | return SR_OK; |
475 | } | |
476 | ||
477 | /* TODO: This stops acquisition on ALL devices, ignoring dev_index. */ | |
478 | static int hw_dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data) | |
479 | { | |
480 | /* Avoid compiler warnings. */ | |
481 | (void)cb_data; | |
482 | ||
483 | abort_acquisition(sdi); | |
484 | ||
485 | return SR_OK; | |
486 | } | |
487 | ||
488 | SR_PRIV struct sr_dev_driver ols_driver_info = { | |
489 | .name = "ols", | |
490 | .longname = "Openbench Logic Sniffer", | |
491 | .api_version = 1, | |
492 | .init = hw_init, | |
493 | .cleanup = hw_cleanup, | |
494 | .scan = hw_scan, | |
495 | .dev_list = hw_dev_list, | |
496 | .dev_clear = hw_cleanup, | |
035a1078 BV |
497 | .config_get = config_get, |
498 | .config_set = config_set, | |
a1c743fc | 499 | .config_list = config_list, |
0aba65da UH |
500 | .dev_open = hw_dev_open, |
501 | .dev_close = hw_dev_close, | |
0aba65da UH |
502 | .dev_acquisition_start = hw_dev_acquisition_start, |
503 | .dev_acquisition_stop = hw_dev_acquisition_stop, | |
504 | .priv = NULL, | |
505 | }; |