]>
Commit | Line | Data |
---|---|---|
16e76bae MS |
1 | /* |
2 | * This file is part of the libsigrok project. | |
3 | * | |
4 | * Copyright (C) 2013 Marc Schink <sigrok-dev@marcschink.de> | |
5 | * | |
6 | * This program is free software: you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation, either version 3 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program. If not, see <http://www.gnu.org/licenses/>. | |
18 | */ | |
19 | ||
20 | #ifndef LIBSIGROK_HARDWARE_IKALOGIC_SCANALOGIC2_PROTOCOL_H | |
21 | #define LIBSIGROK_HARDWARE_IKALOGIC_SCANALOGIC2_PROTOCOL_H | |
22 | ||
e52e712d MS |
23 | #include <stdlib.h> |
24 | #include <string.h> | |
16e76bae MS |
25 | #include <stdint.h> |
26 | #include <glib.h> | |
27 | #include "libsigrok.h" | |
28 | #include "libsigrok-internal.h" | |
29 | ||
3544f848 | 30 | #define LOG_PREFIX "ikalogic-scanalogic2" |
16e76bae | 31 | |
e52e712d MS |
32 | #define VENDOR_NAME "IKALOGIC" |
33 | #define MODEL_NAME "Scanalogic-2" | |
34 | ||
35 | #define USB_VID_PID "20a0.4123" | |
36 | #define USB_INTERFACE 0 | |
37 | #define USB_TIMEOUT 5000 | |
38 | ||
39 | #define USB_REQUEST_TYPE_IN (LIBUSB_REQUEST_TYPE_CLASS | \ | |
40 | LIBUSB_RECIPIENT_INTERFACE | LIBUSB_ENDPOINT_IN) | |
41 | ||
42 | #define USB_REQUEST_TYPE_OUT (LIBUSB_REQUEST_TYPE_CLASS | \ | |
43 | LIBUSB_RECIPIENT_INTERFACE | LIBUSB_ENDPOINT_OUT) | |
44 | ||
fb8d593c | 45 | #define USB_HID_GET_REPORT 0x01 |
e52e712d MS |
46 | #define USB_HID_SET_REPORT 0x09 |
47 | #define USB_HID_REPORT_TYPE_FEATURE 0x300 | |
48 | ||
49 | #define NUM_SAMPLERATES 11 | |
50 | #define NUM_PROBES 4 | |
51 | ||
52 | #define TRIGGER_TYPES "rfc" | |
53 | ||
54 | /* | |
55 | * Number of sample bytes and samples the device can acquire. Note that the | |
56 | * vendor software can acquire 32736 sample bytes only but the device is capable | |
57 | * to acquire up to 32766 sample bytes. | |
58 | */ | |
59 | #define MAX_DEV_SAMPLE_BYTES 32766 | |
60 | #define MAX_DEV_SAMPLES (MAX_INT_SAMPLE_BYTES * 8) | |
61 | ||
62 | /* Number of sample bytes and samples the driver can acquire. */ | |
63 | #define MAX_SAMPLE_BYTES (MAX_DEV_SAMPLE_BYTES - 1) | |
64 | #define MAX_SAMPLES (MAX_SAMPLE_BYTES * 8) | |
65 | ||
66 | /* Maximum time that the trigger can be delayed in milliseconds. */ | |
67 | #define MAX_AFTER_TRIGGER_DELAY 65000 | |
68 | ||
69 | #define PACKET_LENGTH 128 | |
70 | ||
71 | /* Number of sample bytes per packet where a sample byte contains 8 samples. */ | |
72 | #define PACKET_NUM_SAMPLE_BYTES 124 | |
73 | ||
74 | /* Number of samples per packet. */ | |
75 | #define PACKET_NUM_SAMPLES (PACKET_NUM_SAMPLE_BYTES * 8) | |
76 | ||
77 | #define DEFAULT_SAMPLERATE SR_KHZ(1.25) | |
78 | ||
79 | /* | |
80 | * Time interval between the last status of available data received and the | |
81 | * moment when the next status request will be sent in microseconds. | |
82 | */ | |
83 | #define WAIT_DATA_READY_INTERVAL 1500000 | |
84 | ||
85 | #define CMD_SAMPLE 0x01 | |
86 | #define CMD_RESET 0x02 | |
87 | #define CMD_IDLE 0x07 | |
88 | #define CMD_INFO 0x0a | |
89 | ||
90 | #define TRIGGER_CHANNEL_ALL 0x00 | |
91 | #define TRIGGER_CHANNEL_0 0x01 | |
92 | #define TRIGGER_CHANNEL_1 0x02 | |
93 | #define TRIGGER_CHANNEL_2 0x03 | |
94 | ||
95 | #define TRIGGER_TYPE_NEGEDGE 0x00 | |
96 | #define TRIGGER_TYPE_POSEDGE 0x01 | |
97 | #define TRIGGER_TYPE_ANYEDGE 0x02 | |
98 | #define TRIGGER_TYPE_NONE 0x03 | |
99 | ||
100 | #define STATUS_DATA_READY 0x60 | |
101 | #define STATUS_WAITING_FOR_TRIGGER 0x61 | |
102 | #define STATUS_SAMPLING 0x62 | |
103 | #define STATUS_DEVICE_READY 0x63 | |
104 | ||
105 | struct device_info { | |
106 | /* Serial number of the device. */ | |
107 | uint32_t serial; | |
108 | ||
109 | /* Major version of the firmware. */ | |
110 | uint8_t fw_ver_major; | |
111 | ||
112 | /* Minor version of the firmware. */ | |
113 | uint8_t fw_ver_minor; | |
114 | }; | |
115 | ||
116 | enum { | |
117 | STATE_IDLE = 0, | |
118 | STATE_SAMPLE, | |
119 | STATE_WAIT_DATA_READY, | |
120 | STATE_RECEIVE_DATA, | |
121 | STATE_RESET_AND_IDLE, | |
122 | STATE_WAIT_DEVICE_READY | |
123 | }; | |
124 | ||
16e76bae MS |
125 | /** Private, per-device-instance driver context. */ |
126 | struct dev_context { | |
e52e712d MS |
127 | /* Current selected samplerate. */ |
128 | uint64_t samplerate; | |
129 | ||
130 | /* Device specific identifier for the current samplerate. */ | |
131 | uint8_t samplerate_id; | |
132 | ||
133 | /* Current sampling limit. */ | |
134 | uint64_t limit_samples; | |
135 | ||
136 | /* Calculated number of pre-trigger samples. */ | |
137 | uint64_t pre_trigger_samples; | |
138 | ||
139 | /* Number of pre- and post-trigger sample bytes to acquire. */ | |
140 | uint16_t pre_trigger_bytes; | |
141 | uint16_t post_trigger_bytes; | |
142 | ||
143 | /* Device specific settings for the trigger. */ | |
144 | uint8_t trigger_channel; | |
145 | uint8_t trigger_type; | |
146 | ||
147 | unsigned int capture_ratio; | |
148 | ||
149 | /* Time that the trigger will be delayed in milliseconds. */ | |
150 | uint16_t after_trigger_delay; | |
151 | ||
152 | void *cb_data; | |
153 | ||
ba7dd8bb UH |
154 | /* Array to provide an index based access to all channels. */ |
155 | const struct sr_channel *channels[NUM_PROBES]; | |
e52e712d | 156 | |
e52e712d MS |
157 | struct libusb_transfer *xfer_in, *xfer_out; |
158 | ||
159 | /* | |
160 | * Buffer to store setup and payload data for incoming and outgoing | |
161 | * transfers. | |
162 | */ | |
163 | uint8_t xfer_buf_in[LIBUSB_CONTROL_SETUP_SIZE + PACKET_LENGTH]; | |
164 | uint8_t xfer_buf_out[LIBUSB_CONTROL_SETUP_SIZE + PACKET_LENGTH]; | |
165 | ||
166 | /* Pointers to the payload of incoming and outgoing transfers. */ | |
167 | uint8_t *xfer_data_in, *xfer_data_out; | |
168 | ||
169 | /* Current state of the state machine */ | |
170 | unsigned int state; | |
171 | ||
172 | /* Next state of the state machine. */ | |
173 | unsigned int next_state; | |
174 | ||
175 | /* | |
176 | * Locking variable to ensure that no status about available data will | |
177 | * be requested until the last status was received. | |
178 | */ | |
179 | gboolean wait_data_ready_locked; | |
180 | ||
181 | /* | |
182 | * Time when the last response about the status of available data was | |
183 | * received. | |
184 | */ | |
185 | int64_t wait_data_ready_time; | |
186 | ||
187 | /* | |
188 | * Indicates that stopping of the acquisition is currently in progress. | |
189 | */ | |
190 | gboolean stopping_in_progress; | |
191 | ||
192 | /* | |
193 | * Buffer which contains the samples received from the device for each | |
194 | * channel except the last one. The samples of the last channel will be | |
195 | * processed directly after they will be received. | |
196 | */ | |
197 | uint8_t sample_buffer[NUM_PROBES - 1][MAX_DEV_SAMPLE_BYTES]; | |
198 | ||
199 | /* Expected number of sample packets for each channel. */ | |
200 | uint16_t num_sample_packets; | |
201 | ||
202 | /* Number of samples already processed. */ | |
203 | uint64_t samples_processed; | |
204 | ||
205 | /* Sample packet number that is currently processed. */ | |
206 | uint16_t sample_packet; | |
16e76bae | 207 | |
e52e712d MS |
208 | /* Channel number that is currently processed. */ |
209 | uint8_t channel; | |
16e76bae | 210 | |
ba7dd8bb UH |
211 | /* Number of enabled channels. */ |
212 | unsigned int num_enabled_channels; | |
16e76bae | 213 | |
ba7dd8bb UH |
214 | /* Array to provide a sequential access to all enabled channel indices. */ |
215 | uint8_t channel_map[NUM_PROBES]; | |
16e76bae | 216 | |
e52e712d MS |
217 | /* Indicates whether a transfer failed. */ |
218 | gboolean transfer_error; | |
16e76bae MS |
219 | }; |
220 | ||
79914b3a UH |
221 | SR_PRIV int ikalogic_scanalogic2_receive_data(int fd, int revents, void *cb_data); |
222 | SR_PRIV void sl2_receive_transfer_in(struct libusb_transfer *transfer); | |
223 | SR_PRIV void sl2_receive_transfer_out(struct libusb_transfer *transfer); | |
224 | SR_PRIV int sl2_set_samplerate(const struct sr_dev_inst *sdi, | |
e52e712d | 225 | uint64_t samplerate); |
79914b3a UH |
226 | SR_PRIV int sl2_set_limit_samples(const struct sr_dev_inst *sdi, |
227 | uint64_t limit_samples); | |
228 | SR_PRIV void sl2_configure_trigger(const struct sr_dev_inst *sdi); | |
229 | SR_PRIV int sl2_set_capture_ratio(const struct sr_dev_inst *sdi, | |
230 | uint64_t capture_ratio); | |
231 | SR_PRIV int sl2_set_after_trigger_delay(const struct sr_dev_inst *sdi, | |
232 | uint64_t after_trigger_delay); | |
233 | SR_PRIV void sl2_calculate_trigger_samples(const struct sr_dev_inst *sdi); | |
234 | SR_PRIV int sl2_get_device_info(struct sr_usb_dev_inst usb, | |
e52e712d | 235 | struct device_info *dev_info); |
79914b3a UH |
236 | SR_PRIV int sl2_transfer_in(libusb_device_handle *dev_handle, uint8_t *data); |
237 | SR_PRIV int sl2_transfer_out(libusb_device_handle *dev_handle, uint8_t *data); | |
16e76bae MS |
238 | |
239 | #endif |