]>
Commit | Line | Data |
---|---|---|
b908f067 | 1 | /* |
50985c20 | 2 | * This file is part of the libsigrok project. |
b908f067 UH |
3 | * |
4 | * Copyright (C) 2011-2012 Uwe Hermann <uwe@hermann-uwe.de> | |
5 | * | |
6 | * This program is free software; you can redistribute it and/or modify | |
7 | * it under the terms of the GNU General Public License as published by | |
8 | * the Free Software Foundation; either version 2 of the License, or | |
9 | * (at your option) any later version. | |
10 | * | |
11 | * This program is distributed in the hope that it will be useful, | |
12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
14 | * GNU General Public License for more details. | |
15 | * | |
16 | * You should have received a copy of the GNU General Public License | |
17 | * along with this program; if not, write to the Free Software | |
18 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
19 | */ | |
20 | ||
21 | #include <ftdi.h> | |
22 | #include <glib.h> | |
45c59c8b BV |
23 | #include "libsigrok.h" |
24 | #include "libsigrok-internal.h" | |
45e080b6 | 25 | #include "protocol.h" |
b908f067 UH |
26 | |
27 | /* Probes are numbered 0-7. */ | |
1bec72d2 | 28 | SR_PRIV const char *chronovu_la8_probe_names[NUM_PROBES + 1] = { |
78693401 | 29 | "0", "1", "2", "3", "4", "5", "6", "7", |
b908f067 UH |
30 | NULL, |
31 | }; | |
32 | ||
b908f067 UH |
33 | SR_PRIV void fill_supported_samplerates_if_needed(void) |
34 | { | |
35 | int i; | |
36 | ||
1bec72d2 | 37 | if (chronovu_la8_samplerates[0] != 0) |
b908f067 UH |
38 | return; |
39 | ||
b908f067 | 40 | for (i = 0; i < 255; i++) |
1bec72d2 | 41 | chronovu_la8_samplerates[254 - i] = SR_MHZ(100) / (i + 1); |
b908f067 UH |
42 | } |
43 | ||
44 | /** | |
45 | * Check if the given samplerate is supported by the LA8 hardware. | |
46 | * | |
47 | * @param samplerate The samplerate (in Hz) to check. | |
48 | * @return 1 if the samplerate is supported/valid, 0 otherwise. | |
49 | */ | |
50 | SR_PRIV int is_valid_samplerate(uint64_t samplerate) | |
51 | { | |
52 | int i; | |
53 | ||
54 | fill_supported_samplerates_if_needed(); | |
55 | ||
56 | for (i = 0; i < 255; i++) { | |
1bec72d2 | 57 | if (chronovu_la8_samplerates[i] == samplerate) |
b908f067 UH |
58 | return 1; |
59 | } | |
60 | ||
f3a35908 | 61 | sr_err("Invalid samplerate (%" PRIu64 "Hz).", samplerate); |
b908f067 UH |
62 | |
63 | return 0; | |
64 | } | |
65 | ||
66 | /** | |
67 | * Convert a samplerate (in Hz) to the 'divcount' value the LA8 wants. | |
68 | * | |
69 | * LA8 hardware: sample period = (divcount + 1) * 10ns. | |
70 | * Min. value for divcount: 0x00 (10ns sample period, 100MHz samplerate). | |
71 | * Max. value for divcount: 0xfe (2550ns sample period, 392.15kHz samplerate). | |
72 | * | |
73 | * @param samplerate The samplerate in Hz. | |
74 | * @return The divcount value as needed by the hardware, or 0xff upon errors. | |
75 | */ | |
76 | SR_PRIV uint8_t samplerate_to_divcount(uint64_t samplerate) | |
77 | { | |
78 | if (samplerate == 0) { | |
f3a35908 | 79 | sr_err("%s: samplerate was 0.", __func__); |
b908f067 UH |
80 | return 0xff; |
81 | } | |
82 | ||
83 | if (!is_valid_samplerate(samplerate)) { | |
f3a35908 | 84 | sr_err("%s: Can't get divcount, samplerate invalid.", __func__); |
b908f067 UH |
85 | return 0xff; |
86 | } | |
87 | ||
88 | return (SR_MHZ(100) / samplerate) - 1; | |
89 | } | |
90 | ||
91 | /** | |
92 | * Write data of a certain length to the LA8's FTDI device. | |
93 | * | |
1644fb24 BV |
94 | * @param devc The struct containing private per-device-instance data. Must not |
95 | * be NULL. devc->ftdic must not be NULL either. | |
b908f067 UH |
96 | * @param buf The buffer containing the data to write. Must not be NULL. |
97 | * @param size The number of bytes to write. Must be >= 0. | |
98 | * @return The number of bytes written, or a negative value upon errors. | |
99 | */ | |
1644fb24 | 100 | SR_PRIV int la8_write(struct dev_context *devc, uint8_t *buf, int size) |
b908f067 UH |
101 | { |
102 | int bytes_written; | |
103 | ||
1644fb24 | 104 | /* Note: Caller checked that devc and devc->ftdic != NULL. */ |
b908f067 UH |
105 | |
106 | if (!buf) { | |
f3a35908 | 107 | sr_err("%s: buf was NULL.", __func__); |
b908f067 UH |
108 | return SR_ERR_ARG; |
109 | } | |
110 | ||
111 | if (size < 0) { | |
f3a35908 | 112 | sr_err("%s: size was < 0.", __func__); |
b908f067 UH |
113 | return SR_ERR_ARG; |
114 | } | |
115 | ||
1644fb24 | 116 | bytes_written = ftdi_write_data(devc->ftdic, buf, size); |
b908f067 UH |
117 | |
118 | if (bytes_written < 0) { | |
f3a35908 | 119 | sr_err("%s: ftdi_write_data: (%d) %s.", __func__, |
1644fb24 BV |
120 | bytes_written, ftdi_get_error_string(devc->ftdic)); |
121 | (void) la8_close_usb_reset_sequencer(devc); /* Ignore errors. */ | |
b908f067 | 122 | } else if (bytes_written != size) { |
f3a35908 | 123 | sr_err("%s: bytes to write: %d, bytes written: %d.", |
b908f067 | 124 | __func__, size, bytes_written); |
1644fb24 | 125 | (void) la8_close_usb_reset_sequencer(devc); /* Ignore errors. */ |
b908f067 UH |
126 | } |
127 | ||
128 | return bytes_written; | |
129 | } | |
130 | ||
131 | /** | |
132 | * Read a certain amount of bytes from the LA8's FTDI device. | |
133 | * | |
1644fb24 BV |
134 | * @param devc The struct containing private per-device-instance data. Must not |
135 | * be NULL. devc->ftdic must not be NULL either. | |
b908f067 UH |
136 | * @param buf The buffer where the received data will be stored. Must not |
137 | * be NULL. | |
138 | * @param size The number of bytes to read. Must be >= 1. | |
139 | * @return The number of bytes read, or a negative value upon errors. | |
140 | */ | |
1644fb24 | 141 | SR_PRIV int la8_read(struct dev_context *devc, uint8_t *buf, int size) |
b908f067 UH |
142 | { |
143 | int bytes_read; | |
144 | ||
1644fb24 | 145 | /* Note: Caller checked that devc and devc->ftdic != NULL. */ |
b908f067 UH |
146 | |
147 | if (!buf) { | |
f3a35908 | 148 | sr_err("%s: buf was NULL.", __func__); |
b908f067 UH |
149 | return SR_ERR_ARG; |
150 | } | |
151 | ||
152 | if (size <= 0) { | |
f3a35908 | 153 | sr_err("%s: size was <= 0.", __func__); |
b908f067 UH |
154 | return SR_ERR_ARG; |
155 | } | |
156 | ||
1644fb24 | 157 | bytes_read = ftdi_read_data(devc->ftdic, buf, size); |
b908f067 UH |
158 | |
159 | if (bytes_read < 0) { | |
f3a35908 | 160 | sr_err("%s: ftdi_read_data: (%d) %s.", __func__, |
1644fb24 | 161 | bytes_read, ftdi_get_error_string(devc->ftdic)); |
b908f067 | 162 | } else if (bytes_read != size) { |
f3a35908 | 163 | // sr_err("%s: Bytes to read: %d, bytes read: %d.", |
b908f067 UH |
164 | // __func__, size, bytes_read); |
165 | } | |
166 | ||
167 | return bytes_read; | |
168 | } | |
169 | ||
1644fb24 | 170 | SR_PRIV int la8_close(struct dev_context *devc) |
b908f067 UH |
171 | { |
172 | int ret; | |
173 | ||
1644fb24 | 174 | if (!devc) { |
f3a35908 | 175 | sr_err("%s: devc was NULL.", __func__); |
b908f067 UH |
176 | return SR_ERR_ARG; |
177 | } | |
178 | ||
1644fb24 | 179 | if (!devc->ftdic) { |
f3a35908 | 180 | sr_err("%s: devc->ftdic was NULL.", __func__); |
b908f067 UH |
181 | return SR_ERR_ARG; |
182 | } | |
183 | ||
1644fb24 | 184 | if ((ret = ftdi_usb_close(devc->ftdic)) < 0) { |
f3a35908 | 185 | sr_err("%s: ftdi_usb_close: (%d) %s.", |
1644fb24 | 186 | __func__, ret, ftdi_get_error_string(devc->ftdic)); |
b908f067 UH |
187 | } |
188 | ||
189 | return ret; | |
190 | } | |
191 | ||
192 | /** | |
193 | * Close the ChronoVu LA8 USB port and reset the LA8 sequencer logic. | |
194 | * | |
1644fb24 | 195 | * @param devc The struct containing private per-device-instance data. |
b908f067 UH |
196 | * @return SR_OK upon success, SR_ERR_ARG upon invalid arguments. |
197 | */ | |
1644fb24 | 198 | SR_PRIV int la8_close_usb_reset_sequencer(struct dev_context *devc) |
b908f067 UH |
199 | { |
200 | /* Magic sequence of bytes for resetting the LA8 sequencer logic. */ | |
201 | uint8_t buf[8] = {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01}; | |
202 | int ret; | |
203 | ||
1644fb24 | 204 | if (!devc) { |
f3a35908 | 205 | sr_err("%s: devc was NULL.", __func__); |
b908f067 UH |
206 | return SR_ERR_ARG; |
207 | } | |
208 | ||
1644fb24 | 209 | if (!devc->ftdic) { |
f3a35908 | 210 | sr_err("%s: devc->ftdic was NULL.", __func__); |
b908f067 UH |
211 | return SR_ERR_ARG; |
212 | } | |
213 | ||
1644fb24 | 214 | if (devc->ftdic->usb_dev) { |
b908f067 | 215 | /* Reset the LA8 sequencer logic, then wait 100ms. */ |
f3a35908 | 216 | sr_dbg("Resetting sequencer logic."); |
1644fb24 | 217 | (void) la8_write(devc, buf, 8); /* Ignore errors. */ |
b908f067 UH |
218 | g_usleep(100 * 1000); |
219 | ||
220 | /* Purge FTDI buffers, then reset and close the FTDI device. */ | |
f3a35908 | 221 | sr_dbg("Purging buffers, resetting+closing FTDI device."); |
b908f067 UH |
222 | |
223 | /* Log errors, but ignore them (i.e., don't abort). */ | |
1644fb24 | 224 | if ((ret = ftdi_usb_purge_buffers(devc->ftdic)) < 0) |
f3a35908 | 225 | sr_err("%s: ftdi_usb_purge_buffers: (%d) %s.", |
1644fb24 BV |
226 | __func__, ret, ftdi_get_error_string(devc->ftdic)); |
227 | if ((ret = ftdi_usb_reset(devc->ftdic)) < 0) | |
f3a35908 | 228 | sr_err("%s: ftdi_usb_reset: (%d) %s.", __func__, |
1644fb24 BV |
229 | ret, ftdi_get_error_string(devc->ftdic)); |
230 | if ((ret = ftdi_usb_close(devc->ftdic)) < 0) | |
f3a35908 | 231 | sr_err("%s: ftdi_usb_close: (%d) %s.", __func__, |
1644fb24 | 232 | ret, ftdi_get_error_string(devc->ftdic)); |
b908f067 UH |
233 | } |
234 | ||
235 | /* Close USB device, deinitialize and free the FTDI context. */ | |
1644fb24 BV |
236 | ftdi_free(devc->ftdic); /* Returns void. */ |
237 | devc->ftdic = NULL; | |
b908f067 UH |
238 | |
239 | return SR_OK; | |
240 | } | |
241 | ||
242 | /** | |
243 | * Reset the ChronoVu LA8. | |
244 | * | |
245 | * The LA8 must be reset after a failed read/write operation or upon timeouts. | |
246 | * | |
1644fb24 | 247 | * @param devc The struct containing private per-device-instance data. |
b908f067 UH |
248 | * @return SR_OK upon success, SR_ERR upon failure. |
249 | */ | |
1644fb24 | 250 | SR_PRIV int la8_reset(struct dev_context *devc) |
b908f067 UH |
251 | { |
252 | uint8_t buf[BS]; | |
253 | time_t done, now; | |
254 | int bytes_read; | |
255 | ||
1644fb24 | 256 | if (!devc) { |
f3a35908 | 257 | sr_err("%s: devc was NULL.", __func__); |
b908f067 UH |
258 | return SR_ERR_ARG; |
259 | } | |
260 | ||
1644fb24 | 261 | if (!devc->ftdic) { |
f3a35908 | 262 | sr_err("%s: devc->ftdic was NULL.", __func__); |
b908f067 UH |
263 | return SR_ERR_ARG; |
264 | } | |
265 | ||
f3a35908 | 266 | sr_dbg("Resetting the device."); |
b908f067 UH |
267 | |
268 | /* | |
269 | * Purge pending read data from the FTDI hardware FIFO until | |
270 | * no more data is left, or a timeout occurs (after 20s). | |
271 | */ | |
272 | done = 20 + time(NULL); | |
273 | do { | |
274 | /* TODO: Ignore errors? Check for < 0 at least! */ | |
1644fb24 | 275 | bytes_read = la8_read(devc, (uint8_t *)&buf, BS); |
b908f067 UH |
276 | now = time(NULL); |
277 | } while ((done > now) && (bytes_read > 0)); | |
278 | ||
279 | /* Reset the LA8 sequencer logic and close the USB port. */ | |
1644fb24 | 280 | (void) la8_close_usb_reset_sequencer(devc); /* Ignore errors. */ |
b908f067 | 281 | |
f3a35908 | 282 | sr_dbg("Device reset finished."); |
b908f067 UH |
283 | |
284 | return SR_OK; | |
285 | } | |
286 | ||
014359e3 | 287 | SR_PRIV int configure_probes(const struct sr_dev_inst *sdi) |
b908f067 | 288 | { |
014359e3 | 289 | struct dev_context *devc; |
b908f067 UH |
290 | const struct sr_probe *probe; |
291 | const GSList *l; | |
292 | uint8_t probe_bit; | |
293 | char *tc; | |
294 | ||
014359e3 | 295 | devc = sdi->priv; |
1644fb24 BV |
296 | devc->trigger_pattern = 0; |
297 | devc->trigger_mask = 0; /* Default to "don't care" for all probes. */ | |
b908f067 | 298 | |
014359e3 | 299 | for (l = sdi->probes; l; l = l->next) { |
b908f067 UH |
300 | probe = (struct sr_probe *)l->data; |
301 | ||
302 | if (!probe) { | |
f3a35908 | 303 | sr_err("%s: probe was NULL.", __func__); |
b908f067 UH |
304 | return SR_ERR; |
305 | } | |
306 | ||
307 | /* Skip disabled probes. */ | |
308 | if (!probe->enabled) | |
309 | continue; | |
310 | ||
311 | /* Skip (enabled) probes with no configured trigger. */ | |
312 | if (!probe->trigger) | |
313 | continue; | |
314 | ||
315 | /* Note: Must only be run if probe->trigger != NULL. */ | |
316 | if (probe->index < 0 || probe->index > 7) { | |
f3a35908 UH |
317 | sr_err("%s: Invalid probe index %d, must be " |
318 | "between 0 and 7.", __func__, probe->index); | |
b908f067 UH |
319 | return SR_ERR; |
320 | } | |
321 | ||
b35c8293 | 322 | probe_bit = (1 << (probe->index)); |
b908f067 UH |
323 | |
324 | /* Configure the probe's trigger mask and trigger pattern. */ | |
325 | for (tc = probe->trigger; tc && *tc; tc++) { | |
1644fb24 | 326 | devc->trigger_mask |= probe_bit; |
b908f067 UH |
327 | |
328 | /* Sanity check, LA8 only supports low/high trigger. */ | |
329 | if (*tc != '0' && *tc != '1') { | |
f3a35908 UH |
330 | sr_err("%s: Invalid trigger '%c', only " |
331 | "'0'/'1' supported.", __func__, *tc); | |
b908f067 UH |
332 | return SR_ERR; |
333 | } | |
334 | ||
335 | if (*tc == '1') | |
1644fb24 | 336 | devc->trigger_pattern |= probe_bit; |
b908f067 UH |
337 | } |
338 | } | |
339 | ||
f3a35908 | 340 | sr_dbg("Trigger mask = 0x%x, trigger pattern = 0x%x.", |
1644fb24 | 341 | devc->trigger_mask, devc->trigger_pattern); |
b908f067 UH |
342 | |
343 | return SR_OK; | |
344 | } | |
345 | ||
6f4b1868 | 346 | SR_PRIV int set_samplerate(const struct sr_dev_inst *sdi, uint64_t samplerate) |
b908f067 | 347 | { |
1644fb24 | 348 | struct dev_context *devc; |
b908f067 UH |
349 | |
350 | /* Note: Caller checked that sdi and sdi->priv != NULL. */ | |
351 | ||
1644fb24 | 352 | devc = sdi->priv; |
b908f067 | 353 | |
f3a35908 | 354 | sr_spew("Trying to set samplerate to %" PRIu64 "Hz.", samplerate); |
b908f067 UH |
355 | |
356 | fill_supported_samplerates_if_needed(); | |
357 | ||
358 | /* Check if this is a samplerate supported by the hardware. */ | |
359 | if (!is_valid_samplerate(samplerate)) | |
360 | return SR_ERR; | |
361 | ||
362 | /* Set the new samplerate. */ | |
1644fb24 | 363 | devc->cur_samplerate = samplerate; |
b908f067 | 364 | |
f3a35908 | 365 | sr_dbg("Samplerate set to %" PRIu64 "Hz.", devc->cur_samplerate); |
b908f067 UH |
366 | |
367 | return SR_OK; | |
368 | } | |
369 | ||
370 | /** | |
371 | * Get a block of data from the LA8. | |
372 | * | |
1644fb24 BV |
373 | * @param devc The struct containing private per-device-instance data. Must not |
374 | * be NULL. devc->ftdic must not be NULL either. | |
b908f067 UH |
375 | * @return SR_OK upon success, or SR_ERR upon errors. |
376 | */ | |
1644fb24 | 377 | SR_PRIV int la8_read_block(struct dev_context *devc) |
b908f067 UH |
378 | { |
379 | int i, byte_offset, m, mi, p, index, bytes_read; | |
380 | time_t now; | |
381 | ||
1644fb24 | 382 | /* Note: Caller checked that devc and devc->ftdic != NULL. */ |
b908f067 | 383 | |
f3a35908 | 384 | sr_spew("Reading block %d.", devc->block_counter); |
b908f067 | 385 | |
1644fb24 | 386 | bytes_read = la8_read(devc, devc->mangled_buf, BS); |
b908f067 UH |
387 | |
388 | /* If first block read got 0 bytes, retry until success or timeout. */ | |
1644fb24 | 389 | if ((bytes_read == 0) && (devc->block_counter == 0)) { |
b908f067 | 390 | do { |
f3a35908 | 391 | sr_spew("Reading block 0 (again)."); |
1644fb24 | 392 | bytes_read = la8_read(devc, devc->mangled_buf, BS); |
b908f067 UH |
393 | /* TODO: How to handle read errors here? */ |
394 | now = time(NULL); | |
1644fb24 | 395 | } while ((devc->done > now) && (bytes_read == 0)); |
b908f067 UH |
396 | } |
397 | ||
398 | /* Check if block read was successful or a timeout occured. */ | |
399 | if (bytes_read != BS) { | |
f3a35908 | 400 | sr_err("Trigger timed out. Bytes read: %d.", bytes_read); |
1644fb24 | 401 | (void) la8_reset(devc); /* Ignore errors. */ |
b908f067 UH |
402 | return SR_ERR; |
403 | } | |
404 | ||
405 | /* De-mangle the data. */ | |
f3a35908 | 406 | sr_spew("Demangling block %d.", devc->block_counter); |
1644fb24 | 407 | byte_offset = devc->block_counter * BS; |
b908f067 UH |
408 | m = byte_offset / (1024 * 1024); |
409 | mi = m * (1024 * 1024); | |
410 | for (i = 0; i < BS; i++) { | |
411 | p = i & (1 << 0); | |
412 | index = m * 2 + (((byte_offset + i) - mi) / 2) * 16; | |
1644fb24 BV |
413 | index += (devc->divcount == 0) ? p : (1 - p); |
414 | devc->final_buf[index] = devc->mangled_buf[i]; | |
b908f067 UH |
415 | } |
416 | ||
417 | return SR_OK; | |
418 | } | |
419 | ||
1644fb24 | 420 | SR_PRIV void send_block_to_session_bus(struct dev_context *devc, int block) |
b908f067 UH |
421 | { |
422 | int i; | |
423 | uint8_t sample, expected_sample; | |
424 | struct sr_datafeed_packet packet; | |
425 | struct sr_datafeed_logic logic; | |
426 | int trigger_point; /* Relative trigger point (in this block). */ | |
427 | ||
1644fb24 | 428 | /* Note: No sanity checks on devc/block, caller is responsible. */ |
b908f067 UH |
429 | |
430 | /* Check if we can find the trigger condition in this block. */ | |
431 | trigger_point = -1; | |
1644fb24 | 432 | expected_sample = devc->trigger_pattern & devc->trigger_mask; |
b908f067 UH |
433 | for (i = 0; i < BS; i++) { |
434 | /* Don't continue if the trigger was found previously. */ | |
1644fb24 | 435 | if (devc->trigger_found) |
b908f067 UH |
436 | break; |
437 | ||
438 | /* | |
439 | * Also, don't continue if triggers are "don't care", i.e. if | |
440 | * no trigger conditions were specified by the user. In that | |
441 | * case we don't want to send an SR_DF_TRIGGER packet at all. | |
442 | */ | |
1644fb24 | 443 | if (devc->trigger_mask == 0x00) |
b908f067 UH |
444 | break; |
445 | ||
1644fb24 | 446 | sample = *(devc->final_buf + (block * BS) + i); |
b908f067 | 447 | |
1644fb24 | 448 | if ((sample & devc->trigger_mask) == expected_sample) { |
b908f067 | 449 | trigger_point = i; |
1644fb24 | 450 | devc->trigger_found = 1; |
b908f067 UH |
451 | break; |
452 | } | |
453 | } | |
454 | ||
455 | /* If no trigger was found, send one SR_DF_LOGIC packet. */ | |
456 | if (trigger_point == -1) { | |
457 | /* Send an SR_DF_LOGIC packet to the session bus. */ | |
f3a35908 UH |
458 | sr_spew("Sending SR_DF_LOGIC packet (%d bytes) for " |
459 | "block %d.", BS, block); | |
b908f067 UH |
460 | packet.type = SR_DF_LOGIC; |
461 | packet.payload = &logic; | |
462 | logic.length = BS; | |
463 | logic.unitsize = 1; | |
1644fb24 | 464 | logic.data = devc->final_buf + (block * BS); |
3e9b7f9c | 465 | sr_session_send(devc->cb_data, &packet); |
b908f067 UH |
466 | return; |
467 | } | |
468 | ||
469 | /* | |
470 | * We found the trigger, so some special handling is needed. We have | |
471 | * to send an SR_DF_LOGIC packet with the samples before the trigger | |
472 | * (if any), then the SD_DF_TRIGGER packet itself, then another | |
473 | * SR_DF_LOGIC packet with the samples after the trigger (if any). | |
474 | */ | |
475 | ||
476 | /* TODO: Send SR_DF_TRIGGER packet before or after the actual sample? */ | |
477 | ||
478 | /* If at least one sample is located before the trigger... */ | |
479 | if (trigger_point > 0) { | |
480 | /* Send pre-trigger SR_DF_LOGIC packet to the session bus. */ | |
f3a35908 UH |
481 | sr_spew("Sending pre-trigger SR_DF_LOGIC packet, " |
482 | "start = %d, length = %d.", block * BS, trigger_point); | |
b908f067 UH |
483 | packet.type = SR_DF_LOGIC; |
484 | packet.payload = &logic; | |
485 | logic.length = trigger_point; | |
486 | logic.unitsize = 1; | |
1644fb24 | 487 | logic.data = devc->final_buf + (block * BS); |
3e9b7f9c | 488 | sr_session_send(devc->cb_data, &packet); |
b908f067 UH |
489 | } |
490 | ||
491 | /* Send the SR_DF_TRIGGER packet to the session bus. */ | |
f3a35908 | 492 | sr_spew("Sending SR_DF_TRIGGER packet, sample = %d.", |
b908f067 UH |
493 | (block * BS) + trigger_point); |
494 | packet.type = SR_DF_TRIGGER; | |
495 | packet.payload = NULL; | |
3e9b7f9c | 496 | sr_session_send(devc->cb_data, &packet); |
b908f067 UH |
497 | |
498 | /* If at least one sample is located after the trigger... */ | |
499 | if (trigger_point < (BS - 1)) { | |
500 | /* Send post-trigger SR_DF_LOGIC packet to the session bus. */ | |
f3a35908 UH |
501 | sr_spew("Sending post-trigger SR_DF_LOGIC packet, " |
502 | "start = %d, length = %d.", | |
b908f067 UH |
503 | (block * BS) + trigger_point, BS - trigger_point); |
504 | packet.type = SR_DF_LOGIC; | |
505 | packet.payload = &logic; | |
506 | logic.length = BS - trigger_point; | |
507 | logic.unitsize = 1; | |
1644fb24 | 508 | logic.data = devc->final_buf + (block * BS) + trigger_point; |
3e9b7f9c | 509 | sr_session_send(devc->cb_data, &packet); |
b908f067 UH |
510 | } |
511 | } |