]>
Commit | Line | Data |
---|---|---|
24a04d22 UH |
1 | 0.1.7 (2019-11-14) |
2 | ------------------ | |
3 | ||
4 | * Add firmware for the YiXingDianZi MDSO (VID/PID: 1D50:608E). | |
5 | * Sainsmart DDS120: Fix the 1kHz reference signal. | |
6 | * Hantek 6022BL: Fix the voltage range selection (bug #1360). | |
7 | * Allow LA captures at 48MHz samplerate (as long as bus conditions permit). | |
8 | * Updated build requirement: sdcc >= 3.4.0 (bug #1326). | |
9 | * Fix a build issue with sdcc >= 3.9.0 (bug #1404). | |
10 | * Bump the firmware version (major.minor) to 1.4. This version is | |
11 | backwards-compatible and doesn't require host-side (libsigrok) changes. | |
12 | ||
f3e9593b UH |
13 | 0.1.6 (2018-01-26) |
14 | ------------------ | |
15 | ||
16 | * Fix an issue with FX2 based logic analyzers that could cause non-working | |
17 | and/or prematurely aborted acquisitions (bug #655). | |
18 | * FX2 based logic analyzers will now toggle pin PA1 during acquisition, | |
19 | and keep it high while idle. On fx2grok-tiny and fx2grok-flat devices | |
20 | there's a LED connected to PA1. Thus, those devices will visually indicate | |
21 | whether a firmware has been uploaded (LED will light up and stay like that | |
22 | while the device is idle). During any acquisition the LED will blink. | |
23 | * Refactor the oscilloscope code to avoid duplication (bug #984). | |
24 | * Fix a 'make distclean' error. | |
25 | * Fix a compiler warning with recent sdcc versions (e.g. v3.6.9). | |
26 | ||
dd90e9e1 UH |
27 | 0.1.5 (2017-06-12) |
28 | ------------------ | |
29 | ||
30 | * Add FX2 firmware for the Hantek 6022BL USB scope/LA. | |
31 | * HACKING: Update URL to Linux kernel coding style. | |
32 | * Remove FSF postal address from boiler plate license text. | |
33 | ||
1940f9fc UH |
34 | 0.1.4 (2016-10-31) |
35 | ------------------ | |
36 | ||
37 | * Add FX2 firmware for the Hantek 6022BE and SainSmart DDS120 USB scopes. | |
38 | These firmware files use the official sigrok USB VID/PID of 1D50:608E. | |
39 | The USB VID/PID pairs are allocated for fx2lafw via the OpenMoko project: | |
40 | http://wiki.openmoko.org/wiki/USB_Product_IDs | |
41 | * Add analog channel support for the USBee AX (and potentially other devices). | |
42 | Only one analog channel is supported. Switching channels (in case there | |
43 | are multiple analog channels) is not yet implemented. | |
44 | * Add support for the USBee ZX (bug #764). | |
45 | * Use per-device USB product string descriptors. | |
46 | * Bump the firmware version (major.minor) to 1.2. This version is | |
47 | backwards-compatible and doesn't require host-side (libsigrok) changes. | |
48 | * README: Update prebuilt firmware download location, other cleanups. | |
49 | * HACKING: Prefer git pull requests over mailing list patches. | |
50 | ||
ca7b6c32 UH |
51 | 0.1.3 (2015-11-26) |
52 | ------------------ | |
53 | ||
54 | * README: Drop references to obsolete sigrok-commits mailing list. | |
55 | * Build system: | |
56 | - Use non-recursive Make setup. | |
57 | - Simplify and/or improve various parts of the build system. | |
58 | - configure: Check the sdcc version (bug #696). | |
59 | * Add firmware files for FX2 devices with official sigrok VID/PID: | |
60 | - 1D50:608C: fx2lafw-sigrok-fx2-8ch.fw | |
61 | - 1D50:608D: fx2lafw-sigrok-fx2-16ch.fw | |
62 | The USB VID/PID pairs are allocated for fx2lafw via the OpenMoko project: | |
63 | http://wiki.openmoko.org/wiki/USB_Product_IDs | |
64 | ||
75a66a81 UH |
65 | 0.1.2 (2014-05-06) |
66 | ------------------ | |
67 | ||
68 | * Fix an issue which lead to the data pins not being tri-stated after an | |
69 | aquisition (when the GPIF is idle) but rather being driven. | |
70 | * Bump the firmware version (major.minor) to 1.1. This version is | |
71 | backwards-compatible and doesn't require host-side (libsigrok) changes. | |
72 | ||
b77e3182 | 73 | 0.1.1 (2013-04-16) |
0a7ae4e2 UH |
74 | ------------------ |
75 | ||
76 | * Add support for the USBee DX. Only digital sampling is supported (as is | |
77 | the case for all other supported devices so far). Analog data acquisition | |
78 | is currently not implemented. | |
9e7a268d UH |
79 | * Add support for devices with the older Cypress CY7C68013 (FX2) chip |
80 | instead of the more recent Cypress CY7C68013A (FX2LP). See also: | |
81 | http://sigrok.org/wiki/Fx2lafw#Cypress_FX2_vs._FX2LP | |
0a7ae4e2 UH |
82 | * Convert to a standard autotools based build/configuration system. |
83 | Installation is now: ./configure && make && make install | |
84 | * README: Update status, website URLs, requirements, etc. | |
85 | * Add the usual HACKING, AUTHORS, and INSTALL files. | |
86 | * Add a 'distbin' Make target, which creates a convenience tarball | |
87 | containing just the generated *.fw files. | |
c610cc7e | 88 | * Document the download location for the pre-built firmware files tarball. |
0a7ae4e2 | 89 | * If 'objcopy' is not found, try to use sdcc's 'makebin' instead. |
3bed3f21 | 90 | This fixes the build e.g. on some Mac OS X systems without 'objcopy'. |
3a7ae082 | 91 | * Add support for differently named sdcc tools on various distros. |
0a7ae4e2 | 92 | |
d319a25d | 93 | 0.1.0 (2012-07-24) |
6a90b4a9 UH |
94 | ------------------ |
95 | ||
96 | * Initial release. | |
97 |