Yokogawa DLM2000 series
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
 | |
| Status | supported |
|---|---|
| Source code | yokogawa-dlm |
| Channels | 2 or 4 |
| Samplerate | 2.5GSa/s (2chs interleaved), 1.25GSa/s |
| Analog bandwidth | 200-500MHz (depending on model) |
| Vertical resolution | 8bits |
| Input impedance | 1MΩ‖20pF 150V RMS CAT I or 50Ω 5V RMS |
| Memory | 6.25 to 250Mpts (model/mode-dependent) |
| Display | 8.4" 1024x768 |
| Connectivity | USB host/device, Ethernet (optional), Trigger in/out, GO/NOGO, VGA out |
| Website | yokogawa.com |
The Yokogawa DLM2000 series are 2- or 4-channel oscilloscopes with an analog bandwidth of 200-500MHz and 2.5GS/s sampling rate. See Yokogawa DLM2000 series/Info for more details (such as lsusb -v output) about the device.
Due to Yokogawa's focus on the controls industry, their oscilloscopes offer extensive analysis and reporting features.
Devices
| Model | Bandwidth | Channels |
|---|---|---|
| DLM2022 | 200MHz | 2 |
| DLM2032 | 350MHz | 2 |
| DLM2052 | 500MHz | 2 |
| DLM2024 | 200MHz | 4 analog / 3 analog+8 digital |
| DLM2034 | 350MHz | 4 analog / 3 analog+8 digital |
| DLM2054 | 500MHz | 4 analog / 3 analog+8 digital |
Photos
Device, front
Device, back
PBL250 logic probe
Protocol
The device uses GPIB, USBTMC or LXI via its ethernet port for communication with a host PC. The protocol is based on SCPI commands.