Difference between revisions of "Yokogawa DLM2000 series"

From sigrok
Jump to navigation Jump to search
m (Add GPIB)
 
Line 47: Line 47:
== Protocol ==
== Protocol ==


The device uses [[USBTMC]] or LXI via its ethernet port for communication with a host PC. The protocol is based on SCPI commands.
The device uses [[GPIB]], [[USBTMC]] or LXI via its ethernet port for communication with a host PC. The protocol is based on SCPI commands.


== Resources ==
== Resources ==

Latest revision as of 21:25, 1 September 2014

Yokogawa DLM2000 series
Yokogawa DLM2000 front.png
Status supported
Source code yokogawa-dlm
Channels 2 or 4
Samplerate 2.5GSa/s (2chs interleaved), 1.25GSa/s
Analog bandwidth 200-500MHz (depending on model)
Vertical resolution 8bits
Input impedance 1MΩ‖20pF 150V RMS CAT I or 50Ω 5V RMS
Memory 6.25 to 250Mpts (model/mode-dependent)
Display 8.4" 1024x768
Connectivity USB host/device, Ethernet (optional), Trigger in/out, GO/NOGO, VGA out
Website yokogawa.com

The Yokogawa DLM2000 series are 2- or 4-channel oscilloscopes with an analog bandwidth of 200-500MHz and 2.5GS/s sampling rate. See Yokogawa DLM2000 series/Info for more details (such as lsusb -v output) about the device.

Due to Yokogawa's focus on the controls industry, their oscilloscopes offer extensive analysis and reporting features.

Devices

Model Bandwidth Channels
DLM2022 200MHz 2
DLM2032 350MHz 2
DLM2052 500MHz 2
DLM2024 200MHz 4 analog / 3 analog+8 digital
DLM2034 350MHz 4 analog / 3 analog+8 digital
DLM2054 500MHz 4 analog / 3 analog+8 digital

Photos

Protocol

The device uses GPIB, USBTMC or LXI via its ethernet port for communication with a host PC. The protocol is based on SCPI commands.

Resources