Difference between revisions of "Yokogawa DLM2000 series"

From sigrok
Jump to navigation Jump to search
Line 2: Line 2:
| image              = [[File:Yokogawa_DLM2000_front.png|180px]]
| image              = [[File:Yokogawa_DLM2000_front.png|180px]]
| name                = Yokogawa DLM2000 Series
| name                = Yokogawa DLM2000 Series
| status              = planned
| status              = in progress
| source_code_dir    = yokogawa-dlm
| source_code_dir    = yokogawa-dlm
| channels            = 2 or 4
| channels            = 2 or 4
Line 59: Line 59:
[[Category:Oscilloscope]]
[[Category:Oscilloscope]]
[[Category:Mixed-signal oscilloscope]]
[[Category:Mixed-signal oscilloscope]]
[[Category:In progress]]

Revision as of 20:51, 26 August 2014

Yokogawa DLM2000 Series
Yokogawa DLM2000 front.png
Status in progress
Source code yokogawa-dlm
Channels 2 or 4
Samplerate 2.5GSa/s (2chs interleaved), 1.25GSa/s
Analog bandwidth 200-500MHz (depending on model)
Vertical resolution 8bits
Input impedance 1MΩ‖20pF 150V RMS CAT I or 50Ω 5V RMS
Memory 6.25 to 250Mpts (model/mode-dependent)
Display 8.4" 1024x768
Connectivity USB host/device, Ethernet (optional), Trigger in/out, GO/NOGO, VGA out
Website yokogawa.com

The Yokogawa DLM2000 Series are 2- or 4-channel oscilloscopes with an analog bandwidth of 200-500MHz and 2.5GS/s sampling rate. See Yokogawa DLM2000 series/Info for more details (such as lsusb -v output) about the device.

Due to Yokogawa's focus on the controls industry, their oscilloscopes offer extensive analysis and reporting features.

Devices

Model Bandwidth channels
DLM2022 200MHz 2
DLM2032 350MHz 2
DLM2052 500MHz 2
DLM2024 200MHz 4 analog / 3 analog+8 digital
DLM2034 350MHz 4 analog / 3 analog+8 digital
DLM2054 500MHz 4 analog / 3 analog+8 digital

Photos

Protocol

The device uses USBTMC or LXI via its ethernet port for communication with a host PC. The protocol is based on SCPI commands.

Resources