Difference between revisions of "XZL Studio DX"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m |
Uwe Hermann (talk | contribs) m |
||
(5 intermediate revisions by 2 users not shown) | |||
Line 1: | Line 1: | ||
{{DISPLAYTITLE:XZL_Studio DX}} | |||
{{Infobox logic analyzer | |||
| image = | |||
| name = XZL_Studio DX | |||
| status = planned | |||
| source_code_dir = fx2lafw | |||
| channels = 8/16 | |||
| samplerate = 24MHz | |||
| samplerate_state = — | |||
| triggers = none (SW-only) | |||
| voltages = ? | |||
| memory = none | |||
| compression = none | |||
| website = [http://www.hotmcu.com/xzl-studio-dx-mixed-signal-oscilloscope-logic-analyzer-p-13.html hotmcu.com] | |||
}} | |||
The '''XZL_Studio DX''' is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels. | |||
It is a clone of the [[CWAV USBee DX]]. | It is a clone of the [[CWAV USBee DX]]. | ||
See [[ | See [[XZL_Studio DX/Info]] for some more details (such as '''lsusb -vvv''' output) on the device. | ||
'''Note''': Due to the fact that this device has two FX2 chips behind a USB hub inside, this will need extra code to enumerate correctly in sigrok. Do you have this device? Let us know! | |||
== Hardware == | == Hardware == | ||
* Main chip: | * '''Main chip''': 2x Cypress CY7C68013A-56PVXC (FX2LP) | ||
* ADC: | * '''ADC''': 2x Texas Instruments TLC5510 (SO 24pin package) | ||
* I2C EEPROM: Atmel ATML H136 24C02C M Y, place for second EEPROM chip. | * '''I2C EEPROM''': Atmel ATML H136 24C02C M Y, place for second EEPROM chip. | ||
* USB 2.0 Hub: SMSC USB2512A (QFN 36-pin package) | * '''USB 2.0 Hub''': SMSC USB2512A (QFN 36-pin package) | ||
* Low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3 | * '''Low-dropout voltage regulator''': Advanced Monolithic Systems AMS1117-3.3 | ||
* 24MHz | * '''Crystal''': 24MHz | ||
* ... | * ... | ||
Line 21: | Line 39: | ||
== Protocol == | == Protocol == | ||
Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol. | |||
== Resources == | == Resources == | ||
Line 31: | Line 49: | ||
[[Category:Oscilloscope]] | [[Category:Oscilloscope]] | ||
[[Category:Mixed-signal oscilloscope]] | [[Category:Mixed-signal oscilloscope]] | ||
[[Category:Planned]] |
Revision as of 10:33, 18 March 2013
Status | planned |
---|---|
Source code | fx2lafw |
Channels | 8/16 |
Samplerate | 24MHz |
Samplerate (state) | — |
Triggers | none (SW-only) |
Min/max voltage | ? |
Memory | none |
Compression | none |
Website | hotmcu.com |
The XZL_Studio DX is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.
It is a clone of the CWAV USBee DX.
See XZL_Studio DX/Info for some more details (such as lsusb -vvv output) on the device.
Note: Due to the fact that this device has two FX2 chips behind a USB hub inside, this will need extra code to enumerate correctly in sigrok. Do you have this device? Let us know!
Hardware
- Main chip: 2x Cypress CY7C68013A-56PVXC (FX2LP)
- ADC: 2x Texas Instruments TLC5510 (SO 24pin package)
- I2C EEPROM: Atmel ATML H136 24C02C M Y, place for second EEPROM chip.
- USB 2.0 Hub: SMSC USB2512A (QFN 36-pin package)
- Low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3
- Crystal: 24MHz
- ...
Photos
TODO.
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.
Resources
TODO.