Difference between revisions of "XZL Studio DX"

From sigrok
Jump to navigation Jump to search
m
Line 1: Line 1:
{{Infobox logic analyzer
{{Infobox logic analyzer
| image            =  
| image            =  
| name            = XZL Studio DX
| name            = XZL_Studio DX
| status          = planned
| status          = planned
| source_code_dir  = fx2lafw
| source_code_dir  = fx2lafw
Line 14: Line 14:
}}
}}


The '''XZL Studio DX''' is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.
The '''XZL_Studio DX''' is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.


It is a clone of the [[CWAV USBee DX]].
It is a clone of the [[CWAV USBee DX]].

Revision as of 09:28, 18 March 2013

XZL_Studio DX
Status planned
Source code fx2lafw
Channels 8/16
Samplerate 24MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage ?
Memory none
Compression none
Website hotmcu.com

The XZL_Studio DX is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

It is a clone of the CWAV USBee DX.

See XZL Studio DX/Info for some more details (such as lsusb -vvv output) on the device.

Note: Due to the fact that this device has two FX2 chips behind a USB hub inside, this will need extra code to enumerate correctly in sigrok. Do you have this device? Let us know!

Hardware

  • Main chip: 2x Cypress CY7C68013A-56PVXC (FX2LP)
  • ADC: 2x Texas Instruments TLC5510 (SO 24pin package)
  • I2C EEPROM: Atmel ATML H136 24C02C M Y, place for second EEPROM chip.
  • USB 2.0 Hub: SMSC USB2512A (QFN 36-pin package)
  • Low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3
  • Crystal: 24MHz
  • ...

Photos

TODO.

Protocol

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

Resources

TODO.