XZL_Studio DX

From sigrok
Jump to navigation Jump to search
XZL_Studio DX
Status planned
Source code fx2lafw
Channels 16 + 2
Samplerate 24MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage Digital 0 — 5.4V
Analog ±10V
Threshold voltage Fixed: VIH=1.4V, VIL=0.8V
Memory none
Compression none
Website hotmcu.com

The XZL_Studio DX is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

It is a clone of the CWAV USBee DX.

See XZL_Studio DX/Info for some more details (such as lsusb -vvv output) on the device.

Note: Due to the fact that this device has two FX2 chips behind a USB hub inside, this will need extra code to enumerate correctly in sigrok. Do you have this device? Let us know!

Hardware

Two jumpers:

  • P1 jumper - WRITE PROTECT, Connects WP EEPROM pin [7] to Vcc. If pin is closed, Write Protection is enabled.
  • P3 jumper - EEPROM CONNECTION, connects SDA EEPROM pin [5] to some pin on second CY7C68013A (if open there is no connection)

Photos

Protocol

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

Resources

TODO.