Difference between revisions of "XZL Studio AX"

From sigrok
Jump to navigation Jump to search
m
m
Line 1: Line 1:
{{DISPLAYTITLE:XZL_Studio AX}}
{{DISPLAYTITLE:XZL_Studio AX}}
{{Infobox logic analyzer
{{Infobox logic analyzer
| image            =  
| image            = [[File:Studio XZL AX.jpeg|180px]]
| name            = XZL_Studio AX
| name            = XZL_Studio AX
| status          = supported
| status          = supported

Revision as of 12:22, 3 May 2013

XZL_Studio AX
Studio XZL AX.jpeg
Status supported
Source code fx2lafw
Channels 8
Samplerate 24MHz
Samplerate (state)
Triggers 1 independent trigger + (SW-probe 0,1)
Min/max voltage Digital: 0V — 5.3V (Vlow < 0.8V, Vhigh > 1.4V)
Analog: -10V — +10V
Memory none
Compression none
Website hotmcu.com

The XZL_Studio AX is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

It is a clone of the CWAV USBee AX-Pro.

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

Note: Only the logic analyzer functionality is supported so far, analog support is work in progress, as is the independent trigger.

See XZL_Studio AX/Info for some more details (such as lsusb -vvv output) on the device.

Hardware

  • Main chip: Cypress CY7C68013A-56LTXC (FX2LP)
  • ADC: 1x Texas Instruments TLC5510I (SO 24pin package)
  • I2C EEPROM: Atmel 24C02C
  • Low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3
  • Crystal: 24MHz
  • ...

Photos

Protocol

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

Resources

TODO.