Voltcraft M-3650CR
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
 | |
| Status | supported |
|---|---|
| Source code | serial-dmm |
| Counts | 2000 |
| IEC 61010-1 | — |
| Connectivity | RS232 |
| Measurements | voltage, current, resistance, capacitance, hFE, diode, continuity, frequency, logic |
| Features | data hold, bargraph, difference |
The Voltcraft M-3650CR is a 2000 counts handheld digital multimeter with RS232 connectivity.
It came into the market 1991 and is a rebadged Metex M-3650CR.
Hardware
Multimeter:
- Fuse: 2A/250V (5x20mm) (for the A jack; the 20A jack is unfused!)
- TODO.
RS232 cable:
Photos
Multimeter:
Package
Package, open
Device, front
Device, right side
Device, back
Device, size
Device, display self test on power on.
Device with test probes
Battery pack opened
Device opened
RS232 cable:
See Device_cables#Metex_5-pin_RS232_cable.
Protocol
The protocol is (partially) documented in the manual of the Voltcraft M-3650CR and was determined completely by testing. See Multimeter ICs#Alternative Protocol.
Resources
Measurement functions and ranges
| Measurement function | Range | Resolution | Accuracy | sigrok result | Remarks |
|---|---|---|---|---|---|
| V= | 200.0 mV | 100 μV | ±(0.3% + 1) | mq V, unit V, mqflags DC | |
| 2.000 V | 1 mV | " | |||
| 20.00 V | 10 mV | " | |||
| 200.0 V | 100 mV | " | |||
| 1000 V | 1 V | " | |||
| V≈ | 200.0 mV | 100 μV | ±(0.8% + 3) | mq V, unit V, mqflags AC | |
| 2.000 V | 1 mV | " | |||
| 20.00 V | 10 mV | " | |||
| 200.0 V | 100 mV | " | |||
| 750 V | 1 V | ±(1.2% + 3) | " | ||
| A= | 2.000 mA | 1 µA | ±(0.5% + 1) | mq Curr., unit A, mqflags DC | |
| 200.0 mA | 100 µA | ±(1,2% + 1) | " | ||
| 20.00 A | 10 mA | ±(2,0% + 5) | " | Max. 20 min.; unfused! | |
| A≈ | 2.000 mA | 10 µA | ±(1,0% + 5) | mq Curr., unit A, mqflags AC | |
| 200.0 mA | 100 µA | ±(1,8% + 5) | " | ||
| 20.00 A | 10 mA | ±(3.0% + 7) | " | Max. 20 min.; unfused! | |
| Ω | 200.0 Ω | 100 mΩ | mq Res., unit Ω, mqflags - | ||
| 2.000 kΩ | 1 Ω | " | |||
| 20.00 kΩ | 10 Ω | " | |||
| 200.0 kΩ | 100 Ω | " | |||
| 2.000 MΩ | 1 kΩ | " | |||
| 20.00 MΩ | 10 kΩ | " | |||
| Cap. F | 2000 pF | 1 pF | ±(2.0% + 3) | mq Cap., unit F, mqflags - | |
| 200.0 nF | 100 pF | " | |||
| 20.00 µF | 10 nF | ±(3.0% + 5) | " | ||
| Hz= | 20.00 kHz | 1 Hz | ±(2% + 3) | mq Freq., unit Hz, mqflags DC | |
| 200.00 kHz | 10 Hz | " | |||
| Logic | - | ||||
| hFE | ? | IB=10 µA, UCE=2,8 V | |||
| Diode | mq V, unit V, mqflags DC,DIODE | ||||
| Data Hold | - | Not supported by protocol. |
The column "sigrok result" contains in short form what the driver generates for the resp. data type.