Sysclk LWLA1016

From sigrok
Revision as of 20:01, 21 August 2016 by Uwe Hermann (talk | contribs) (Firmware instructions.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Sysclk LWLA1016
Sysclk lwla1016.png
Status supported
Source code sysclk-lwla
Channels 16/8
Samplerate 100/200/250 MHz
Samplerate (state) ?
Triggers only in 100MHz mode
Min/max voltage ?
Threshold voltage ?
Memory 512Kbit/channel, or 256Kbit/channel with RLE
Compression optional RLE
Website taobao.com

The Sysclk LWLA1016 is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate, or up to 250MHz with 8 channels.

Note that sigrok supports only the 100 MHz mode with 16 channels. Supporting the 200/250 MHz 8 channel modes is not worth the effort, since the device does not support triggers in these modes. A non-streaming device without triggers is pretty much useless for any real world application.

See Sysclk LWLA1016/Info for more details (such as lsusb -v output) about the device.

Hardware

TODO.

Photos

Protocol

Reverse engineering of the vendor's custom protocol is complete. See Sysclk LWLA1016/Protocol for the findings gathered.

Firmware

In order to use this device you'll have to place the correct firmware files into a directory where libsigrok is looking for them. See Firmware#Where_to_put_the_firmware_files for the OS-specific details.

For the LWLA1016 we provide a script, which can extract them from the vendor software.

First you'll need to install the (Windows) vendor software and grab a copy of its installation directory, e.g. C:\Program Files\LWLA1016 (or similar, depends on where you installed).

Then:

$ git clone git://sigrok.org/sigrok-util
$ cd sigrok-util/firmware/sysclk-lwla
$ ./sigrok-fwextract-sysclk-lwla1016 LWLA1016
[...]
$ md5sum *.rbf
9ea144768afdd3092712075c23eadca4  sysclk-lwla1016-100.rbf
339d71ee799d3d3dbdcbcf1a00aa9f33  sysclk-lwla1016-100-ts.rbf
77fe7158ee53dcbed3bf390ee753594f  sysclk-lwla1016-200.rbf
e5246f3c1b9e3a34b570af9d50e02cbf  sysclk-lwla1016-200-ts.rbf
d9f587c9f53d0706f25658bc5580e4f7  sysclk-lwla1016-250.rbf
9d8c284bdbcfbad88aab9c2a79eb783d  sysclk-lwla1016-250-ts.rbf

Finally, copy all the extracted *.rbf files to the directory where libsigrok will look for them.

Resources

TODO.