Difference between revisions of "Saleae Logic Pro 16"

From sigrok
Jump to navigation Jump to search
m (fix typo)
m (removed irrelevant content)
Line 19: Line 19:


The case requires a '''Torx T9''' screwdriver to open.
The case requires a '''Torx T9''' screwdriver to open.
See [[Saleae Logic16/Info]] for more details (such as '''lsusb -vvv''' output) about the device.


See [[Saleae Logic]] and [[Saleae Logic16]]  for the predecessor products of the Saleae Logic Pro16.  
See [[Saleae Logic]] and [[Saleae Logic16]]  for the predecessor products of the Saleae Logic Pro16.  

Revision as of 20:36, 4 November 2014

[[File:

Saleae Logic Pro 16
Saleae Logic Pro 16 bottom.jpg
Status unsupported
Channels 16
Samplerate 500/100/50/25/20MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage -50 — 50V tolerant
Threshold voltage 1.2V to 5.5V digital, 0 to 10V analog
Memory none
Compression yes
Website [1]

The Saleae Logic Pro 16 is a USB 3.0-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels). It supports analog sampling on all 16 channels. It is part of the second-generation Saleae Logic series, which consists of the Logic 4 and 8, and the Pro 8 and 16.

The case requires a Torx T9 screwdriver to open.

See Saleae Logic and Saleae Logic16 for the predecessor products of the Saleae Logic Pro16.

Hardware

There are several testpoints on the underside of the PCB. It is not yet certain what these are for. There is no visible JTAG header.

Photos


Resources