Robomotic MiniLogic
Revision as of 23:36, 16 December 2012 by Uwe Hermann (talk | contribs)
 | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | ? |
| Memory | none |
| Compression | none |
| Website | robomotic.com |
The Robomotic MiniLogic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
See Robomotic MiniLogic/Info for more details (such as lsusb -vvv output) about the device.
Hardware
- Main chip: Cypress CY7C68013A-56PVXC (FX2LP) (datasheet)
- Octal 3-state non-inverting buffer/line-driver/line-receiver: 74HC244A (TODO: vendor?)
- 1A low-dropout voltage regulator (3.3V): Advanced Monolithic Systems AMS1117-3.3 (datasheet)
- 2K I2C serial EEPROM: 2x Microchip 24LC02BI (datasheet)
- 64K I2C serial EEPROM: Microchip 24LC64I (datasheet)
Photos
Device, front
Device, back
PCB, front
PCB, back
Cypress FX2
74HC244A
AMS1117
2x Microchip 24LC02BI
Microchip 24LC64I
See also this flickr set for more photos of the device.
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.
Resources
TODO.