Difference between revisions of "Rigol DS2072"

From sigrok
Jump to navigation Jump to search
Line 18: Line 18:


The [http://www.rigolna.com/products/digital-oscilloscopes/ds2000/ds2072/ Rigol DS2072] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 70MHz and 2GS/s sampling rate.
The [http://www.rigolna.com/products/digital-oscilloscopes/ds2000/ds2072/ Rigol DS2072] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 70MHz and 2GS/s sampling rate.
The Rigol DS2102 and DS2202 are the models of the series with 100MHz and 200MHz bandwidth, except for small software differences all models in the series are identical.
There exist two versions of the hardware, version 1 and version 2. Version 2 has a redesigned PCB which is prepared for additional modules, a signal generator and apparently a logic analyzer. Additionally version 2 hardware has the hardware fitted to switch the input impedance to 50 ohms. This is only accessible through SCPI commands, the option in the menu is disabled (as of firmware version 01.01.00.02).


See [[Rigol DS2072/Info]] for more details (such as '''lsusb -v''' output) about the device.
See [[Rigol DS2072/Info]] for more details (such as '''lsusb -v''' output) about the device.


== Hardware ==
See [[Rigol DS2000 Series]] for information common to all devices in this series.
 
TODO.


== Photos ==
== Photos ==
Line 39: Line 33:
</gallery>
</gallery>


== Protocol ==
== More Info ==
 
The device uses [[USBTMC]] or LXI via its ethernet port for communication with a host PC.
 
== Resources ==
 
* [http://www.eevblog.com/forum/testgear/first-impressions-and-review-of-the-rigol-ds2072-ds2000-series-dso/ EEVblog forums: Review of the Rigol DS2072]
* [http://www.eevblog.com/2012/09/26/eevblog-360-rigol-ds2000-oscilloscope-teardown/ EEVblog: Teardown video of the Rigol DS2202]
* [http://www.flickr.com/photos/eevblog/sets/72157631618295437/ High resolution images of the innards of Rigol DS2202 from EEVblog]


[[Category:Device]]
[[Category:Device]]
[[Category:Oscilloscope]]
[[Category:Oscilloscope]]
[[Category:Supported]]
[[Category:Supported]]

Revision as of 01:01, 6 January 2014

Rigol DS2072
Rigol-ds2072 mugshot.png
Status supported
Source code rigol-ds
Channels 2
Samplerate 2GSa/s (1ch), 1GSa/s (2ch)
Analog bandwidth 70MHz (upgradable up to 300 MHz)
Vertical resolution 8bits
Triggers edge, pulse, runt, windows, nth edge, slope, video, pattern, delay, timeout, duration, setup/hold, RS232/UART, I²C, SPI, CAN, USB
Input impedance 1MΩ‖16pF 300V RMS CAT I
Memory 56Mpts (mode/ch-dependent)
Display 8" 800x480, 160K colors
Connectivity USB host/device, ethernet, trigger out, pass/fail out
Features math: +, —, x, /, FFT, vertical sensitivity: 500µV/div - 10V/div
Website rigolna.com

The Rigol DS2072 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 70MHz and 2GS/s sampling rate.

See Rigol DS2072/Info for more details (such as lsusb -v output) about the device.

See Rigol DS2000 Series for information common to all devices in this series.

Photos

  • Device, front

  • Device, back

  • Connectors on left side

  • Device, right side

  • Device showing a waveform

More Info

Retrieved from "https://sigrok.org/w/index.php?title=Rigol_DS2072&oldid=8371"