Rigol DS1000Z series

From sigrok
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Rigol DS1000Z Series
Rigol DS1074Z front.png
Status supported
Channels 4
Samplerate 1GSa/s (1ch), 500MSa/s (2ch), 250MSa/s (3 or 4 ch)
Analog bandwidth 50-100MHz (depending on model)
Vertical resolution 8bits
Triggers edge, pulse, runt, windows, nth edge, slope, video, pattern, delay, timeout, duration, setup/hold, RS232/UART, I²C, SPI
Input impedance 1MΩ‖13pF 300V RMS CAT I
Memory 12/24Mpts (mode/ch-dependent)
Display 7 Inch WVGA (800x480) 160,000 colours
Connectivity USB host/device, ethernet (LXI), trigger out, pass/fail out
Features math: +, —, x, /, FFT, vertical sensitivity: 1 mV/div to 10 V/div
Website rigolna.com

The Rigol DS1000Z Series are 4-channel oscilloscopes with an analog bandwidth of 50-100MHz and 1GSa/s maximum sampling rate.


Devices

Model Bandwidth
Rigol DS1054Z 50MHz
Rigol DS1074Z 70MHz
DS1104Z 100MHz

Protocol

The device uses USBTMC or LXI via its Ethernet port for communication with a host PC. The protocol is based on SCPI commands.

If you're getting persistent command errors when attempting to capture via Ethernet (try running sigrok-cli with -l 5), make sure your oscilloscope runs at least firmware version 00.04.03.02.

Resources